From: Anand Moon <linux.amoon@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [RFCv1 0/5] Odroid N2 failes to boot using upstream kernel & u-boot
Date: Mon, 7 Oct 2019 13:16:44 +0000 [thread overview]
Message-ID: <20191007131649.1768-1-linux.amoon@gmail.com> (raw)
We am trying to build the upstream u-boot and upstream kernel,
but it fails to pass the initialization of PWM_MESON driver.
So these patches help boot the kernel on microSD card.
Patchs based on Linux 5.4-rc2
Boot log failed are shown below.
[0] https://pastebin.com/cEtWq2iX
[ 1.569240] meson-gx-mmc ffe05000.sd: Got CD GPIO
[ 1.599227] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
[ 1.600605] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
[ 1.607166] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
[ 1.613273] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
[ 1.619931] hctosys: unable to open rtc device (rtc0)
My guess their is not much issue with eMMC module, if their is
other approach to resolve this issue, I will give this a try.
Best Regards
-Anand
Anand Moon (5):
arm64: dts: meson: Add missing 5V_EN gpio signal for VCC5V regulator
arm64: dts: meson: Add missing pwm control gpio signal for
pwm-regulator
arm64: dts: meson: Add missing regulator linked to VDDAO_3V3 regulator
to FLASH_VDD
arm64: dts: meson: Add missing regulator linked to VCCV5 regulator to
VDDIO_C/TF_IO
arm64/ARM: configs: Change CONFIG_PWM_MESON from m to y
.../arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 13 +++++++++++++
arch/arm64/configs/defconfig | 2 +-
2 files changed, 14 insertions(+), 1 deletion(-)
--
2.23.0
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Subject: [RFCv1 0/5] Odroid N2 failes to boot using upstream kernel & u-boot
Date: Mon, 7 Oct 2019 13:16:44 +0000 [thread overview]
Message-ID: <20191007131649.1768-1-linux.amoon@gmail.com> (raw)
We am trying to build the upstream u-boot and upstream kernel,
but it fails to pass the initialization of PWM_MESON driver.
So these patches help boot the kernel on microSD card.
Patchs based on Linux 5.4-rc2
Boot log failed are shown below.
[0] https://pastebin.com/cEtWq2iX
[ 1.569240] meson-gx-mmc ffe05000.sd: Got CD GPIO
[ 1.599227] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
[ 1.600605] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
[ 1.607166] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
[ 1.613273] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
[ 1.619931] hctosys: unable to open rtc device (rtc0)
My guess their is not much issue with eMMC module, if their is
other approach to resolve this issue, I will give this a try.
Best Regards
-Anand
Anand Moon (5):
arm64: dts: meson: Add missing 5V_EN gpio signal for VCC5V regulator
arm64: dts: meson: Add missing pwm control gpio signal for
pwm-regulator
arm64: dts: meson: Add missing regulator linked to VDDAO_3V3 regulator
to FLASH_VDD
arm64: dts: meson: Add missing regulator linked to VCCV5 regulator to
VDDIO_C/TF_IO
arm64/ARM: configs: Change CONFIG_PWM_MESON from m to y
.../arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 13 +++++++++++++
arch/arm64/configs/defconfig | 2 +-
2 files changed, 14 insertions(+), 1 deletion(-)
--
2.23.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Subject: [RFCv1 0/5] Odroid N2 failes to boot using upstream kernel & u-boot
Date: Mon, 7 Oct 2019 13:16:44 +0000 [thread overview]
Message-ID: <20191007131649.1768-1-linux.amoon@gmail.com> (raw)
We am trying to build the upstream u-boot and upstream kernel,
but it fails to pass the initialization of PWM_MESON driver.
So these patches help boot the kernel on microSD card.
Patchs based on Linux 5.4-rc2
Boot log failed are shown below.
[0] https://pastebin.com/cEtWq2iX
[ 1.569240] meson-gx-mmc ffe05000.sd: Got CD GPIO
[ 1.599227] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
[ 1.600605] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
[ 1.607166] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
[ 1.613273] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
[ 1.619931] hctosys: unable to open rtc device (rtc0)
My guess their is not much issue with eMMC module, if their is
other approach to resolve this issue, I will give this a try.
Best Regards
-Anand
Anand Moon (5):
arm64: dts: meson: Add missing 5V_EN gpio signal for VCC5V regulator
arm64: dts: meson: Add missing pwm control gpio signal for
pwm-regulator
arm64: dts: meson: Add missing regulator linked to VDDAO_3V3 regulator
to FLASH_VDD
arm64: dts: meson: Add missing regulator linked to VCCV5 regulator to
VDDIO_C/TF_IO
arm64/ARM: configs: Change CONFIG_PWM_MESON from m to y
.../arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 13 +++++++++++++
arch/arm64/configs/defconfig | 2 +-
2 files changed, 14 insertions(+), 1 deletion(-)
--
2.23.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2019-10-07 13:17 UTC|newest]
Thread overview: 102+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-07 13:16 Anand Moon [this message]
2019-10-07 13:16 ` [RFCv1 0/5] Odroid N2 failes to boot using upstream kernel & u-boot Anand Moon
2019-10-07 13:16 ` Anand Moon
2019-10-07 13:16 ` [RFCv1 1/5] arm64: dts: meson: Add missing 5V_EN gpio signal for VCC5V regulator Anand Moon
2019-10-07 13:16 ` Anand Moon
2019-10-07 13:16 ` Anand Moon
2019-10-07 14:19 ` Neil Armstrong
2019-10-07 14:19 ` Neil Armstrong
2019-10-07 14:19 ` Neil Armstrong
2019-10-07 15:28 ` Anand Moon
2019-10-07 15:28 ` Anand Moon
2019-10-07 15:28 ` Anand Moon
2019-10-07 13:16 ` [RFCv1 2/5] arm64: dts: meson: Add missing pwm control gpio signal for pwm-regulator Anand Moon
2019-10-07 13:16 ` Anand Moon
2019-10-07 13:16 ` Anand Moon
2019-10-07 14:20 ` Neil Armstrong
2019-10-07 14:20 ` Neil Armstrong
2019-10-07 14:20 ` Neil Armstrong
2019-10-07 14:20 ` Neil Armstrong
2019-10-07 15:30 ` Anand Moon
2019-10-07 15:30 ` Anand Moon
2019-10-07 15:30 ` Anand Moon
2019-10-07 13:16 ` [RFCv1 3/5] arm64: dts: meson: Add missing regulator linked to VDDAO_3V3 regulator to FLASH_VDD Anand Moon
2019-10-07 13:16 ` Anand Moon
2019-10-07 13:16 ` Anand Moon
2019-10-07 14:20 ` Neil Armstrong
2019-10-07 14:20 ` Neil Armstrong
2019-10-07 14:20 ` Neil Armstrong
2019-10-07 15:53 ` Anand Moon
2019-10-07 15:53 ` Anand Moon
2019-10-07 15:53 ` Anand Moon
2019-10-07 15:53 ` Anand Moon
2019-10-07 13:16 ` [RFCv1 4/5] arm64: dts: meson: Add missing regulator linked to VCCV5 regulator to VDDIO_C/TF_IO Anand Moon
2019-10-07 13:16 ` Anand Moon
2019-10-07 13:16 ` Anand Moon
2019-10-07 14:21 ` Neil Armstrong
2019-10-07 14:21 ` Neil Armstrong
2019-10-07 14:21 ` Neil Armstrong
2019-10-07 15:54 ` Anand Moon
2019-10-07 15:54 ` Anand Moon
2019-10-07 15:54 ` Anand Moon
2019-10-07 13:16 ` [RFCv1 5/5] arm64/ARM: configs: Change CONFIG_PWM_MESON from m to y Anand Moon
2019-10-07 13:16 ` Anand Moon
2019-10-07 13:16 ` Anand Moon
2019-10-07 14:25 ` Neil Armstrong
2019-10-07 14:25 ` Neil Armstrong
2019-10-07 14:25 ` Neil Armstrong
2019-10-07 15:52 ` Anand Moon
2019-10-07 15:52 ` Anand Moon
2019-10-07 15:52 ` Anand Moon
2019-10-07 20:10 ` Martin Blumenstingl
2019-10-07 20:10 ` Martin Blumenstingl
2019-10-07 20:10 ` Martin Blumenstingl
2019-10-07 22:57 ` Kevin Hilman
2019-10-07 22:57 ` Kevin Hilman
2019-10-07 22:57 ` Kevin Hilman
2019-10-08 14:38 ` Anand Moon
2019-10-08 14:38 ` Anand Moon
2019-10-08 14:38 ` Anand Moon
2019-10-08 17:40 ` Martin Blumenstingl
2019-10-08 17:40 ` Martin Blumenstingl
2019-10-08 17:40 ` Martin Blumenstingl
2019-10-08 17:40 ` Martin Blumenstingl
2019-10-09 8:48 ` Anand Moon
2019-10-09 8:48 ` Anand Moon
2019-10-09 8:48 ` Anand Moon
2019-10-09 12:04 ` Jerome Brunet
2019-10-09 12:04 ` Jerome Brunet
2019-10-09 12:04 ` Jerome Brunet
2019-10-18 14:04 ` Anand Moon
2019-10-18 14:04 ` Anand Moon
2019-10-18 14:04 ` Anand Moon
2019-10-18 14:13 ` Neil Armstrong
2019-10-18 14:13 ` Neil Armstrong
2019-10-18 14:13 ` Neil Armstrong
2019-10-18 15:21 ` Anand Moon
2019-10-18 15:21 ` Anand Moon
2019-10-18 15:21 ` Anand Moon
2019-10-18 18:10 ` Martin Blumenstingl
2019-10-18 18:10 ` Martin Blumenstingl
2019-10-18 18:10 ` Martin Blumenstingl
2019-10-21 14:11 ` Anand Moon
2019-10-21 14:11 ` Anand Moon
2019-10-21 14:11 ` Anand Moon
2019-10-21 14:25 ` Neil Armstrong
2019-10-21 14:25 ` Neil Armstrong
2019-10-21 14:25 ` Neil Armstrong
2019-10-21 15:41 ` Anand Moon
2019-10-21 15:41 ` Anand Moon
2019-10-21 15:41 ` Anand Moon
2019-10-26 18:56 ` Anand Moon
2019-10-26 18:56 ` Anand Moon
2019-10-26 18:56 ` Anand Moon
2019-10-24 20:20 ` Martin Blumenstingl
2019-10-24 20:20 ` Martin Blumenstingl
2019-10-24 20:20 ` Martin Blumenstingl
2019-10-09 17:05 ` Martin Blumenstingl
2019-10-09 17:05 ` Martin Blumenstingl
2019-10-09 17:05 ` Martin Blumenstingl
2019-10-08 7:19 ` Anand Moon
2019-10-08 7:19 ` Anand Moon
2019-10-08 7:19 ` Anand Moon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191007131649.1768-1-linux.amoon@gmail.com \
--to=linux.amoon@gmail.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.