All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre Torgue <alexandre.torgue@st.com>
To: Maxime Coquelin <mcoquelin.stm32@gmail.com>, <arnd@arndb.de>,
	<robh+dt@kernel.org>, <mark.rutland@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH 3/4] ARM: dts: stm32: remove usb phy-names entries on stm32mp157c-ev1
Date: Mon, 7 Oct 2019 16:34:01 +0200	[thread overview]
Message-ID: <20191007143402.13266-4-alexandre.torgue@st.com> (raw)
In-Reply-To: <20191007143402.13266-1-alexandre.torgue@st.com>

"phy-names" entries are not used. To be compliant with DT validation
tool, those entries have to be remove.

Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 6287db532e7d..2baae5f25e2c 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -343,14 +343,12 @@
 
 &usbh_ehci {
 	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
 &usbotg_hs {
 	dr_mode = "peripheral";
 	phys = <&usbphyc_port1 0>;
-	phy-names = "usb2-phy";
 	status = "okay";
 };
 
-- 
2.17.1


WARNING: multiple messages have this Message-ID
From: Alexandre Torgue <alexandre.torgue@st.com>
To: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	arnd@arndb.de, robh+dt@kernel.org, mark.rutland@arm.com
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	Alexandre Torgue <alexandre.torgue@st.com>,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-kernel@vger.kernel.org
Subject: [PATCH 3/4] ARM: dts: stm32: remove usb phy-names entries on stm32mp157c-ev1
Date: Mon, 7 Oct 2019 16:34:01 +0200	[thread overview]
Message-ID: <20191007143402.13266-4-alexandre.torgue@st.com> (raw)
In-Reply-To: <20191007143402.13266-1-alexandre.torgue@st.com>

"phy-names" entries are not used. To be compliant with DT validation
tool, those entries have to be remove.

Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 6287db532e7d..2baae5f25e2c 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -343,14 +343,12 @@
 
 &usbh_ehci {
 	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
 &usbotg_hs {
 	dr_mode = "peripheral";
 	phys = <&usbphyc_port1 0>;
-	phy-names = "usb2-phy";
 	status = "okay";
 };
 
-- 
2.17.1

WARNING: multiple messages have this Message-ID
From: Alexandre Torgue <alexandre.torgue@st.com>
To: Maxime Coquelin <mcoquelin.stm32@gmail.com>, <arnd@arndb.de>,
	<robh+dt@kernel.org>, <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Alexandre Torgue <alexandre.torgue@st.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com
Subject: [PATCH 3/4] ARM: dts: stm32: remove usb phy-names entries on stm32mp157c-ev1
Date: Mon, 7 Oct 2019 16:34:01 +0200	[thread overview]
Message-ID: <20191007143402.13266-4-alexandre.torgue@st.com> (raw)
In-Reply-To: <20191007143402.13266-1-alexandre.torgue@st.com>

"phy-names" entries are not used. To be compliant with DT validation
tool, those entries have to be remove.

Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 6287db532e7d..2baae5f25e2c 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -343,14 +343,12 @@
 
 &usbh_ehci {
 	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
 &usbotg_hs {
 	dr_mode = "peripheral";
 	phys = <&usbphyc_port1 0>;
-	phy-names = "usb2-phy";
 	status = "okay";
 };
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-10-07 14:34 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-07 14:33 [PATCH 0/4] ARM: dts: stm32: Add fixes to be compliant with DT validation tool Alexandre Torgue
2019-10-07 14:33 ` Alexandre Torgue
2019-10-07 14:33 ` Alexandre Torgue
2019-10-07 14:33 ` [PATCH 1/4] ARM: dts: stm32: fix memory nodes to match " Alexandre Torgue
2019-10-07 14:33   ` Alexandre Torgue
2019-10-07 14:33   ` Alexandre Torgue
2019-10-07 14:34 ` [PATCH 2/4] ARM: dts: stm32: fix joystick node on stm32f746 and stm32mp157c eval boards Alexandre Torgue
2019-10-07 14:34   ` Alexandre Torgue
2019-10-07 14:34   ` Alexandre Torgue
2019-10-07 14:34 ` Alexandre Torgue [this message]
2019-10-07 14:34   ` [PATCH 3/4] ARM: dts: stm32: remove usb phy-names entries on stm32mp157c-ev1 Alexandre Torgue
2019-10-07 14:34   ` Alexandre Torgue
2019-10-07 14:34 ` [PATCH 4/4] ARM: dts: stm32: fix regulator-sd_switch node on stm32mp157c-ed1 board Alexandre Torgue
2019-10-07 14:34   ` Alexandre Torgue
2019-10-07 14:34   ` Alexandre Torgue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191007143402.13266-4-alexandre.torgue@st.com \
    --to=alexandre.torgue@st.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mark.rutland@arm.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.