[dpdk-dev] [PATCH v6 2/5] mbuf: delinline rte_pktmbuf_linearize

[Stephen Hemminger <stephen@networkplumber.org>]

This copy part of this function is too big to be put inline.
The places it is used are only in special exception paths
where a highly fragmented mbuf arrives at a device that can't handle it.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
---
 lib/librte_mbuf/rte_mbuf.c           | 37 +++++++++++++++++++++++++++
 lib/librte_mbuf/rte_mbuf.h           | 38 +++++-----------------------
 lib/librte_mbuf/rte_mbuf_version.map |  6 +++++
 3 files changed, 49 insertions(+), 32 deletions(-)

diff --git a/lib/librte_mbuf/rte_mbuf.c b/lib/librte_mbuf/rte_mbuf.c
index 37718d49c148..e2c661c97522 100644
--- a/lib/librte_mbuf/rte_mbuf.c
+++ b/lib/librte_mbuf/rte_mbuf.c
@@ -245,6 +245,43 @@ int rte_mbuf_check(const struct rte_mbuf *m, int is_header,
 	return 0;
 }
 
+/* convert multi-segment mbuf to single mbuf */
+int
+__rte_pktmbuf_linearize(struct rte_mbuf *mbuf)
+{
+	size_t seg_len, copy_len;
+	struct rte_mbuf *m;
+	struct rte_mbuf *m_next;
+	char *buffer;
+
+	/* Extend first segment to the total packet length */
+	copy_len = rte_pktmbuf_pkt_len(mbuf) - rte_pktmbuf_data_len(mbuf);
+
+	if (unlikely(copy_len > rte_pktmbuf_tailroom(mbuf)))
+		return -1;
+
+	buffer = rte_pktmbuf_mtod_offset(mbuf, char *, mbuf->data_len);
+	mbuf->data_len = (uint16_t)(mbuf->pkt_len);
+
+	/* Append data from next segments to the first one */
+	m = mbuf->next;
+	while (m != NULL) {
+		m_next = m->next;
+
+		seg_len = rte_pktmbuf_data_len(m);
+		rte_memcpy(buffer, rte_pktmbuf_mtod(m, char *), seg_len);
+		buffer += seg_len;
+
+		rte_pktmbuf_free_seg(m);
+		m = m_next;
+	}
+
+	mbuf->next = NULL;
+	mbuf->nb_segs = 1;
+
+	return 0;
+}
+
 /* dump a mbuf on console */
 void
 rte_pktmbuf_dump(FILE *f, const struct rte_mbuf *m, unsigned dump_len)
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index 98225ec80bf1..bffda1c81fbd 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -2400,6 +2400,11 @@ rte_validate_tx_offload(const struct rte_mbuf *m)
 	return 0;
 }
 
+/**
+ * @internal used by rte_pktmbuf_linearize().
+ */
+int __rte_pktmbuf_linearize(struct rte_mbuf *mbuf);
+
 /**
  * Linearize data in mbuf.
  *
@@ -2415,40 +2420,9 @@ rte_validate_tx_offload(const struct rte_mbuf *m)
 static inline int
 rte_pktmbuf_linearize(struct rte_mbuf *mbuf)
 {
-	size_t seg_len, copy_len;
-	struct rte_mbuf *m;
-	struct rte_mbuf *m_next;
-	char *buffer;
-
 	if (rte_pktmbuf_is_contiguous(mbuf))
 		return 0;
-
-	/* Extend first segment to the total packet length */
-	copy_len = rte_pktmbuf_pkt_len(mbuf) - rte_pktmbuf_data_len(mbuf);
-
-	if (unlikely(copy_len > rte_pktmbuf_tailroom(mbuf)))
-		return -1;
-
-	buffer = rte_pktmbuf_mtod_offset(mbuf, char *, mbuf->data_len);
-	mbuf->data_len = (uint16_t)(mbuf->pkt_len);
-
-	/* Append data from next segments to the first one */
-	m = mbuf->next;
-	while (m != NULL) {
-		m_next = m->next;
-
-		seg_len = rte_pktmbuf_data_len(m);
-		rte_memcpy(buffer, rte_pktmbuf_mtod(m, char *), seg_len);
-		buffer += seg_len;
-
-		rte_pktmbuf_free_seg(m);
-		m = m_next;
-	}
-
-	mbuf->next = NULL;
-	mbuf->nb_segs = 1;
-
-	return 0;
+	return __rte_pktmbuf_linearize(mbuf);
 }
 
 /**
diff --git a/lib/librte_mbuf/rte_mbuf_version.map b/lib/librte_mbuf/rte_mbuf_version.map
index 2662a37bf674..4d0bc9772769 100644
--- a/lib/librte_mbuf/rte_mbuf_version.map
+++ b/lib/librte_mbuf/rte_mbuf_version.map
@@ -46,6 +46,12 @@ DPDK_18.08 {
 	rte_pktmbuf_pool_create_by_ops;
 } DPDK_16.11;
 
+DPDK_19.11 {
+	global:
+
+	__rte_pktmbuf_linearize;
+} DPDK_18.08;
+
 EXPERIMENTAL {
 	global:
 
-- 
2.20.1