On Fri, 11 Oct 2019 17:22:14 +0200
Marco Felsch <m.felsch@pengutronix.de> wrote:

> On 19-10-11 17:05, Andreas Kemnade wrote:
> > On Fri, 11 Oct 2019 09:29:27 -0500
> > Rob Herring <robh@kernel.org> wrote:
> >   
> > > On Fri, Oct 11, 2019 at 09:41:48AM +0200, Andreas Kemnade wrote:  
> > > > On Fri, 11 Oct 2019 08:56:09 +0200
> > > > Marco Felsch <m.felsch@pengutronix.de> wrote:
> > > >     
> > > > > Hi Andreas,
> > > > > 
> > > > > On 19-10-10 21:23, Andreas Kemnade wrote:    
> > > > > > The Netronix board E60K02 can be found some several Ebook-Readers,
> > > > > > at least the Kobo Clara HD and the Tolino Shine 3. The board
> > > > > > is equipped with different SoCs requiring different pinmuxes.
> > > > > > 
> > > > > > For now the following peripherals are included:
> > > > > > - LED
> > > > > > - Power Key
> > > > > > - Cover (gpio via hall sensor)
> > > > > > - RC5T619 PMIC (the kernel misses support for rtc and charger
> > > > > >   subdevices).
> > > > > > - Backlight via lm3630a
> > > > > > - Wifi sdio chip detection (mmc-powerseq and stuff)
> > > > > > 
> > > > > > It is based on vendor kernel but heavily reworked due to many
> > > > > > changed bindings.
> > > > > > 
> > > > > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> > > > > > ---
> > > > > > Changes in v3:
> > > > > > - better led name
> > > > > > - correct memory size
> > > > > > - comments about missing devices
> > > > > > 
> > > > > > Changes in v2:
> > > > > > - reordered, was 1/3
> > > > > > - moved pinmuxes to their actual users, not the parents
> > > > > >   of them
> > > > > > - removed some already-disabled stuff
> > > > > > - minor cleanups      
> > > > > 
> > > > > You won't change the muxing, so a this dtsi can be self contained?
> > > > >     
> > > > So you want me to put a big 
> > > > #if defined(MX6SLL)     
> > > 
> > > Not sure what the comment meant, but no, don't do this. C defines in dts 
> > > files are for symbolic names for numbers and assembling bitfields and 
> > > that's it.  
> > 
> > yes, that is also my opinion. For now, there is only one user
> > of this .dtsi, but I have another one in preparation. That is the
> > reason for splitting things between .dts and .dtsi to avoid such ugly
> > ifdefs  
> 
> Then IMHO the pnictrl-* entries shouldn't appear in the dsti.
> 
hmm, maybe now I understand your idea:
You do not want only to have

  pinctrl_lm3630a_bl_gpio: lm3630a_bl_gpio_grp {
                        fsl,pins = <
                                MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10   0x10059 /* HWEN */
                        >;
                };
in dts, but also  do not have these in .dtsi:

                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;

and instead have in dts:
&lm3630a {
 	pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
	
};


just to make sure I get it right before doing the restructuring work. That way of structuring things did not come to my mind, but then the .dtsi is self-contained.

Regards,
Andreas