All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, peter.maydell@linaro.org, qemu-devel@nongnu.org
Subject: [PULL 01/15] block/vhdx: add check for truncated image files
Date: Mon, 14 Oct 2019 18:03:35 +0200	[thread overview]
Message-ID: <20191014160343.8211-2-kwolf@redhat.com> (raw)
In-Reply-To: <20191014160343.8211-1-kwolf@redhat.com>

From: Peter Lieven <pl@kamp.de>

qemu is currently not able to detect truncated vhdx image files.
Add a basic check if all allocated blocks are reachable at open and
report all errors during bdrv_co_check.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block/vhdx.c | 120 +++++++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 103 insertions(+), 17 deletions(-)

diff --git a/block/vhdx.c b/block/vhdx.c
index 6a09d0a55c..371f226286 100644
--- a/block/vhdx.c
+++ b/block/vhdx.c
@@ -24,6 +24,7 @@
 #include "qemu/option.h"
 #include "qemu/crc32c.h"
 #include "qemu/bswap.h"
+#include "qemu/error-report.h"
 #include "vhdx.h"
 #include "migration/blocker.h"
 #include "qemu/uuid.h"
@@ -235,6 +236,9 @@ static int vhdx_region_check(BDRVVHDXState *s, uint64_t start, uint64_t length)
     end = start + length;
     QLIST_FOREACH(r, &s->regions, entries) {
         if (!((start >= r->end) || (end <= r->start))) {
+            error_report("VHDX region %" PRIu64 "-%" PRIu64 " overlaps with "
+                         "region %" PRIu64 "-%." PRIu64, start, end, r->start,
+                         r->end);
             ret = -EINVAL;
             goto exit;
         }
@@ -877,6 +881,95 @@ static void vhdx_calc_bat_entries(BDRVVHDXState *s)
 
 }
 
+static int vhdx_check_bat_entries(BlockDriverState *bs, int *errcnt)
+{
+    BDRVVHDXState *s = bs->opaque;
+    int64_t image_file_size = bdrv_getlength(bs->file->bs);
+    uint64_t payblocks = s->chunk_ratio;
+    uint64_t i;
+    int ret = 0;
+
+    if (image_file_size < 0) {
+        error_report("Could not determinate VHDX image file size.");
+        return image_file_size;
+    }
+
+    for (i = 0; i < s->bat_entries; i++) {
+        if ((s->bat[i] & VHDX_BAT_STATE_BIT_MASK) ==
+            PAYLOAD_BLOCK_FULLY_PRESENT) {
+            uint64_t offset = s->bat[i] & VHDX_BAT_FILE_OFF_MASK;
+            /*
+             * Allow that the last block exists only partially. The VHDX spec
+             * states that the image file can only grow in blocksize increments,
+             * but QEMU created images with partial last blocks in the past.
+             */
+            uint32_t block_length = MIN(s->block_size,
+                bs->total_sectors * BDRV_SECTOR_SIZE - i * s->block_size);
+            /*
+             * Check for BAT entry overflow.
+             */
+            if (offset > INT64_MAX - s->block_size) {
+                error_report("VHDX BAT entry %" PRIu64 " offset overflow.", i);
+                ret = -EINVAL;
+                if (!errcnt) {
+                    break;
+                }
+                (*errcnt)++;
+            }
+            /*
+             * Check if fully allocated BAT entries do not reside after
+             * end of the image file.
+             */
+            if (offset >= image_file_size) {
+                error_report("VHDX BAT entry %" PRIu64 " start offset %" PRIu64
+                             " points after end of file (%" PRIi64 "). Image"
+                             " has probably been truncated.",
+                             i, offset, image_file_size);
+                ret = -EINVAL;
+                if (!errcnt) {
+                    break;
+                }
+                (*errcnt)++;
+            } else if (offset + block_length > image_file_size) {
+                error_report("VHDX BAT entry %" PRIu64 " end offset %" PRIu64
+                             " points after end of file (%" PRIi64 "). Image"
+                             " has probably been truncated.",
+                             i, offset + block_length - 1, image_file_size);
+                ret = -EINVAL;
+                if (!errcnt) {
+                    break;
+                }
+                (*errcnt)++;
+            }
+
+            /*
+             * verify populated BAT field file offsets against
+             * region table and log entries
+             */
+            if (payblocks--) {
+                /* payload bat entries */
+                int ret2;
+                ret2 = vhdx_region_check(s, offset, s->block_size);
+                if (ret2 < 0) {
+                    ret = -EINVAL;
+                    if (!errcnt) {
+                        break;
+                    }
+                    (*errcnt)++;
+                }
+            } else {
+                payblocks = s->chunk_ratio;
+                /*
+                 * Once differencing files are supported, verify sector bitmap
+                 * blocks here
+                 */
+            }
+        }
+    }
+
+    return ret;
+}
+
 static void vhdx_close(BlockDriverState *bs)
 {
     BDRVVHDXState *s = bs->opaque;
@@ -981,25 +1074,15 @@ static int vhdx_open(BlockDriverState *bs, QDict *options, int flags,
         goto fail;
     }
 
-    uint64_t payblocks = s->chunk_ratio;
-    /* endian convert, and verify populated BAT field file offsets against
-     * region table and log entries */
+    /* endian convert populated BAT field entires */
     for (i = 0; i < s->bat_entries; i++) {
         s->bat[i] = le64_to_cpu(s->bat[i]);
-        if (payblocks--) {
-            /* payload bat entries */
-            if ((s->bat[i] & VHDX_BAT_STATE_BIT_MASK) ==
-                    PAYLOAD_BLOCK_FULLY_PRESENT) {
-                ret = vhdx_region_check(s, s->bat[i] & VHDX_BAT_FILE_OFF_MASK,
-                                        s->block_size);
-                if (ret < 0) {
-                    goto fail;
-                }
-            }
-        } else {
-            payblocks = s->chunk_ratio;
-            /* Once differencing files are supported, verify sector bitmap
-             * blocks here */
+    }
+
+    if (!(flags & BDRV_O_CHECK)) {
+        ret = vhdx_check_bat_entries(bs, NULL);
+        if (ret < 0) {
+            goto fail;
         }
     }
 
@@ -2072,6 +2155,9 @@ static int coroutine_fn vhdx_co_check(BlockDriverState *bs,
     if (s->log_replayed_on_open) {
         result->corruptions_fixed++;
     }
+
+    vhdx_check_bat_entries(bs, &result->corruptions);
+
     return 0;
 }
 
-- 
2.20.1



  reply	other threads:[~2019-10-14 16:12 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-14 16:03 [PULL 00/15] Block layer patches Kevin Wolf
2019-10-14 16:03 ` Kevin Wolf [this message]
2019-10-14 16:03 ` [PULL 02/15] block: implement bdrv_snapshot_goto for blkreplay Kevin Wolf
2019-10-14 16:03 ` [PULL 03/15] replay: disable default snapshot for record/replay Kevin Wolf
2019-10-14 16:03 ` [PULL 04/15] replay: update docs for record/replay with block devices Kevin Wolf
2019-10-14 16:03 ` [PULL 05/15] replay: don't drain/flush bdrv queue while RR is working Kevin Wolf
2019-10-14 16:03 ` [PULL 06/15] replay: finish record/replay before closing the disks Kevin Wolf
2019-10-14 16:03 ` [PULL 07/15] replay: add BH oneshot event for block layer Kevin Wolf
2019-10-14 16:03 ` [PULL 08/15] block: Reject misaligned write requests with BDRV_REQ_NO_FALLBACK Kevin Wolf
2019-10-14 16:03 ` [PULL 09/15] iotests/028: Fix for long $TEST_DIRs Kevin Wolf
2019-10-15 16:09 ` [PULL 00/15] Block layer patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191014160343.8211-2-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.