* [PATCH V2 0/2] target/i386/kvm: Add Hyper-V direct tlb flush support
@ 2019-10-15 14:36 ` lantianyu1986
0 siblings, 0 replies; 6+ messages in thread
From: lantianyu1986 @ 2019-10-15 14:36 UTC (permalink / raw)
To: mst, cohuck, pbonzini, rth, ehabkost, mtosatti, rkagan
Cc: Tianyu Lan, kvm, qemu-devel
From: Tianyu Lan <Tianyu.Lan@microsoft.com>
This patchset is to enable Hyper-V direct tlbflush
feature. The feature is to let L0 hypervisor to handle
tlb flush hypercall for L1 hypervisor.
Tianyu Lan (2):
linux headers: update against Linux 5.4-rc2
target/i386/kvm: Add Hyper-V direct tlb flush support
docs/hyperv.txt | 12 +++++
include/standard-headers/asm-x86/bootparam.h | 2 +
include/standard-headers/asm-x86/kvm_para.h | 1 +
include/standard-headers/linux/ethtool.h | 24 ++++++++++
include/standard-headers/linux/pci_regs.h | 19 +++++++-
include/standard-headers/linux/virtio_ids.h | 2 +
include/standard-headers/linux/virtio_pmem.h | 6 +--
linux-headers/asm-arm/kvm.h | 16 ++++++-
linux-headers/asm-arm/unistd-common.h | 2 +
linux-headers/asm-arm64/kvm.h | 21 +++++++-
linux-headers/asm-generic/mman-common.h | 18 ++++---
linux-headers/asm-generic/mman.h | 10 ++--
linux-headers/asm-generic/unistd.h | 10 +++-
linux-headers/asm-mips/mman.h | 3 ++
linux-headers/asm-mips/unistd_n32.h | 2 +
linux-headers/asm-mips/unistd_n64.h | 2 +
linux-headers/asm-mips/unistd_o32.h | 2 +
linux-headers/asm-powerpc/mman.h | 6 +--
linux-headers/asm-powerpc/unistd_32.h | 2 +
linux-headers/asm-powerpc/unistd_64.h | 2 +
linux-headers/asm-s390/kvm.h | 6 +++
linux-headers/asm-s390/unistd_32.h | 2 +
linux-headers/asm-s390/unistd_64.h | 2 +
linux-headers/asm-x86/kvm.h | 28 ++++++++---
linux-headers/asm-x86/unistd.h | 2 +-
linux-headers/asm-x86/unistd_32.h | 2 +
linux-headers/asm-x86/unistd_64.h | 2 +
linux-headers/asm-x86/unistd_x32.h | 2 +
linux-headers/linux/kvm.h | 12 ++++-
linux-headers/linux/psp-sev.h | 5 +-
linux-headers/linux/vfio.h | 71 ++++++++++++++++++++--------
target/i386/cpu.c | 2 +
target/i386/cpu.h | 1 +
target/i386/kvm.c | 23 +++++++++
34 files changed, 263 insertions(+), 59 deletions(-)
--
2.14.5
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH V2 0/2] target/i386/kvm: Add Hyper-V direct tlb flush support
@ 2019-10-15 14:36 ` lantianyu1986
0 siblings, 0 replies; 6+ messages in thread
From: lantianyu1986 @ 2019-10-15 14:36 UTC (permalink / raw)
To: mst, cohuck, pbonzini, rth, ehabkost, mtosatti, rkagan
Cc: Tianyu Lan, qemu-devel, kvm
From: Tianyu Lan <Tianyu.Lan@microsoft.com>
This patchset is to enable Hyper-V direct tlbflush
feature. The feature is to let L0 hypervisor to handle
tlb flush hypercall for L1 hypervisor.
Tianyu Lan (2):
linux headers: update against Linux 5.4-rc2
target/i386/kvm: Add Hyper-V direct tlb flush support
docs/hyperv.txt | 12 +++++
include/standard-headers/asm-x86/bootparam.h | 2 +
include/standard-headers/asm-x86/kvm_para.h | 1 +
include/standard-headers/linux/ethtool.h | 24 ++++++++++
include/standard-headers/linux/pci_regs.h | 19 +++++++-
include/standard-headers/linux/virtio_ids.h | 2 +
include/standard-headers/linux/virtio_pmem.h | 6 +--
linux-headers/asm-arm/kvm.h | 16 ++++++-
linux-headers/asm-arm/unistd-common.h | 2 +
linux-headers/asm-arm64/kvm.h | 21 +++++++-
linux-headers/asm-generic/mman-common.h | 18 ++++---
linux-headers/asm-generic/mman.h | 10 ++--
linux-headers/asm-generic/unistd.h | 10 +++-
linux-headers/asm-mips/mman.h | 3 ++
linux-headers/asm-mips/unistd_n32.h | 2 +
linux-headers/asm-mips/unistd_n64.h | 2 +
linux-headers/asm-mips/unistd_o32.h | 2 +
linux-headers/asm-powerpc/mman.h | 6 +--
linux-headers/asm-powerpc/unistd_32.h | 2 +
linux-headers/asm-powerpc/unistd_64.h | 2 +
linux-headers/asm-s390/kvm.h | 6 +++
linux-headers/asm-s390/unistd_32.h | 2 +
linux-headers/asm-s390/unistd_64.h | 2 +
linux-headers/asm-x86/kvm.h | 28 ++++++++---
linux-headers/asm-x86/unistd.h | 2 +-
linux-headers/asm-x86/unistd_32.h | 2 +
linux-headers/asm-x86/unistd_64.h | 2 +
linux-headers/asm-x86/unistd_x32.h | 2 +
linux-headers/linux/kvm.h | 12 ++++-
linux-headers/linux/psp-sev.h | 5 +-
linux-headers/linux/vfio.h | 71 ++++++++++++++++++++--------
target/i386/cpu.c | 2 +
target/i386/cpu.h | 1 +
target/i386/kvm.c | 23 +++++++++
34 files changed, 263 insertions(+), 59 deletions(-)
--
2.14.5
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH V2 1/2] linux headers: update against Linux 5.4-rc2
2019-10-15 14:36 ` lantianyu1986
(?)
@ 2019-10-15 14:36 ` lantianyu1986
-1 siblings, 0 replies; 6+ messages in thread
From: lantianyu1986 @ 2019-10-15 14:36 UTC (permalink / raw)
To: mst, cohuck, pbonzini, rth, ehabkost, mtosatti, vkuznets, rkagan
Cc: Tianyu Lan, qemu-devel, kvm
From: Tianyu Lan <Tianyu.Lan@microsoft.com>
commit da0c9ea146cbe92b832f1b0f694840ea8eb33cce
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
---
include/standard-headers/asm-x86/bootparam.h | 2 +
include/standard-headers/asm-x86/kvm_para.h | 1 +
include/standard-headers/linux/ethtool.h | 24 ++++++++++
include/standard-headers/linux/pci_regs.h | 19 +++++++-
include/standard-headers/linux/virtio_ids.h | 2 +
include/standard-headers/linux/virtio_pmem.h | 6 +--
| 16 ++++++-
| 2 +
| 21 +++++++-
| 18 ++++---
| 10 ++--
| 10 +++-
| 3 ++
| 2 +
| 2 +
| 2 +
| 6 +--
| 2 +
| 2 +
| 6 +++
| 2 +
| 2 +
| 28 ++++++++---
| 2 +-
| 2 +
| 2 +
| 2 +
| 12 ++++-
| 5 +-
| 71 ++++++++++++++++++++--------
30 files changed, 225 insertions(+), 59 deletions(-)
diff --git a/include/standard-headers/asm-x86/bootparam.h b/include/standard-headers/asm-x86/bootparam.h
index 67d4f0119f..a6f7cf535e 100644
--- a/include/standard-headers/asm-x86/bootparam.h
+++ b/include/standard-headers/asm-x86/bootparam.h
@@ -29,6 +29,8 @@
#define XLF_EFI_HANDOVER_32 (1<<2)
#define XLF_EFI_HANDOVER_64 (1<<3)
#define XLF_EFI_KEXEC (1<<4)
+#define XLF_5LEVEL (1<<5)
+#define XLF_5LEVEL_ENABLED (1<<6)
#endif /* _ASM_X86_BOOTPARAM_H */
diff --git a/include/standard-headers/asm-x86/kvm_para.h b/include/standard-headers/asm-x86/kvm_para.h
index e1715143fd..90604a8fb7 100644
--- a/include/standard-headers/asm-x86/kvm_para.h
+++ b/include/standard-headers/asm-x86/kvm_para.h
@@ -30,6 +30,7 @@
#define KVM_FEATURE_ASYNC_PF_VMEXIT 10
#define KVM_FEATURE_PV_SEND_IPI 11
#define KVM_FEATURE_POLL_CONTROL 12
+#define KVM_FEATURE_PV_SCHED_YIELD 13
#define KVM_HINTS_REALTIME 0
diff --git a/include/standard-headers/linux/ethtool.h b/include/standard-headers/linux/ethtool.h
index 9b9919a8f6..4ff422b635 100644
--- a/include/standard-headers/linux/ethtool.h
+++ b/include/standard-headers/linux/ethtool.h
@@ -259,10 +259,32 @@ struct ethtool_tunable {
#define ETHTOOL_PHY_FAST_LINK_DOWN_ON 0
#define ETHTOOL_PHY_FAST_LINK_DOWN_OFF 0xff
+/* Energy Detect Power Down (EDPD) is a feature supported by some PHYs, where
+ * the PHY's RX & TX blocks are put into a low-power mode when there is no
+ * link detected (typically cable is un-plugged). For RX, only a minimal
+ * link-detection is available, and for TX the PHY wakes up to send link pulses
+ * to avoid any lock-ups in case the peer PHY may also be running in EDPD mode.
+ *
+ * Some PHYs may support configuration of the wake-up interval for TX pulses,
+ * and some PHYs may support only disabling TX pulses entirely. For the latter
+ * a special value is required (ETHTOOL_PHY_EDPD_NO_TX) so that this can be
+ * configured from userspace (should the user want it).
+ *
+ * The interval units for TX wake-up are in milliseconds, since this should
+ * cover a reasonable range of intervals:
+ * - from 1 millisecond, which does not sound like much of a power-saver
+ * - to ~65 seconds which is quite a lot to wait for a link to come up when
+ * plugging a cable
+ */
+#define ETHTOOL_PHY_EDPD_DFLT_TX_MSECS 0xffff
+#define ETHTOOL_PHY_EDPD_NO_TX 0xfffe
+#define ETHTOOL_PHY_EDPD_DISABLE 0
+
enum phy_tunable_id {
ETHTOOL_PHY_ID_UNSPEC,
ETHTOOL_PHY_DOWNSHIFT,
ETHTOOL_PHY_FAST_LINK_DOWN,
+ ETHTOOL_PHY_EDPD,
/*
* Add your fresh new phy tunable attribute above and remember to update
* phy_tunable_strings[] in net/core/ethtool.c
@@ -1483,6 +1505,8 @@ enum ethtool_link_mode_bit_indices {
ETHTOOL_LINK_MODE_200000baseLR4_ER4_FR4_Full_BIT = 64,
ETHTOOL_LINK_MODE_200000baseDR4_Full_BIT = 65,
ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT = 66,
+ ETHTOOL_LINK_MODE_100baseT1_Full_BIT = 67,
+ ETHTOOL_LINK_MODE_1000baseT1_Full_BIT = 68,
/* must be last entry */
__ETHTOOL_LINK_MODE_MASK_NBITS
diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h
index 27164769d1..29d6e93fd1 100644
--- a/include/standard-headers/linux/pci_regs.h
+++ b/include/standard-headers/linux/pci_regs.h
@@ -528,6 +528,7 @@
#define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */
#define PCI_EXP_LNKCAP_SLS_8_0GB 0x00000003 /* LNKCAP2 SLS Vector bit 2 */
#define PCI_EXP_LNKCAP_SLS_16_0GB 0x00000004 /* LNKCAP2 SLS Vector bit 3 */
+#define PCI_EXP_LNKCAP_SLS_32_0GB 0x00000005 /* LNKCAP2 SLS Vector bit 4 */
#define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */
#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */
#define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */
@@ -556,6 +557,7 @@
#define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */
#define PCI_EXP_LNKSTA_CLS_8_0GB 0x0003 /* Current Link Speed 8.0GT/s */
#define PCI_EXP_LNKSTA_CLS_16_0GB 0x0004 /* Current Link Speed 16.0GT/s */
+#define PCI_EXP_LNKSTA_CLS_32_0GB 0x0005 /* Current Link Speed 32.0GT/s */
#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Negotiated Link Width */
#define PCI_EXP_LNKSTA_NLW_X1 0x0010 /* Current Link Width x1 */
#define PCI_EXP_LNKSTA_NLW_X2 0x0020 /* Current Link Width x2 */
@@ -589,6 +591,7 @@
#define PCI_EXP_SLTCTL_CCIE 0x0010 /* Command Completed Interrupt Enable */
#define PCI_EXP_SLTCTL_HPIE 0x0020 /* Hot-Plug Interrupt Enable */
#define PCI_EXP_SLTCTL_AIC 0x00c0 /* Attention Indicator Control */
+#define PCI_EXP_SLTCTL_ATTN_IND_SHIFT 6 /* Attention Indicator shift */
#define PCI_EXP_SLTCTL_ATTN_IND_ON 0x0040 /* Attention Indicator on */
#define PCI_EXP_SLTCTL_ATTN_IND_BLINK 0x0080 /* Attention Indicator blinking */
#define PCI_EXP_SLTCTL_ATTN_IND_OFF 0x00c0 /* Attention Indicator off */
@@ -661,6 +664,7 @@
#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5GT/s */
#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8GT/s */
#define PCI_EXP_LNKCAP2_SLS_16_0GB 0x00000010 /* Supported Speed 16GT/s */
+#define PCI_EXP_LNKCAP2_SLS_32_0GB 0x00000020 /* Supported Speed 32GT/s */
#define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */
#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */
#define PCI_EXP_LNKCTL2_TLS 0x000f
@@ -668,6 +672,7 @@
#define PCI_EXP_LNKCTL2_TLS_5_0GT 0x0002 /* Supported Speed 5GT/s */
#define PCI_EXP_LNKCTL2_TLS_8_0GT 0x0003 /* Supported Speed 8GT/s */
#define PCI_EXP_LNKCTL2_TLS_16_0GT 0x0004 /* Supported Speed 16GT/s */
+#define PCI_EXP_LNKCTL2_TLS_32_0GT 0x0005 /* Supported Speed 32GT/s */
#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */
#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */
#define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */
@@ -709,7 +714,9 @@
#define PCI_EXT_CAP_ID_DPC 0x1D /* Downstream Port Containment */
#define PCI_EXT_CAP_ID_L1SS 0x1E /* L1 PM Substates */
#define PCI_EXT_CAP_ID_PTM 0x1F /* Precision Time Measurement */
-#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PTM
+#define PCI_EXT_CAP_ID_DLF 0x25 /* Data Link Feature */
+#define PCI_EXT_CAP_ID_PL_16GT 0x26 /* Physical Layer 16.0 GT/s */
+#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PL_16GT
#define PCI_EXT_CAP_DSN_SIZEOF 12
#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40
@@ -1049,4 +1056,14 @@
#define PCI_L1SS_CTL1_LTR_L12_TH_SCALE 0xe0000000 /* LTR_L1.2_THRESHOLD_Scale */
#define PCI_L1SS_CTL2 0x0c /* Control 2 Register */
+/* Data Link Feature */
+#define PCI_DLF_CAP 0x04 /* Capabilities Register */
+#define PCI_DLF_EXCHANGE_ENABLE 0x80000000 /* Data Link Feature Exchange Enable */
+
+/* Physical Layer 16.0 GT/s */
+#define PCI_PL_16GT_LE_CTRL 0x20 /* Lane Equalization Control Register */
+#define PCI_PL_16GT_LE_CTRL_DSP_TX_PRESET_MASK 0x0000000F
+#define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_MASK 0x000000F0
+#define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_SHIFT 4
+
#endif /* LINUX_PCI_REGS_H */
diff --git a/include/standard-headers/linux/virtio_ids.h b/include/standard-headers/linux/virtio_ids.h
index 32b2f94d1f..585e07b273 100644
--- a/include/standard-headers/linux/virtio_ids.h
+++ b/include/standard-headers/linux/virtio_ids.h
@@ -43,6 +43,8 @@
#define VIRTIO_ID_INPUT 18 /* virtio input */
#define VIRTIO_ID_VSOCK 19 /* virtio vsock transport */
#define VIRTIO_ID_CRYPTO 20 /* virtio crypto */
+#define VIRTIO_ID_IOMMU 23 /* virtio IOMMU */
+#define VIRTIO_ID_FS 26 /* virtio filesystem */
#define VIRTIO_ID_PMEM 27 /* virtio pmem */
#endif /* _LINUX_VIRTIO_IDS_H */
diff --git a/include/standard-headers/linux/virtio_pmem.h b/include/standard-headers/linux/virtio_pmem.h
index 7e3d43b121..fc029de798 100644
--- a/include/standard-headers/linux/virtio_pmem.h
+++ b/include/standard-headers/linux/virtio_pmem.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause */
/*
* Definitions for virtio-pmem devices.
*
@@ -7,8 +7,8 @@
* Author(s): Pankaj Gupta <pagupta@redhat.com>
*/
-#ifndef _UAPI_LINUX_VIRTIO_PMEM_H
-#define _UAPI_LINUX_VIRTIO_PMEM_H
+#ifndef _LINUX_VIRTIO_PMEM_H
+#define _LINUX_VIRTIO_PMEM_H
#include "standard-headers/linux/types.h"
#include "standard-headers/linux/virtio_ids.h"
--git a/linux-headers/asm-arm/kvm.h b/linux-headers/asm-arm/kvm.h
index e1f8b74558..9d379d3372 100644
--- a/linux-headers/asm-arm/kvm.h
+++ b/linux-headers/asm-arm/kvm.h
@@ -214,6 +214,18 @@ struct kvm_vcpu_events {
#define KVM_REG_ARM_FW_REG(r) (KVM_REG_ARM | KVM_REG_SIZE_U64 | \
KVM_REG_ARM_FW | ((r) & 0xffff))
#define KVM_REG_ARM_PSCI_VERSION KVM_REG_ARM_FW_REG(0)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1 KVM_REG_ARM_FW_REG(1)
+ /* Higher values mean better protection. */
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL 0
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL 1
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED 2
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2 KVM_REG_ARM_FW_REG(2)
+ /* Higher values mean better protection. */
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL 0
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN 1
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL 2
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED 3
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED (1U << 4)
/* Device Control API: ARM VGIC */
#define KVM_DEV_ARM_VGIC_GRP_ADDR 0
@@ -254,8 +266,10 @@ struct kvm_vcpu_events {
#define KVM_DEV_ARM_ITS_CTRL_RESET 4
/* KVM_IRQ_LINE irq field index values */
+#define KVM_ARM_IRQ_VCPU2_SHIFT 28
+#define KVM_ARM_IRQ_VCPU2_MASK 0xf
#define KVM_ARM_IRQ_TYPE_SHIFT 24
-#define KVM_ARM_IRQ_TYPE_MASK 0xff
+#define KVM_ARM_IRQ_TYPE_MASK 0xf
#define KVM_ARM_IRQ_VCPU_SHIFT 16
#define KVM_ARM_IRQ_VCPU_MASK 0xff
#define KVM_ARM_IRQ_NUM_SHIFT 0
--git a/linux-headers/asm-arm/unistd-common.h b/linux-headers/asm-arm/unistd-common.h
index 27a9b6da27..eb5d361b11 100644
--- a/linux-headers/asm-arm/unistd-common.h
+++ b/linux-headers/asm-arm/unistd-common.h
@@ -388,5 +388,7 @@
#define __NR_fsconfig (__NR_SYSCALL_BASE + 431)
#define __NR_fsmount (__NR_SYSCALL_BASE + 432)
#define __NR_fspick (__NR_SYSCALL_BASE + 433)
+#define __NR_pidfd_open (__NR_SYSCALL_BASE + 434)
+#define __NR_clone3 (__NR_SYSCALL_BASE + 435)
#endif /* _ASM_ARM_UNISTD_COMMON_H */
--git a/linux-headers/asm-arm64/kvm.h b/linux-headers/asm-arm64/kvm.h
index 2431ec35a9..0ce6e49f3a 100644
--- a/linux-headers/asm-arm64/kvm.h
+++ b/linux-headers/asm-arm64/kvm.h
@@ -229,6 +229,16 @@ struct kvm_vcpu_events {
#define KVM_REG_ARM_FW_REG(r) (KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \
KVM_REG_ARM_FW | ((r) & 0xffff))
#define KVM_REG_ARM_PSCI_VERSION KVM_REG_ARM_FW_REG(0)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1 KVM_REG_ARM_FW_REG(1)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL 0
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL 1
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED 2
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2 KVM_REG_ARM_FW_REG(2)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL 0
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN 1
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL 2
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED 3
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED (1U << 4)
/* SVE registers */
#define KVM_REG_ARM64_SVE (0x15 << KVM_REG_ARM_COPROC_SHIFT)
@@ -260,6 +270,13 @@ struct kvm_vcpu_events {
KVM_REG_SIZE_U256 | \
((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
+/*
+ * Register values for KVM_REG_ARM64_SVE_ZREG(), KVM_REG_ARM64_SVE_PREG() and
+ * KVM_REG_ARM64_SVE_FFR() are represented in memory in an endianness-
+ * invariant layout which differs from the layout used for the FPSIMD
+ * V-registers on big-endian systems: see sigcontext.h for more explanation.
+ */
+
#define KVM_ARM64_SVE_VQ_MIN __SVE_VQ_MIN
#define KVM_ARM64_SVE_VQ_MAX __SVE_VQ_MAX
@@ -308,8 +325,10 @@ struct kvm_vcpu_events {
#define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1
/* KVM_IRQ_LINE irq field index values */
+#define KVM_ARM_IRQ_VCPU2_SHIFT 28
+#define KVM_ARM_IRQ_VCPU2_MASK 0xf
#define KVM_ARM_IRQ_TYPE_SHIFT 24
-#define KVM_ARM_IRQ_TYPE_MASK 0xff
+#define KVM_ARM_IRQ_TYPE_MASK 0xf
#define KVM_ARM_IRQ_VCPU_SHIFT 16
#define KVM_ARM_IRQ_VCPU_MASK 0xff
#define KVM_ARM_IRQ_NUM_SHIFT 0
--git a/linux-headers/asm-generic/mman-common.h b/linux-headers/asm-generic/mman-common.h
index abd238d0f7..c160a5354e 100644
--- a/linux-headers/asm-generic/mman-common.h
+++ b/linux-headers/asm-generic/mman-common.h
@@ -19,15 +19,18 @@
#define MAP_TYPE 0x0f /* Mask for type of mapping */
#define MAP_FIXED 0x10 /* Interpret addr exactly */
#define MAP_ANONYMOUS 0x20 /* don't use a file */
-#ifdef CONFIG_MMAP_ALLOW_UNINITIALIZED
-# define MAP_UNINITIALIZED 0x4000000 /* For anonymous mmap, memory could be uninitialized */
-#else
-# define MAP_UNINITIALIZED 0x0 /* Don't support this flag */
-#endif
-/* 0x0100 - 0x80000 flags are defined in asm-generic/mman.h */
+/* 0x0100 - 0x4000 flags are defined in asm-generic/mman.h */
+#define MAP_POPULATE 0x008000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x010000 /* do not block on IO */
+#define MAP_STACK 0x020000 /* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB 0x040000 /* create a huge page mapping */
+#define MAP_SYNC 0x080000 /* perform synchronous page faults for the mapping */
#define MAP_FIXED_NOREPLACE 0x100000 /* MAP_FIXED which doesn't unmap underlying mapping */
+#define MAP_UNINITIALIZED 0x4000000 /* For anonymous mmap, memory could be
+ * uninitialized */
+
/*
* Flags for mlock
*/
@@ -64,6 +67,9 @@
#define MADV_WIPEONFORK 18 /* Zero memory on fork, child only */
#define MADV_KEEPONFORK 19 /* Undo MADV_WIPEONFORK */
+#define MADV_COLD 20 /* deactivate these pages */
+#define MADV_PAGEOUT 21 /* reclaim these pages */
+
/* compatibility flags */
#define MAP_FILE 0
--git a/linux-headers/asm-generic/mman.h b/linux-headers/asm-generic/mman.h
index 653687d977..57e8195d0b 100644
--- a/linux-headers/asm-generic/mman.h
+++ b/linux-headers/asm-generic/mman.h
@@ -9,13 +9,11 @@
#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
#define MAP_LOCKED 0x2000 /* pages are locked */
#define MAP_NORESERVE 0x4000 /* don't check for reservations */
-#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MAP_STACK 0x20000 /* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB 0x40000 /* create a huge page mapping */
-#define MAP_SYNC 0x80000 /* perform synchronous page faults for the mapping */
-/* Bits [26:31] are reserved, see mman-common.h for MAP_HUGETLB usage */
+/*
+ * Bits [26:31] are reserved, see asm-generic/hugetlb_encode.h
+ * for MAP_HUGETLB usage
+ */
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
--git a/linux-headers/asm-generic/unistd.h b/linux-headers/asm-generic/unistd.h
index a87904daf1..1fc8faa6e9 100644
--- a/linux-headers/asm-generic/unistd.h
+++ b/linux-headers/asm-generic/unistd.h
@@ -569,7 +569,7 @@ __SYSCALL(__NR_semget, sys_semget)
__SC_COMP(__NR_semctl, sys_semctl, compat_sys_semctl)
#if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32
#define __NR_semtimedop 192
-__SC_COMP(__NR_semtimedop, sys_semtimedop, sys_semtimedop_time32)
+__SC_3264(__NR_semtimedop, sys_semtimedop_time32, sys_semtimedop)
#endif
#define __NR_semop 193
__SYSCALL(__NR_semop, sys_semop)
@@ -844,9 +844,15 @@ __SYSCALL(__NR_fsconfig, sys_fsconfig)
__SYSCALL(__NR_fsmount, sys_fsmount)
#define __NR_fspick 433
__SYSCALL(__NR_fspick, sys_fspick)
+#define __NR_pidfd_open 434
+__SYSCALL(__NR_pidfd_open, sys_pidfd_open)
+#ifdef __ARCH_WANT_SYS_CLONE3
+#define __NR_clone3 435
+__SYSCALL(__NR_clone3, sys_clone3)
+#endif
#undef __NR_syscalls
-#define __NR_syscalls 434
+#define __NR_syscalls 436
/*
* 32 bit systems traditionally used different
--git a/linux-headers/asm-mips/mman.h b/linux-headers/asm-mips/mman.h
index c2b40969eb..57dc2ac4f8 100644
--- a/linux-headers/asm-mips/mman.h
+++ b/linux-headers/asm-mips/mman.h
@@ -95,6 +95,9 @@
#define MADV_WIPEONFORK 18 /* Zero memory on fork, child only */
#define MADV_KEEPONFORK 19 /* Undo MADV_WIPEONFORK */
+#define MADV_COLD 20 /* deactivate these pages */
+#define MADV_PAGEOUT 21 /* reclaim these pages */
+
/* compatibility flags */
#define MAP_FILE 0
--git a/linux-headers/asm-mips/unistd_n32.h b/linux-headers/asm-mips/unistd_n32.h
index fb988de900..659d5c9ade 100644
--- a/linux-headers/asm-mips/unistd_n32.h
+++ b/linux-headers/asm-mips/unistd_n32.h
@@ -363,6 +363,8 @@
#define __NR_fsconfig (__NR_Linux + 431)
#define __NR_fsmount (__NR_Linux + 432)
#define __NR_fspick (__NR_Linux + 433)
+#define __NR_pidfd_open (__NR_Linux + 434)
+#define __NR_clone3 (__NR_Linux + 435)
#endif /* _ASM_MIPS_UNISTD_N32_H */
--git a/linux-headers/asm-mips/unistd_n64.h b/linux-headers/asm-mips/unistd_n64.h
index 17359163c9..4b6310a05c 100644
--- a/linux-headers/asm-mips/unistd_n64.h
+++ b/linux-headers/asm-mips/unistd_n64.h
@@ -339,6 +339,8 @@
#define __NR_fsconfig (__NR_Linux + 431)
#define __NR_fsmount (__NR_Linux + 432)
#define __NR_fspick (__NR_Linux + 433)
+#define __NR_pidfd_open (__NR_Linux + 434)
+#define __NR_clone3 (__NR_Linux + 435)
#endif /* _ASM_MIPS_UNISTD_N64_H */
--git a/linux-headers/asm-mips/unistd_o32.h b/linux-headers/asm-mips/unistd_o32.h
index 83c8d8fb83..4ce7b4e288 100644
--- a/linux-headers/asm-mips/unistd_o32.h
+++ b/linux-headers/asm-mips/unistd_o32.h
@@ -409,6 +409,8 @@
#define __NR_fsconfig (__NR_Linux + 431)
#define __NR_fsmount (__NR_Linux + 432)
#define __NR_fspick (__NR_Linux + 433)
+#define __NR_pidfd_open (__NR_Linux + 434)
+#define __NR_clone3 (__NR_Linux + 435)
#endif /* _ASM_MIPS_UNISTD_O32_H */
--git a/linux-headers/asm-powerpc/mman.h b/linux-headers/asm-powerpc/mman.h
index 1c2b3fca05..8db7c2a3be 100644
--- a/linux-headers/asm-powerpc/mman.h
+++ b/linux-headers/asm-powerpc/mman.h
@@ -21,15 +21,11 @@
#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
+
#define MCL_CURRENT 0x2000 /* lock all currently mapped pages */
#define MCL_FUTURE 0x4000 /* lock all additions to address space */
#define MCL_ONFAULT 0x8000 /* lock all pages that are faulted in */
-#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MAP_STACK 0x20000 /* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB 0x40000 /* create a huge page mapping */
-
/* Override any generic PKEY permission defines */
#define PKEY_DISABLE_EXECUTE 0x4
#undef PKEY_ACCESS_MASK
--git a/linux-headers/asm-powerpc/unistd_32.h b/linux-headers/asm-powerpc/unistd_32.h
index 04cb2d3e61..5584cc1b4f 100644
--- a/linux-headers/asm-powerpc/unistd_32.h
+++ b/linux-headers/asm-powerpc/unistd_32.h
@@ -416,6 +416,8 @@
#define __NR_fsconfig 431
#define __NR_fsmount 432
#define __NR_fspick 433
+#define __NR_pidfd_open 434
+#define __NR_clone3 435
#endif /* _ASM_POWERPC_UNISTD_32_H */
--git a/linux-headers/asm-powerpc/unistd_64.h b/linux-headers/asm-powerpc/unistd_64.h
index b1e6921490..251bcff77e 100644
--- a/linux-headers/asm-powerpc/unistd_64.h
+++ b/linux-headers/asm-powerpc/unistd_64.h
@@ -388,6 +388,8 @@
#define __NR_fsconfig 431
#define __NR_fsmount 432
#define __NR_fspick 433
+#define __NR_pidfd_open 434
+#define __NR_clone3 435
#endif /* _ASM_POWERPC_UNISTD_64_H */
--git a/linux-headers/asm-s390/kvm.h b/linux-headers/asm-s390/kvm.h
index 03ab5968c7..0138ccb0d8 100644
--- a/linux-headers/asm-s390/kvm.h
+++ b/linux-headers/asm-s390/kvm.h
@@ -231,6 +231,12 @@ struct kvm_guest_debug_arch {
#define KVM_SYNC_GSCB (1UL << 9)
#define KVM_SYNC_BPBC (1UL << 10)
#define KVM_SYNC_ETOKEN (1UL << 11)
+
+#define KVM_SYNC_S390_VALID_FIELDS \
+ (KVM_SYNC_PREFIX | KVM_SYNC_GPRS | KVM_SYNC_ACRS | KVM_SYNC_CRS | \
+ KVM_SYNC_ARCH0 | KVM_SYNC_PFAULT | KVM_SYNC_VRS | KVM_SYNC_RICCB | \
+ KVM_SYNC_FPRS | KVM_SYNC_GSCB | KVM_SYNC_BPBC | KVM_SYNC_ETOKEN)
+
/* length and alignment of the sdnx as a power of two */
#define SDNXC 8
#define SDNXL (1UL << SDNXC)
--git a/linux-headers/asm-s390/unistd_32.h b/linux-headers/asm-s390/unistd_32.h
index 941853f3e9..7cce3ee296 100644
--- a/linux-headers/asm-s390/unistd_32.h
+++ b/linux-headers/asm-s390/unistd_32.h
@@ -406,5 +406,7 @@
#define __NR_fsconfig 431
#define __NR_fsmount 432
#define __NR_fspick 433
+#define __NR_pidfd_open 434
+#define __NR_clone3 435
#endif /* _ASM_S390_UNISTD_32_H */
--git a/linux-headers/asm-s390/unistd_64.h b/linux-headers/asm-s390/unistd_64.h
index 90271d7f82..2371ff1e7a 100644
--- a/linux-headers/asm-s390/unistd_64.h
+++ b/linux-headers/asm-s390/unistd_64.h
@@ -354,5 +354,7 @@
#define __NR_fsconfig 431
#define __NR_fsmount 432
#define __NR_fspick 433
+#define __NR_pidfd_open 434
+#define __NR_clone3 435
#endif /* _ASM_S390_UNISTD_64_H */
--git a/linux-headers/asm-x86/kvm.h b/linux-headers/asm-x86/kvm.h
index 6e7dd792e4..503d3f42da 100644
--- a/linux-headers/asm-x86/kvm.h
+++ b/linux-headers/asm-x86/kvm.h
@@ -378,23 +378,24 @@ struct kvm_sync_regs {
struct kvm_vcpu_events events;
};
-#define KVM_X86_QUIRK_LINT0_REENABLED (1 << 0)
-#define KVM_X86_QUIRK_CD_NW_CLEARED (1 << 1)
-#define KVM_X86_QUIRK_LAPIC_MMIO_HOLE (1 << 2)
-#define KVM_X86_QUIRK_OUT_7E_INC_RIP (1 << 3)
+#define KVM_X86_QUIRK_LINT0_REENABLED (1 << 0)
+#define KVM_X86_QUIRK_CD_NW_CLEARED (1 << 1)
+#define KVM_X86_QUIRK_LAPIC_MMIO_HOLE (1 << 2)
+#define KVM_X86_QUIRK_OUT_7E_INC_RIP (1 << 3)
+#define KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT (1 << 4)
#define KVM_STATE_NESTED_FORMAT_VMX 0
-#define KVM_STATE_NESTED_FORMAT_SVM 1
+#define KVM_STATE_NESTED_FORMAT_SVM 1 /* unused */
#define KVM_STATE_NESTED_GUEST_MODE 0x00000001
#define KVM_STATE_NESTED_RUN_PENDING 0x00000002
#define KVM_STATE_NESTED_EVMCS 0x00000004
-#define KVM_STATE_NESTED_VMX_VMCS_SIZE 0x1000
-
#define KVM_STATE_NESTED_SMM_GUEST_MODE 0x00000001
#define KVM_STATE_NESTED_SMM_VMXON 0x00000002
+#define KVM_STATE_NESTED_VMX_VMCS_SIZE 0x1000
+
struct kvm_vmx_nested_state_data {
__u8 vmcs12[KVM_STATE_NESTED_VMX_VMCS_SIZE];
__u8 shadow_vmcs12[KVM_STATE_NESTED_VMX_VMCS_SIZE];
@@ -432,4 +433,17 @@ struct kvm_nested_state {
} data;
};
+/* for KVM_CAP_PMU_EVENT_FILTER */
+struct kvm_pmu_event_filter {
+ __u32 action;
+ __u32 nevents;
+ __u32 fixed_counter_bitmap;
+ __u32 flags;
+ __u32 pad[4];
+ __u64 events[0];
+};
+
+#define KVM_PMU_EVENT_ALLOW 0
+#define KVM_PMU_EVENT_DENY 1
+
#endif /* _ASM_X86_KVM_H */
--git a/linux-headers/asm-x86/unistd.h b/linux-headers/asm-x86/unistd.h
index c04f638154..498d1515c6 100644
--- a/linux-headers/asm-x86/unistd.h
+++ b/linux-headers/asm-x86/unistd.h
@@ -3,7 +3,7 @@
#define _ASM_X86_UNISTD_H
/* x32 syscall flag bit */
-#define __X32_SYSCALL_BIT 0x40000000
+#define __X32_SYSCALL_BIT 0x40000000UL
# ifdef __i386__
# include <asm/unistd_32.h>
--git a/linux-headers/asm-x86/unistd_32.h b/linux-headers/asm-x86/unistd_32.h
index 57bb48854c..e8ebec1cdc 100644
--- a/linux-headers/asm-x86/unistd_32.h
+++ b/linux-headers/asm-x86/unistd_32.h
@@ -424,5 +424,7 @@
#define __NR_fsconfig 431
#define __NR_fsmount 432
#define __NR_fspick 433
+#define __NR_pidfd_open 434
+#define __NR_clone3 435
#endif /* _ASM_X86_UNISTD_32_H */
--git a/linux-headers/asm-x86/unistd_64.h b/linux-headers/asm-x86/unistd_64.h
index fe6aa0688a..a2f863d549 100644
--- a/linux-headers/asm-x86/unistd_64.h
+++ b/linux-headers/asm-x86/unistd_64.h
@@ -346,5 +346,7 @@
#define __NR_fsconfig 431
#define __NR_fsmount 432
#define __NR_fspick 433
+#define __NR_pidfd_open 434
+#define __NR_clone3 435
#endif /* _ASM_X86_UNISTD_64_H */
--git a/linux-headers/asm-x86/unistd_x32.h b/linux-headers/asm-x86/unistd_x32.h
index 09cca49ba7..4cdc67d848 100644
--- a/linux-headers/asm-x86/unistd_x32.h
+++ b/linux-headers/asm-x86/unistd_x32.h
@@ -299,6 +299,8 @@
#define __NR_fsconfig (__X32_SYSCALL_BIT + 431)
#define __NR_fsmount (__X32_SYSCALL_BIT + 432)
#define __NR_fspick (__X32_SYSCALL_BIT + 433)
+#define __NR_pidfd_open (__X32_SYSCALL_BIT + 434)
+#define __NR_clone3 (__X32_SYSCALL_BIT + 435)
#define __NR_rt_sigaction (__X32_SYSCALL_BIT + 512)
#define __NR_rt_sigreturn (__X32_SYSCALL_BIT + 513)
#define __NR_ioctl (__X32_SYSCALL_BIT + 514)
--git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h
index 18892d6541..3d9b18f7f8 100644
--- a/linux-headers/linux/kvm.h
+++ b/linux-headers/linux/kvm.h
@@ -116,7 +116,7 @@ struct kvm_irq_level {
* ACPI gsi notion of irq.
* For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
* For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
- * For ARM: See Documentation/virtual/kvm/api.txt
+ * For ARM: See Documentation/virt/kvm/api.txt
*/
union {
__u32 irq;
@@ -243,6 +243,8 @@ struct kvm_hyperv_exit {
#define KVM_INTERNAL_ERROR_SIMUL_EX 2
/* Encounter unexpected vm-exit due to delivery event. */
#define KVM_INTERNAL_ERROR_DELIVERY_EV 3
+/* Encounter unexpected vm-exit reason */
+#define KVM_INTERNAL_ERROR_UNEXPECTED_EXIT_REASON 4
/* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */
struct kvm_run {
@@ -995,6 +997,9 @@ struct kvm_ppc_resize_hpt {
#define KVM_CAP_ARM_SVE 170
#define KVM_CAP_ARM_PTRAUTH_ADDRESS 171
#define KVM_CAP_ARM_PTRAUTH_GENERIC 172
+#define KVM_CAP_PMU_EVENT_FILTER 173
+#define KVM_CAP_ARM_IRQ_LINE_LAYOUT_2 174
+#define KVM_CAP_HYPERV_DIRECT_TLBFLUSH 175
#ifdef KVM_CAP_IRQ_ROUTING
@@ -1085,7 +1090,7 @@ struct kvm_xen_hvm_config {
*
* KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
* the irqfd to operate in resampling mode for level triggered interrupt
- * emulation. See Documentation/virtual/kvm/api.txt.
+ * emulation. See Documentation/virt/kvm/api.txt.
*/
#define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
@@ -1141,6 +1146,7 @@ struct kvm_dirty_tlb {
#define KVM_REG_S390 0x5000000000000000ULL
#define KVM_REG_ARM64 0x6000000000000000ULL
#define KVM_REG_MIPS 0x7000000000000000ULL
+#define KVM_REG_RISCV 0x8000000000000000ULL
#define KVM_REG_SIZE_SHIFT 52
#define KVM_REG_SIZE_MASK 0x00f0000000000000ULL
@@ -1329,6 +1335,8 @@ struct kvm_s390_ucas_mapping {
#define KVM_PPC_GET_RMMU_INFO _IOW(KVMIO, 0xb0, struct kvm_ppc_rmmu_info)
/* Available with KVM_CAP_PPC_GET_CPU_CHAR */
#define KVM_PPC_GET_CPU_CHAR _IOR(KVMIO, 0xb1, struct kvm_ppc_cpu_char)
+/* Available with KVM_CAP_PMU_EVENT_FILTER */
+#define KVM_SET_PMU_EVENT_FILTER _IOW(KVMIO, 0xb2, struct kvm_pmu_event_filter)
/* ioctl for vm fd */
#define KVM_CREATE_DEVICE _IOWR(KVMIO, 0xe0, struct kvm_create_device)
--git a/linux-headers/linux/psp-sev.h b/linux-headers/linux/psp-sev.h
index 36bbe17d8f..34c39690c0 100644
--- a/linux-headers/linux/psp-sev.h
+++ b/linux-headers/linux/psp-sev.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
/*
* Userspace interface for AMD Secure Encrypted Virtualization (SEV)
* platform management commands.
@@ -7,10 +8,6 @@
* Author: Brijesh Singh <brijesh.singh@amd.com>
*
* SEV API specification is available at: https://developer.amd.com/sev/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __PSP_SEV_USER_H__
--git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h
index 24f505199f..fb10370d29 100644
--- a/linux-headers/linux/vfio.h
+++ b/linux-headers/linux/vfio.h
@@ -295,15 +295,38 @@ struct vfio_region_info_cap_type {
__u32 subtype; /* type specific */
};
+/*
+ * List of region types, global per bus driver.
+ * If you introduce a new type, please add it here.
+ */
+
+/* PCI region type containing a PCI vendor part */
#define VFIO_REGION_TYPE_PCI_VENDOR_TYPE (1 << 31)
#define VFIO_REGION_TYPE_PCI_VENDOR_MASK (0xffff)
+#define VFIO_REGION_TYPE_GFX (1)
+#define VFIO_REGION_TYPE_CCW (2)
+
+/* sub-types for VFIO_REGION_TYPE_PCI_* */
-/* 8086 Vendor sub-types */
+/* 8086 vendor PCI sub-types */
#define VFIO_REGION_SUBTYPE_INTEL_IGD_OPREGION (1)
#define VFIO_REGION_SUBTYPE_INTEL_IGD_HOST_CFG (2)
#define VFIO_REGION_SUBTYPE_INTEL_IGD_LPC_CFG (3)
-#define VFIO_REGION_TYPE_GFX (1)
+/* 10de vendor PCI sub-types */
+/*
+ * NVIDIA GPU NVlink2 RAM is coherent RAM mapped onto the host address space.
+ */
+#define VFIO_REGION_SUBTYPE_NVIDIA_NVLINK2_RAM (1)
+
+/* 1014 vendor PCI sub-types */
+/*
+ * IBM NPU NVlink2 ATSD (Address Translation Shootdown) register of NPU
+ * to do TLB invalidation on a GPU.
+ */
+#define VFIO_REGION_SUBTYPE_IBM_NVLINK2_ATSD (1)
+
+/* sub-types for VFIO_REGION_TYPE_GFX */
#define VFIO_REGION_SUBTYPE_GFX_EDID (1)
/**
@@ -353,25 +376,9 @@ struct vfio_region_gfx_edid {
#define VFIO_DEVICE_GFX_LINK_STATE_DOWN 2
};
-#define VFIO_REGION_TYPE_CCW (2)
-/* ccw sub-types */
+/* sub-types for VFIO_REGION_TYPE_CCW */
#define VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD (1)
-/*
- * 10de vendor sub-type
- *
- * NVIDIA GPU NVlink2 RAM is coherent RAM mapped onto the host address space.
- */
-#define VFIO_REGION_SUBTYPE_NVIDIA_NVLINK2_RAM (1)
-
-/*
- * 1014 vendor sub-type
- *
- * IBM NPU NVlink2 ATSD (Address Translation Shootdown) register of NPU
- * to do TLB invalidation on a GPU.
- */
-#define VFIO_REGION_SUBTYPE_IBM_NVLINK2_ATSD (1)
-
/*
* The MSIX mappable capability informs that MSIX data of a BAR can be mmapped
* which allows direct access to non-MSIX registers which happened to be within
@@ -714,7 +721,31 @@ struct vfio_iommu_type1_info {
__u32 argsz;
__u32 flags;
#define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */
- __u64 iova_pgsizes; /* Bitmap of supported page sizes */
+#define VFIO_IOMMU_INFO_CAPS (1 << 1) /* Info supports caps */
+ __u64 iova_pgsizes; /* Bitmap of supported page sizes */
+ __u32 cap_offset; /* Offset within info struct of first cap */
+};
+
+/*
+ * The IOVA capability allows to report the valid IOVA range(s)
+ * excluding any non-relaxable reserved regions exposed by
+ * devices attached to the container. Any DMA map attempt
+ * outside the valid iova range will return error.
+ *
+ * The structures below define version 1 of this capability.
+ */
+#define VFIO_IOMMU_TYPE1_INFO_CAP_IOVA_RANGE 1
+
+struct vfio_iova_range {
+ __u64 start;
+ __u64 end;
+};
+
+struct vfio_iommu_type1_info_cap_iova_range {
+ struct vfio_info_cap_header header;
+ __u32 nr_iovas;
+ __u32 reserved;
+ struct vfio_iova_range iova_ranges[];
};
#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
--
2.14.5
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH V2 2/2] target/i386/kvm: Add Hyper-V direct tlb flush support
2019-10-15 14:36 ` lantianyu1986
(?)
(?)
@ 2019-10-15 14:36 ` lantianyu1986
2019-10-15 17:01 ` Vitaly Kuznetsov
-1 siblings, 1 reply; 6+ messages in thread
From: lantianyu1986 @ 2019-10-15 14:36 UTC (permalink / raw)
To: mst, cohuck, pbonzini, rth, ehabkost, mtosatti, vkuznets, rkagan
Cc: Tianyu Lan, qemu-devel, kvm
From: Tianyu Lan <Tianyu.Lan@microsoft.com>
Hyper-V direct tlb flush targets KVM on Hyper-V guest.
Enable direct TLB flush for its guests meaning that TLB
flush hypercalls are handled by Level 0 hypervisor (Hyper-V)
bypassing KVM in Level 1. Due to the different ABI for hypercall
parameters between Hyper-V and KVM, KVM capabilities should be
hidden when enable Hyper-V direct tlb flush otherwise KVM
hypercalls may be intercepted by Hyper-V. Add new parameter
"hv-direct-tlbflush". Check expose_kvm and Hyper-V tlb flush
capability status before enabling the feature.
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
---
Change since V1:
- Add direct tlb flush's Hyper-V property and use
hv_cpuid_check_and_set() to check the dependency of tlbflush
feature.
- Make new feature work with Hyper-V passthrough mode.
---
docs/hyperv.txt | 12 ++++++++++++
target/i386/cpu.c | 2 ++
target/i386/cpu.h | 1 +
target/i386/kvm.c | 23 +++++++++++++++++++++++
4 files changed, 38 insertions(+)
diff --git a/docs/hyperv.txt b/docs/hyperv.txt
index 8fdf25c829..ceab8c21fe 100644
--- a/docs/hyperv.txt
+++ b/docs/hyperv.txt
@@ -184,6 +184,18 @@ enabled.
Requires: hv-vpindex, hv-synic, hv-time, hv-stimer
+3.18. hv-direct-tlbflush
+=======================
+The enlightenment targets KVM on Hyper-V guest. Enable direct TLB flush for
+its guests meaning that TLB flush hypercalls are handled by Level 0 hypervisor
+(Hyper-V) bypassing KVM in Level 1. Due to the different ABI for hypercall
+parameters between Hyper-V and KVM, enabling this capability effectively
+disables all hypercall handling by KVM (as some KVM hypercall may be mistakenly
+treated as TLB flush hypercalls by Hyper-V). So kvm capability should not show
+to guest when enable this capability. If not, user will fail to enable this
+capability.
+
+Requires: hv-tlbflush, -kvm
4. Development features
========================
diff --git a/target/i386/cpu.c b/target/i386/cpu.c
index 44f1bbdcac..7bc7fee512 100644
--- a/target/i386/cpu.c
+++ b/target/i386/cpu.c
@@ -6156,6 +6156,8 @@ static Property x86_cpu_properties[] = {
HYPERV_FEAT_IPI, 0),
DEFINE_PROP_BIT64("hv-stimer-direct", X86CPU, hyperv_features,
HYPERV_FEAT_STIMER_DIRECT, 0),
+ DEFINE_PROP_BIT64("hv-direct-tlbflush", X86CPU, hyperv_features,
+ HYPERV_FEAT_DIRECT_TLBFLUSH, 0),
DEFINE_PROP_BOOL("hv-passthrough", X86CPU, hyperv_passthrough, false),
DEFINE_PROP_BOOL("check", X86CPU, check_cpuid, true),
diff --git a/target/i386/cpu.h b/target/i386/cpu.h
index eaa5395aa5..3cb105f7d6 100644
--- a/target/i386/cpu.h
+++ b/target/i386/cpu.h
@@ -907,6 +907,7 @@ typedef uint64_t FeatureWordArray[FEATURE_WORDS];
#define HYPERV_FEAT_EVMCS 12
#define HYPERV_FEAT_IPI 13
#define HYPERV_FEAT_STIMER_DIRECT 14
+#define HYPERV_FEAT_DIRECT_TLBFLUSH 15
#ifndef HYPERV_SPINLOCK_NEVER_RETRY
#define HYPERV_SPINLOCK_NEVER_RETRY 0xFFFFFFFF
diff --git a/target/i386/kvm.c b/target/i386/kvm.c
index 11b9c854b5..7e0fbc730e 100644
--- a/target/i386/kvm.c
+++ b/target/i386/kvm.c
@@ -900,6 +900,10 @@ static struct {
},
.dependencies = BIT(HYPERV_FEAT_STIMER)
},
+ [HYPERV_FEAT_DIRECT_TLBFLUSH] = {
+ .desc = "direct tlbflush (hv-direct-tlbflush)",
+ .dependencies = BIT(HYPERV_FEAT_TLBFLUSH)
+ },
};
static struct kvm_cpuid2 *try_get_hv_cpuid(CPUState *cs, int max)
@@ -1224,6 +1228,7 @@ static int hyperv_handle_properties(CPUState *cs,
r |= hv_cpuid_check_and_set(cs, cpuid, HYPERV_FEAT_EVMCS);
r |= hv_cpuid_check_and_set(cs, cpuid, HYPERV_FEAT_IPI);
r |= hv_cpuid_check_and_set(cs, cpuid, HYPERV_FEAT_STIMER_DIRECT);
+ r |= hv_cpuid_check_and_set(cs, cpuid, HYPERV_FEAT_DIRECT_TLBFLUSH);
/* Additional dependencies not covered by kvm_hyperv_properties[] */
if (hyperv_feat_enabled(cpu, HYPERV_FEAT_SYNIC) &&
@@ -1243,6 +1248,24 @@ static int hyperv_handle_properties(CPUState *cs,
goto free;
}
+ if (hyperv_feat_enabled(cpu, HYPERV_FEAT_DIRECT_TLBFLUSH) ||
+ cpu->hyperv_passthrough) {
+ if (!cpu->expose_kvm) {
+ r = kvm_vcpu_enable_cap(cs, KVM_CAP_HYPERV_DIRECT_TLBFLUSH, 0, 0);
+ if (hyperv_feat_enabled(cpu, HYPERV_FEAT_DIRECT_TLBFLUSH) && r) {
+ fprintf(stderr,
+ "Hyper-V %s is not supported by kernel\n",
+ kvm_hyperv_properties[HYPERV_FEAT_DIRECT_TLBFLUSH].desc);
+ return -ENOSYS;
+ }
+ } else if (!cpu->hyperv_passthrough) {
+ fprintf(stderr,
+ "Hyper-V %s requires not to expose KVM capabilities.\n",
+ kvm_hyperv_properties[HYPERV_FEAT_DIRECT_TLBFLUSH].desc);
+ return -ENOSYS;
+ }
+ }
+
if (cpu->hyperv_passthrough) {
/* We already copied all feature words from KVM as is */
r = cpuid->nent;
--
2.14.5
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH V2 2/2] target/i386/kvm: Add Hyper-V direct tlb flush support
2019-10-15 14:36 ` [PATCH V2 2/2] target/i386/kvm: Add Hyper-V direct tlb flush support lantianyu1986
@ 2019-10-15 17:01 ` Vitaly Kuznetsov
0 siblings, 0 replies; 6+ messages in thread
From: Vitaly Kuznetsov @ 2019-10-15 17:01 UTC (permalink / raw)
To: lantianyu1986
Cc: Tianyu Lan, qemu-devel, kvm, mst, cohuck, pbonzini, rth,
ehabkost, mtosatti, rkagan
lantianyu1986@gmail.com writes:
> From: Tianyu Lan <Tianyu.Lan@microsoft.com>
>
> Hyper-V direct tlb flush targets KVM on Hyper-V guest.
> Enable direct TLB flush for its guests meaning that TLB
> flush hypercalls are handled by Level 0 hypervisor (Hyper-V)
> bypassing KVM in Level 1. Due to the different ABI for hypercall
> parameters between Hyper-V and KVM, KVM capabilities should be
> hidden when enable Hyper-V direct tlb flush otherwise KVM
> hypercalls may be intercepted by Hyper-V. Add new parameter
> "hv-direct-tlbflush". Check expose_kvm and Hyper-V tlb flush
> capability status before enabling the feature.
>
> Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
> ---
> Change since V1:
> - Add direct tlb flush's Hyper-V property and use
> hv_cpuid_check_and_set() to check the dependency of tlbflush
> feature.
> - Make new feature work with Hyper-V passthrough mode.
> ---
> docs/hyperv.txt | 12 ++++++++++++
> target/i386/cpu.c | 2 ++
> target/i386/cpu.h | 1 +
> target/i386/kvm.c | 23 +++++++++++++++++++++++
> 4 files changed, 38 insertions(+)
>
> diff --git a/docs/hyperv.txt b/docs/hyperv.txt
> index 8fdf25c829..ceab8c21fe 100644
> --- a/docs/hyperv.txt
> +++ b/docs/hyperv.txt
> @@ -184,6 +184,18 @@ enabled.
>
> Requires: hv-vpindex, hv-synic, hv-time, hv-stimer
>
> +3.18. hv-direct-tlbflush
> +=======================
> +The enlightenment targets KVM on Hyper-V guest. Enable direct TLB flush for
> +its guests meaning that TLB flush hypercalls are handled by Level 0 hypervisor
> +(Hyper-V) bypassing KVM in Level 1. Due to the different ABI for hypercall
> +parameters between Hyper-V and KVM, enabling this capability effectively
> +disables all hypercall handling by KVM (as some KVM hypercall may be mistakenly
> +treated as TLB flush hypercalls by Hyper-V). So kvm capability should not show
> +to guest when enable this capability. If not, user will fail to enable this
> +capability.
My take:
"Enable direct TLB flush for KVM when it is running as a nested
hypervisor on top Hyper-V. When enabled, TLB flush hypercalls from L2
guests are being passed through to L0 (Hyper-V) for handling. Due to ABI
differences between Hyper-V and KVM hypercalls, L2 guests will not be
able to issue KVM hypercalls (as those could be mishanled by L0
Hyper-V), this requires KVM hypervisor signature to be hidden."
It would be great if someone who doesn't know that the feature is would
read these two paragraphs and tell us how they sound :-)
> +
> +Requires: hv-tlbflush, -kvm
>
> 4. Development features
> ========================
> diff --git a/target/i386/cpu.c b/target/i386/cpu.c
> index 44f1bbdcac..7bc7fee512 100644
> --- a/target/i386/cpu.c
> +++ b/target/i386/cpu.c
> @@ -6156,6 +6156,8 @@ static Property x86_cpu_properties[] = {
> HYPERV_FEAT_IPI, 0),
> DEFINE_PROP_BIT64("hv-stimer-direct", X86CPU, hyperv_features,
> HYPERV_FEAT_STIMER_DIRECT, 0),
> + DEFINE_PROP_BIT64("hv-direct-tlbflush", X86CPU, hyperv_features,
> + HYPERV_FEAT_DIRECT_TLBFLUSH, 0),
> DEFINE_PROP_BOOL("hv-passthrough", X86CPU, hyperv_passthrough, false),
>
> DEFINE_PROP_BOOL("check", X86CPU, check_cpuid, true),
> diff --git a/target/i386/cpu.h b/target/i386/cpu.h
> index eaa5395aa5..3cb105f7d6 100644
> --- a/target/i386/cpu.h
> +++ b/target/i386/cpu.h
> @@ -907,6 +907,7 @@ typedef uint64_t FeatureWordArray[FEATURE_WORDS];
> #define HYPERV_FEAT_EVMCS 12
> #define HYPERV_FEAT_IPI 13
> #define HYPERV_FEAT_STIMER_DIRECT 14
> +#define HYPERV_FEAT_DIRECT_TLBFLUSH 15
>
> #ifndef HYPERV_SPINLOCK_NEVER_RETRY
> #define HYPERV_SPINLOCK_NEVER_RETRY 0xFFFFFFFF
> diff --git a/target/i386/kvm.c b/target/i386/kvm.c
> index 11b9c854b5..7e0fbc730e 100644
> --- a/target/i386/kvm.c
> +++ b/target/i386/kvm.c
> @@ -900,6 +900,10 @@ static struct {
> },
> .dependencies = BIT(HYPERV_FEAT_STIMER)
> },
> + [HYPERV_FEAT_DIRECT_TLBFLUSH] = {
> + .desc = "direct tlbflush (hv-direct-tlbflush)",
"direct TLB flush" (to be consistent with "paravirtualized TLB flush" above
> + .dependencies = BIT(HYPERV_FEAT_TLBFLUSH)
> + },
> };
>
> static struct kvm_cpuid2 *try_get_hv_cpuid(CPUState *cs, int max)
> @@ -1224,6 +1228,7 @@ static int hyperv_handle_properties(CPUState *cs,
> r |= hv_cpuid_check_and_set(cs, cpuid, HYPERV_FEAT_EVMCS);
> r |= hv_cpuid_check_and_set(cs, cpuid, HYPERV_FEAT_IPI);
> r |= hv_cpuid_check_and_set(cs, cpuid, HYPERV_FEAT_STIMER_DIRECT);
> + r |= hv_cpuid_check_and_set(cs, cpuid, HYPERV_FEAT_DIRECT_TLBFLUSH);
>
> /* Additional dependencies not covered by kvm_hyperv_properties[] */
> if (hyperv_feat_enabled(cpu, HYPERV_FEAT_SYNIC) &&
> @@ -1243,6 +1248,24 @@ static int hyperv_handle_properties(CPUState *cs,
> goto free;
> }
>
> + if (hyperv_feat_enabled(cpu, HYPERV_FEAT_DIRECT_TLBFLUSH) ||
> + cpu->hyperv_passthrough) {
> + if (!cpu->expose_kvm) {
> + r = kvm_vcpu_enable_cap(cs, KVM_CAP_HYPERV_DIRECT_TLBFLUSH, 0, 0);
> + if (hyperv_feat_enabled(cpu, HYPERV_FEAT_DIRECT_TLBFLUSH) && r) {
> + fprintf(stderr,
> + "Hyper-V %s is not supported by kernel\n",
> + kvm_hyperv_properties[HYPERV_FEAT_DIRECT_TLBFLUSH].desc);
> + return -ENOSYS;
> + }
> + } else if (!cpu->hyperv_passthrough) {
> + fprintf(stderr,
> + "Hyper-V %s requires not to expose KVM capabilities.\n",
My take:
"... requires KVM hypervisor signature to be hidden (-kvm)."
> + kvm_hyperv_properties[HYPERV_FEAT_DIRECT_TLBFLUSH].desc);
> + return -ENOSYS;
> + }
> + }
Thanks, the check looks correct to me now.
> +
> if (cpu->hyperv_passthrough) {
> /* We already copied all feature words from KVM as is */
> r = cpuid->nent;
--
Vitaly
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH V2 2/2] target/i386/kvm: Add Hyper-V direct tlb flush support
@ 2019-10-15 17:01 ` Vitaly Kuznetsov
0 siblings, 0 replies; 6+ messages in thread
From: Vitaly Kuznetsov @ 2019-10-15 17:01 UTC (permalink / raw)
To: lantianyu1986
Cc: mtosatti, Tianyu Lan, ehabkost, kvm, mst, cohuck, qemu-devel,
rkagan, pbonzini, rth
lantianyu1986@gmail.com writes:
> From: Tianyu Lan <Tianyu.Lan@microsoft.com>
>
> Hyper-V direct tlb flush targets KVM on Hyper-V guest.
> Enable direct TLB flush for its guests meaning that TLB
> flush hypercalls are handled by Level 0 hypervisor (Hyper-V)
> bypassing KVM in Level 1. Due to the different ABI for hypercall
> parameters between Hyper-V and KVM, KVM capabilities should be
> hidden when enable Hyper-V direct tlb flush otherwise KVM
> hypercalls may be intercepted by Hyper-V. Add new parameter
> "hv-direct-tlbflush". Check expose_kvm and Hyper-V tlb flush
> capability status before enabling the feature.
>
> Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
> ---
> Change since V1:
> - Add direct tlb flush's Hyper-V property and use
> hv_cpuid_check_and_set() to check the dependency of tlbflush
> feature.
> - Make new feature work with Hyper-V passthrough mode.
> ---
> docs/hyperv.txt | 12 ++++++++++++
> target/i386/cpu.c | 2 ++
> target/i386/cpu.h | 1 +
> target/i386/kvm.c | 23 +++++++++++++++++++++++
> 4 files changed, 38 insertions(+)
>
> diff --git a/docs/hyperv.txt b/docs/hyperv.txt
> index 8fdf25c829..ceab8c21fe 100644
> --- a/docs/hyperv.txt
> +++ b/docs/hyperv.txt
> @@ -184,6 +184,18 @@ enabled.
>
> Requires: hv-vpindex, hv-synic, hv-time, hv-stimer
>
> +3.18. hv-direct-tlbflush
> +=======================
> +The enlightenment targets KVM on Hyper-V guest. Enable direct TLB flush for
> +its guests meaning that TLB flush hypercalls are handled by Level 0 hypervisor
> +(Hyper-V) bypassing KVM in Level 1. Due to the different ABI for hypercall
> +parameters between Hyper-V and KVM, enabling this capability effectively
> +disables all hypercall handling by KVM (as some KVM hypercall may be mistakenly
> +treated as TLB flush hypercalls by Hyper-V). So kvm capability should not show
> +to guest when enable this capability. If not, user will fail to enable this
> +capability.
My take:
"Enable direct TLB flush for KVM when it is running as a nested
hypervisor on top Hyper-V. When enabled, TLB flush hypercalls from L2
guests are being passed through to L0 (Hyper-V) for handling. Due to ABI
differences between Hyper-V and KVM hypercalls, L2 guests will not be
able to issue KVM hypercalls (as those could be mishanled by L0
Hyper-V), this requires KVM hypervisor signature to be hidden."
It would be great if someone who doesn't know that the feature is would
read these two paragraphs and tell us how they sound :-)
> +
> +Requires: hv-tlbflush, -kvm
>
> 4. Development features
> ========================
> diff --git a/target/i386/cpu.c b/target/i386/cpu.c
> index 44f1bbdcac..7bc7fee512 100644
> --- a/target/i386/cpu.c
> +++ b/target/i386/cpu.c
> @@ -6156,6 +6156,8 @@ static Property x86_cpu_properties[] = {
> HYPERV_FEAT_IPI, 0),
> DEFINE_PROP_BIT64("hv-stimer-direct", X86CPU, hyperv_features,
> HYPERV_FEAT_STIMER_DIRECT, 0),
> + DEFINE_PROP_BIT64("hv-direct-tlbflush", X86CPU, hyperv_features,
> + HYPERV_FEAT_DIRECT_TLBFLUSH, 0),
> DEFINE_PROP_BOOL("hv-passthrough", X86CPU, hyperv_passthrough, false),
>
> DEFINE_PROP_BOOL("check", X86CPU, check_cpuid, true),
> diff --git a/target/i386/cpu.h b/target/i386/cpu.h
> index eaa5395aa5..3cb105f7d6 100644
> --- a/target/i386/cpu.h
> +++ b/target/i386/cpu.h
> @@ -907,6 +907,7 @@ typedef uint64_t FeatureWordArray[FEATURE_WORDS];
> #define HYPERV_FEAT_EVMCS 12
> #define HYPERV_FEAT_IPI 13
> #define HYPERV_FEAT_STIMER_DIRECT 14
> +#define HYPERV_FEAT_DIRECT_TLBFLUSH 15
>
> #ifndef HYPERV_SPINLOCK_NEVER_RETRY
> #define HYPERV_SPINLOCK_NEVER_RETRY 0xFFFFFFFF
> diff --git a/target/i386/kvm.c b/target/i386/kvm.c
> index 11b9c854b5..7e0fbc730e 100644
> --- a/target/i386/kvm.c
> +++ b/target/i386/kvm.c
> @@ -900,6 +900,10 @@ static struct {
> },
> .dependencies = BIT(HYPERV_FEAT_STIMER)
> },
> + [HYPERV_FEAT_DIRECT_TLBFLUSH] = {
> + .desc = "direct tlbflush (hv-direct-tlbflush)",
"direct TLB flush" (to be consistent with "paravirtualized TLB flush" above
> + .dependencies = BIT(HYPERV_FEAT_TLBFLUSH)
> + },
> };
>
> static struct kvm_cpuid2 *try_get_hv_cpuid(CPUState *cs, int max)
> @@ -1224,6 +1228,7 @@ static int hyperv_handle_properties(CPUState *cs,
> r |= hv_cpuid_check_and_set(cs, cpuid, HYPERV_FEAT_EVMCS);
> r |= hv_cpuid_check_and_set(cs, cpuid, HYPERV_FEAT_IPI);
> r |= hv_cpuid_check_and_set(cs, cpuid, HYPERV_FEAT_STIMER_DIRECT);
> + r |= hv_cpuid_check_and_set(cs, cpuid, HYPERV_FEAT_DIRECT_TLBFLUSH);
>
> /* Additional dependencies not covered by kvm_hyperv_properties[] */
> if (hyperv_feat_enabled(cpu, HYPERV_FEAT_SYNIC) &&
> @@ -1243,6 +1248,24 @@ static int hyperv_handle_properties(CPUState *cs,
> goto free;
> }
>
> + if (hyperv_feat_enabled(cpu, HYPERV_FEAT_DIRECT_TLBFLUSH) ||
> + cpu->hyperv_passthrough) {
> + if (!cpu->expose_kvm) {
> + r = kvm_vcpu_enable_cap(cs, KVM_CAP_HYPERV_DIRECT_TLBFLUSH, 0, 0);
> + if (hyperv_feat_enabled(cpu, HYPERV_FEAT_DIRECT_TLBFLUSH) && r) {
> + fprintf(stderr,
> + "Hyper-V %s is not supported by kernel\n",
> + kvm_hyperv_properties[HYPERV_FEAT_DIRECT_TLBFLUSH].desc);
> + return -ENOSYS;
> + }
> + } else if (!cpu->hyperv_passthrough) {
> + fprintf(stderr,
> + "Hyper-V %s requires not to expose KVM capabilities.\n",
My take:
"... requires KVM hypervisor signature to be hidden (-kvm)."
> + kvm_hyperv_properties[HYPERV_FEAT_DIRECT_TLBFLUSH].desc);
> + return -ENOSYS;
> + }
> + }
Thanks, the check looks correct to me now.
> +
> if (cpu->hyperv_passthrough) {
> /* We already copied all feature words from KVM as is */
> r = cpuid->nent;
--
Vitaly
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-10-15 17:03 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-15 14:36 [PATCH V2 0/2] target/i386/kvm: Add Hyper-V direct tlb flush support lantianyu1986
2019-10-15 14:36 ` lantianyu1986
2019-10-15 14:36 ` [PATCH V2 1/2] linux headers: update against Linux 5.4-rc2 lantianyu1986
2019-10-15 14:36 ` [PATCH V2 2/2] target/i386/kvm: Add Hyper-V direct tlb flush support lantianyu1986
2019-10-15 17:01 ` Vitaly Kuznetsov
2019-10-15 17:01 ` Vitaly Kuznetsov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.