All of lore.kernel.org
 help / color / mirror / Atom feed
From: Curtis Malainey <cujomalainey@chromium.org>
To: alsa-devel@alsa-project.org
Cc: Oder Chiou <oder_chiou@realtek.com>,
	Takashi Iwai <tiwai@suse.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Ben Zhang <benzh@chromium.org>, Mark Brown <broonie@kernel.org>,
	Bard Liao <bardliao@realtek.com>,
	Curtis Malainey <cujomalainey@chromium.org>
Subject: [alsa-devel] [PATCH v2 07/12] ASoC: rt5677: Stop and restart DSP over suspend/resume
Date: Fri, 18 Oct 2019 13:04:44 -0700	[thread overview]
Message-ID: <20191018200449.141123-8-cujomalainey@chromium.org> (raw)
In-Reply-To: <20191018200449.141123-1-cujomalainey@chromium.org>

From: Ben Zhang <benzh@chromium.org>

MCLK1 gets disabled at suspend and re-enabled at resume. Before
MCLK1 is re-enabled, if the DSP is already on (either the DSP was
left on during suspend, or the DSP is turned on early at resume),
i2c register read returns garbage and corrupts the regmap cache.

This patch stops the DSP before suspend and restarts it after
resume with a dalay to ensure MCLK is on while loading firmware.

Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
---
 sound/soc/codecs/rt5677.c | 24 +++++++++++++++++++++---
 sound/soc/codecs/rt5677.h |  3 ++-
 2 files changed, 23 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index 7bf8d9fb88a5f..990764a76390f 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -878,6 +878,7 @@ static int rt5677_load_dsp_from_file(struct rt5677_priv *rt5677)
 static int rt5677_set_dsp_vad(struct snd_soc_component *component, bool on)
 {
 	struct rt5677_priv *rt5677 = snd_soc_component_get_drvdata(component);
+	rt5677->dsp_vad_en_request = on;
 	rt5677->dsp_vad_en = on;
 
 	if (!IS_ENABLED(CONFIG_SND_SOC_RT5677_SPI))
@@ -971,7 +972,7 @@ static int rt5677_dsp_vad_get(struct snd_kcontrol *kcontrol,
 	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
 	struct rt5677_priv *rt5677 = snd_soc_component_get_drvdata(component);
 
-	ucontrol->value.integer.value[0] = rt5677->dsp_vad_en;
+	ucontrol->value.integer.value[0] = rt5677->dsp_vad_en_request;
 
 	return 0;
 }
@@ -4638,14 +4639,15 @@ static int rt5677_set_bias_level(struct snd_soc_component *component,
 			enum snd_soc_bias_level level)
 {
 	struct rt5677_priv *rt5677 = snd_soc_component_get_drvdata(component);
+	enum snd_soc_bias_level prev_bias =
+		snd_soc_component_get_bias_level(component);
 
 	switch (level) {
 	case SND_SOC_BIAS_ON:
 		break;
 
 	case SND_SOC_BIAS_PREPARE:
-		if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_STANDBY) {
-			rt5677_set_dsp_vad(component, false);
+		if (prev_bias == SND_SOC_BIAS_STANDBY) {
 
 			regmap_update_bits(rt5677->regmap, RT5677_PWR_ANLG1,
 				RT5677_LDO1_SEL_MASK | RT5677_LDO2_SEL_MASK,
@@ -4669,9 +4671,25 @@ static int rt5677_set_bias_level(struct snd_soc_component *component,
 		break;
 
 	case SND_SOC_BIAS_STANDBY:
+		if (prev_bias == SND_SOC_BIAS_OFF &&
+				rt5677->dsp_vad_en_request) {
+			/* Re-enable the DSP if it was turned off at suspend */
+			rt5677->dsp_vad_en = true;
+			/* The delay is to wait for MCLK */
+			schedule_delayed_work(&rt5677->dsp_work,
+					msecs_to_jiffies(1000));
+		}
 		break;
 
 	case SND_SOC_BIAS_OFF:
+		flush_delayed_work(&rt5677->dsp_work);
+		if (rt5677->is_dsp_mode) {
+			/* Turn off the DSP before suspend */
+			rt5677->dsp_vad_en = false;
+			schedule_delayed_work(&rt5677->dsp_work, 0);
+			flush_delayed_work(&rt5677->dsp_work);
+		}
+
 		regmap_update_bits(rt5677->regmap, RT5677_DIG_MISC, 0x1, 0x0);
 		regmap_write(rt5677->regmap, RT5677_PWR_DIG1, 0x0000);
 		regmap_write(rt5677->regmap, RT5677_PWR_ANLG1,
diff --git a/sound/soc/codecs/rt5677.h b/sound/soc/codecs/rt5677.h
index d18b41da1176b..046ed2ee8e31e 100644
--- a/sound/soc/codecs/rt5677.h
+++ b/sound/soc/codecs/rt5677.h
@@ -1846,7 +1846,8 @@ struct rt5677_priv {
 #ifdef CONFIG_GPIOLIB
 	struct gpio_chip gpio_chip;
 #endif
-	bool dsp_vad_en; /* DSP VAD enable/disable request */
+	bool dsp_vad_en_request; /* DSP VAD enable/disable request */
+	bool dsp_vad_en; /* dsp_work parameter */
 	bool is_dsp_mode;
 	bool is_vref_slow;
 	struct delayed_work dsp_work;
-- 
2.23.0.866.gb869b98d4c-goog

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  parent reply	other threads:[~2019-10-18 20:19 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-18 20:04 [alsa-devel] [PATCH v2 00/12] Add Samus Hotwording for RT5677 Curtis Malainey
2019-10-18 20:04 ` [alsa-devel] [PATCH v2 01/12] ASoC: rt5677: Add a PCM device for streaming hotword via SPI Curtis Malainey
2019-10-22 18:15   ` [alsa-devel] Applied "ASoC: rt5677: Add a PCM device for streaming hotword via SPI" to the asoc tree Mark Brown
2019-10-18 20:04 ` [alsa-devel] [PATCH v2 02/12] ASoC: rt5677: Load firmware via SPI using delayed work Curtis Malainey
2019-10-22 16:13   ` Mark Brown
2019-10-22 18:28     ` Curtis Malainey
2019-10-22 19:01       ` Mark Brown
2019-10-25 23:34         ` Curtis Malainey
2019-10-18 20:04 ` [alsa-devel] [PATCH v2 03/12] ASoC: bdw-rt5677: Add a DAI link for rt5677 SPI PCM device Curtis Malainey
2019-10-18 20:04 ` [alsa-devel] [PATCH v2 04/12] ASoC: rt5677: Enable jack detect while DSP is running Curtis Malainey
2019-10-18 20:04 ` [alsa-devel] [PATCH v2 05/12] ASoC: rt5677: Add DAPM audio path for hotword stream Curtis Malainey
2019-10-18 20:04 ` [alsa-devel] [PATCH v2 06/12] ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatile Curtis Malainey
2019-10-18 20:04 ` Curtis Malainey [this message]
2019-10-18 20:04 ` [alsa-devel] [PATCH v2 08/12] ASoC: rt5677: Disable irq at suspend Curtis Malainey
2019-10-18 20:04 ` [alsa-devel] [PATCH v2 09/12] ASoC: rt5677: Allow VAD to be shut on/off at all times Curtis Malainey
2019-10-18 20:04 ` [alsa-devel] [PATCH v2 10/12] ASoC: bdw-rt5677: Turn on MCLK1 for DSP via DAPM Curtis Malainey
2019-10-18 20:04 ` [alsa-devel] [PATCH v2 11/12] ASoC: rt5677: Set ADC clock to use PLL and enable ASRC Curtis Malainey
2019-10-20 20:38   ` Cezary Rojewski
2019-10-21 19:38     ` Curtis Malainey
2019-10-18 20:04 ` [alsa-devel] [PATCH v2 12/12] ASoC: rt5677: Wait for DSP to boot before loading firmware Curtis Malainey

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191018200449.141123-8-cujomalainey@chromium.org \
    --to=cujomalainey@chromium.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=bardliao@realtek.com \
    --cc=benzh@chromium.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=oder_chiou@realtek.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.