Hi Dan,

On Mon, Sep 30, 2019 at 09:31:37AM -0500, Dan Murphy wrote:
> Introduce the bq25150 and bq25155 supply chargers.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>  drivers/power/supply/Kconfig           |   8 +
>  drivers/power/supply/Makefile          |   1 +
>  drivers/power/supply/bq2515x_charger.c | 743 +++++++++++++++++++++++++
>  3 files changed, 752 insertions(+)
>  create mode 100644 drivers/power/supply/bq2515x_charger.c
> 
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index c84a7b1caeb6..d6228516fc70 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -589,6 +589,14 @@ config CHARGER_BQ24735
>  	help
>  	  Say Y to enable support for the TI BQ24735 battery charger.
>  
> +config CHARGER_BQ2515X
> +	tristate "TI BQ2515X battery charger family"
> +	depends on I2C
> +	depends on GPIOLIB || COMPILE_TEST
> +	select REGMAP_I2C
> +	help
> +	  Say Y to enable support for the TI BQ2515X battery charger.
> +
>  config CHARGER_BQ25890
>  	tristate "TI BQ25890 battery charger driver"
>  	depends on I2C
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index 6c7da920ea83..8fcc175a7e22 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -80,6 +80,7 @@ obj-$(CONFIG_CHARGER_BQ2415X)	+= bq2415x_charger.o
>  obj-$(CONFIG_CHARGER_BQ24190)	+= bq24190_charger.o
>  obj-$(CONFIG_CHARGER_BQ24257)	+= bq24257_charger.o
>  obj-$(CONFIG_CHARGER_BQ24735)	+= bq24735-charger.o
> +obj-$(CONFIG_CHARGER_BQ2515X)	+= bq2515x_charger.o
>  obj-$(CONFIG_CHARGER_BQ25890)	+= bq25890_charger.o
>  obj-$(CONFIG_CHARGER_SMB347)	+= smb347-charger.o
>  obj-$(CONFIG_CHARGER_TPS65090)	+= tps65090-charger.o
> diff --git a/drivers/power/supply/bq2515x_charger.c b/drivers/power/supply/bq2515x_charger.c
> new file mode 100644
> index 000000000000..211a8b8e44d9
> --- /dev/null
> +++ b/drivers/power/supply/bq2515x_charger.c
> @@ -0,0 +1,743 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// BQ2515X Battery Charger Driver
> +// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_gpio.h>
> +#include <linux/power_supply.h>
> +#include <linux/regmap.h>
> +#include <linux/types.h>
> +
> +#define BQ2515X_MANUFACTURER "Texas Instruments"
> +
> +#define BQ2515X_STAT0		0x00
> +#define BQ2515X_STAT1		0x01
> +#define BQ2515X_STAT2		0x02
> +#define BQ2515X_FLAG0		0x03
> +#define BQ2515X_FLAG1		0x04
> +#define BQ2515X_FLAG2		0x05
> +#define BQ2515X_FLAG3		0x06
> +#define BQ2515X_MASK0		0x07
> +#define BQ2515X_MASK1		0x08
> +#define BQ2515X_MASK2		0x09
> +#define BQ2515X_MASK3		0x0a
> +#define BQ2515X_VBAT_CTRL	0x12
> +#define BQ2515X_ICHG_CTRL	0x13
> +#define BQ2515X_PCHRGCTRL	0x14
> +#define BQ2515X_TERMCTRL	0x15
> +#define BQ2515X_BUVLO		0x16
> +#define BQ2515X_CHARGERCTRL0	0x17
> +#define BQ2515X_CHARGERCTRL1	0x18
> +#define BQ2515X_ILIMCTRL	0x19
> +#define BQ2515X_LDOCTRL		0x1d
> +#define BQ2515X_MRCTRL		0x30
> +#define BQ2515X_ICCTRL0		0x35
> +#define BQ2515X_ICCTRL1		0x36
> +#define BQ2515X_ICCTRL2		0x37
> +#define BQ2515X_ADCCTRL0	0x40
> +#define BQ2515X_ADCCTRL1	0x41
> +#define BQ2515X_ADC_VBAT_M	0x42
> +#define BQ2515X_ADC_VBAT_L	0x43
> +#define BQ2515X_ADC_TS_M	0x44
> +#define BQ2515X_ADC_TS_L	0x45
> +#define BQ2515X_ADC_ICHG_M	0x46
> +#define BQ2515X_ADC_ICHG_L	0x47
> +#define BQ2515X_ADC_ADCIN_M	0x48
> +#define BQ2515X_ADC_ADCIN_L	0x49
> +#define BQ2515X_ADC_VIN_M	0x4a
> +#define BQ2515X_ADC_VIN_L	0x4b
> +#define BQ2515X_ADC_PMID_M	0x4c
> +#define BQ2515X_ADC_PMID_L	0x4d
> +#define BQ2515X_ADC_IIN_M	0x4e
> +#define BQ2515X_ADC_IIN_L	0x4f
> +#define BQ2515X_ADC_COMP1_M	0x52
> +#define BQ2515X_ADC_COMP1_L	0X53
> +#define BQ2515X_ADC_COMP2_M	0X54
> +#define BQ2515X_ADC_COMP2_L	0x55
> +#define BQ2515X_ADC_COMP3_M	0x56
> +#define BQ2515X_ADC_COMP3_L	0x57
> +#define BQ2515X_ADC_READ_EN	0x58
> +#define BQ2515X_TS_FASTCHGCTRL	0x61
> +#define BQ2515X_TS_COLD		0x62
> +#define BQ2515X_TS_COOL		0x63
> +#define BQ2515X_TS_WARM		0x64
> +#define BQ2515X_TS_HOT		0x65
> +#define BQ2515X_DEVICE_ID	0x6f
> +
> +#define BQ2515X_DIVISOR		65536
> +#define BQ2515X_VBAT_BASE_VOLT	3600
> +#define BQ2515X_VBAT_REG_MAX	4600
> +#define BQ2515X_VBAT_REG_MIN	3600
> +
> +#define BQ2515X_ILIM_150MA	0x2
> +#define BQ2515X_ILIM_MASK	0x7
> +#define BQ2515X_HEALTH_MASK	0xf
> +#define BQ2515X_OVERVOLT_MASK	0x80
> +
> +#define BQ2515X_HOT_FLAG	BIT(0)
> +#define BQ2515X_WARM_FLAG	BIT(1)
> +#define BQ2515X_COOL_FLAG	BIT(2)
> +#define BQ2515X_COLD_FLAG	BIT(3)
> +#define BQ2515X_SAFETY_TIMER_EXP	BIT(5)
> +
> +#define BQ2515X_VIN_GOOD	BIT(0)
> +#define BQ2515X_CHRG_DONE	BIT(5)
> +#define BQ2515X_CV_CHRG_MODE	BIT(6)
> +
> +static const int bq2515x_ilim_lvl_values[] = {
> +	50, 100, 150, 200, 300, 400, 500, 600
> +};
> +
> +/* initial field values, converted to register values */
> +struct bq2515x_init_data {
> +	u8 ichg;	/* charge current		*/
> +	u8 vreg;	/* regulation voltage		*/
> +	u8 iterm;	/* termination current		*/
> +	u8 iprechg;	/* precharge current		*/
> +	u8 sysvmin;	/* minimum system voltage limit */
> +	u8 ilim;	/* ILIM current contol		*/
> +};
> +
> +struct bq2515x_device {
> +	struct power_supply *mains;
> +	struct power_supply *battery;
> +	struct i2c_client *client;
> +	struct regmap *regmap;
> +	struct device *dev;
> +	struct mutex lock;
> +
> +	struct gpio_desc *reset_gpio;
> +	struct gpio_desc *lp_gpio;
> +	struct gpio_desc *pg_gpio;
> +	struct gpio_desc *ce_gpio;
> +
> +	char model_name[I2C_NAME_SIZE];
> +	int mains_online;
> +
> +	uint32_t voltage_min_design;
> +	uint32_t voltage_max_design;
> +	uint32_t charge_full_design;
> +
> +	struct bq2515x_init_data init_data;
> +};
> +
> +static struct reg_default bq2515x_reg_defs[] = {
> +	{BQ2515X_STAT0, 0xff},
> +	{BQ2515X_STAT1, 0x0},
> +	{BQ2515X_STAT2, 0x0},
> +	{BQ2515X_FLAG0, 0x0},
> +	{BQ2515X_FLAG1, 0x0},
> +	{BQ2515X_FLAG2, 0x0},
> +	{BQ2515X_FLAG3, 0x0},
> +	{BQ2515X_MASK0, 0x0},
> +	{BQ2515X_MASK1, 0x0},
> +	{BQ2515X_MASK2, 0x0},
> +	{BQ2515X_MASK3, 0x0},
> +};
> +
> +static bool bq2515x_is_ps_online(struct bq2515x_device *bq2515x)
> +{
> +	return bq2515x->mains_online;
> +}
> +
> +static int bq2515x_wake_up(struct bq2515x_device *bq2515x)
> +{
> +	int ret;
> +	int val;
> +
> +	/* Read the STAT register if we can read it then the device is out
> +	 * of ship mode.  If the register cannot be read then attempt to wake
> +	 * it up and enable the ADC.
> +	 */
> +	ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
> +	if (!ret)
> +		return ret;
> +
> +	/* Need to toggle LP and MR here */
> +	if (bq2515x->lp_gpio)
> +		gpiod_direction_output(bq2515x->lp_gpio, 1);
> +
> +	if (bq2515x->reset_gpio) {
> +		gpiod_direction_output(bq2515x->lp_gpio, 0);
> +		mdelay(2000);
> +		gpiod_direction_output(bq2515x->lp_gpio, 1);
> +	}
> +
> +	return regmap_write(bq2515x->regmap, BQ2515X_ADC_READ_EN, BIT(3));
> +}
> +
> +static int bq2515x_update_ps_status(struct bq2515x_device *bq2515x)
> +{
> +	bool dc = false;
> +	unsigned int val;
> +	int ret;
> +
> +	if (bq2515x->pg_gpio)
> +		val = gpiod_get_value(bq2515x->pg_gpio);
> +	else {
> +		ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	dc = val & BQ2515X_VIN_GOOD;
> +
> +	ret = bq2515x->mains_online != dc;
> +
> +	bq2515x->mains_online = dc;
> +
> +	return ret;
> +}
> +
> +static int get_const_charge_current(struct bq2515x_device *bq2515x)
> +{
> +	int ret;
> +	int intval;
> +	int iin_msb;
> +	int iin_lsb;
> +	u16 ichg_measurement;
> +	int ilim_val, ichg_multiplier;
> +
> +	if (!bq2515x_is_ps_online(bq2515x))
> +		return -ENODATA;
> +
> +	ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_IIN_M, &iin_msb);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_IIN_L, &iin_lsb);
> +	if (ret < 0)
> +		return ret;
> +
> +	ichg_measurement = (iin_msb << 8) | iin_lsb;
> +	ret = regmap_read(bq2515x->regmap, BQ2515X_ILIMCTRL, &ilim_val);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (ilim_val >= BQ2515X_ILIM_150MA)
> +		ichg_multiplier = 350;
> +	else
> +		ichg_multiplier = 750;
> +
> +	intval = (ichg_measurement * 100 / BQ2515X_DIVISOR) * ichg_multiplier;
> +	return intval / 100;
> +}
> +
> +static int get_const_charge_voltage(struct bq2515x_device *bq2515x)
> +{
> +	int ret;
> +	int intval;
> +	int vin_msb;
> +	int vin_lsb;
> +	u16 vbat_measurement;
> +
> +	if (!bq2515x_is_ps_online(bq2515x))
> +		bq2515x_wake_up(bq2515x);
> +
> +	ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_M, &vin_msb);
> +	if (ret)
> +		return ret;
> +
> +	ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_L, &vin_lsb);
> +	if (ret)
> +		return ret;
> +
> +	vbat_measurement = (vin_msb << 8) | vin_lsb;
> +	intval = ((vbat_measurement * 10000) / BQ2515X_DIVISOR) * 6;
> +	return intval / 10;
> +}
> +
> +static int bq2515x_charging_status(struct bq2515x_device *bq2515x,
> +				   union power_supply_propval *val)
> +{
> +	unsigned int status;
> +	int ret;
> +
> +	if (!bq2515x_is_ps_online(bq2515x))
> +		return 0;
> +
> +	ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &status);
> +	if (ret) {
> +		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
> +		return ret;
> +	}
> +
> +	if (status & BQ2515X_CV_CHRG_MODE && status & BQ2515X_VIN_GOOD)
> +		val->intval = POWER_SUPPLY_STATUS_CHARGING;
> +	else if (status & BQ2515X_CHRG_DONE)
> +		val->intval = POWER_SUPPLY_STATUS_FULL;
> +	else if (status & BQ2515X_VIN_GOOD)
> +		val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
> +	else
> +		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
> +
> +	return ret;
> +}
> +
> +static int bq2515x_get_batt_reg(struct bq2515x_device *bq2515x)
> +{
> +	int vbat_reg_code;
> +	int ret;
> +
> +	ret = regmap_read(bq2515x->regmap, BQ2515X_VBAT_CTRL, &vbat_reg_code);
> +	if (ret)
> +		return ret;
> +
> +	return BQ2515X_VBAT_BASE_VOLT + vbat_reg_code * 10;
> +}
> +
> +static int bq2515x_set_batt_reg(struct bq2515x_device *bq2515x, int val)
> +{
> +	int vbat_reg_code;
> +
> +	if (val > BQ2515X_VBAT_REG_MAX || val < BQ2515X_VBAT_REG_MIN)
> +		return -EINVAL;
> +
> +	vbat_reg_code = (val - BQ2515X_VBAT_BASE_VOLT) / 10;
> +
> +	return regmap_write(bq2515x->regmap, BQ2515X_VBAT_CTRL, vbat_reg_code);
> +}
> +
> +static int bq2515x_get_ilim_lvl(struct bq2515x_device *bq2515x)
> +{
> +	int ret;
> +	int val;
> +
> +	ret = regmap_read(bq2515x->regmap, BQ2515X_ILIMCTRL, &val);
> +	if (ret)
> +		return ret;
> +
> +	return bq2515x_ilim_lvl_values[val & BQ2515X_ILIM_MASK];
> +}
> +
> +static int bq2515x_set_ilim_lvl(struct bq2515x_device *bq2515x, int val)
> +{
> +	int i;
> +
> +	for (i = 0; i <= ARRAY_SIZE(bq2515x_ilim_lvl_values); i++) {
> +		if (val == bq2515x_ilim_lvl_values[i])
> +			break;
> +
> +		if (val > bq2515x_ilim_lvl_values[i - 1] &&
> +		    val < bq2515x_ilim_lvl_values[i]) {
> +			if (val - bq2515x_ilim_lvl_values[i - 1] <
> +			    bq2515x_ilim_lvl_values[i] - val) {
> +				i = i - 1;
> +				break;
> +			}
> +		}
> +	}
> +
> +	return regmap_write(bq2515x->regmap, BQ2515X_ILIMCTRL, i);
> +}
> +
> +static int bq2515x_power_supply_property_is_writeable(struct power_supply *psy,
> +					enum power_supply_property prop)
> +{
> +	switch (prop) {
> +	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> +	case POWER_SUPPLY_PROP_CHARGE_NOW:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +static int bq2515x_charger_get_health(struct bq2515x_device *bq2515x,
> +				      union power_supply_propval *val)
> +{
> +	int health;
> +	int ret;
> +	int v;
> +
> +	if (!bq2515x_is_ps_online(bq2515x))
> +		bq2515x_wake_up(bq2515x);
> +
> +	ret = regmap_read(bq2515x->regmap, BQ2515X_FLAG1, &v);
> +	if (ret)
> +		return -EIO;
> +
> +	if (v & BQ2515X_HEALTH_MASK) {
> +		switch (v & BQ2515X_HEALTH_MASK) {
> +		case BQ2515X_HOT_FLAG:
> +			health = POWER_SUPPLY_HEALTH_OVERHEAT;
> +			break;
> +		case BQ2515X_WARM_FLAG:
> +			health = POWER_SUPPLY_HEALTH_WARM;
> +			break;
> +		case BQ2515X_COOL_FLAG:
> +			health = POWER_SUPPLY_HEALTH_COOL;
> +			break;
> +		case BQ2515X_COLD_FLAG:
> +			health = POWER_SUPPLY_HEALTH_COLD;
> +			break;
> +		default:
> +			health = POWER_SUPPLY_HEALTH_UNKNOWN;
> +		}
> +	} else if (v & BQ2515X_OVERVOLT_MASK) {
> +		health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
> +	} else {
> +		health = POWER_SUPPLY_HEALTH_GOOD;
> +	}
> +
> +	ret = regmap_read(bq2515x->regmap, BQ2515X_FLAG3, &v);
> +	if (v & BQ2515X_SAFETY_TIMER_EXP)
> +		health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
> +
> +	val->intval = health;
> +
> +	return 0;
> +}
> +
> +static int bq2515x_set_charge_enable(struct bq2515x_device *bq2515x, int val)
> +{
> +	if (bq2515x->ce_gpio)
> +		gpiod_set_value(bq2515x->ce_gpio, val);
> +
> +	return 0;
> +}
> +
> +static int bq2515x_get_charge_enable(struct bq2515x_device *bq2515x)
> +{
> +	int charge_value;
> +
> +	if (bq2515x->ce_gpio)
> +		charge_value = gpiod_get_value(bq2515x->ce_gpio);
> +	else
> +		return -EINVAL;
> +
> +	return charge_value;
> +}
> +
> +static int bq2515x_mains_set_property(struct power_supply *psy,
> +		enum power_supply_property prop,
> +		const union power_supply_propval *val)
> +{
> +	struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
> +	int ret;
> +
> +	switch (prop) {
> +	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> +		ret = bq2515x_set_ilim_lvl(bq2515x, val->intval);
> +		break;
> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> +		ret = bq2515x_set_batt_reg(bq2515x, val->intval);
> +		break;
> +	case POWER_SUPPLY_PROP_CHARGE_NOW:
> +		ret = bq2515x_set_charge_enable(bq2515x, val->intval);
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return ret;
> +}
> +
> +static int bq2515x_mains_get_property(struct power_supply *psy,
> +				     enum power_supply_property prop,
> +				     union power_supply_propval *val)
> +{
> +	struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
> +	int ret;
> +
> +	switch (prop) {
> +	case POWER_SUPPLY_PROP_ONLINE:
> +		val->intval = bq2515x->mains_online;
> +		break;
> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> +		ret = get_const_charge_current(bq2515x);
> +		if (ret < 0)
> +			return ret;
> +
> +		val->intval = ret;
> +		break;
> +	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> +		ret = bq2515x_get_ilim_lvl(bq2515x);
> +		if (ret < 0)
> +			return ret;
> +
> +		val->intval = ret;
> +		break;
> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> +		ret = bq2515x_get_batt_reg(bq2515x);
> +		if (ret < 0)
> +			return ret;
> +
> +		val->intval = ret;
> +		break;
> +	case POWER_SUPPLY_PROP_MODEL_NAME:
> +		val->strval = bq2515x->model_name;
> +		ret = 0;
> +		break;
> +	case POWER_SUPPLY_PROP_MANUFACTURER:
> +		val->strval = BQ2515X_MANUFACTURER;
> +		ret = 0;
> +		break;
> +	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
> +		val->intval = BQ2515X_VBAT_REG_MAX;
> +		break;
> +	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
> +		val->intval = BQ2515X_VBAT_REG_MIN;
> +		break;
> +	case POWER_SUPPLY_PROP_CHARGE_NOW:
> +		ret = bq2515x_get_charge_enable(bq2515x);
> +		if (ret < 0)
> +			return ret;
> +
> +		val->intval = ret;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int bq2515x_battery_get_property(struct power_supply *psy,
> +				       enum power_supply_property prop,
> +				       union power_supply_propval *val)
> +{
> +	struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
> +	int ret;
> +
> +	ret = bq2515x_update_ps_status(bq2515x);
> +	if (ret < 0)
> +		return ret;
> +
> +	switch (prop) {
> +	case POWER_SUPPLY_PROP_STATUS:
> +		if (!bq2515x_is_ps_online(bq2515x)) {
> +			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
> +			break;
> +		}
> +
> +		ret = bq2515x_charging_status(bq2515x, val);
> +		break;
> +	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> +		ret = get_const_charge_voltage(bq2515x);
> +		if (ret < 0)
> +			return ret;
> +
> +		val->intval = ret;
> +		break;
> +	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
> +		val->intval = bq2515x->voltage_min_design;
> +		break;
> +	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> +		val->intval = bq2515x->voltage_max_design;
> +		break;
> +	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
> +		val->intval = bq2515x->charge_full_design;
> +		break;
> +	case POWER_SUPPLY_PROP_HEALTH:
> +		ret = bq2515x_charger_get_health(bq2515x, val);
> +		if (ret)
> +			val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static enum power_supply_property bq2515x_battery_properties[] = {
> +	POWER_SUPPLY_PROP_STATUS,
> +	POWER_SUPPLY_PROP_HEALTH,
> +	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
> +	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
> +	POWER_SUPPLY_PROP_VOLTAGE_NOW,
> +	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
> +};
> +
> +static enum power_supply_property bq2515x_charger_properties[] = {
> +	POWER_SUPPLY_PROP_ONLINE,
> +	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
> +	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
> +	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
> +	POWER_SUPPLY_PROP_VOLTAGE_MAX,
> +	POWER_SUPPLY_PROP_VOLTAGE_MIN,
> +	POWER_SUPPLY_PROP_CHARGE_NOW,
> +	POWER_SUPPLY_PROP_MODEL_NAME,
> +	POWER_SUPPLY_PROP_MANUFACTURER,
> +};
> +
> +static struct power_supply_desc bq2515x_mains_desc = {
> +	.name			= "bq2515x-mains",
> +	.type			= POWER_SUPPLY_TYPE_MAINS,
> +	.get_property		= bq2515x_mains_get_property,
> +	.set_property		= bq2515x_mains_set_property,
> +	.properties		= bq2515x_charger_properties,
> +	.num_properties		= ARRAY_SIZE(bq2515x_charger_properties),
> +	.property_is_writeable = bq2515x_power_supply_property_is_writeable,
> +
> +};
> +
> +static struct power_supply_desc bq2515x_battery_desc = {
> +	.name			= "bq2515x-battery",
> +	.type			= POWER_SUPPLY_TYPE_BATTERY,
> +	.get_property		= bq2515x_battery_get_property,
> +	.properties		= bq2515x_battery_properties,
> +	.num_properties		= ARRAY_SIZE(bq2515x_battery_properties),
> +};
> +
> +
> +static int bq2515x_power_supply_register(struct bq2515x_device *bq2515x)
> +{
> +	struct power_supply_config psy_cfg = { .drv_data = bq2515x, };
> +	int ret = -EINVAL;
> +
> +	bq2515x->mains = devm_power_supply_register(bq2515x->dev,
> +						    &bq2515x_mains_desc,
> +						    &psy_cfg);
> +	if (IS_ERR(bq2515x->mains))
> +		return ret;
> +
> +	bq2515x->battery = devm_power_supply_register(bq2515x->dev,
> +						      &bq2515x_battery_desc,
> +						      &psy_cfg);
> +	if (IS_ERR(bq2515x->battery)) {
> +		power_supply_unregister(bq2515x->mains);

you registered the mains power-supply with devm_ prefix, so it
will be removed automatically.

> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int bq2515x_hw_init(struct bq2515x_device *bq2515x)
> +{
> +	int ret = 0;
> +
> +	if (bq2515x->init_data.ichg)
> +		ret = bq2515x_set_ilim_lvl(bq2515x, bq2515x->init_data.ichg);
> +
> +	if (bq2515x->init_data.vreg)
> +		ret = bq2515x_set_batt_reg(bq2515x, bq2515x->init_data.vreg);

This throws away potential error code from bq2515x_set_ilim_lvl().

> +	return ret;
> +}
> +
> +static int bq2515x_read_properties(struct bq2515x_device *bq2515x)
> +{
> +	int ret;
> +
> +	ret = device_property_read_u8(bq2515x->dev, "ti,charge-current",
> +				      &bq2515x->init_data.ichg);
> +	if (ret)
> +		goto fail;
> +
> +	ret = device_property_read_u8(bq2515x->dev,
> +				      "ti,battery-regulation-voltage",
> +				      &bq2515x->init_data.vreg);
> +	if (ret)
> +		goto fail;

The above properties are marked as optional in the DT bindings
document.

> +	bq2515x->pg_gpio = devm_gpiod_get_optional(bq2515x->dev,
> +						   "pg", GPIOD_IN);
> +	if (IS_ERR(bq2515x->pg_gpio))
> +		dev_info(bq2515x->dev, "PG GPIO not defined");
> +
> +	bq2515x->reset_gpio = devm_gpiod_get_optional(bq2515x->dev,
> +						   "reset", GPIOD_OUT_LOW);
> +	if (IS_ERR(bq2515x->reset_gpio))
> +		dev_info(bq2515x->dev, "reset GPIO not defined");
> +
> +	bq2515x->lp_gpio = devm_gpiod_get_optional(bq2515x->dev, "low-power",
> +						   GPIOD_OUT_LOW);
> +	if (IS_ERR(bq2515x->lp_gpio))
> +		dev_info(bq2515x->dev, "LP GPIO not defined");
> +
> +	bq2515x->ce_gpio = devm_gpiod_get_optional(bq2515x->dev,
> +						   "charge-enable",
> +						   GPIOD_OUT_HIGH);
> +	if (IS_ERR(bq2515x->ce_gpio))
> +		dev_info(bq2515x->dev, "Charge enable GPIO not defined");

The GPIO errors should not be ignored, especially since you
might get a -EPROBE_DEFER.

> +fail:
> +	return ret;
> +}
> +
> +static const struct regmap_config bq2515x_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +
> +	.max_register = BQ2515X_DEVICE_ID,
> +	.reg_defaults     = bq2515x_reg_defs,
> +	.num_reg_defaults = ARRAY_SIZE(bq2515x_reg_defs),
> +	.cache_type	  = REGCACHE_RBTREE,
> +};
> +
> +static int bq2515x_probe(struct i2c_client *client,
> +			 const struct i2c_device_id *id)
> +{
> +	struct device *dev = &client->dev;
> +	struct bq2515x_device *bq;
> +	int ret;
> +
> +	bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
> +	if (!bq)
> +		return -ENOMEM;
> +
> +	bq->client = client;
> +	bq->dev = dev;
> +
> +	mutex_init(&bq->lock);
> +
> +	bq->regmap = devm_regmap_init_i2c(client, &bq2515x_regmap_config);
> +	if (IS_ERR(bq->regmap)) {
> +		dev_err(dev, "failed to allocate register map\n");
> +		return PTR_ERR(bq->regmap);
> +	}
> +
> +	strncpy(bq->model_name, id->name, I2C_NAME_SIZE);
> +
> +	i2c_set_clientdata(client, bq);
> +
> +	ret = bq2515x_read_properties(bq);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to register power supply\n");
> +		return ret;
> +	}
> +
> +	ret = bq2515x_hw_init(bq);
> +	if (ret < 0) {
> +		dev_err(dev, "Cannot initialize the chip.\n");
> +		return ret;
> +	}
> +
> +	return bq2515x_power_supply_register(bq);
> +}
> +
> +static const struct i2c_device_id bq2515x_i2c_ids[] = {
> +	{ "bq25150", 0 },
> +	{ "bq25155", 1 },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(i2c, bq2515x_i2c_ids);
> +
> +static const struct of_device_id bq2515x_of_match[] = {
> +	{ .compatible = "ti,bq25150", },
> +	{ .compatible = "ti,bq25155", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, bq2515x_of_match);
> +
> +static struct i2c_driver bq2515x_driver = {
> +	.driver = {
> +		.name = "bq2515x-charger",
> +		.of_match_table = of_match_ptr(bq2515x_of_match),

You need to do one of those:

 * remove of_match_ptr and specify bq2515x_of_match directly
 * put the OF table in #ifdef CONFIG_OF
 * mark the OF table as __maybe_unused

> +	},
> +	.probe = bq2515x_probe,
> +	.id_table = bq2515x_i2c_ids,
> +};
> +module_i2c_driver(bq2515x_driver);
> +
> +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
> +MODULE_DESCRIPTION("BQ2515X charger driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.22.0.214.g8dca754b1e
>