All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2 0/3] phy: cadence: j721e-wiz: Add Type-C plug flip support
@ 2019-10-23  8:49 Roger Quadros
  2019-10-23  8:49 ` [PATCH v2 1/3] phy: cadence: Sierra: add phy_reset hook Roger Quadros
                   ` (3 more replies)
  0 siblings, 4 replies; 6+ messages in thread
From: Roger Quadros @ 2019-10-23  8:49 UTC (permalink / raw)
  To: kishon
  Cc: aniljoy, adouglas, nsekhar, jsarha, linux-kernel, devicetree,
	Roger Quadros

Hi,

On J721e platform, the 2 lanes of SERDES PHY are used to achieve
USB Type-C plug flip support without any additional MUX component
by using a lane swap feature.

However, the driver needs to know the Type-C plug orientation before
it can decide whether to swap the lanes or not. This is achieved via a
GPIO named DIR.

Another constraint is that the lane swap must happen only when the PHY
is in inactive state. This is achieved by sampling the GPIO and
programming the lane swap before bringing the PHY out of reset.

This series adds support to read the GPIO and accordingly program
the Lane swap for Type-C plug flip support.

Series must be applied on top of
https://lkml.org/lkml/2019/10/16/517

cheers,
-roger

Changelog:
v2
- revise commit log of patch 1
- use regmap_field in patch 3

Roger Quadros (3):
  phy: cadence: Sierra: add phy_reset hook
  dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO
  phy: ti: j721e-wiz: Manage typec-gpio-dir

 .../bindings/phy/ti,phy-j721e-wiz.txt         |  9 ++++
 drivers/phy/cadence/phy-cadence-sierra.c      | 10 ++++
 drivers/phy/ti/phy-j721e-wiz.c                | 48 +++++++++++++++++++
 3 files changed, 67 insertions(+)

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v2 1/3] phy: cadence: Sierra: add phy_reset hook
  2019-10-23  8:49 [PATCH v2 0/3] phy: cadence: j721e-wiz: Add Type-C plug flip support Roger Quadros
@ 2019-10-23  8:49 ` Roger Quadros
  2019-10-23  8:49 ` [PATCH v2 2/3] dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO Roger Quadros
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 6+ messages in thread
From: Roger Quadros @ 2019-10-23  8:49 UTC (permalink / raw)
  To: kishon
  Cc: aniljoy, adouglas, nsekhar, jsarha, linux-kernel, devicetree,
	Roger Quadros

Some platforms e.g. J721e need lane swap register
to be programmed before reset is deasserted.
This patch ensures that we propagate the phy_reset
back to the reset controller driver.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 drivers/phy/cadence/phy-cadence-sierra.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c
index affede8c4368..e6d27bdec22a 100644
--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
@@ -339,10 +339,20 @@ static int cdns_sierra_phy_off(struct phy *gphy)
 	return reset_control_assert(ins->lnk_rst);
 }
 
+static int cdns_sierra_phy_reset(struct phy *gphy)
+{
+	struct cdns_sierra_phy *sp = dev_get_drvdata(gphy->dev.parent);
+
+	reset_control_assert(sp->phy_rst);
+	reset_control_deassert(sp->phy_rst);
+	return 0;
+};
+
 static const struct phy_ops ops = {
 	.init		= cdns_sierra_phy_init,
 	.power_on	= cdns_sierra_phy_on,
 	.power_off	= cdns_sierra_phy_off,
+	.reset		= cdns_sierra_phy_reset,
 	.owner		= THIS_MODULE,
 };
 
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v2 2/3] dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO
  2019-10-23  8:49 [PATCH v2 0/3] phy: cadence: j721e-wiz: Add Type-C plug flip support Roger Quadros
  2019-10-23  8:49 ` [PATCH v2 1/3] phy: cadence: Sierra: add phy_reset hook Roger Quadros
@ 2019-10-23  8:49 ` Roger Quadros
  2019-10-23 13:00   ` Kishon Vijay Abraham I
  2019-10-23  8:49 ` [PATCH v2 3/3] phy: ti: j721e-wiz: Manage typec-gpio-dir Roger Quadros
  2019-10-23 12:32 ` [PATCH v2 0/3] phy: cadence: j721e-wiz: Add Type-C plug flip support Jyri Sarha
  3 siblings, 1 reply; 6+ messages in thread
From: Roger Quadros @ 2019-10-23  8:49 UTC (permalink / raw)
  To: kishon
  Cc: aniljoy, adouglas, nsekhar, jsarha, linux-kernel, devicetree,
	Roger Quadros

This is an optional GPIO, if specified will be used to
swap lane 0 and lane 1 based on GPIO status. This is required
to achieve plug flip support for USB Type-C.

Type-C companions typically need some time after the cable is
plugged before and before they reflect the correct status of
Type-C plug orientation on the DIR line.

Type-C Spec specifies CC attachment debounce time (tCCDebounce)
of 100 ms (min) to 200 ms (max).

Allow the DT node to specify the time (in ms) that we need
to wait before sampling the DIR line.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 .../devicetree/bindings/phy/ti,phy-j721e-wiz.txt         | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.txt b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.txt
index 19b4c3e855d6..253535a8819f 100644
--- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.txt
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.txt
@@ -24,6 +24,15 @@ Optional properties:
 assigned-clocks and assigned-clock-parents: As documented in the generic
 clock bindings in Documentation/devicetree/bindings/clock/clock-bindings.txt
 
+ - typec-dir-gpios: GPIO to signal Type-C cable orientation for lane swap.
+     If GPIO is active, lane 0 and lane 1 of SERDES will be swapped to
+     achieve the funtionality of an exernal type-C plug flip mux.
+
+ - typec-dir-debounce: Number of milliseconds to wait before sampling
+     typec-dir-gpio. If not specified, the GPIO will be sampled ASAP.
+     Type-C spec states minimum CC pin debounce of 100 ms and maximum
+     of 200 ms.
+
 Required subnodes:
  - Clock Subnode: WIZ node should have '3' subnodes for each of the clock
      selects it supports. The clock subnodes should have the following names
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v2 3/3] phy: ti: j721e-wiz: Manage typec-gpio-dir
  2019-10-23  8:49 [PATCH v2 0/3] phy: cadence: j721e-wiz: Add Type-C plug flip support Roger Quadros
  2019-10-23  8:49 ` [PATCH v2 1/3] phy: cadence: Sierra: add phy_reset hook Roger Quadros
  2019-10-23  8:49 ` [PATCH v2 2/3] dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO Roger Quadros
@ 2019-10-23  8:49 ` Roger Quadros
  2019-10-23 12:32 ` [PATCH v2 0/3] phy: cadence: j721e-wiz: Add Type-C plug flip support Jyri Sarha
  3 siblings, 0 replies; 6+ messages in thread
From: Roger Quadros @ 2019-10-23  8:49 UTC (permalink / raw)
  To: kishon
  Cc: aniljoy, adouglas, nsekhar, jsarha, linux-kernel, devicetree,
	Roger Quadros

Based on this GPIO state we need to configure LN10
bit to swap lane0 and lane1 if required (flipped connector).

Type-C companions typically need some time after the cable is
plugged before and before they reflect the correct status of
Type-C plug orientation on the DIR line.

Type-C Spec specifies CC attachment debounce time (tCCDebounce)
of 100 ms (min) to 200 ms (max).

Use the DT property to figure out if we need to add delay
or not before sampling the Type-C DIR line.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 drivers/phy/ti/phy-j721e-wiz.c | 48 ++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c
index 2a95da843e9f..02b949406b7b 100644
--- a/drivers/phy/ti/phy-j721e-wiz.c
+++ b/drivers/phy/ti/phy-j721e-wiz.c
@@ -9,6 +9,8 @@
 #include <dt-bindings/phy/phy.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/mux/consumer.h>
@@ -22,6 +24,7 @@
 #define WIZ_SERDES_CTRL		0x404
 #define WIZ_SERDES_TOP_CTRL	0x408
 #define WIZ_SERDES_RST		0x40c
+#define WIZ_SERDES_TYPEC	0x410
 #define WIZ_LANECTL(n)		(0x480 + (0x40 * (n)))
 
 #define WIZ_MAX_LANES		4
@@ -29,6 +32,8 @@
 #define WIZ_DIV_NUM_CLOCKS_16G	2
 #define WIZ_DIV_NUM_CLOCKS_10G	1
 
+#define WIZ_SERDES_TYPEC_LN10_SWAP	BIT(30)
+
 enum wiz_lane_standard_mode {
 	LANE_MODE_GEN1,
 	LANE_MODE_GEN2,
@@ -94,6 +99,9 @@ static const struct reg_field p_standard_mode[WIZ_MAX_LANES] = {
 	REG_FIELD(WIZ_LANECTL(3), 24, 25),
 };
 
+static const struct reg_field typec_ln10_swap =
+					REG_FIELD(WIZ_SERDES_TYPEC, 30, 30);
+
 struct wiz_clk_mux {
 	struct clk_hw		hw;
 	struct regmap_field	*field;
@@ -201,11 +209,14 @@ struct wiz {
 	struct regmap_field	*pma_cmn_refclk_mode;
 	struct regmap_field	*pma_cmn_refclk_dig_div;
 	struct regmap_field	*pma_cmn_refclk1_dig_div;
+	struct regmap_field	*typec_ln10_swap;
 
 	struct device		*dev;
 	u32			num_lanes;
 	struct platform_device	*serdes_pdev;
 	struct reset_controller_dev wiz_phy_reset_dev;
+	struct gpio_desc	*gpio_typec_dir;
+	int			typec_dir_delay;
 };
 
 static int wiz_reset(struct wiz *wiz)
@@ -404,6 +415,13 @@ static int wiz_regfield_init(struct wiz *wiz)
 		}
 	}
 
+	wiz->typec_ln10_swap = devm_regmap_field_alloc(dev, regmap,
+						       typec_ln10_swap);
+	if (IS_ERR(wiz->typec_ln10_swap)) {
+		dev_err(dev, "LN10_SWAP reg field init failed\n");
+		return PTR_ERR(wiz->typec_ln10_swap);
+	}
+
 	return 0;
 }
 
@@ -703,6 +721,17 @@ static int wiz_phy_reset_deassert(struct reset_controller_dev *rcdev,
 	struct wiz *wiz = dev_get_drvdata(dev);
 	int ret;
 
+	/* if typec-dir gpio was specified, set LN10 SWAP bit based on that */
+	if (id == 0 && wiz->gpio_typec_dir) {
+		if (wiz->typec_dir_delay)
+			msleep_interruptible(wiz->typec_dir_delay);
+
+		if (gpiod_get_value_cansleep(wiz->gpio_typec_dir))
+			regmap_field_write(wiz->typec_ln10_swap, 1);
+		else
+			regmap_field_write(wiz->typec_ln10_swap, 0);
+	}
+
 	if (id == 0) {
 		ret = regmap_field_write(wiz->phy_reset_n, true);
 		return ret;
@@ -789,6 +818,25 @@ static int wiz_probe(struct platform_device *pdev)
 		goto err_addr_to_resource;
 	}
 
+	wiz->gpio_typec_dir = devm_gpiod_get_optional(dev, "typec-dir",
+						      GPIOD_IN);
+	if (IS_ERR(wiz->gpio_typec_dir)) {
+		ret = PTR_ERR(wiz->gpio_typec_dir);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to request typec-dir gpio: %d\n",
+				ret);
+		goto err_addr_to_resource;
+	}
+
+	if (wiz->gpio_typec_dir) {
+		ret = of_property_read_u32(node, "typec-dir-debounce",
+					   &wiz->typec_dir_delay);
+		if (ret && ret != -EINVAL) {
+			dev_err(dev, "Invalid typec-dir-debounce property\n");
+			goto err_addr_to_resource;
+		}
+	}
+
 	wiz->dev = dev;
 	wiz->regmap = regmap;
 	wiz->num_lanes = num_lanes;
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH v2 0/3] phy: cadence: j721e-wiz: Add Type-C plug flip support
  2019-10-23  8:49 [PATCH v2 0/3] phy: cadence: j721e-wiz: Add Type-C plug flip support Roger Quadros
                   ` (2 preceding siblings ...)
  2019-10-23  8:49 ` [PATCH v2 3/3] phy: ti: j721e-wiz: Manage typec-gpio-dir Roger Quadros
@ 2019-10-23 12:32 ` Jyri Sarha
  3 siblings, 0 replies; 6+ messages in thread
From: Jyri Sarha @ 2019-10-23 12:32 UTC (permalink / raw)
  To: Roger Quadros, kishon
  Cc: aniljoy, adouglas, nsekhar, linux-kernel, devicetree

On 23/10/2019 11:49, Roger Quadros wrote:
> Hi,
> 
> On J721e platform, the 2 lanes of SERDES PHY are used to achieve
> USB Type-C plug flip support without any additional MUX component
> by using a lane swap feature.
> 
> However, the driver needs to know the Type-C plug orientation before
> it can decide whether to swap the lanes or not. This is achieved via a
> GPIO named DIR.
> 
> Another constraint is that the lane swap must happen only when the PHY
> is in inactive state. This is achieved by sampling the GPIO and
> programming the lane swap before bringing the PHY out of reset.
> 
> This series adds support to read the GPIO and accordingly program
> the Lane swap for Type-C plug flip support.
> 
> Series must be applied on top of
> https://lkml.org/lkml/2019/10/16/517
> 
> cheers,
> -roger
> 
> Changelog:
> v2
> - revise commit log of patch 1
> - use regmap_field in patch 3
> 

Reviewed-by: Jyri Sarha <jsarha@ti.com>

For the whole series.

> Roger Quadros (3):
>   phy: cadence: Sierra: add phy_reset hook
>   dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO
>   phy: ti: j721e-wiz: Manage typec-gpio-dir
> 
>  .../bindings/phy/ti,phy-j721e-wiz.txt         |  9 ++++
>  drivers/phy/cadence/phy-cadence-sierra.c      | 10 ++++
>  drivers/phy/ti/phy-j721e-wiz.c                | 48 +++++++++++++++++++
>  3 files changed, 67 insertions(+)
> 


-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v2 2/3] dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO
  2019-10-23  8:49 ` [PATCH v2 2/3] dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO Roger Quadros
@ 2019-10-23 13:00   ` Kishon Vijay Abraham I
  0 siblings, 0 replies; 6+ messages in thread
From: Kishon Vijay Abraham I @ 2019-10-23 13:00 UTC (permalink / raw)
  To: Roger Quadros
  Cc: aniljoy, adouglas, nsekhar, jsarha, linux-kernel, devicetree

Roger,

On 23/10/19 2:19 PM, Roger Quadros wrote:
> This is an optional GPIO, if specified will be used to
> swap lane 0 and lane 1 based on GPIO status. This is required
> to achieve plug flip support for USB Type-C.
> 
> Type-C companions typically need some time after the cable is
> plugged before and before they reflect the correct status of
> Type-C plug orientation on the DIR line.
> 
> Type-C Spec specifies CC attachment debounce time (tCCDebounce)
> of 100 ms (min) to 200 ms (max).
> 
> Allow the DT node to specify the time (in ms) that we need
> to wait before sampling the DIR line.
> 
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
> ---
>  .../devicetree/bindings/phy/ti,phy-j721e-wiz.txt         | 9 +++++++++

I've posted new version to change the binding document to YAML format. Can you
make the changes on top of that series?

Thanks
Kishon

>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.txt b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.txt
> index 19b4c3e855d6..253535a8819f 100644
> --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.txt
> +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.txt
> @@ -24,6 +24,15 @@ Optional properties:
>  assigned-clocks and assigned-clock-parents: As documented in the generic
>  clock bindings in Documentation/devicetree/bindings/clock/clock-bindings.txt
>  
> + - typec-dir-gpios: GPIO to signal Type-C cable orientation for lane swap.
> +     If GPIO is active, lane 0 and lane 1 of SERDES will be swapped to
> +     achieve the funtionality of an exernal type-C plug flip mux.
> +
> + - typec-dir-debounce: Number of milliseconds to wait before sampling
> +     typec-dir-gpio. If not specified, the GPIO will be sampled ASAP.
> +     Type-C spec states minimum CC pin debounce of 100 ms and maximum
> +     of 200 ms.
> +
>  Required subnodes:
>   - Clock Subnode: WIZ node should have '3' subnodes for each of the clock
>       selects it supports. The clock subnodes should have the following names
> 

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2019-10-23 13:01 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-23  8:49 [PATCH v2 0/3] phy: cadence: j721e-wiz: Add Type-C plug flip support Roger Quadros
2019-10-23  8:49 ` [PATCH v2 1/3] phy: cadence: Sierra: add phy_reset hook Roger Quadros
2019-10-23  8:49 ` [PATCH v2 2/3] dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO Roger Quadros
2019-10-23 13:00   ` Kishon Vijay Abraham I
2019-10-23  8:49 ` [PATCH v2 3/3] phy: ti: j721e-wiz: Manage typec-gpio-dir Roger Quadros
2019-10-23 12:32 ` [PATCH v2 0/3] phy: cadence: j721e-wiz: Add Type-C plug flip support Jyri Sarha

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.