All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: agross@kernel.org, robh+dt@kernel.org, bjorn.andersson@linaro.org
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, mka@chromium.org,
	Kiran Gunda <kgunda@codeaurora.org>,
	Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v3 08/11] arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals
Date: Wed, 23 Oct 2019 14:32:16 +0530	[thread overview]
Message-ID: <20191023090219.15603-9-rnayak@codeaurora.org> (raw)
In-Reply-To: <20191023090219.15603-1-rnayak@codeaurora.org>

From: Kiran Gunda <kgunda@codeaurora.org>

Add PM6150/PM6150L peripherals such as PON, GPIOs, ADC and other
PMIC infra modules.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/pm6150.dtsi    | 85 +++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/pm6150l.dtsi   | 47 ++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180-idp.dts |  2 +
 3 files changed, 134 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm6150.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pm6150l.dtsi

diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
new file mode 100644
index 000000000000..20eb928e5ce3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+&spmi_bus {
+	pm6150_lsid0: pmic@0 {
+		compatible = "qcom,pm6150", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6150_pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+		};
+
+		pm6150_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm6150_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			adc-chan@ADC5_DIE_TEMP {
+				reg = <ADC5_DIE_TEMP>;
+				label = "die_temp";
+			};
+		};
+
+		pm6150_gpio: gpios@c000 {
+			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000 0xa00>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				     <0 0xc1 0 IRQ_TYPE_NONE>,
+				     <0 0xc2 0 IRQ_TYPE_NONE>,
+				     <0 0xc3 0 IRQ_TYPE_NONE>,
+				     <0 0xc4 0 IRQ_TYPE_NONE>,
+				     <0 0xc5 0 IRQ_TYPE_NONE>,
+				     <0 0xc6 0 IRQ_TYPE_NONE>,
+				     <0 0xc7 0 IRQ_TYPE_NONE>,
+				     <0 0xc8 0 IRQ_TYPE_NONE>,
+				     <0 0xc9 0 IRQ_TYPE_NONE>;
+
+			interrupt-names = "pm6150_gpio1", "pm6150_gpio2",
+					"pm6150_gpio3", "pm6150_gpio4",
+					"pm6150_gpio5", "pm6150_gpio6",
+					"pm6150_gpio7", "pm6150_gpio8",
+					"pm6150_gpio9", "pm6150_gpio10";
+		};
+	};
+
+	pm6150_lsid1: pmic@1 {
+		compatible = "qcom,pm6150", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
new file mode 100644
index 000000000000..b17bb1af9367
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pm6150l_lsid4: pmic@4 {
+		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6150l_gpios: gpios@c000 {
+			compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
+			reg = <0xc000 0xc00>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <4 0xc0 0 IRQ_TYPE_NONE>,
+				     <4 0xc1 0 IRQ_TYPE_NONE>,
+				     <4 0xc2 0 IRQ_TYPE_NONE>,
+				     <4 0xc3 0 IRQ_TYPE_NONE>,
+				     <4 0xc4 0 IRQ_TYPE_NONE>,
+				     <4 0xc5 0 IRQ_TYPE_NONE>,
+				     <4 0xc6 0 IRQ_TYPE_NONE>,
+				     <4 0xc7 0 IRQ_TYPE_NONE>,
+				     <4 0xc8 0 IRQ_TYPE_NONE>,
+				     <4 0xc9 0 IRQ_TYPE_NONE>,
+				     <4 0xca 0 IRQ_TYPE_NONE>,
+				     <4 0xcb 0 IRQ_TYPE_NONE>;
+
+			interrupt-names = "pm6150l_gpio1", "pm6150l_gpio2",
+					"pm6150l_gpio3", "pm6150l_gpio4",
+					"pm6150l_gpio5", "pm6150l_gpio6",
+					"pm6150l_gpio7", "pm6150l_gpio8",
+					"pm6150l_gpio9", "pm6150l_gpio10",
+					"pm6150l_gpio11", "pm6150l_gpio12";
+		};
+	};
+
+	pm6150l_lsid5: pmic@5 {
+		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 5ee6eb3e2b99..be42ae9d2d9d 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -8,6 +8,8 @@
 /dts-v1/;
 
 #include "sc7180.dtsi"
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SC7180 IDP";
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


  parent reply	other threads:[~2019-10-23  9:03 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-23  9:02 [PATCH v3 00/11] Add device tree support for sc7180 Rajendra Nayak
2019-10-23  9:02 ` [PATCH v3 01/11] dt-bindings: qcom: Add SC7180 bindings Rajendra Nayak
2019-10-25 19:50   ` Rob Herring
2019-11-04  6:03     ` Rajendra Nayak
2019-10-23  9:02 ` [PATCH v3 02/11] arm64: dts: sc7180: Add minimal dts/dtsi files for SC7180 soc Rajendra Nayak
2019-10-29 16:49   ` Stephen Boyd
2019-11-04  6:15     ` Rajendra Nayak
2019-10-30  5:19   ` kbuild test robot
2019-10-23  9:02 ` [PATCH v3 03/11] dt-bindings: arm-smmu: update binding for qcom sc7180 SoC Rajendra Nayak
2019-10-25 19:51   ` Rob Herring
2019-11-04  6:04     ` Rajendra Nayak
2019-10-29 16:42   ` Stephen Boyd
2019-11-04  6:11     ` Rajendra Nayak
2019-10-23  9:02 ` [PATCH v3 04/11] arm64: dts: sc7180: Add device node for apps_smmu Rajendra Nayak
2019-10-23  9:02 ` [PATCH v3 05/11] arm64: dts: qcom: sc7180: Add cmd_db reserved area Rajendra Nayak
2019-10-23 12:16   ` Sibi Sankar
2019-10-24  2:30     ` Rajendra Nayak
2019-10-23  9:02 ` [PATCH v3 06/11] arm64: dts: qcom: sc7180: Add rpmh-rsc node Rajendra Nayak
2019-10-23  9:02 ` [PATCH v3 07/11] arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device Rajendra Nayak
2019-10-29 16:41   ` Stephen Boyd
2019-10-30  6:06     ` kgunda
2019-10-30 14:37       ` Stephen Boyd
2019-11-04  6:10         ` Rajendra Nayak
2019-10-23  9:02 ` Rajendra Nayak [this message]
2019-10-29 16:38   ` [PATCH v3 08/11] arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals Stephen Boyd
2019-10-30  7:06     ` kgunda
2019-10-30 14:37       ` Stephen Boyd
2019-10-23  9:02 ` [PATCH v3 09/11] arm64: dts: qcom: sc7180-idp: Add RPMh regulators Rajendra Nayak
2019-10-23  9:02 ` [PATCH v3 10/11] arm64: dts: qcom: SC7180: Add node for rpmhcc clock driver Rajendra Nayak
2019-10-23  9:02 ` [PATCH v3 11/11] arm64: dts: qcom: sc7180: Add pdc interrupt controller Rajendra Nayak
2019-10-25 19:47   ` Matthias Kaehlcke
2019-11-04  6:03     ` Rajendra Nayak
2019-10-29 16:50   ` Stephen Boyd
2019-10-30 19:50     ` Matthias Kaehlcke
2019-11-04  6:17       ` Rajendra Nayak
2019-11-04  6:33         ` Bjorn Andersson
2019-11-04  6:56           ` Rajendra Nayak
2019-11-04  7:10             ` Bjorn Andersson
2019-11-05  0:34               ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191023090219.15603-9-rnayak@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kgunda@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.