[PATCH 1/3] ARM: dts: add DTS for NetCAN Plus devices

[PATCH 1/3] ARM: dts: add DTS for NetCAN Plus devices

[yegorslists]

From: Yegor Yefremov <yegorslists@googlemail.com>

This DTS file covers both NetCAN Plus 110 and 120 WLAN models.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
---
 arch/arm/boot/dts/Makefile                   |  1 +
 arch/arm/boot/dts/am335x-netcan-plus-1xx.dts | 87 ++++++++++++++++++++
 2 files changed, 88 insertions(+)
 create mode 100644 arch/arm/boot/dts/am335x-netcan-plus-1xx.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b21b3a64641a..a92576e17133 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -753,6 +753,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-moxa-uc-2101.dtb \
 	am335x-moxa-uc-8100-me-t.dtb \
 	am335x-nano.dtb \
+	am335x-netcan-plus-1xx.dtb \
 	am335x-pdu001.dtb \
 	am335x-pepper.dtb \
 	am335x-phycore-rdk.dtb \
diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
new file mode 100644
index 000000000000..1e4dbc85c120
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+	model = "NetCAN";
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "can_data";
+			linux,default-trigger = "netdev";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@2 {
+			label = "can_error";
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* CAN Data LED */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* CAN Error LED */
+		>;
+	};
+
+	dcan1_pins: pinmux_dcan1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)	/* CAN TX */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)	/* CAN RX */
+		>;
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+	phy-handle = <&phy0>;
+};
+
+&cpsw_emac1 {
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+	phy-handle = <&phy1>;
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+
+	status = "okay";
+};
-- 
2.17.0

[PATCH 2/3] ARM: dts: add DTS for NetCom Plus 1xx and 2xx device series

[yegorslists]

From: Yegor Yefremov <yegorslists@googlemail.com>

This DTS file covers all one and two port NetCom Plus devices.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
---
 arch/arm/boot/dts/Makefile                   |  1 +
 arch/arm/boot/dts/am335x-netcom-plus-2xx.dts | 95 ++++++++++++++++++++
 2 files changed, 96 insertions(+)
 create mode 100644 arch/arm/boot/dts/am335x-netcom-plus-2xx.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a92576e17133..05dae516930c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -754,6 +754,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-moxa-uc-8100-me-t.dtb \
 	am335x-nano.dtb \
 	am335x-netcan-plus-1xx.dtb \
+	am335x-netcom-plus-2xx.dtb \
 	am335x-pdu001.dtb \
 	am335x-pepper.dtb \
 	am335x-phycore-rdk.dtb \
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
new file mode 100644
index 000000000000..9a6cd8ef821f
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+	model = "NetCom Plus";
+};
+
+&am33xx_pinmux {
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)			/* RX */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)			/* TX */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* CTS */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* RTS */
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)		/* DTR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DSR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DCD */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)		/* RX */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      		/* TX */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* CTS */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* RTS */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* DTR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DSR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DCD */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
+		>;
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+	phy-handle = <&phy0>;
+};
+
+&cpsw_emac1 {
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+	phy-handle = <&phy1>;
+};
-- 
2.17.0

[PATCH 3/3] ARM: dts: add DTS for NetCom Plus 4xx and 8xx device series

[yegorslists]

From: Yegor Yefremov <yegorslists@googlemail.com>

This DTS file covers all four and eight port NetCom Plus devices.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
---
 arch/arm/boot/dts/Makefile                   |   1 +
 arch/arm/boot/dts/am335x-netcom-plus-8xx.dts | 115 +++++++++++++++++++
 2 files changed, 116 insertions(+)
 create mode 100644 arch/arm/boot/dts/am335x-netcom-plus-8xx.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 05dae516930c..5b0232c45a97 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -755,6 +755,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-nano.dtb \
 	am335x-netcan-plus-1xx.dtb \
 	am335x-netcom-plus-2xx.dtb \
+	am335x-netcom-plus-8xx.dtb \
 	am335x-pdu001.dtb \
 	am335x-pepper.dtb \
 	am335x-phycore-rdk.dtb \
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
new file mode 100644
index 000000000000..2298563f7334
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+
+/ {
+	model = "NetCom Plus";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dip_switches>;
+
+	dip_switches: pinmux_dip_switches {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	tca6416_pins: pinmux_tca6416_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
+		>;
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&i2c1 {
+	tca6416a: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6416_pins>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tca6416b: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	tca6416c: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+	phy-handle = <&phy0>;
+};
+
+&cpsw_emac1 {
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+	phy-handle = <&phy1>;
+};
-- 
2.17.0

Re: [PATCH 1/3] ARM: dts: add DTS for NetCAN Plus devices

[Tony Lindgren]

* yegorslists@googlemail.com <yegorslists@googlemail.com> [191022 00:22]:
> From: Yegor Yefremov <yegorslists@googlemail.com>
> 
> This DTS file covers both NetCAN Plus 110 and 120 WLAN models.

Thanks applying all three into omap-for-v5.5/dt.

Tony