All of lore.kernel.org
 help / color / mirror / Atom feed
From: <pbhagavatula@marvell.com>
To: <ferruh.yigit@intel.com>, <arybchenko@solarflare.com>,
	<jerinj@marvell.com>, John McNamara <john.mcnamara@intel.com>,
	"Marko Kovacevic" <marko.kovacevic@intel.com>,
	Thomas Monjalon <thomas@monjalon.net>,
	Adrien Mazarguil <adrien.mazarguil@6wind.com>
Cc: <dev@dpdk.org>, Pavan Nikhilesh <pbhagavatula@marvell.com>
Subject: [dpdk-dev] [PATCH 1/2] ethdev: add flow action type update as an offload
Date: Fri, 25 Oct 2019 20:51:40 +0530	[thread overview]
Message-ID: <20191025152142.12887-1-pbhagavatula@marvell.com> (raw)

From: Pavan Nikhilesh <pbhagavatula@marvell.com>

Add new Rx offload flag `DEV_RX_OFFLOAD_FLOW_MARK` that can be used to
enable/disable PMDs write to `rte_mbuf::hash::fdir::hi` and
`rte_mbuf::ol_flags` when flow actions `RTE_FLOW_ACTION_MARK` and
`RTE_FLOW_ACTION_FLAG` are enabled.

PMDs notify the validity of `rte_mbuf::hash:fdir::hi` to the applcation
by enabling `PKT_RX_FDIR_ID` flag in `rte_mbuf::ol_flags`.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
 doc/guides/nics/features.rst           | 12 ++++++++++++
 doc/guides/rel_notes/release_19_11.rst |  9 +++++++++
 lib/librte_ethdev/rte_ethdev.c         |  1 +
 lib/librte_ethdev/rte_ethdev.h         |  1 +
 lib/librte_ethdev/rte_flow.h           |  6 ++++--
 5 files changed, 27 insertions(+), 2 deletions(-)

diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
index d96696801..0d8d08c18 100644
--- a/doc/guides/nics/features.rst
+++ b/doc/guides/nics/features.rst
@@ -588,6 +588,18 @@ Supports packet type parsing and returns a list of supported types.
 * **[related]    API**: ``rte_eth_dev_get_supported_ptypes()``.
 
 
+.. _nic_features_flow_flag_mark:
+
+Flow flag/mark update
+---------------------
+
+Supports flow action type update to ``mbuf.ol_flags`` and ``mbuf.hash.fdir.hi``.
+
+* **[uses]     rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_FLOW_MARK``.
+* **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_FDIR``, ``mbuf.ol_flags:PKT_RX_FDIR_ID;``,
+  ``mbuf.hash.fdir.hi``
+
+
 .. _nic_features_timesync:
 
 Timesync
diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
index faf69b0d9..8593fea0e 100644
--- a/doc/guides/rel_notes/release_19_11.rst
+++ b/doc/guides/rel_notes/release_19_11.rst
@@ -185,6 +185,15 @@ New Features
   * Added a console command to testpmd app, ``show port (port_id) ptypes`` which
     gives ability to print port supported ptypes in different protocol layers.
 
+* **Added Rx offload flag to enable or disable flow action type update**
+
+  *  Add new Rx offload flag `DEV_RX_OFFLOAD_FLOW_MARK` that can be used to
+     enable/disable PMDs write to `rte_mbuf::hash::fdir::hi` and
+     `rte_mbuf::ol_flags` when flow actions `RTE_FLOW_ACTION_MARK` and
+     `RTE_FLOW_ACTION_FLAG` are enabled.
+  *  PMDs notify the validity of `rte_mbuf::hash:fdir::hi` to the application
+     by enabling `PKT_RX_FDIR_ID` flag in `rte_mbuf::ol_flags`.
+
 
 Removed Items
 -------------
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 7743205d3..f70065043 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -129,6 +129,7 @@ static const struct {
 	RTE_RX_OFFLOAD_BIT2STR(KEEP_CRC),
 	RTE_RX_OFFLOAD_BIT2STR(SCTP_CKSUM),
 	RTE_RX_OFFLOAD_BIT2STR(OUTER_UDP_CKSUM),
+	RTE_RX_OFFLOAD_BIT2STR(FLOW_MARK),
 };
 
 #undef RTE_RX_OFFLOAD_BIT2STR
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index c36c1b631..c4e626da7 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -1048,6 +1048,7 @@ struct rte_eth_conf {
 #define DEV_RX_OFFLOAD_KEEP_CRC		0x00010000
 #define DEV_RX_OFFLOAD_SCTP_CKSUM	0x00020000
 #define DEV_RX_OFFLOAD_OUTER_UDP_CKSUM  0x00040000
+#define DEV_RX_OFFLOAD_FLOW_MARK	0x00100000
 
 #define DEV_RX_OFFLOAD_CHECKSUM (DEV_RX_OFFLOAD_IPV4_CKSUM | \
 				 DEV_RX_OFFLOAD_UDP_CKSUM | \
diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
index 4fee10559..6698640fb 100644
--- a/lib/librte_ethdev/rte_flow.h
+++ b/lib/librte_ethdev/rte_flow.h
@@ -1538,7 +1538,8 @@ enum rte_flow_action_type {
 
 	/**
 	 * Attaches an integer value to packets and sets PKT_RX_FDIR and
-	 * PKT_RX_FDIR_ID mbuf flags.
+	 * PKT_RX_FDIR_ID mbuf flags when
+	 * `rx_mode:offloads:DEV_RX_OFFLOAD_FLOW_MARK` is enabled.
 	 *
 	 * See struct rte_flow_action_mark.
 	 */
@@ -1546,7 +1547,8 @@ enum rte_flow_action_type {
 
 	/**
 	 * Flags packets. Similar to MARK without a specific value; only
-	 * sets the PKT_RX_FDIR mbuf flag.
+	 * sets the PKT_RX_FDIR mbuf flag when
+	 * `rx_mode:offloads:DEV_RX_OFFLOAD_FLOW_MARK` is enabled.
 	 *
 	 * No associated configuration structure.
 	 */
-- 
2.17.1


             reply	other threads:[~2019-10-25 15:21 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-25 15:21 pbhagavatula [this message]
2019-10-25 15:21 ` [dpdk-dev] [PATCH 2/2] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-28 10:50 ` [dpdk-dev] [PATCH 1/2] ethdev: add flow action type update as an offload Ori Kam
2019-10-28 11:53   ` Andrew Rybchenko
2019-10-28 14:00     ` Ori Kam
2019-10-31  9:49       ` Andrew Rybchenko
2019-10-31 14:49         ` Thomas Monjalon
2019-10-31 23:59           ` Zhang, Qi Z
2019-11-01 11:35           ` Andrew Rybchenko
2019-11-03 10:22             ` Ori Kam
2019-11-03 11:41               ` Andrew Rybchenko
2019-11-04 18:37                 ` Ori Kam
2019-11-05  6:50                   ` Andrew Rybchenko
2019-11-05  8:35                     ` Ori Kam
2019-11-05 11:30                       ` Andrew Rybchenko
2019-11-05 16:37                         ` Ori Kam
2019-11-06  6:40                           ` Andrew Rybchenko
2019-11-06  7:42                             ` Ori Kam
2019-11-08  8:35                               ` Andrew Rybchenko
2019-11-08  9:00                                 ` Tom Barbette
2019-11-08 10:28                                 ` Thomas Monjalon
2019-11-08 10:42                                   ` Andrew Rybchenko
2019-11-08 11:03                                     ` Thomas Monjalon
2019-11-08 11:40                                       ` Zhang, Qi Z
2019-11-08 12:12                                         ` Ori Kam
2019-11-08 12:20                                           ` Andrew Rybchenko
2019-11-08 12:42                                             ` Ori Kam
2019-11-08 13:16                                               ` Zhang, Qi Z
2019-11-08 13:26                                                 ` Thomas Monjalon
2019-11-08 13:06                                         ` Thomas Monjalon
2019-11-08 12:00                                       ` Andrew Rybchenko
2019-11-08 13:17                                         ` Thomas Monjalon
2019-11-08 13:27                                           ` Andrew Rybchenko
2019-11-08 13:30                                             ` Thomas Monjalon
2019-11-19  9:24                                               ` Andrew Rybchenko
2019-11-19  9:50                                                 ` Thomas Monjalon
2019-11-19 10:59                                                   ` Andrew Rybchenko
2019-11-19 11:09                                                     ` Thomas Monjalon
2020-07-03 14:34                                                       ` Ferruh Yigit
2021-02-17 13:45                                                         ` Ferruh Yigit
2021-02-17 14:10                                                           ` Thomas Monjalon
2021-04-20  1:05                                                             ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191025152142.12887-1-pbhagavatula@marvell.com \
    --to=pbhagavatula@marvell.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=arybchenko@solarflare.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=jerinj@marvell.com \
    --cc=john.mcnamara@intel.com \
    --cc=marko.kovacevic@intel.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.