All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hemant Agrawal <hemant.agrawal@nxp.com>
To: dev@dpdk.org, akhil.goyal@nxp.com
Subject: [dpdk-dev] [PATCH v2 04/13] crypto/dpaa2_sec: adding NULL cipher or NULL auth
Date: Fri,  1 Nov 2019 23:21:32 +0530	[thread overview]
Message-ID: <20191101175141.4663-4-hemant.agrawal@nxp.com> (raw)
In-Reply-To: <20191101175141.4663-1-hemant.agrawal@nxp.com>

These are supported when using protocol offload mode or in chain mode.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
 drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 22 +++++++----
 drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h   | 41 +++++++++++++++++++++
 2 files changed, 56 insertions(+), 7 deletions(-)

diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
index 70207818b..6c2faa69a 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause
  *
  *   Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
- *   Copyright 2016-2018 NXP
+ *   Copyright 2016-2019 NXP
  *
  */
 
@@ -1837,6 +1837,7 @@ dpaa2_sec_cipher_init(struct rte_cryptodev *dev,
 
 	flc = &priv->flc_desc[0].flc;
 
+	session->ctxt_type = DPAA2_SEC_CIPHER;
 	session->cipher_key.data = rte_zmalloc(NULL, xform->cipher.key.length,
 			RTE_CACHE_LINE_SIZE);
 	if (session->cipher_key.data == NULL) {
@@ -1973,6 +1974,7 @@ dpaa2_sec_auth_init(struct rte_cryptodev *dev,
 	priv->fle_pool = dev_priv->fle_pool;
 	flc = &priv->flc_desc[DESC_INITFINAL].flc;
 
+	session->ctxt_type = DPAA2_SEC_AUTH;
 	session->auth_key.data = rte_zmalloc(NULL, xform->auth.key.length,
 			RTE_CACHE_LINE_SIZE);
 	if (session->auth_key.data == NULL) {
@@ -2481,27 +2483,33 @@ dpaa2_sec_set_session_parameters(struct rte_cryptodev *dev,
 
 	/* Cipher Only */
 	if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER && xform->next == NULL) {
-		session->ctxt_type = DPAA2_SEC_CIPHER;
 		ret = dpaa2_sec_cipher_init(dev, xform, session);
 
 	/* Authentication Only */
 	} else if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
 		   xform->next == NULL) {
-		session->ctxt_type = DPAA2_SEC_AUTH;
 		ret = dpaa2_sec_auth_init(dev, xform, session);
 
 	/* Cipher then Authenticate */
 	} else if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER &&
 		   xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
 		session->ext_params.aead_ctxt.auth_cipher_text = true;
-		ret = dpaa2_sec_aead_chain_init(dev, xform, session);
-
+		if (xform->cipher.algo == RTE_CRYPTO_CIPHER_NULL)
+			ret = dpaa2_sec_auth_init(dev, xform, session);
+		else if (xform->next->auth.algo == RTE_CRYPTO_AUTH_NULL)
+			ret = dpaa2_sec_cipher_init(dev, xform, session);
+		else
+			ret = dpaa2_sec_aead_chain_init(dev, xform, session);
 	/* Authenticate then Cipher */
 	} else if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
 		   xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
 		session->ext_params.aead_ctxt.auth_cipher_text = false;
-		ret = dpaa2_sec_aead_chain_init(dev, xform, session);
-
+		if (xform->auth.algo == RTE_CRYPTO_AUTH_NULL)
+			ret = dpaa2_sec_cipher_init(dev, xform, session);
+		else if (xform->next->cipher.algo == RTE_CRYPTO_CIPHER_NULL)
+			ret = dpaa2_sec_auth_init(dev, xform, session);
+		else
+			ret = dpaa2_sec_aead_chain_init(dev, xform, session);
 	/* AEAD operation for AES-GCM kind of Algorithms */
 	} else if (xform->type == RTE_CRYPTO_SYM_XFORM_AEAD &&
 		   xform->next == NULL) {
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
index b97dacbcb..528b64ef8 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
@@ -200,6 +200,27 @@ typedef struct dpaa2_sec_session_entry {
 } dpaa2_sec_session;
 
 static const struct rte_cryptodev_capabilities dpaa2_sec_capabilities[] = {
+	{	/* NULL (AUTH) */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_NULL,
+				.block_size = 1,
+				.key_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.iv_size = { 0 }
+			}, },
+		}, },
+	},
 	{	/* MD5 HMAC */
 		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
 		{.sym = {
@@ -356,6 +377,26 @@ static const struct rte_cryptodev_capabilities dpaa2_sec_capabilities[] = {
 			}, }
 		}, }
 	},
+	{	/* NULL (CIPHER) */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+			{.cipher = {
+				.algo = RTE_CRYPTO_CIPHER_NULL,
+				.block_size = 1,
+				.key_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.iv_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				}
+			}, },
+		}, }
+	},
 	{	/* AES CBC */
 		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
 		{.sym = {
-- 
2.17.1


  parent reply	other threads:[~2019-11-01 17:55 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-25  8:33 [dpdk-dev] [PATCH 1/8] crypto/dpaa_sec: fix to set PDCP capability flags Hemant Agrawal
2019-10-25  8:33 ` [dpdk-dev] [PATCH 2/8] crypto/dpaa2_sec: add check for the session validity Hemant Agrawal
2019-10-25  8:33 ` [dpdk-dev] [PATCH 3/8] crypto/dpaa_sec: " Hemant Agrawal
2019-10-25  8:33 ` [dpdk-dev] [PATCH 4/8] crypto/dpaa2_sec: adding NULL cipher or NULL auth Hemant Agrawal
2019-10-25  8:33 ` [dpdk-dev] [PATCH 5/8] crypto/dpaa_sec: " Hemant Agrawal
2019-10-25  8:33 ` [dpdk-dev] [PATCH 6/8] crypto/dpaa2_sec: add AES-GCM support for lookaside case Hemant Agrawal
2019-10-25  8:33 ` [dpdk-dev] [PATCH 7/8] crypto/dpaa_sec: " Hemant Agrawal
2019-10-25  8:33 ` [dpdk-dev] [PATCH 8/8] test/cryptodev: enable additional cases for dpaax Hemant Agrawal
2019-11-01 17:51 ` [dpdk-dev] [PATCH v2 01/13] crypto/dpaa_sec: fix to set PDCP capability flags Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 02/13] crypto/dpaa2_sec: add check for the session validity Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 03/13] crypto/dpaa_sec: " Hemant Agrawal
2019-11-01 17:51   ` Hemant Agrawal [this message]
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 05/13] crypto/dpaa_sec: adding NULL cipher or NULL auth Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 06/13] crypto/dpaa2_sec: add AES-GCM support for lookaside case Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 07/13] crypto/dpaa_sec: " Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 08/13] test/cryptodev: enable additional cases for dpaax Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 09/13] crypto/dpaa2_sec: enable warning with truncated sha256 Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 10/13] crypto/dpaa2_sec: remove unwanted context type check Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 11/13] crypto/dpaa_sec: use macros in queue attach and detach Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 12/13] crypto/dpaa2_sec: use aes-ctr initial counter as 1 Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 13/13] crypto/dpaa_sec: enable ipsec aes-ctr to use nonce Hemant Agrawal
2019-11-06  5:17   ` [dpdk-dev] [PATCH v3 01/13] crypto/dpaa_sec: fix to set PDCP capability flags Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 02/13] crypto/dpaa2_sec: add check for the session validity Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 03/13] crypto/dpaa_sec: " Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 04/13] crypto/dpaa2_sec: adding NULL cipher or NULL auth Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 05/13] crypto/dpaa_sec: " Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 06/13] crypto/dpaa2_sec: add AES-GCM support for lookaside case Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 07/13] crypto/dpaa_sec: " Hemant Agrawal
2019-11-07  8:48       ` Hemant Agrawal
2019-11-07 10:07         ` Akhil Goyal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 08/13] test/cryptodev: enable additional cases for dpaax Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 09/13] crypto/dpaa2_sec: enable warning with truncated sha256 Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 10/13] crypto/dpaa2_sec: remove unwanted context type check Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 11/13] crypto/dpaa_sec: use macros in queue attach and detach Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 12/13] crypto/dpaa2_sec: use aes-ctr initial counter as 1 Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 13/13] crypto/dpaa_sec: enable ipsec aes-ctr to use nonce Hemant Agrawal
2019-11-06 13:09     ` [dpdk-dev] [PATCH v3 01/13] crypto/dpaa_sec: fix to set PDCP capability flags Akhil Goyal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191101175141.4663-4-hemant.agrawal@nxp.com \
    --to=hemant.agrawal@nxp.com \
    --cc=akhil.goyal@nxp.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.