On Mon, Oct 28, 2019 at 05:00:45PM +0200, Jani Nikula wrote:
> Update from the DCS specification.
> 
> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> ---
>  include/video/mipi_display.h | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h
> index 6b6390dfa203..928f8c4b6658 100644
> --- a/include/video/mipi_display.h
> +++ b/include/video/mipi_display.h
> @@ -79,7 +79,9 @@ enum {
>  enum {
>  	MIPI_DCS_NOP			= 0x00,
>  	MIPI_DCS_SOFT_RESET		= 0x01,
> +	MIPI_DCS_GET_COMPRESSION_MODE	= 0x03,
>  	MIPI_DCS_GET_DISPLAY_ID		= 0x04,
> +	MIPI_DCS_GET_ERROR_COUNT_ON_DSI	= 0x05,
>  	MIPI_DCS_GET_RED_CHANNEL	= 0x06,
>  	MIPI_DCS_GET_GREEN_CHANNEL	= 0x07,
>  	MIPI_DCS_GET_BLUE_CHANNEL	= 0x08,
> @@ -94,6 +96,8 @@ enum {
>  	MIPI_DCS_EXIT_SLEEP_MODE	= 0x11,
>  	MIPI_DCS_ENTER_PARTIAL_MODE	= 0x12,
>  	MIPI_DCS_ENTER_NORMAL_MODE	= 0x13,
> +	MIPI_DCS_GET_IMAGE_CHECKSUM_RGB	= 0x14,
> +	MIPI_DCS_GET_IMAGE_CHECKSUM_CT	= 0x15,
>  	MIPI_DCS_EXIT_INVERT_MODE	= 0x20,
>  	MIPI_DCS_ENTER_INVERT_MODE	= 0x21,
>  	MIPI_DCS_SET_GAMMA_CURVE	= 0x26,
> @@ -105,6 +109,7 @@ enum {
>  	MIPI_DCS_WRITE_LUT		= 0x2D,
>  	MIPI_DCS_READ_MEMORY_START	= 0x2E,
>  	MIPI_DCS_SET_PARTIAL_AREA	= 0x30,
> +	MIPI_DCS_SET_PARTIAL_COLUMNS	= 0x31,
>  	MIPI_DCS_SET_SCROLL_AREA	= 0x33,
>  	MIPI_DCS_SET_TEAR_OFF		= 0x34,
>  	MIPI_DCS_SET_TEAR_ON		= 0x35,
> @@ -114,7 +119,10 @@ enum {
>  	MIPI_DCS_ENTER_IDLE_MODE	= 0x39,
>  	MIPI_DCS_SET_PIXEL_FORMAT	= 0x3A,
>  	MIPI_DCS_WRITE_MEMORY_CONTINUE	= 0x3C,
> +	MIPI_DCS_SET_3D_CONTROL		= 0x3D,
>  	MIPI_DCS_READ_MEMORY_CONTINUE	= 0x3E,
> +	MIPI_DCS_GET_3D_CONTROL		= 0x3F,
> +	MIPI_DCS_SET_VSYNC_TIMING	= 0x40,
>  	MIPI_DCS_SET_TEAR_SCANLINE	= 0x44,
>  	MIPI_DCS_GET_SCANLINE		= 0x45,
>  	MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51,		/* MIPI DCS 1.3 */
> @@ -126,7 +134,9 @@ enum {
>  	MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E,	/* MIPI DCS 1.3 */
>  	MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F,	/* MIPI DCS 1.3 */
>  	MIPI_DCS_READ_DDB_START		= 0xA1,
> +	MIPI_DCS_READ_PPS_START		= 0xA2,
>  	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
> +	MIPI_DCS_READ_PPS_CONTINUE	= 0xA9,
>  };
>  
>  /* MIPI DCS pixel formats */
> -- 
> 2.20.1

I only have a copy of DCS 1.2, which doesn't seem to have these values.
Let me see if I can find a more updated version.

Thierry