All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kent Gibson <warthog618@gmail.com>
To: linux-gpio@vger.kernel.org, bgolaszewski@baylibre.com,
	linus.walleij@linaro.org, bamv2005@gmail.com
Cc: drew@pdp7.com, thomas.petazzoni@bootlin.com,
	Kent Gibson <warthog618@gmail.com>
Subject: [PATCH v6 5/7] gpio: mockup: add set_config to support pull up/down
Date: Tue,  5 Nov 2019 10:04:27 +0800	[thread overview]
Message-ID: <20191105020429.18942-6-warthog618@gmail.com> (raw)
In-Reply-To: <20191105020429.18942-1-warthog618@gmail.com>

Add support for the pull up/down state set via gpiolib line requests to
be reflected in the state of the mockup.
Use case is for testing of the GPIO uAPI, specifically the pull up/down
flags.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
---
 drivers/gpio/gpio-mockup.c | 94 ++++++++++++++++++++++++--------------
 1 file changed, 60 insertions(+), 34 deletions(-)

diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c
index 213aedc97dc2..c28219962ae2 100644
--- a/drivers/gpio/gpio-mockup.c
+++ b/drivers/gpio/gpio-mockup.c
@@ -146,6 +146,61 @@ static void gpio_mockup_set_multiple(struct gpio_chip *gc,
 	mutex_unlock(&chip->lock);
 }
 
+static int gpio_mockup_apply_pull(struct gpio_mockup_chip *chip,
+				  unsigned int offset, int value)
+{
+	struct gpio_desc *desc;
+	struct gpio_chip *gc;
+	struct irq_sim *sim;
+	int curr, irq, irq_type;
+
+	gc = &chip->gc;
+	desc = &gc->gpiodev->descs[offset];
+	sim = &chip->irqsim;
+
+	mutex_lock(&chip->lock);
+
+	if (test_bit(FLAG_REQUESTED, &desc->flags) &&
+		!test_bit(FLAG_IS_OUT, &desc->flags)) {
+		curr = __gpio_mockup_get(chip, offset);
+		if (curr == value)
+			goto out;
+
+		irq = irq_sim_irqnum(sim, offset);
+		irq_type = irq_get_trigger_type(irq);
+
+		if ((value == 1 && (irq_type & IRQ_TYPE_EDGE_RISING)) ||
+			(value == 0 && (irq_type & IRQ_TYPE_EDGE_FALLING)))
+			irq_sim_fire(sim, offset);
+	}
+
+	/* Change the value unless we're actively driving the line. */
+	if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
+		!test_bit(FLAG_IS_OUT, &desc->flags))
+		__gpio_mockup_set(chip, offset, value);
+
+out:
+	chip->lines[offset].pull = value;
+	mutex_unlock(&chip->lock);
+	return 0;
+}
+
+static int gpio_mockup_set_config(struct gpio_chip *gc,
+				  unsigned int offset, unsigned long config)
+{
+	struct gpio_mockup_chip *chip = gpiochip_get_data(gc);
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_BIAS_PULL_UP:
+		return gpio_mockup_apply_pull(chip, offset, 1);
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		return gpio_mockup_apply_pull(chip, offset, 0);
+	default:
+		break;
+	}
+	return -ENOTSUPP;
+}
+
 static int gpio_mockup_dirout(struct gpio_chip *gc,
 			      unsigned int offset, int value)
 {
@@ -226,12 +281,8 @@ static ssize_t gpio_mockup_debugfs_write(struct file *file,
 					 size_t size, loff_t *ppos)
 {
 	struct gpio_mockup_dbgfs_private *priv;
-	int rv, val, curr, irq, irq_type;
-	struct gpio_mockup_chip *chip;
+	int rv, val;
 	struct seq_file *sfile;
-	struct gpio_desc *desc;
-	struct gpio_chip *gc;
-	struct irq_sim *sim;
 
 	if (*ppos != 0)
 		return -EINVAL;
@@ -244,35 +295,9 @@ static ssize_t gpio_mockup_debugfs_write(struct file *file,
 
 	sfile = file->private_data;
 	priv = sfile->private;
-	chip = priv->chip;
-	gc = &chip->gc;
-	desc = &gc->gpiodev->descs[priv->offset];
-	sim = &chip->irqsim;
-
-	mutex_lock(&chip->lock);
-
-	if (test_bit(FLAG_REQUESTED, &desc->flags) &&
-	    !test_bit(FLAG_IS_OUT, &desc->flags)) {
-		curr = __gpio_mockup_get(chip, priv->offset);
-		if (curr == val)
-			goto out;
-
-		irq = irq_sim_irqnum(sim, priv->offset);
-		irq_type = irq_get_trigger_type(irq);
-
-		if ((val == 1 && (irq_type & IRQ_TYPE_EDGE_RISING)) ||
-		    (val == 0 && (irq_type & IRQ_TYPE_EDGE_FALLING)))
-			irq_sim_fire(sim, priv->offset);
-	}
-
-	/* Change the value unless we're actively driving the line. */
-	if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
-	    !test_bit(FLAG_IS_OUT, &desc->flags))
-		__gpio_mockup_set(chip, priv->offset, val);
-
-out:
-	chip->lines[priv->offset].pull = val;
-	mutex_unlock(&chip->lock);
+	rv = gpio_mockup_apply_pull(priv->chip, priv->offset, val);
+	if (rv)
+		return rv;
 
 	return size;
 }
@@ -418,6 +443,7 @@ static int gpio_mockup_probe(struct platform_device *pdev)
 	gc->direction_output = gpio_mockup_dirout;
 	gc->direction_input = gpio_mockup_dirin;
 	gc->get_direction = gpio_mockup_get_direction;
+	gc->set_config = gpio_mockup_set_config;
 	gc->to_irq = gpio_mockup_to_irq;
 	gc->free = gpio_mockup_free;
 
-- 
2.23.0


  parent reply	other threads:[~2019-11-05  2:05 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-05  2:04 [PATCH v6 0/7] gpio: expose line bias flags to userspace Kent Gibson
2019-11-05  2:04 ` [PATCH v6 1/7] gpio: expose pull-up/pull-down line " Kent Gibson
2019-11-05  2:04 ` [PATCH v6 2/7] gpiolib: add support for pull up/down to lineevent_create Kent Gibson
2019-11-05  2:04 ` [PATCH v6 3/7] gpiolib: add support for disabling line bias Kent Gibson
2019-11-05  2:04 ` [PATCH v6 4/7] gpiolib: add support for biasing output lines Kent Gibson
2019-11-06 19:39   ` Drew Fustini
2019-11-06 23:56     ` Kent Gibson
2019-11-05  2:04 ` Kent Gibson [this message]
2019-11-05  2:04 ` [PATCH v6 6/7] gpiolib: move validation of line handle flags into helper function Kent Gibson
2019-11-05  2:04 ` [PATCH v6 7/7] gpio: add new SET_CONFIG ioctl() to gpio chardev Kent Gibson
2019-11-05 15:05 ` [PATCH v6 0/7] gpio: expose line bias flags to userspace Bartosz Golaszewski
2019-11-07  8:10   ` Linus Walleij
2019-11-05 15:26 ` Kent Gibson
2019-11-05 16:24   ` Bartosz Golaszewski
2019-11-05 21:07     ` Bartosz Golaszewski
2019-11-06  6:48       ` Kent Gibson
2019-11-06 13:59         ` Bartosz Golaszewski
2019-11-06 16:58           ` Kent Gibson
2019-11-06 17:06             ` Bartosz Golaszewski
2019-11-06 23:20               ` Kent Gibson
2019-11-07 10:39             ` Kent Gibson
2019-11-07 11:28               ` Bartosz Golaszewski
2019-11-07 12:18                 ` Kent Gibson
2019-11-05 23:15     ` Kent Gibson
2019-11-07 17:57 ` Bartosz Golaszewski
2020-04-15 14:03 ` boards to test gpio line bias flags? Drew Fustini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191105020429.18942-6-warthog618@gmail.com \
    --to=warthog618@gmail.com \
    --cc=bamv2005@gmail.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=drew@pdp7.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.