From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Walle Date: Wed, 6 Nov 2019 00:03:22 +0100 Subject: [U-Boot] [PATCH v3 2/3] arm: ls1028a: use the new flexspi driver In-Reply-To: <20191105230323.27284-1-michael@walle.cc> References: <20191105230323.27284-1-michael@walle.cc> Message-ID: <20191105230323.27284-2-michael@walle.cc> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Also align the fspi node with the kernel one. Signed-off-by: Michael Walle Reviewed-by: Kuldeep Singh --- changes since v1: - none changes since v2: - none arch/arm/dts/fsl-ls1028a.dtsi | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi index 43a154e8e7..774e477542 100644 --- a/arch/arm/dts/fsl-ls1028a.dtsi +++ b/arch/arm/dts/fsl-ls1028a.dtsi @@ -49,14 +49,16 @@ <1 10 0x8>; /* Hypervisor PPI, active-low */ }; - fspi: flexspi at 20C0000 { - compatible = "nxp,dn-fspi"; + fspi: flexspi at 20c0000 { + compatible = "nxp,lx2160a-fspi"; #address-cells = <1>; #size-cells = <0>; - reg = <0x0 0x20C0000 0x0 0x10000>, - <0x0 0x20000000 0x0 0x10000000>; /*64MB flash*/ - reg-names = "FSPI", "FSPI-memory"; - num-cs = <1>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "fspi_en", "fspi"; + interrupts = <0 25 0x4>; status = "disabled"; }; -- 2.20.1