All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org, tiwai@suse.de, broonie@kernel.org,
	vkoul@kernel.org, gregkh@linuxfoundation.org, jank@cadence.com,
	srinivas.kandagatla@linaro.org, slawomir.blauciak@intel.com,
	Bard liao <yung-chuan.liao@linux.intel.com>,
	Rander Wang <rander.wang@linux.intel.com>,
	Ranjani Sridharan <ranjani.sridharan@linux.intel.com>,
	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
	Sanyog Kale <sanyog.r.kale@intel.com>
Subject: [PATCH v2 08/19] soundwire: intel: reset pm_runtime status during system resume
Date: Wed,  6 Nov 2019 13:22:12 -0600	[thread overview]
Message-ID: <20191106192223.6003-9-pierre-louis.bossart@linux.intel.com> (raw)
In-Reply-To: <20191106192223.6003-1-pierre-louis.bossart@linux.intel.com>

The system resume does the entire bus re-initialization and brings it
to full-power. If the device was pm_runtime suspended, there is no
need to run the pm_runtime resume sequence after the system runtime.

Follow the documentation from runtime_pm.rst, and conditionally
disable, set_active and re-enable the device on system resume.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 drivers/soundwire/intel.c     | 30 ++++++++++++++++++++++++++++++
 include/linux/soundwire/sdw.h |  1 +
 2 files changed, 31 insertions(+)

diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index 650581348732..c3cd7d2d5a34 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -1298,6 +1298,7 @@ static int intel_master_remove(struct sdw_master_device *md)
 
 static int intel_suspend(struct device *dev)
 {
+	struct sdw_master_device *md = to_sdw_master_device(dev);
 	struct sdw_cdns *cdns = dev_get_drvdata(dev);
 	struct sdw_intel *sdw = cdns_to_intel(cdns);
 	int ret;
@@ -1308,6 +1309,20 @@ static int intel_suspend(struct device *dev)
 		return 0;
 	}
 
+	if (pm_runtime_status_suspended(dev)) {
+		dev_dbg(dev,
+			"%s: pm_runtime status: suspended\n",
+			__func__);
+
+		/*
+		 * keep track of the state for the system resume, where
+		 * we will need to reset the pm_runtime status to active
+		 */
+		md->pm_runtime_suspended = true;
+
+		return 0;
+	}
+
 	ret = sdw_cdns_enable_interrupt(cdns, false);
 	if (ret < 0) {
 		dev_err(dev, "cannot disable interrupts on suspend\n");
@@ -1356,6 +1371,7 @@ static int intel_suspend_runtime(struct device *dev)
 
 static int intel_resume(struct device *dev)
 {
+	struct sdw_master_device *md = to_sdw_master_device(dev);
 	struct sdw_cdns *cdns = dev_get_drvdata(dev);
 	struct sdw_intel *sdw = cdns_to_intel(cdns);
 	int ret;
@@ -1366,6 +1382,20 @@ static int intel_resume(struct device *dev)
 		return 0;
 	}
 
+	if (md->pm_runtime_suspended) {
+		dev_dbg(dev,
+			"%s: pm_runtime status was suspended, forcing active\n",
+			__func__);
+
+		/* follow required sequence from runtime_pm.rst */
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_mark_last_busy(dev);
+		pm_runtime_enable(dev);
+
+		md->pm_runtime_suspended = false;
+	}
+
 	ret = intel_init(sdw);
 	if (ret) {
 		dev_err(dev, "%s failed: %d", __func__, ret);
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 17ec786d3a15..c06c515abad9 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -583,6 +583,7 @@ struct sdw_master_device {
 	struct device dev;
 	int link_id;
 	struct sdw_md_driver *driver;
+	bool pm_runtime_suspended;
 	void *pdata; /* core does not touch */
 };
 
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: alsa-devel@alsa-project.org
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
	tiwai@suse.de, gregkh@linuxfoundation.org,
	linux-kernel@vger.kernel.org,
	Ranjani Sridharan <ranjani.sridharan@linux.intel.com>,
	vkoul@kernel.org, broonie@kernel.org,
	srinivas.kandagatla@linaro.org, jank@cadence.com,
	slawomir.blauciak@intel.com,
	Sanyog Kale <sanyog.r.kale@intel.com>,
	Bard liao <yung-chuan.liao@linux.intel.com>,
	Rander Wang <rander.wang@linux.intel.com>
Subject: [alsa-devel] [PATCH v2 08/19] soundwire: intel: reset pm_runtime status during system resume
Date: Wed,  6 Nov 2019 13:22:12 -0600	[thread overview]
Message-ID: <20191106192223.6003-9-pierre-louis.bossart@linux.intel.com> (raw)
In-Reply-To: <20191106192223.6003-1-pierre-louis.bossart@linux.intel.com>

The system resume does the entire bus re-initialization and brings it
to full-power. If the device was pm_runtime suspended, there is no
need to run the pm_runtime resume sequence after the system runtime.

Follow the documentation from runtime_pm.rst, and conditionally
disable, set_active and re-enable the device on system resume.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 drivers/soundwire/intel.c     | 30 ++++++++++++++++++++++++++++++
 include/linux/soundwire/sdw.h |  1 +
 2 files changed, 31 insertions(+)

diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index 650581348732..c3cd7d2d5a34 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -1298,6 +1298,7 @@ static int intel_master_remove(struct sdw_master_device *md)
 
 static int intel_suspend(struct device *dev)
 {
+	struct sdw_master_device *md = to_sdw_master_device(dev);
 	struct sdw_cdns *cdns = dev_get_drvdata(dev);
 	struct sdw_intel *sdw = cdns_to_intel(cdns);
 	int ret;
@@ -1308,6 +1309,20 @@ static int intel_suspend(struct device *dev)
 		return 0;
 	}
 
+	if (pm_runtime_status_suspended(dev)) {
+		dev_dbg(dev,
+			"%s: pm_runtime status: suspended\n",
+			__func__);
+
+		/*
+		 * keep track of the state for the system resume, where
+		 * we will need to reset the pm_runtime status to active
+		 */
+		md->pm_runtime_suspended = true;
+
+		return 0;
+	}
+
 	ret = sdw_cdns_enable_interrupt(cdns, false);
 	if (ret < 0) {
 		dev_err(dev, "cannot disable interrupts on suspend\n");
@@ -1356,6 +1371,7 @@ static int intel_suspend_runtime(struct device *dev)
 
 static int intel_resume(struct device *dev)
 {
+	struct sdw_master_device *md = to_sdw_master_device(dev);
 	struct sdw_cdns *cdns = dev_get_drvdata(dev);
 	struct sdw_intel *sdw = cdns_to_intel(cdns);
 	int ret;
@@ -1366,6 +1382,20 @@ static int intel_resume(struct device *dev)
 		return 0;
 	}
 
+	if (md->pm_runtime_suspended) {
+		dev_dbg(dev,
+			"%s: pm_runtime status was suspended, forcing active\n",
+			__func__);
+
+		/* follow required sequence from runtime_pm.rst */
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_mark_last_busy(dev);
+		pm_runtime_enable(dev);
+
+		md->pm_runtime_suspended = false;
+	}
+
 	ret = intel_init(sdw);
 	if (ret) {
 		dev_err(dev, "%s failed: %d", __func__, ret);
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 17ec786d3a15..c06c515abad9 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -583,6 +583,7 @@ struct sdw_master_device {
 	struct device dev;
 	int link_id;
 	struct sdw_md_driver *driver;
+	bool pm_runtime_suspended;
 	void *pdata; /* core does not touch */
 };
 
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  parent reply	other threads:[~2019-11-06 19:22 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-06 19:22 [PATCH v2 00/19] soundwire: code hardening and suspend-resume support Pierre-Louis Bossart
2019-11-06 19:22 ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 01/19] soundwire: intel/cadence: fix timeouts in MSI mode Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 02/19] soundwire: fix race between driver probe and update_status callback Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 03/19] soundwire: bus: add PM/no-PM versions of read/write functions Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 04/19] soundwire: bus: write Slave Device Number without runtime_pm Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 05/19] soundwire: intel: add helpers for link power down and shim wake Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 06/19] soundwire: intel: Add basic power management support Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 07/19] soundwire: intel: add pm_runtime support Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` Pierre-Louis Bossart [this message]
2019-11-06 19:22   ` [alsa-devel] [PATCH v2 08/19] soundwire: intel: reset pm_runtime status during system resume Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 09/19] soundwire: bus: add helper to reset Slave status to UNATTACHED Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 10/19] soundwire: intel: call helper to reset Slave states on resume Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 11/19] soundwire: bus: check first if Slaves become UNATTACHED Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 12/19] soundwire: add enumeration_complete signaling Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 13/19] soundwire: bus: add initialization_complete signaling Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 14/19] soundwire: intel: disable pm_runtime when removing a master Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 15/19] soundwire: bus: disable pm_runtime in sdw_slave_delete Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 16/19] soundwire: stream: update state machine and add state checks Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 17/19] soundwire: stream: only prepare stream when it is configured Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 18/19] soundwire: stream: do not update parameters during DISABLED-PREPARED transition Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart
2019-11-06 19:22 ` [PATCH v2 19/19] soundwire: intel: reinitialize IP+DSP in .prepare() Pierre-Louis Bossart
2019-11-06 19:22   ` [alsa-devel] " Pierre-Louis Bossart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191106192223.6003-9-pierre-louis.bossart@linux.intel.com \
    --to=pierre-louis.bossart@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jank@cadence.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rander.wang@linux.intel.com \
    --cc=ranjani.sridharan@linux.intel.com \
    --cc=sanyog.r.kale@intel.com \
    --cc=slawomir.blauciak@intel.com \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=tiwai@suse.de \
    --cc=vkoul@kernel.org \
    --cc=yung-chuan.liao@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.