[PATCH linux dev-5.3 0/2] hwmon: (pmbus/ibm-cffps) Fixes for the LED subsystem

[PATCH linux dev-5.3 0/2] hwmon: (pmbus/ibm-cffps) Fixes for the LED subsystem

[Eddie James]

This series fixes a "scheduling while atomic" bug in the CFFPS driver and some
incorrect behavior with the LED blink functionality.

Eddie James (2):
  hwmon: (pmbus/ibm-cffps) Switch LEDs to blocking brightness call
  hwmon: (pmbus/ibm-cffps) Fix LED blink behavior

 drivers/hwmon/pmbus/ibm-cffps.c | 37 ++++++++++++++++++++++-----------
 1 file changed, 25 insertions(+), 12 deletions(-)

-- 
2.23.0

[PATCH linux dev-5.3 1/2] hwmon: (pmbus/ibm-cffps) Switch LEDs to blocking brightness call

[Eddie James]

Since i2c_smbus functions can sleep, the brightness setting function
for this driver must be the blocking version to avoid scheduling while
atomic.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 drivers/hwmon/pmbus/ibm-cffps.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
index d44745e498e7..aa4cdbbb100a 100644
--- a/drivers/hwmon/pmbus/ibm-cffps.c
+++ b/drivers/hwmon/pmbus/ibm-cffps.c
@@ -292,8 +292,8 @@ static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
 	return rc;
 }
 
-static void ibm_cffps_led_brightness_set(struct led_classdev *led_cdev,
-					 enum led_brightness brightness)
+static int ibm_cffps_led_brightness_set(struct led_classdev *led_cdev,
+					enum led_brightness brightness)
 {
 	int rc;
 	struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led);
@@ -311,9 +311,11 @@ static void ibm_cffps_led_brightness_set(struct led_classdev *led_cdev,
 	rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD,
 				       psu->led_state);
 	if (rc < 0)
-		return;
+		return rc;
 
 	led_cdev->brightness = brightness;
+
+	return 0;
 }
 
 static int ibm_cffps_led_blink_set(struct led_classdev *led_cdev,
@@ -351,7 +353,7 @@ static void ibm_cffps_create_led_class(struct ibm_cffps *psu)
 		 client->addr);
 	psu->led.name = psu->led_name;
 	psu->led.max_brightness = LED_FULL;
-	psu->led.brightness_set = ibm_cffps_led_brightness_set;
+	psu->led.brightness_set_blocking = ibm_cffps_led_brightness_set;
 	psu->led.blink_set = ibm_cffps_led_blink_set;
 
 	rc = devm_led_classdev_register(dev, &psu->led);
-- 
2.23.0

[PATCH linux dev-5.3 2/2] hwmon: (pmbus/ibm-cffps) Fix LED blink behavior

[Eddie James]

The LED blink_set function incorrectly did not tell the PSU LED to blink
if brightness was LED_OFF. Fix this, and also correct the LED_OFF
command data, which should give control of the LED back to the PSU
firmware. Also prevent I2C failures from getting the driver LED state
out of sync and add some dev_dbg statements.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 drivers/hwmon/pmbus/ibm-cffps.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
index aa4cdbbb100a..929c909ac27a 100644
--- a/drivers/hwmon/pmbus/ibm-cffps.c
+++ b/drivers/hwmon/pmbus/ibm-cffps.c
@@ -39,9 +39,13 @@
 #define CFFPS_MFR_VAUX_FAULT			BIT(6)
 #define CFFPS_MFR_CURRENT_SHARE_WARNING		BIT(7)
 
+/*
+ * LED off state actually relinquishes LED control to PSU firmware, so it can
+ * turn on the LED for faults.
+ */
+#define CFFPS_LED_OFF				0
 #define CFFPS_LED_BLINK				BIT(0)
 #define CFFPS_LED_ON				BIT(1)
-#define CFFPS_LED_OFF				BIT(2)
 #define CFFPS_BLINK_RATE_MS			250
 
 enum {
@@ -296,23 +300,31 @@ static int ibm_cffps_led_brightness_set(struct led_classdev *led_cdev,
 					enum led_brightness brightness)
 {
 	int rc;
+	u8 next_led_state;
 	struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led);
 
 	if (brightness == LED_OFF) {
-		psu->led_state = CFFPS_LED_OFF;
+		next_led_state = CFFPS_LED_OFF;
 	} else {
 		brightness = LED_FULL;
+
 		if (psu->led_state != CFFPS_LED_BLINK)
-			psu->led_state = CFFPS_LED_ON;
+			next_led_state = CFFPS_LED_ON;
+		else
+			next_led_state = CFFPS_LED_BLINK;
 	}
 
+	dev_dbg(&psu->client->dev, "LED brightness set: %d. Command: %d.\n",
+		brightness, next_led_state);
+
 	pmbus_set_page(psu->client, 0);
 
 	rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD,
-				       psu->led_state);
+				       next_led_state);
 	if (rc < 0)
 		return rc;
 
+	psu->led_state = next_led_state;
 	led_cdev->brightness = brightness;
 
 	return 0;
@@ -325,10 +337,7 @@ static int ibm_cffps_led_blink_set(struct led_classdev *led_cdev,
 	int rc;
 	struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led);
 
-	psu->led_state = CFFPS_LED_BLINK;
-
-	if (led_cdev->brightness == LED_OFF)
-		return 0;
+	dev_dbg(&psu->client->dev, "LED blink set.\n");
 
 	pmbus_set_page(psu->client, 0);
 
@@ -337,6 +346,8 @@ static int ibm_cffps_led_blink_set(struct led_classdev *led_cdev,
 	if (rc < 0)
 		return rc;
 
+	psu->led_state = CFFPS_LED_BLINK;
+	led_cdev->brightness = LED_FULL;
 	*delay_on = CFFPS_BLINK_RATE_MS;
 	*delay_off = CFFPS_BLINK_RATE_MS;
 
-- 
2.23.0