Re: [PATCH 06/11] thermal: mediatek: Appease the kernel-doc deity

[Viresh Kumar <viresh.kumar@linaro.org>]

On 06-11-19, 18:58, Amit Kucheria wrote:
> Replace a comment starting with /** by simply /* to avoid having it
> interpreted as a kernel-doc comment. Describe missing function
> parameters where needed.
> 
> Fixes up the following warnings when compiled with make W=1:
> 
> linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt8173_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt2701_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt2712_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt8183_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter
> or member 'sensno' not described in 'raw_to_mcelsius'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/mtk_thermal.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> index acf4854cbb8b8..76e30603d4d58 100644
> --- a/drivers/thermal/mtk_thermal.c
> +++ b/drivers/thermal/mtk_thermal.c
> @@ -358,7 +358,7 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
>  static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
>  static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
>  
> -/**
> +/*
>   * The MT8173 thermal controller has four banks. Each bank can read up to
>   * four temperature sensors simultaneously. The MT8173 has a total of 5
>   * temperature sensors. We use each bank to measure a certain area of the
> @@ -400,7 +400,7 @@ static const struct mtk_thermal_data mt8173_thermal_data = {
>  	.sensor_mux_values = mt8173_mux_values,
>  };
>  
> -/**
> +/*
>   * The MT2701 thermal controller has one bank, which can read up to
>   * three temperature sensors simultaneously. The MT2701 has a total of 3
>   * temperature sensors.
> @@ -430,7 +430,7 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
>  	.sensor_mux_values = mt2701_mux_values,
>  };
>  
> -/**
> +/*
>   * The MT2712 thermal controller has one bank, which can read up to
>   * four temperature sensors simultaneously. The MT2712 has a total of 4
>   * temperature sensors.
> @@ -484,7 +484,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
>  	.sensor_mux_values = mt7622_mux_values,
>  };
>  
> -/**
> +/*
>   * The MT8183 thermal controller has one bank for the current SW framework.
>   * The MT8183 has a total of 6 temperature sensors.
>   * There are two thermal controller to control the six sensor.
> @@ -495,7 +495,6 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
>   * data, and this indeed needs the temperatures of the individual banks
>   * for making better decisions.
>   */
> -
>  static const struct mtk_thermal_data mt8183_thermal_data = {
>  	.auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
>  	.num_banks = MT8183_NUM_SENSORS_PER_ZONE,
> @@ -519,7 +518,8 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
>  
>  /**
>   * raw_to_mcelsius - convert a raw ADC value to mcelsius
> - * @mt:		The thermal controller
> + * @mt:	The thermal controller
> + * @sensno:	sensor number
>   * @raw:	raw ADC value

This doesn't look related to $subject

>   *
>   * This converts the raw ADC value to mcelsius using the SoC specific
> -- 
> 2.17.1

-- 
viresh