From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Sun, 10 Nov 2019 16:40:08 +0100 Subject: [U-Boot] [PATCH 5/9] mmc: tmio: sdhi: Adjust HS400 calibration offsets In-Reply-To: <20191110154012.24603-1-marek.vasut+renesas@gmail.com> References: <20191110154012.24603-1-marek.vasut+renesas@gmail.com> Message-ID: <20191110154012.24603-5-marek.vasut+renesas@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Adjust the TMPPORT3 offsets according to the latest information from the chip vendor. Signed-off-by: Marek Vasut Cc: Masahiro Yamada --- drivers/mmc/renesas-sdhi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/renesas-sdhi.c b/drivers/mmc/renesas-sdhi.c index 8c96e5c8a4..79672653ff 100644 --- a/drivers/mmc/renesas-sdhi.c +++ b/drivers/mmc/renesas-sdhi.c @@ -604,22 +604,22 @@ static void renesas_sdhi_filter_caps(struct udevice *dev) (rmobile_get_cpu_rev_integer() == 1) && (rmobile_get_cpu_rev_fraction() > 2)) { priv->adjust_hs400_enable = true; - priv->adjust_hs400_offset = 0; + priv->adjust_hs400_offset = 3; priv->adjust_hs400_calibrate = 0x9; } /* M3N can use HS400 with manual adjustment */ if (rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A77965) { priv->adjust_hs400_enable = true; - priv->adjust_hs400_offset = 0; + priv->adjust_hs400_offset = 3; priv->adjust_hs400_calibrate = 0x0; } /* E3 can use HS400 with manual adjustment */ if (rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A77990) { priv->adjust_hs400_enable = true; - priv->adjust_hs400_offset = 0; - priv->adjust_hs400_calibrate = 0x2; + priv->adjust_hs400_offset = 3; + priv->adjust_hs400_calibrate = 0x4; } /* H3 ES1.x, ES2.0 and M3W ES1.0, ES1.1, ES1.2 uses 4 tuning taps */ -- 2.24.0.rc1