From: "Jérémy Rosen" <jeremy.rosen@smile.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v2 0/9] use host-systemd to enable units
Date: Mon, 11 Nov 2019 18:24:34 +0100 [thread overview]
Message-ID: <20191111172443.6874-1-jeremy.rosen@smile.fr> (raw)
As discussed during the buildroot dev days, upstream systemd now relies
on systemctl to enable units at install time.
The patch bumping systemd to v243 in buildroot did add the logic to
handle that through Makefiles.
This patch adds support for compiling host-systemd and using it to
enable all units.
* 0001-new-recipe-host-systemd.patch
I might have missed some build-dependencies. Please review carefully
* 0002-use-host-systemctl-preset-all-to-enable-units.patch
Use the previous patch to simplify the systemd recipe
* 0003-fix-tty-handling.patch
TTY handling is tricky. Separate it in its own patch
Everything else deals with updating the packages
Version 2
* run check-package
* removed host-side configuration option
* rework tty-handling to work with the now-upstreamed fix,
carry the corresponding patch locally until next systemd bump
* package/dante : dropped patch. it is now default-enabled
* package/linuxptp : enable both units by default
* package/tor : dropped patch. it is now default-enabled
* package/sysklogd : dropped patch. it is now default-enabled
* package/targetfbcli : dropped patch. it is now default-enabled
* package/docker : dropped patch. both service and socket are now enabled
* package/avahi : dropped patch. it is now default-enabled
* package/wpa_supplicant : enabled the daemon but not the templates
a patch in upstream-systemd has been submited
a patch in upstream wpa_supplicant has been around since 2014 :(
J?r?my Rosen (9):
new recipe : host-systemd
use host-systemctl preset all to enable units
fix tty handling
fix trivial packages with buildroot-provided services
fix trivial cases, upstream-provided services
package/connman: adapt to preset-all
package/linuxptp adapt to preset-all
package/network-manager: adapt to preset-all
package/wpa_supplicant: adapt for preset-all
package/acpid/acpid.mk | 3 -
package/apache/apache.mk | 3 -
package/audit/audit.mk | 4 -
package/avahi/avahi.mk | 8 -
package/babeld/babeld.mk | 5 -
package/bandwidthd/bandwidthd.mk | 5 -
package/bind/bind.mk | 5 -
package/bluez5_utils/bluez5_utils.mk | 8 -
package/boinc/boinc.mk | 5 -
package/brltty/brltty.mk | 4 -
package/chrony/chrony.mk | 3 -
package/collectd/collectd.mk | 3 -
package/connman/connman.mk | 6 -
package/darkhttpd/darkhttpd.mk | 3 -
package/dcron/dcron.mk | 3 -
package/dhcp/dhcp.mk | 5 -
package/dhcpcd/dhcpcd.mk | 3 -
package/domoticz/domoticz.mk | 3 -
package/dropbear/dropbear.mk | 3 -
package/exim/exim.mk | 3 -
package/fail2ban/fail2ban.mk | 3 -
package/freescale-imx/imx-uuc/imx-uuc.mk | 3 -
package/gerbera/gerbera.mk | 6 -
package/haveged/haveged.mk | 3 -
package/i2pd/i2pd.mk | 3 -
package/ifupdown-scripts/ifupdown-scripts.mk | 3 -
package/igd2-for-linux/igd2-for-linux.mk | 3 -
package/inadyn/inadyn.mk | 3 -
.../input-event-daemon/input-event-daemon.mk | 3 -
package/irqbalance/irqbalance.mk | 3 -
package/iucode-tool/iucode-tool.mk | 3 -
package/kodi/kodi.mk | 5 -
package/lighttpd/lighttpd.mk | 6 -
.../linuxptp/linuxptp-system-clock.service | 1 -
package/linuxptp/linuxptp.mk | 3 -
package/lldpd/lldpd.mk | 6 -
package/mariadb/mariadb.mk | 3 -
package/mender/mender.mk | 3 -
package/mini-snmpd/mini-snmpd.mk | 3 -
package/minidlna/minidlna.mk | 5 -
package/minissdpd/minissdpd.mk | 3 -
package/mosquitto/mosquitto.mk | 3 -
package/motion/motion.mk | 3 -
package/netplug/netplug.mk | 3 -
package/network-manager/network-manager.mk | 7 -
package/nfs-utils/nfs-utils.mk | 16 --
package/nginx/nginx.mk | 5 -
package/nss-pam-ldapd/nss-pam-ldapd.mk | 3 -
package/ntp/ntp.mk | 3 -
package/ofono/ofono.mk | 6 -
package/olsr/olsr.mk | 3 -
package/openntpd/openntpd.mk | 3 -
package/openssh/openssh.mk | 3 -
package/openvmtools/openvmtools.mk | 3 -
package/oracle-mysql/oracle-mysql.mk | 3 -
package/pcsc-lite/pcsc-lite.mk | 6 -
package/php/php.mk | 3 -
package/postgresql/postgresql.mk | 3 -
package/proftpd/proftpd.mk | 3 -
package/psplash/psplash.mk | 6 -
package/ptpd/ptpd.mk | 3 -
package/ptpd2/ptpd2.mk | 3 -
package/pulseaudio/pulseaudio.mk | 3 -
package/python-web2py/python-web2py.mk | 3 -
package/rabbitmq-server/rabbitmq-server.mk | 5 -
package/redis/redis.mk | 3 -
package/rng-tools/rng-tools.mk | 3 -
package/rpcbind/rpcbind.mk | 3 -
package/rpi-userland/rpi-userland.mk | 3 -
package/rsyslog/rsyslog.mk | 14 --
package/rygel/rygel.mk | 3 -
package/sane-backends/sane-backends.mk | 6 -
package/squid/squid.mk | 3 -
package/sshguard/sshguard.mk | 3 -
package/supervisor/supervisor.mk | 3 -
package/suricata/suricata.mk | 3 -
.../systemd-bootchart/systemd-bootchart.mk | 6 -
.../0002-allow-an-empty-DefaultInstance.patch | 28 +++
package/systemd/80-buildroot.preset | 4 +
package/systemd/Config.in | 1 +
package/systemd/systemd.mk | 221 ++++++++++--------
package/tcf-agent/tcf-agent.mk | 3 -
package/thttpd/thttpd.mk | 3 -
package/ti-gfx/ti-gfx.mk | 3 -
package/tinyhttpd/tinyhttpd.mk | 3 -
package/transmission/transmission.mk | 3 -
package/triggerhappy/triggerhappy.mk | 3 -
package/upmpdcli/upmpdcli.mk | 3 -
.../wpa_supplicant/50-wpa_supplicant.preset | 4 +
package/wpa_supplicant/wpa_supplicant.mk | 2 +
90 files changed, 164 insertions(+), 431 deletions(-)
create mode 100644 package/systemd/0002-allow-an-empty-DefaultInstance.patch
create mode 100644 package/systemd/80-buildroot.preset
create mode 100644 package/wpa_supplicant/50-wpa_supplicant.preset
--
2.24.0.rc1
next reply other threads:[~2019-11-11 17:24 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-11 17:24 Jérémy Rosen [this message]
2019-11-11 17:24 ` [Buildroot] [PATCH v2 1/9] new recipe : host-systemd Jérémy Rosen
2019-12-05 11:01 ` Yann E. MORIN
2019-11-11 17:24 ` [Buildroot] [PATCH v2 2/9] use host-systemctl preset all to enable units Jérémy Rosen
2019-12-05 11:33 ` Yann E. MORIN
2019-12-05 13:07 ` Yann E. MORIN
2019-12-07 11:39 ` Jérémy ROSEN
2019-12-07 11:40 ` Jérémy ROSEN
2019-12-07 16:42 ` Yann E. MORIN
2019-11-11 17:24 ` [Buildroot] [PATCH v2 3/9] fix tty handling Jérémy Rosen
2019-12-05 11:25 ` Yann E. MORIN
2019-11-11 17:24 ` [Buildroot] [PATCH v2 4/9] fix trivial packages with buildroot-provided services Jérémy Rosen
2019-12-05 11:35 ` Yann E. MORIN
2019-11-11 17:24 ` [Buildroot] [PATCH v2 5/9] fix trivial cases, upstream-provided services Jérémy Rosen
2019-12-05 11:36 ` Yann E. MORIN
2019-11-11 17:24 ` [Buildroot] [PATCH v2 6/9] package/connman: adapt to preset-all Jérémy Rosen
2019-12-05 12:57 ` Yann E. MORIN
2019-12-07 12:19 ` Jérémy ROSEN
2019-11-11 17:24 ` [Buildroot] [PATCH v2 7/9] package/linuxptp " Jérémy Rosen
2019-12-05 12:59 ` Yann E. MORIN
2019-11-11 17:24 ` [Buildroot] [PATCH v2 8/9] package/network-manager: " Jérémy Rosen
2019-12-05 13:01 ` Yann E. MORIN
2019-12-05 22:29 ` Arnout Vandecappelle
2019-12-07 13:28 ` Jérémy ROSEN
2019-11-11 17:24 ` [Buildroot] [PATCH v2 9/9] package/wpa_supplicant: adapt for preset-all Jérémy Rosen
2019-12-05 13:04 ` Yann E. MORIN
2019-12-07 13:31 ` Jérémy ROSEN
2019-11-19 9:58 ` [Buildroot] [PATCH v2 0/9] use host-systemd to enable units Jérémy ROSEN
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191111172443.6874-1-jeremy.rosen@smile.fr \
--to=jeremy.rosen@smile.fr \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.