> This patch enables channel switch support on mt76 usb interfaces.
> 

Hi Markus,

I was thinking about it, but since usb does not support DFS what is the purpose
of CSA in this case?

Regards,
Lorenzo

> Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
> ---
>  drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c | 7 +++++++
>  drivers/net/wireless/mediatek/mt76/mt76x02_util.c     | 2 +-
>  drivers/net/wireless/mediatek/mt76/mt76x2/usb_main.c  | 5 +++++
>  3 files changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
> index aedab4cc8d40..32e6c37aa80d 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
> @@ -179,6 +179,12 @@ static void mt76x02u_pre_tbtt_work(struct work_struct *work)
>  
>  	mt76x02_resync_beacon_timer(dev);
>  
> +	mt76_csa_check(&dev->mt76);
> +	if (dev->mt76.csa_complete) {
> +		mt76_csa_finish(&dev->mt76);
> +		goto out;
> +	}
> +
>  	mt76x02_mac_set_beacon_prepare(dev);
>  
>  	ieee80211_iterate_active_interfaces(mt76_hw(dev),
> @@ -195,6 +201,7 @@ static void mt76x02u_pre_tbtt_work(struct work_struct *work)
>  
>  	mt76x02_mac_set_beacon_finish(dev);
>  
> +out:
>  	mt76x02u_restart_pre_tbtt_timer(dev);
>  }
>  
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
> index 414b22399d93..3f95e5b24e1d 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
> @@ -174,7 +174,6 @@ void mt76x02_init_device(struct mt76x02_dev *dev)
>  		wiphy->reg_notifier = mt76x02_regd_notifier;
>  		wiphy->iface_combinations = mt76x02_if_comb;
>  		wiphy->n_iface_combinations = ARRAY_SIZE(mt76x02_if_comb);
> -		wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
>  
>  		/* init led callbacks */
>  		if (IS_ENABLED(CONFIG_MT76_LEDS)) {
> @@ -184,6 +183,7 @@ void mt76x02_init_device(struct mt76x02_dev *dev)
>  		}
>  	}
>  
> +	wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
>  	wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_VHT_IBSS);
>  
>  	hw->sta_data_size = sizeof(struct mt76x02_sta);
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/usb_main.c b/drivers/net/wireless/mediatek/mt76/mt76x2/usb_main.c
> index eb73cb856c81..2f2c39a6a9e6 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x2/usb_main.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x2/usb_main.c
> @@ -100,6 +100,10 @@ mt76x2u_config(struct ieee80211_hw *hw, u32 changed)
>  	return err;
>  }
>  
> +void mt76x2u_channel_switch_beacon(struct ieee80211_hw *hw,
> +				   struct ieee80211_vif *vif,
> +				   struct cfg80211_chan_def *chandef) {}
> +
>  const struct ieee80211_ops mt76x2u_ops = {
>  	.tx = mt76x02_tx,
>  	.start = mt76x2u_start,
> @@ -121,4 +125,5 @@ const struct ieee80211_ops mt76x2u_ops = {
>  	.get_survey = mt76_get_survey,
>  	.set_tim = mt76_set_tim,
>  	.release_buffered_frames = mt76_release_buffered_frames,
> +	.channel_switch_beacon = mt76x2u_channel_switch_beacon,
>  };
> -- 
> 2.24.0
>