From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Glass Date: Thu, 21 Nov 2019 21:18:22 -0700 Subject: [U-Boot] [PATCH v4 057/100] x86: Add an option to control the position of SPL In-Reply-To: <20191122041905.224686-1-sjg@chromium.org> References: <20191122041905.224686-1-sjg@chromium.org> Message-ID: <20191122041905.224686-41-sjg@chromium.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de For Apollo Lake SPL is run from CAR (cache-as-RAM) which is in a different location from where SPL must be placed in ROM. In other words, although SPL runs before SDRAM is set up, it is not execute-in-place (XIP). Add a Kconfig option for the ROM position. Signed-off-by: Simon Glass --- Changes in v4: - apollolake -> Apollo Lake Changes in v3: - Add SPL condition to the option Changes in v2: None arch/x86/Kconfig | 5 +++++ arch/x86/dts/u-boot.dtsi | 4 ++-- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e105fda2f2..ae96e69f86 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -904,4 +904,9 @@ config X86_OFFSET_U_BOOT depends on HAVE_SYS_TEXT_BASE default SYS_TEXT_BASE +config X86_OFFSET_SPL + hex "Offset of SPL in ROM image" + depends on SPL && X86 + default SPL_TEXT_BASE + endmenu diff --git a/arch/x86/dts/u-boot.dtsi b/arch/x86/dts/u-boot.dtsi index d84c64880a..fad3e7c951 100644 --- a/arch/x86/dts/u-boot.dtsi +++ b/arch/x86/dts/u-boot.dtsi @@ -45,7 +45,7 @@ }; #endif u-boot-spl { - offset = ; + offset = ; }; u-boot-spl-dtb { }; @@ -54,7 +54,7 @@ }; #elif defined(CONFIG_SPL) u-boot-spl-with-ucode-ptr { - offset = ; + offset = ; }; u-boot-dtb-with-ucode2 { type = "u-boot-dtb-with-ucode"; -- 2.24.0.432.g9d3f5f5b63-goog