All of lore.kernel.org
 help / color / mirror / Atom feed
From: Max Gurtovoy <maxg@mellanox.com>
To: linux-nvme@lists.infradead.org, kbusch@kernel.org, hch@lst.de,
	sagi@grimberg.me, martin.petersen@oracle.com
Cc: axboe@kernel.dk, vladimirk@mellanox.com, shlomin@mellanox.com,
	israelr@mellanox.com, idanb@mellanox.com, oren@mellanox.com,
	maxg@mellanox.com
Subject: [PATCH 01/16] nvme: Introduce namespace features flag
Date: Mon,  2 Dec 2019 16:47:57 +0200	[thread overview]
Message-ID: <20191202144812.147686-3-maxg@mellanox.com> (raw)
In-Reply-To: <20191202144812.147686-1-maxg@mellanox.com>

From: Israel Rukshin <israelr@mellanox.com>

This patch is a preparation for adding PI support for fabrics drivers
that will use an extended LBA format for metadata.

Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
---
 drivers/nvme/host/core.c | 40 +++++++++++++++++++++++++++-------------
 drivers/nvme/host/nvme.h |  6 +++++-
 2 files changed, 32 insertions(+), 14 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index e6ee34376c5e..2e027627ab58 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -209,11 +209,6 @@ static int nvme_delete_ctrl_sync(struct nvme_ctrl *ctrl)
 	return ret;
 }
 
-static inline bool nvme_ns_has_pi(struct nvme_ns *ns)
-{
-	return ns->pi_type && ns->ms == sizeof(struct t10_pi_tuple);
-}
-
 static blk_status_t nvme_error_status(u16 status)
 {
 	switch (status & 0x7ff) {
@@ -473,6 +468,7 @@ static inline void nvme_clear_nvme_request(struct request *req)
 	if (!(req->rq_flags & RQF_DONTPREP)) {
 		nvme_req(req)->retries = 0;
 		nvme_req(req)->flags = 0;
+		nvme_req(req)->has_pi = false;
 		req->rq_flags |= RQF_DONTPREP;
 	}
 }
@@ -706,6 +702,7 @@ static inline blk_status_t nvme_setup_rw(struct nvme_ns *ns,
 		nvme_assign_write_stream(ctrl, req, &control, &dsmgmt);
 
 	if (ns->ms) {
+		nvme_req(req)->has_pi = ns->features & NVME_NS_DIF_SUPPORTED;
 		/*
 		 * If formated with metadata, the block layer always provides a
 		 * metadata buffer if CONFIG_BLK_DEV_INTEGRITY is enabled.  Else
@@ -713,7 +710,7 @@ static inline blk_status_t nvme_setup_rw(struct nvme_ns *ns,
 		 * namespace capacity to zero to prevent any I/O.
 		 */
 		if (!blk_integrity_rq(req)) {
-			if (WARN_ON_ONCE(!nvme_ns_has_pi(ns)))
+			if (WARN_ON_ONCE(!nvme_req(req)->has_pi))
 				return BLK_STS_NOTSUPP;
 			control |= NVME_RW_PRINFO_PRACT;
 		}
@@ -1271,7 +1268,7 @@ static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio)
 	meta_len = (io.nblocks + 1) * ns->ms;
 	metadata = (void __user *)(uintptr_t)io.metadata;
 
-	if (ns->ext) {
+	if (ns->features & NVME_NS_EXT_LBAS) {
 		length += meta_len;
 		meta_len = 0;
 	} else if (meta_len) {
@@ -1799,10 +1796,10 @@ static void nvme_update_disk_info(struct gendisk *disk,
 	blk_queue_io_min(disk->queue, phys_bs);
 	blk_queue_io_opt(disk->queue, io_opt);
 
-	if (ns->ms && !ns->ext &&
-	    (ns->ctrl->ops->flags & NVME_F_METADATA_SUPPORTED))
+	if (ns->features & NVME_NS_DIX_SUPPORTED)
 		nvme_init_integrity(disk, ns->ms, ns->pi_type);
-	if ((ns->ms && !nvme_ns_has_pi(ns) && !blk_get_integrity(disk)) ||
+	if ((ns->ms && !(ns->features & NVME_NS_DIF_SUPPORTED) &&
+	     !blk_get_integrity(disk)) ||
 	    ns->lba_shift > PAGE_SHIFT)
 		capacity = 0;
 
@@ -1832,12 +1829,29 @@ static void __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id)
 		ns->lba_shift = 9;
 	ns->noiob = le16_to_cpu(id->noiob);
 	ns->ms = le16_to_cpu(id->lbaf[id->flbas & NVME_NS_FLBAS_LBA_MASK].ms);
-	ns->ext = ns->ms && (id->flbas & NVME_NS_FLBAS_META_EXT);
+	ns->features = 0;
 	/* the PI implementation requires metadata equal t10 pi tuple size */
-	if (ns->ms == sizeof(struct t10_pi_tuple))
+	if (ns->ms == sizeof(struct t10_pi_tuple)) {
 		ns->pi_type = id->dps & NVME_NS_DPS_PI_MASK;
-	else
+		if (ns->pi_type)
+			ns->features |= NVME_NS_DIF_SUPPORTED;
+	} else {
 		ns->pi_type = 0;
+	}
+
+	if (ns->ms) {
+		if (id->flbas & NVME_NS_FLBAS_META_EXT)
+			ns->features |= NVME_NS_EXT_LBAS;
+
+		/*
+		 * For PCI, Extended logical block will be generated by the
+		 * controller.
+		 */
+		if (ns->ctrl->ops->flags & NVME_F_METADATA_SUPPORTED) {
+			if (!(ns->features & NVME_NS_EXT_LBAS))
+				ns->features |= NVME_NS_DIX_SUPPORTED;
+		}
+	}
 
 	if (ns->noiob)
 		nvme_set_chunk_size(ns);
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 1024fec7914c..72473902f364 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -139,6 +139,7 @@ struct nvme_request {
 	u8			flags;
 	u16			status;
 	struct nvme_ctrl	*ctrl;
+	bool			has_pi;
 };
 
 /*
@@ -381,8 +382,11 @@ struct nvme_ns {
 	u16 ms;
 	u16 sgs;
 	u32 sws;
-	bool ext;
 	u8 pi_type;
+	unsigned long features;
+#define NVME_NS_EXT_LBAS	(1 << 0)
+#define NVME_NS_DIX_SUPPORTED	(1 << 1)
+#define NVME_NS_DIF_SUPPORTED	(1 << 2)
 	unsigned long flags;
 #define NVME_NS_REMOVING	0
 #define NVME_NS_DEAD     	1
-- 
2.16.3


_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

  parent reply	other threads:[~2019-12-02 14:51 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-02 14:47 [PATCH 00/16 V2] nvme-rdma/nvmet-rdma: Add metadata/T10-PI support Max Gurtovoy
2019-12-02 14:47 ` [PATCH] nvme-cli/fabrics: Add pi_enable param to connect cmd Max Gurtovoy
2019-12-02 14:47 ` Max Gurtovoy [this message]
2019-12-04  8:41   ` [PATCH 01/16] nvme: Introduce namespace features flag Christoph Hellwig
2019-12-02 14:47 ` [PATCH 02/16] nvme: Enforce extended LBA format for fabrics metadata Max Gurtovoy
2019-12-02 14:47 ` [PATCH 03/16] nvme: Introduce max_integrity_segments ctrl attribute Max Gurtovoy
2019-12-02 14:48 ` [PATCH 04/16] nvme-fabrics: Allow user enabling metadata/T10-PI support Max Gurtovoy
2019-12-02 14:48 ` [PATCH 05/16] nvme: Introduce NVME_INLINE_PROT_SG_CNT Max Gurtovoy
2019-12-02 14:48 ` [PATCH 06/16] nvme-rdma: Introduce nvme_rdma_sgl structure Max Gurtovoy
2019-12-02 14:48 ` [PATCH 07/16] nvme-rdma: Add metadata/T10-PI support Max Gurtovoy
2020-01-22 21:57   ` James Smart
2020-01-23  9:59     ` Max Gurtovoy
2020-01-23 15:34       ` James Smart
2020-01-23 18:52         ` James Smart
2019-12-02 14:48 ` [PATCH 08/16] block: Add a BIP_MAPPED_INTEGRITY check to complete_fn Max Gurtovoy
2019-12-02 14:48 ` [PATCH 09/16] nvmet: Prepare metadata request Max Gurtovoy
2019-12-02 14:48 ` [PATCH 10/16] nvmet: Add metadata characteristics for a namespace Max Gurtovoy
2019-12-02 14:48 ` [PATCH 11/16] nvmet: Rename nvmet_rw_len to nvmet_rw_data_len Max Gurtovoy
2019-12-02 14:48 ` [PATCH 12/16] nvmet: Rename nvmet_check_data_len to nvmet_check_transfer_len Max Gurtovoy
2019-12-02 14:48 ` [PATCH 13/16] nvme: Add Metadata Capabilities enumerations Max Gurtovoy
2019-12-02 14:48 ` [PATCH 14/16] nvmet: Add metadata/T10-PI support Max Gurtovoy
2019-12-02 14:48 ` [PATCH 15/16] nvmet: Add metadata support for block devices Max Gurtovoy
2019-12-02 14:48 ` [PATCH 16/16] nvmet-rdma: Add metadata/T10-PI support Max Gurtovoy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191202144812.147686-3-maxg@mellanox.com \
    --to=maxg@mellanox.com \
    --cc=axboe@kernel.dk \
    --cc=hch@lst.de \
    --cc=idanb@mellanox.com \
    --cc=israelr@mellanox.com \
    --cc=kbusch@kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=martin.petersen@oracle.com \
    --cc=oren@mellanox.com \
    --cc=sagi@grimberg.me \
    --cc=shlomin@mellanox.com \
    --cc=vladimirk@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.