From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Seiderer Date: Tue, 3 Dec 2019 21:16:49 +0100 Subject: [Buildroot] [PATCHv2 2/2] configs: add raspberrypi4 64bits defconfig In-Reply-To: <20191203132658.863709-2-arthur.courtel@smile.fr> References: <20191203132658.863709-1-arthur.courtel@smile.fr> <20191203132658.863709-2-arthur.courtel@smile.fr> Message-ID: <20191203211649.26f4425a@gmx.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello Arthur, On Tue, 3 Dec 2019 14:26:58 +0100, Arthur Courtel wrote: > This configuration builds a 64bit image for RaspberryPi 4. > > Signed-off-by: Arthur Courtel > --- > .../raspberrypi/genimage-raspberrypi4-64.cfg | 30 +++++++++++++++ > board/raspberrypi4-64 | 1 + > configs/raspberrypi4_64_defconfig | 37 +++++++++++++++++++ > 3 files changed, 68 insertions(+) > create mode 100644 board/raspberrypi/genimage-raspberrypi4-64.cfg > create mode 120000 board/raspberrypi4-64 > create mode 100644 configs/raspberrypi4_64_defconfig > > diff --git a/board/raspberrypi/genimage-raspberrypi4-64.cfg b/board/raspberrypi/genimage-raspberrypi4-64.cfg > new file mode 100644 > index 0000000000..3c480e98f0 > --- /dev/null > +++ b/board/raspberrypi/genimage-raspberrypi4-64.cfg > @@ -0,0 +1,30 @@ > +image boot.vfat { > + vfat { > + files = { > + "bcm2711-rpi-4-b.dtb", > + "rpi-firmware/cmdline.txt", > + "rpi-firmware/config.txt", > + "rpi-firmware/fixup4.dat", > + "rpi-firmware/start4.elf", > + "rpi-firmware/overlays", > + "Image" > + } > + } > + size = 32M > +} > + > +image sdcard.img { > + hdimage { > + } > + > + partition boot { > + partition-type = 0xC > + bootable = "true" > + image = "boot.vfat" > + } > + > + partition rootfs { > + partition-type = 0x83 > + image = "rootfs.ext4" > + } > +} > diff --git a/board/raspberrypi4-64 b/board/raspberrypi4-64 > new file mode 120000 > index 0000000000..fcdafc81ed > --- /dev/null > +++ b/board/raspberrypi4-64 > @@ -0,0 +1 @@ > +raspberrypi > \ No newline at end of file > diff --git a/configs/raspberrypi4_64_defconfig b/configs/raspberrypi4_64_defconfig > new file mode 100644 > index 0000000000..c88923d507 > --- /dev/null > +++ b/configs/raspberrypi4_64_defconfig > @@ -0,0 +1,37 @@ > +BR2_aarch64=y > +BR2_cortex_a72=y > + > +BR2_TOOLCHAIN_BUILDROOT_CXX=y > + > +BR2_SYSTEM_DHCP="eth0" > + > +# Linux headers same as kernel, a 4.19 series > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y > + > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,raspberrypi-kernel_1.20190819-1)/linux-raspberrypi-kernel_1.20190819-1.tar.gz" > +BR2_LINUX_KERNEL_DEFCONFIG="bcm2711" > + > +# Build the DTB from the kernel sources > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2711-rpi-4-b" No chance to test myself for pi4 (because of lack of hardware yet), but I believe BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT=y is needed for an 64-bit kernel, see [1] and [2] for pi3... Regards, Peter [1] https://git.buildroot.net/buildroot/commit/?id=2aa92335cdc5f71c2d09391dc49fcf3c7627d6f0 [2] https://git.buildroot.net/buildroot/commit/?id=e747d33bd9d319481a67a376c97e5100dd93f62a > + > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y > + > +BR2_PACKAGE_RPI_FIRMWARE=y > +BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y > + > +# Required tools to create the SD image > +BR2_PACKAGE_HOST_DOSFSTOOLS=y > +BR2_PACKAGE_HOST_GENIMAGE=y > +BR2_PACKAGE_HOST_MTOOLS=y > + > +# Filesystem / image > +BR2_TARGET_ROOTFS_EXT2=y > +BR2_TARGET_ROOTFS_EXT2_4=y > +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" > +# BR2_TARGET_ROOTFS_TAR is not set > +BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4-64/post-build.sh" > +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4-64/post-image.sh" > +BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay --aarch64"