From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeffy Chen Date: Thu, 5 Dec 2019 15:48:15 +0800 Subject: [PATCH 2/2] doc: rockchip: document packing second level loader with mkimage In-Reply-To: <20191205074815.31494-1-jeffy.chen@rock-chips.com> References: <20191205074815.31494-1-jeffy.chen@rock-chips.com> Message-ID: <20191205074815.31494-3-jeffy.chen@rock-chips.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add documentation about packing optional second level boot-loader with mkimage tool. Signed-off-by: Jeffy Chen --- doc/README.rockchip | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/doc/README.rockchip b/doc/README.rockchip index 67c14006a3..39dc9c5e9f 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -341,6 +341,12 @@ You can create the image via the following operations: cat firefly-rk3288/u-boot-dtb.bin >> out && \ sudo dd if=out of=/dev/sdc seek=64 +Or: + ./firefly-rk3288/tools/mkimage -n rk3288 -T rksd -d \ + firefly-rk3288/spl/u-boot-spl-dtb.bin:firefly-rk3288/u-boot-dtb.bin \ + out && \ + sudo dd if=out of=/dev/sdc seek=64 + If you have an HDMI cable attached you should see a video console. For evb_rk3036 board: @@ -348,6 +354,11 @@ For evb_rk3036 board: cat evb-rk3036/u-boot-dtb.bin >> out && \ sudo dd if=out of=/dev/sdc seek=64 +Or: + ./evb-rk3036/tools/mkimage -n rk3036 -T rksd -d \ + evb-rk3036/spl/u-boot-spl.bin:evb-rk3036/u-boot-dtb.bin out && \ + sudo dd if=out of=/dev/sdc seek=64 + Note: rk3036 SDMMC and debug uart use the same iomux, so if you boot from SD, the debug uart must be disabled -- 2.11.0