From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Glass Date: Fri, 6 Dec 2019 21:42:32 -0700 Subject: [PATCH v6 059/102] x86: Don't repeat microcode in U-Boot if not needed In-Reply-To: <20191207044315.51770-1-sjg@chromium.org> References: <20191207044315.51770-1-sjg@chromium.org> Message-ID: <20191206213936.v6.59.I7e4d9db0141141a71865369b131bc54d8ca23985@changeid> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de At present if SPL sets up the microcode then it is still included in U-Boot as well. This is wasteful as microcode is large. Adjust the logic in the image to prevent this. Reviewed-by: Bin Meng Signed-off-by: Simon Glass --- Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None arch/x86/dts/u-boot.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/x86/dts/u-boot.dtsi b/arch/x86/dts/u-boot.dtsi index 5ebff4f407..e0cca58640 100644 --- a/arch/x86/dts/u-boot.dtsi +++ b/arch/x86/dts/u-boot.dtsi @@ -63,9 +63,16 @@ offset = ; }; #else +# ifdef CONFIG_SPL + u-boot { + offset = ; + }; +# else + /* If there is no SPL then we need to put microcode in U-Boot */ u-boot-with-ucode-ptr { offset = ; }; +# endif #endif #ifdef CONFIG_HAVE_MICROCODE u-boot-dtb-with-ucode { -- 2.24.0.393.g34dc348eaf-goog