All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: dri-devel@lists.freedesktop.org
Cc: Boris Brezillon <bbrezillon@kernel.org>,
	Sean Paul <sean@poorly.run>,
	Sebastian Reichel <sebastian.reichel@collabora.com>,
	Tomi Valkeinen <tomi.valkeinen@ti.com>,
	Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH v3 27/50] drm/omap: hdmi5: Rework EDID read to isolate data read
Date: Wed, 11 Dec 2019 00:57:27 +0200	[thread overview]
Message-ID: <20191210225750.15709-28-laurent.pinchart@ideasonboard.com> (raw)
In-Reply-To: <20191210225750.15709-1-laurent.pinchart@ideasonboard.com>

In preparation of adding DRM bridge support to the hdmi5 encoder code,
rework the EDID read to isolate data read.

The hdmi_read_edid() function is the main entry point. It performs all
initialisation steps required prior to reading the EDID (such as
ensuring the device is powered on), as well as corresponding cleanup
steps afterwards. EDID read itself is handled by hdmi_read_edid_data()
that calls the hdmi5_core_ddc_read() function to read individual blocks.

This new code architecture will allow reusing hdmi_read_edid() and
hdmi5_core_ddc_read() for the drm_bridge EDID read implementation, while
swapping out hdmi_read_edid_data() for the DRM drm_do_get_edid()
function.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
Changes since v2:

- Expand commit message
---
 drivers/gpu/drm/omapdrm/dss/hdmi5.c      | 89 ++++++++++++++----------
 drivers/gpu/drm/omapdrm/dss/hdmi5_core.c | 48 +++----------
 drivers/gpu/drm/omapdrm/dss/hdmi5_core.h |  5 +-
 3 files changed, 65 insertions(+), 77 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5.c b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
index 99720dfc5769..2b02b0a11696 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi5.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
@@ -271,30 +271,6 @@ static int hdmi_dump_regs(struct seq_file *s, void *p)
 	return 0;
 }
 
-static int read_edid(struct omap_hdmi *hdmi, u8 *buf, int len)
-{
-	int r;
-	int idlemode;
-
-	mutex_lock(&hdmi->lock);
-
-	r = hdmi_runtime_get(hdmi);
-	BUG_ON(r);
-
-	idlemode = REG_GET(hdmi->wp.base, HDMI_WP_SYSCONFIG, 3, 2);
-	/* No-idle mode */
-	REG_FLD_MOD(hdmi->wp.base, HDMI_WP_SYSCONFIG, 1, 3, 2);
-
-	r = hdmi5_read_edid(&hdmi->core,  buf, len);
-
-	REG_FLD_MOD(hdmi->wp.base, HDMI_WP_SYSCONFIG, idlemode, 3, 2);
-
-	hdmi_runtime_put(hdmi);
-	mutex_unlock(&hdmi->lock);
-
-	return r;
-}
-
 static void hdmi_start_audio_stream(struct omap_hdmi *hd)
 {
 	REG_FLD_MOD(hd->wp.base, HDMI_WP_SYSCONFIG, 1, 3, 2);
@@ -412,32 +388,73 @@ static void hdmi_disconnect(struct omap_dss_device *src,
 
 #define MAX_EDID	512
 
-static struct edid *hdmi_read_edid(struct omap_dss_device *dssdev)
+static struct edid *hdmi_read_edid_data(struct hdmi_core_data *core)
 {
-	struct omap_hdmi *hdmi = dssdev_to_hdmi(dssdev);
-	bool need_enable;
+	int max_ext_blocks = 3;
+	int r, n, i;
 	u8 *edid;
-	int r;
 
 	edid = kzalloc(MAX_EDID, GFP_KERNEL);
 	if (!edid)
 		return NULL;
 
+	r = hdmi5_core_ddc_read(core, edid, 0, EDID_LENGTH);
+	if (r)
+		goto error;
+
+	n = edid[0x7e];
+
+	if (n > max_ext_blocks)
+		n = max_ext_blocks;
+
+	for (i = 1; i <= n; i++) {
+		r = hdmi5_core_ddc_read(core, edid + i * EDID_LENGTH, i,
+					EDID_LENGTH);
+		if (r)
+			goto error;
+	}
+
+	return (struct edid *)edid;
+
+error:
+	kfree(edid);
+	return NULL;
+}
+
+static struct edid *hdmi_read_edid(struct omap_dss_device *dssdev)
+{
+	struct omap_hdmi *hdmi = dssdev_to_hdmi(dssdev);
+	struct edid *edid;
+	bool need_enable;
+	int idlemode;
+	int r;
+
 	need_enable = hdmi->core_enabled == false;
 
 	if (need_enable) {
 		r = hdmi_core_enable(hdmi);
-		if (r) {
-			kfree(edid);
+		if (r)
 			return NULL;
-		}
 	}
 
-	r = read_edid(hdmi, edid, MAX_EDID);
-	if (r < 0) {
-		kfree(edid);
-		edid = NULL;
-	}
+	mutex_lock(&hdmi->lock);
+	r = hdmi_runtime_get(hdmi);
+	BUG_ON(r);
+
+	idlemode = REG_GET(hdmi->wp.base, HDMI_WP_SYSCONFIG, 3, 2);
+	/* No-idle mode */
+	REG_FLD_MOD(hdmi->wp.base, HDMI_WP_SYSCONFIG, 1, 3, 2);
+
+	hdmi5_core_ddc_init(&hdmi->core);
+
+	edid = hdmi_read_edid_data(&hdmi->core);
+
+	hdmi5_core_ddc_uninit(&hdmi->core);
+
+	REG_FLD_MOD(hdmi->wp.base, HDMI_WP_SYSCONFIG, idlemode, 3, 2);
+
+	hdmi_runtime_put(hdmi);
+	mutex_unlock(&hdmi->lock);
 
 	if (need_enable)
 		hdmi_core_disable(hdmi);
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c
index ff4d35c8771f..7dd587035160 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c
@@ -23,7 +23,7 @@
 
 #include "hdmi5_core.h"
 
-static void hdmi_core_ddc_init(struct hdmi_core_data *core)
+void hdmi5_core_ddc_init(struct hdmi_core_data *core)
 {
 	void __iomem *base = core->base;
 	const unsigned long long iclk = 266000000;	/* DSS L3 ICLK */
@@ -102,7 +102,7 @@ static void hdmi_core_ddc_init(struct hdmi_core_data *core)
 	REG_FLD_MOD(base, HDMI_CORE_I2CM_INT, 0x0, 2, 2);
 }
 
-static void hdmi_core_ddc_uninit(struct hdmi_core_data *core)
+void hdmi5_core_ddc_uninit(struct hdmi_core_data *core)
 {
 	void __iomem *base = core->base;
 
@@ -112,14 +112,14 @@ static void hdmi_core_ddc_uninit(struct hdmi_core_data *core)
 	REG_FLD_MOD(base, HDMI_CORE_I2CM_INT, 0x1, 2, 2);
 }
 
-static int hdmi_core_ddc_edid(struct hdmi_core_data *core, u8 *pedid, u8 ext)
+int hdmi5_core_ddc_read(void *data, u8 *buf, unsigned int block, size_t len)
 {
+	struct hdmi_core_data *core = data;
 	void __iomem *base = core->base;
 	u8 cur_addr;
-	char checksum = 0;
 	const int retries = 1000;
-	u8 seg_ptr = ext / 2;
-	u8 edidbase = ((ext % 2) * 0x80);
+	u8 seg_ptr = block / 2;
+	u8 edidbase = ((block % 2) * EDID_LENGTH);
 
 	REG_FLD_MOD(base, HDMI_CORE_I2CM_SEGPTR, seg_ptr, 7, 0);
 
@@ -127,7 +127,7 @@ static int hdmi_core_ddc_edid(struct hdmi_core_data *core, u8 *pedid, u8 ext)
 	 * TODO: We use polling here, although we probably should use proper
 	 * interrupts.
 	 */
-	for (cur_addr = 0; cur_addr < 128; ++cur_addr) {
+	for (cur_addr = 0; cur_addr < len; ++cur_addr) {
 		int i;
 
 		/* clear ERROR and DONE */
@@ -164,45 +164,13 @@ static int hdmi_core_ddc_edid(struct hdmi_core_data *core, u8 *pedid, u8 ext)
 			return -EIO;
 		}
 
-		pedid[cur_addr] = REG_GET(base, HDMI_CORE_I2CM_DATAI, 7, 0);
-		checksum += pedid[cur_addr];
+		buf[cur_addr] = REG_GET(base, HDMI_CORE_I2CM_DATAI, 7, 0);
 	}
 
 	return 0;
 
 }
 
-int hdmi5_read_edid(struct hdmi_core_data *core, u8 *edid, int len)
-{
-	int r, n, i;
-	int max_ext_blocks = (len / 128) - 1;
-
-	if (len < 128)
-		return -EINVAL;
-
-	hdmi_core_ddc_init(core);
-
-	r = hdmi_core_ddc_edid(core, edid, 0);
-	if (r)
-		goto out;
-
-	n = edid[0x7e];
-
-	if (n > max_ext_blocks)
-		n = max_ext_blocks;
-
-	for (i = 1; i <= n; i++) {
-		r = hdmi_core_ddc_edid(core, edid + i * EDID_LENGTH, i);
-		if (r)
-			goto out;
-	}
-
-out:
-	hdmi_core_ddc_uninit(core);
-
-	return r ? r : len;
-}
-
 void hdmi5_core_dump(struct hdmi_core_data *core, struct seq_file *s)
 {
 
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.h b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.h
index f10b8a283011..65eadefdb3f9 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.h
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.h
@@ -281,7 +281,10 @@ struct csc_table {
 	u16 c1, c2, c3, c4;
 };
 
-int hdmi5_read_edid(struct hdmi_core_data *core, u8 *edid, int len);
+void hdmi5_core_ddc_init(struct hdmi_core_data *core);
+int hdmi5_core_ddc_read(void *data, u8 *buf, unsigned int block, size_t len);
+void hdmi5_core_ddc_uninit(struct hdmi_core_data *core);
+
 void hdmi5_core_dump(struct hdmi_core_data *core, struct seq_file *s);
 int hdmi5_core_handle_irqs(struct hdmi_core_data *core);
 void hdmi5_configure(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2019-12-10 22:58 UTC|newest]

Thread overview: 109+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-10 22:57 [PATCH v3 00/50] drm/omap: Replace custom display drivers with drm_bridge and drm_panel Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 01/50] video: hdmi: Change return type of hdmi_avi_infoframe_init() to void Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 02/50] drm/connector: Add helper to get a connector type name Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 03/50] drm/edid: Add flag to drm_display_info to identify HDMI sinks Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 04/50] drm/bridge: Add connector-related bridge operations and data Laurent Pinchart
2019-12-11 11:01   ` Mihail Atanassov
2019-12-12 23:15     ` Laurent Pinchart
2019-12-12 23:24       ` Laurent Pinchart
2019-12-15 10:22   ` Sam Ravnborg
2019-12-18  1:16     ` Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 05/50] drm/bridge: Extend bridge API to disable connector creation Laurent Pinchart
2019-12-17 12:12   ` Tomi Valkeinen
2019-12-18  1:17     ` Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 06/50] drm/bridge: dumb-vga-dac: Rename internal symbols to simple-bridge Laurent Pinchart
2019-12-11 21:13   ` Sam Ravnborg
2019-12-11 23:42     ` Laurent Pinchart
2019-12-12  8:58       ` Maxime Ripard
2019-12-10 22:57 ` [PATCH v3 07/50] drm/bridge: dumb-vga-dac: Rename driver " Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 08/50] drm/bridge: simple-bridge: Add support for non-VGA bridges Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 09/50] drm/bridge: simple-bridge: Add support for enable GPIO Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 10/50] drm/bridge: simple-bridge: Add support for the TI OP362 Laurent Pinchart
2019-12-18  7:04   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 11/50] drm/bridge: Add bridge driver for display connectors Laurent Pinchart
2019-12-15 12:03   ` Sam Ravnborg
2019-12-18  1:48     ` Laurent Pinchart
2019-12-16  9:07   ` Boris Brezillon
2019-12-16 13:11   ` Tomi Valkeinen
2019-12-18  1:45     ` Laurent Pinchart
2019-12-18  6:57       ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 12/50] drm/bridge: Add driver for the TI TPD12S015 HDMI level shifter Laurent Pinchart
2019-12-16 13:06   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 13/50] drm/bridge: panel: Implement bridge connector operations Laurent Pinchart
2019-12-16  9:09   ` Boris Brezillon
2019-12-10 22:57 ` [PATCH v3 14/50] drm/bridge: tfp410: Replace manual connector handling with bridge Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 15/50] drm/bridge: tfp410: Allow operation without drm_connector Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 16/50] drm: Add helper to create a connector for a chain of bridges Laurent Pinchart
2019-12-16  9:21   ` Boris Brezillon
2019-12-10 22:57 ` [PATCH v3 17/50] drm/omap: Fix possible object reference leak Laurent Pinchart
2019-12-17  7:28   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 18/50] drm/omap: dss: Cleanup DSS ports on initialisation failure Laurent Pinchart
2019-12-17  7:49   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 19/50] drm/omap: Simplify HDMI mode and infoframe configuration Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 20/50] drm/omap: Factor out display type to connector type conversion Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 21/50] drm/omap: Use the drm_panel_bridge API Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 22/50] drm/omap: dss: Fix output next device lookup in DT Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 23/50] drm/omap: Add infrastructure to support drm_bridge local to DSS outputs Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 24/50] drm/omap: dss: Make omap_dss_device_ops optional Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 25/50] drm/omap: hdmi: Allocate EDID in the .read_edid() operation Laurent Pinchart
2019-12-10 22:57 ` [PATCH v3 26/50] drm/omap: hdmi4: Rework EDID read to isolate data read Laurent Pinchart
2019-12-17 12:25   ` Tomi Valkeinen
2019-12-10 22:57 ` Laurent Pinchart [this message]
2019-12-17 12:36   ` [PATCH v3 27/50] drm/omap: hdmi5: " Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 28/50] drm/omap: hdmi4: Register a drm_bridge for EDID read Laurent Pinchart
2019-12-17 12:41   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 29/50] drm/omap: hdmi5: " Laurent Pinchart
2019-12-17 12:41   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 30/50] drm/omap: hdmi4: Move mode set, enable and disable operations to bridge Laurent Pinchart
2019-12-18 11:26   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 31/50] drm/omap: hdmi5: " Laurent Pinchart
2019-12-18 11:28   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 32/50] drm/omap: hdmi4: Implement drm_bridge .hpd_notify() operation Laurent Pinchart
2019-12-18 11:47   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 33/50] drm/omap: dss: Remove .set_hdmi_mode() and .set_infoframe() operations Laurent Pinchart
2019-12-18 11:50   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 34/50] drm/omap: venc: Register a drm_bridge Laurent Pinchart
2019-12-18 11:53   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 35/50] drm/omap: Create connector for bridges Laurent Pinchart
2019-12-15 10:00   ` Sam Ravnborg
2019-12-18  1:56     ` Laurent Pinchart
2019-12-18 12:55   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 36/50] drm/omap: Switch the HDMI and VENC outputs to drm_bridge Laurent Pinchart
2019-12-18 13:22   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 37/50] drm/omap: Remove HPD, detect and EDID omapdss operations Laurent Pinchart
2019-12-19  8:25   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 38/50] drm/omap: hdmi: Remove omap_dss_device operations Laurent Pinchart
2019-12-19  8:26   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 39/50] drm/omap: venc: " Laurent Pinchart
2019-12-19  8:27   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 40/50] drm/omap: hdmi4: Simplify EDID read Laurent Pinchart
2019-12-19  8:28   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 41/50] drm/omap: hdmi5: " Laurent Pinchart
2019-12-19  8:30   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 42/50] drm/omap: dpi: Sort includes alphabetically Laurent Pinchart
2019-12-19  8:54   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 43/50] drm/omap: dpi: Reorder functions in sections Laurent Pinchart
2019-12-19  8:56   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 44/50] drm/omap: dpi: Simplify clock setting API Laurent Pinchart
2019-12-19  9:01   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 45/50] drm/omap: dpi: Register a drm_bridge Laurent Pinchart
2019-12-19  9:21   ` Tomi Valkeinen
2019-12-19  9:40     ` Laurent Pinchart
2019-12-19 10:01       ` Tomi Valkeinen
2019-12-19 10:03         ` Laurent Pinchart
2019-12-19 10:15           ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 46/50] drm/omap: sdi: Sort includes alphabetically Laurent Pinchart
2019-12-19  9:04   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 47/50] drm/omap: sdi: Register a drm_bridge Laurent Pinchart
2019-12-19  9:27   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 48/50] drm/omap: dss: Remove unused omap_dss_device operations Laurent Pinchart
2019-12-19  9:28   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 49/50] drm/omap: dss: Inline the omapdss_display_get() function Laurent Pinchart
2019-12-19  9:31   ` Tomi Valkeinen
2019-12-10 22:57 ` [PATCH v3 50/50] drm/omap: dss: Remove unused omapdss_of_find_connected_device() function Laurent Pinchart
2019-12-19  9:31   ` Tomi Valkeinen
2019-12-15 12:27 ` [PATCH v3 00/50] drm/omap: Replace custom display drivers with drm_bridge and drm_panel Sam Ravnborg
2019-12-18  2:03   ` Laurent Pinchart
2019-12-18  7:07     ` Tomi Valkeinen
2019-12-18 14:46       ` Laurent Pinchart
2019-12-18 15:27         ` Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191210225750.15709-28-laurent.pinchart@ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=bbrezillon@kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=sam@ravnborg.org \
    --cc=sean@poorly.run \
    --cc=sebastian.reichel@collabora.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.