All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 05/34] aspeed: Add a DRAM memory region at the SoC level
Date: Mon, 16 Dec 2019 11:08:35 +0000	[thread overview]
Message-ID: <20191216110904.30815-6-peter.maydell@linaro.org> (raw)
In-Reply-To: <20191216110904.30815-1-peter.maydell@linaro.org>

From: Cédric Le Goater <clg@kaod.org>

Currently, we link the DRAM memory region to the FMC model (for DMAs)
through a property alias at the SoC level. The I2C model will need a
similar region for DMA support, add a DRAM region property at the SoC
level for both model to use.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20191119141211.25716-4-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/aspeed_soc.h | 1 +
 hw/arm/aspeed_ast2600.c     | 7 +++++--
 hw/arm/aspeed_soc.c         | 9 +++++++--
 3 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index 495c08be1b8..e84380984f7 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -40,6 +40,7 @@ typedef struct AspeedSoCState {
     ARMCPU cpu[ASPEED_CPUS_NUM];
     uint32_t num_cpus;
     A15MPPrivState     a7mpcore;
+    MemoryRegion *dram_mr;
     MemoryRegion sram;
     AspeedVICState vic;
     AspeedRtcState rtc;
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
index 931887ac681..a403c2aae06 100644
--- a/hw/arm/aspeed_ast2600.c
+++ b/hw/arm/aspeed_ast2600.c
@@ -158,8 +158,6 @@ static void aspeed_soc_ast2600_init(Object *obj)
                           typename);
     object_property_add_alias(obj, "num-cs", OBJECT(&s->fmc), "num-cs",
                               &error_abort);
-    object_property_add_alias(obj, "dram", OBJECT(&s->fmc), "dram",
-                              &error_abort);
 
     for (i = 0; i < sc->spis_num; i++) {
         snprintf(typename, sizeof(typename), "aspeed.spi%d-%s", i + 1, socname);
@@ -362,6 +360,11 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
     }
 
     /* FMC, The number of CS is set at the board level */
+    object_property_set_link(OBJECT(&s->fmc), OBJECT(s->dram_mr), "dram", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
     object_property_set_int(OBJECT(&s->fmc), sc->memmap[ASPEED_SDRAM],
                             "sdram-base", &err);
     if (err) {
diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index f4fe243458f..dd1ee0e3336 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -175,8 +175,6 @@ static void aspeed_soc_init(Object *obj)
                           typename);
     object_property_add_alias(obj, "num-cs", OBJECT(&s->fmc), "num-cs",
                               &error_abort);
-    object_property_add_alias(obj, "dram", OBJECT(&s->fmc), "dram",
-                              &error_abort);
 
     for (i = 0; i < sc->spis_num; i++) {
         snprintf(typename, sizeof(typename), "aspeed.spi%d-%s", i + 1, socname);
@@ -323,6 +321,11 @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
                        aspeed_soc_get_irq(s, ASPEED_I2C));
 
     /* FMC, The number of CS is set at the board level */
+    object_property_set_link(OBJECT(&s->fmc), OBJECT(s->dram_mr), "dram", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
     object_property_set_int(OBJECT(&s->fmc), sc->memmap[ASPEED_SDRAM],
                             "sdram-base", &err);
     if (err) {
@@ -429,6 +432,8 @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
 }
 static Property aspeed_soc_properties[] = {
     DEFINE_PROP_UINT32("num-cpus", AspeedSoCState, num_cpus, 0),
+    DEFINE_PROP_LINK("dram", AspeedSoCState, dram_mr, TYPE_MEMORY_REGION,
+                     MemoryRegion *),
     DEFINE_PROP_END_OF_LIST(),
 };
 
-- 
2.20.1



  parent reply	other threads:[~2019-12-16 11:25 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-16 11:08 [PULL 00/34] target-arm queue Peter Maydell
2019-12-16 11:08 ` [PULL 01/34] target/arm: Add support for cortex-m7 CPU Peter Maydell
2019-12-16 11:08 ` [PULL 02/34] exynos4210_gic: Suppress gcc9 format-truncation warnings Peter Maydell
2019-12-16 11:08 ` [PULL 03/34] aspeed/i2c: Add support for pool buffer transfers Peter Maydell
2019-12-16 11:08 ` [PULL 04/34] aspeed/i2c: Check SRAM enablement on AST2500 Peter Maydell
2019-12-16 11:08 ` Peter Maydell [this message]
2019-12-16 11:08 ` [PULL 06/34] aspeed/i2c: Add support for DMA transfers Peter Maydell
2019-12-16 11:08 ` [PULL 07/34] aspeed/i2c: Add trace events Peter Maydell
2019-12-16 11:08 ` [PULL 08/34] aspeed/sdmc: Make ast2600 default 1G Peter Maydell
2019-12-16 11:08 ` [PULL 09/34] aspeed/scu: Fix W1C behavior Peter Maydell
2019-12-16 11:08 ` [PULL 10/34] watchdog/aspeed: Improve watchdog timeout message Peter Maydell
2019-12-16 11:08 ` [PULL 11/34] watchdog/aspeed: Fix AST2600 frequency behaviour Peter Maydell
2019-12-16 11:08 ` [PULL 12/34] aspeed/smc: Restore default AHB window mapping at reset Peter Maydell
2019-12-16 11:08 ` [PULL 13/34] aspeed/smc: Do not map disabled segment on the AST2600 Peter Maydell
2019-12-16 11:08 ` [PULL 14/34] aspeed/smc: Add AST2600 timings registers Peter Maydell
2019-12-16 11:08 ` [PULL 15/34] aspeed: Remove AspeedBoardConfig array and use AspeedMachineClass Peter Maydell
2019-12-16 11:08 ` [PULL 16/34] aspeed: Add support for the tacoma-bmc board Peter Maydell
2019-12-16 11:08 ` [PULL 17/34] gpio: fix memory leak in aspeed_gpio_init() Peter Maydell
2019-12-16 11:08 ` [PULL 18/34] aspeed: Change the "scu" property definition Peter Maydell
2019-12-16 11:08 ` [PULL 19/34] aspeed: Change the "nic" " Peter Maydell
2019-12-16 11:08 ` [PULL 20/34] target/arm: Honor HCR_EL2.TID2 trapping requirements Peter Maydell
2019-12-16 11:08 ` [PULL 21/34] target/arm: Honor HCR_EL2.TID1 " Peter Maydell
2019-12-16 11:08 ` [PULL 22/34] target/arm: Handle trapping to EL2 of AArch32 VMRS instructions Peter Maydell
2019-12-16 11:08 ` [PULL 23/34] target/arm: Handle AArch32 CP15 trapping via HSTR_EL2 Peter Maydell
2019-12-16 11:08 ` [PULL 24/34] target/arm: Add support for missing Jazelle system registers Peter Maydell
2019-12-16 11:08 ` [PULL 25/34] arm/arm-powerctl: set NSACR.{CP11, CP10} bits in arm_set_cpu_on() Peter Maydell
2019-12-16 11:08 ` [PULL 26/34] tcg: cputlb: Add probe_read Peter Maydell
2019-12-16 11:08 ` [PULL 27/34] Memory: Enable writeback for given memory region Peter Maydell
2019-12-16 11:08 ` [PULL 28/34] migration: ram: Switch to ram block writeback Peter Maydell
2019-12-16 11:08 ` [PULL 29/34] target/arm: Add support for DC CVAP & DC CVADP ins Peter Maydell
2019-12-16 11:09 ` [PULL 30/34] hw/arm/sbsa-ref: Simplify by moving the gic in the machine state Peter Maydell
2019-12-16 11:09 ` [PULL 31/34] hw/arm/acpi: simplify AML bit and/or statement Peter Maydell
2019-12-16 11:09 ` [PULL 32/34] hw/arm/acpi: enable SHPC native hot plug Peter Maydell
2019-12-16 11:09 ` [PULL 33/34] hw/arm/virt: Simplify by moving the gic in the machine state Peter Maydell
2019-12-16 11:09 ` [PULL 34/34] target/arm: ensure we use current exception state after SCR update Peter Maydell
2019-12-16 14:07 ` [PULL 00/34] target-arm queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191216110904.30815-6-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.