* [PATCH v3 00/10] drm/bridge: dw-hdmi: implement bus-format negotiation and YUV420 support
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: Neil Armstrong, linux-amlogic, dri-devel, linux-kernel
This patchset is based on Boris's v4 "drm: Add support for bus-format negotiation" at [1]
patchset to implement full bus-format negotiation for DW-HDMI, including YUV420 support and
10/12/16bit YUV444, YUV422 and RGB. The Color Space Converter support is already implemented.
And the counterpart implementation in the Amlogic Meson VPU dw-hdmi glue :
- basic bus-format negotiation to select YUV444 bus-format as DW-HDMI input
- YUV420 support when HDMI2.0 YUV420 modeset
This is a follow-up from the previous attempts :
- "drm/meson: Add support for HDMI2.0 YUV420 4k60" at [2]
- "drm/meson: Add support for HDMI2.0 4k60" at [3]
Changes since RFC v2 at [5]:
- Added fixes from Jonas, who tested and integrated it for Rockchip SoCs
- Added support for 10/12/16bit tmds clock calculation
- Added support for max_bcp connector property
- Adapted to Boris's v4 patchset
- Fixed typos reported by boris
Changes since RFC v1 at [4]:
- Rewrote negociation using the v2 patchset, including full DW-HDMI fmt negociation
[1] https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-1-boris.brezillon@collabora.com
[2] https://patchwork.freedesktop.org/patch/msgid/20190520133753.23871-1-narmstrong@baylibre.com
[3] https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-1-git-send-email-narmstrong@baylibre.com
[4] https://patchwork.freedesktop.org/patch/msgid/20190820084109.24616-1-narmstrong@baylibre.com
[5] https://patchwork.freedesktop.org/patch/msgid/ 20190827081425.15011-1-narmstrong@baylibre.com
Jonas Karlman (2):
drm/bridge: dw-hdmi: set mtmdsclock for deep color
drm/bridge: dw-hdmi: add max bpc connector property
Neil Armstrong (8):
drm/bridge: synopsys: dw-hdmi: add bus format negociation
drm/bridge: synopsys: dw-hdmi: allow ycbcr420 modes for >= 0x200a
drm/meson: venc: make drm_display_mode const
drm/meson: meson_dw_hdmi: add bridge and switch to drm_bridge_funcs
drm/meson: dw-hdmi: stop enforcing input_bus_format
drm/meson: venc: add support for YUV420 setup
drm/meson: vclk: add support for YUV420 setup
drm/meson: Add YUV420 output support
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 299 +++++++++++++++++++++-
drivers/gpu/drm/meson/meson_dw_hdmi.c | 193 +++++++++++---
drivers/gpu/drm/meson/meson_vclk.c | 93 +++++--
drivers/gpu/drm/meson/meson_vclk.h | 7 +-
drivers/gpu/drm/meson/meson_venc.c | 10 +-
drivers/gpu/drm/meson/meson_venc.h | 4 +-
drivers/gpu/drm/meson/meson_venc_cvbs.c | 3 +-
include/drm/bridge/dw_hdmi.h | 1 +
8 files changed, 538 insertions(+), 72 deletions(-)
--
2.22.0
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH v3 00/10] drm/bridge: dw-hdmi: implement bus-format negotiation and YUV420 support
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
This patchset is based on Boris's v4 "drm: Add support for bus-format negotiation" at [1]
patchset to implement full bus-format negotiation for DW-HDMI, including YUV420 support and
10/12/16bit YUV444, YUV422 and RGB. The Color Space Converter support is already implemented.
And the counterpart implementation in the Amlogic Meson VPU dw-hdmi glue :
- basic bus-format negotiation to select YUV444 bus-format as DW-HDMI input
- YUV420 support when HDMI2.0 YUV420 modeset
This is a follow-up from the previous attempts :
- "drm/meson: Add support for HDMI2.0 YUV420 4k60" at [2]
- "drm/meson: Add support for HDMI2.0 4k60" at [3]
Changes since RFC v2 at [5]:
- Added fixes from Jonas, who tested and integrated it for Rockchip SoCs
- Added support for 10/12/16bit tmds clock calculation
- Added support for max_bcp connector property
- Adapted to Boris's v4 patchset
- Fixed typos reported by boris
Changes since RFC v1 at [4]:
- Rewrote negociation using the v2 patchset, including full DW-HDMI fmt negociation
[1] https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-1-boris.brezillon@collabora.com
[2] https://patchwork.freedesktop.org/patch/msgid/20190520133753.23871-1-narmstrong@baylibre.com
[3] https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-1-git-send-email-narmstrong@baylibre.com
[4] https://patchwork.freedesktop.org/patch/msgid/20190820084109.24616-1-narmstrong@baylibre.com
[5] https://patchwork.freedesktop.org/patch/msgid/ 20190827081425.15011-1-narmstrong@baylibre.com
Jonas Karlman (2):
drm/bridge: dw-hdmi: set mtmdsclock for deep color
drm/bridge: dw-hdmi: add max bpc connector property
Neil Armstrong (8):
drm/bridge: synopsys: dw-hdmi: add bus format negociation
drm/bridge: synopsys: dw-hdmi: allow ycbcr420 modes for >= 0x200a
drm/meson: venc: make drm_display_mode const
drm/meson: meson_dw_hdmi: add bridge and switch to drm_bridge_funcs
drm/meson: dw-hdmi: stop enforcing input_bus_format
drm/meson: venc: add support for YUV420 setup
drm/meson: vclk: add support for YUV420 setup
drm/meson: Add YUV420 output support
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 299 +++++++++++++++++++++-
drivers/gpu/drm/meson/meson_dw_hdmi.c | 193 +++++++++++---
drivers/gpu/drm/meson/meson_vclk.c | 93 +++++--
drivers/gpu/drm/meson/meson_vclk.h | 7 +-
drivers/gpu/drm/meson/meson_venc.c | 10 +-
drivers/gpu/drm/meson/meson_venc.h | 4 +-
drivers/gpu/drm/meson/meson_venc_cvbs.c | 3 +-
include/drm/bridge/dw_hdmi.h | 1 +
8 files changed, 538 insertions(+), 72 deletions(-)
--
2.22.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH v3 00/10] drm/bridge: dw-hdmi: implement bus-format negotiation and YUV420 support
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
This patchset is based on Boris's v4 "drm: Add support for bus-format negotiation" at [1]
patchset to implement full bus-format negotiation for DW-HDMI, including YUV420 support and
10/12/16bit YUV444, YUV422 and RGB. The Color Space Converter support is already implemented.
And the counterpart implementation in the Amlogic Meson VPU dw-hdmi glue :
- basic bus-format negotiation to select YUV444 bus-format as DW-HDMI input
- YUV420 support when HDMI2.0 YUV420 modeset
This is a follow-up from the previous attempts :
- "drm/meson: Add support for HDMI2.0 YUV420 4k60" at [2]
- "drm/meson: Add support for HDMI2.0 4k60" at [3]
Changes since RFC v2 at [5]:
- Added fixes from Jonas, who tested and integrated it for Rockchip SoCs
- Added support for 10/12/16bit tmds clock calculation
- Added support for max_bcp connector property
- Adapted to Boris's v4 patchset
- Fixed typos reported by boris
Changes since RFC v1 at [4]:
- Rewrote negociation using the v2 patchset, including full DW-HDMI fmt negociation
[1] https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-1-boris.brezillon@collabora.com
[2] https://patchwork.freedesktop.org/patch/msgid/20190520133753.23871-1-narmstrong@baylibre.com
[3] https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-1-git-send-email-narmstrong@baylibre.com
[4] https://patchwork.freedesktop.org/patch/msgid/20190820084109.24616-1-narmstrong@baylibre.com
[5] https://patchwork.freedesktop.org/patch/msgid/ 20190827081425.15011-1-narmstrong@baylibre.com
Jonas Karlman (2):
drm/bridge: dw-hdmi: set mtmdsclock for deep color
drm/bridge: dw-hdmi: add max bpc connector property
Neil Armstrong (8):
drm/bridge: synopsys: dw-hdmi: add bus format negociation
drm/bridge: synopsys: dw-hdmi: allow ycbcr420 modes for >= 0x200a
drm/meson: venc: make drm_display_mode const
drm/meson: meson_dw_hdmi: add bridge and switch to drm_bridge_funcs
drm/meson: dw-hdmi: stop enforcing input_bus_format
drm/meson: venc: add support for YUV420 setup
drm/meson: vclk: add support for YUV420 setup
drm/meson: Add YUV420 output support
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 299 +++++++++++++++++++++-
drivers/gpu/drm/meson/meson_dw_hdmi.c | 193 +++++++++++---
drivers/gpu/drm/meson/meson_vclk.c | 93 +++++--
drivers/gpu/drm/meson/meson_vclk.h | 7 +-
drivers/gpu/drm/meson/meson_venc.c | 10 +-
drivers/gpu/drm/meson/meson_venc.h | 4 +-
drivers/gpu/drm/meson/meson_venc_cvbs.c | 3 +-
include/drm/bridge/dw_hdmi.h | 1 +
8 files changed, 538 insertions(+), 72 deletions(-)
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH v3 01/10] drm/bridge: dw-hdmi: set mtmdsclock for deep color
2019-12-18 15:46 ` Neil Armstrong
(?)
@ 2019-12-18 15:46 ` Neil Armstrong
-1 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, dri-devel, linux-kernel, Neil Armstrong
From: Jonas Karlman <jonas@kwiboo.se>
Configure the correct mtmdsclock for deep colors to prepare support
for 10, 12 & 16bit output.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index dbe38a54870b..6a0b4b3a6739 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -1792,9 +1792,26 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
dev_dbg(hdmi->dev, "final pixclk = %d\n", vmode->mpixelclock);
+ if (!hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format)) {
+ switch (hdmi_bus_fmt_color_depth(
+ hdmi->hdmi_data.enc_out_bus_format)) {
+ case 16:
+ vmode->mtmdsclock = (u64)vmode->mpixelclock * 2;
+ break;
+ case 12:
+ vmode->mtmdsclock = (u64)vmode->mpixelclock * 3 / 2;
+ break;
+ case 10:
+ vmode->mtmdsclock = (u64)vmode->mpixelclock * 5 / 4;
+ break;
+ }
+ }
+
if (hdmi_bus_fmt_is_yuv420(hdmi->hdmi_data.enc_out_bus_format))
vmode->mtmdsclock /= 2;
+ dev_dbg(hdmi->dev, "final tmdsclk = %d\n", vmode->mtmdsclock);
+
/* Set up HDMI_FC_INVIDCONF */
inv_val = (hdmi->hdmi_data.hdcp_enable ||
(dw_hdmi_support_scdc(hdmi) &&
--
2.22.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 01/10] drm/bridge: dw-hdmi: set mtmdsclock for deep color
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
From: Jonas Karlman <jonas@kwiboo.se>
Configure the correct mtmdsclock for deep colors to prepare support
for 10, 12 & 16bit output.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index dbe38a54870b..6a0b4b3a6739 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -1792,9 +1792,26 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
dev_dbg(hdmi->dev, "final pixclk = %d\n", vmode->mpixelclock);
+ if (!hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format)) {
+ switch (hdmi_bus_fmt_color_depth(
+ hdmi->hdmi_data.enc_out_bus_format)) {
+ case 16:
+ vmode->mtmdsclock = (u64)vmode->mpixelclock * 2;
+ break;
+ case 12:
+ vmode->mtmdsclock = (u64)vmode->mpixelclock * 3 / 2;
+ break;
+ case 10:
+ vmode->mtmdsclock = (u64)vmode->mpixelclock * 5 / 4;
+ break;
+ }
+ }
+
if (hdmi_bus_fmt_is_yuv420(hdmi->hdmi_data.enc_out_bus_format))
vmode->mtmdsclock /= 2;
+ dev_dbg(hdmi->dev, "final tmdsclk = %d\n", vmode->mtmdsclock);
+
/* Set up HDMI_FC_INVIDCONF */
inv_val = (hdmi->hdmi_data.hdcp_enable ||
(dw_hdmi_support_scdc(hdmi) &&
--
2.22.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 01/10] drm/bridge: dw-hdmi: set mtmdsclock for deep color
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
From: Jonas Karlman <jonas@kwiboo.se>
Configure the correct mtmdsclock for deep colors to prepare support
for 10, 12 & 16bit output.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index dbe38a54870b..6a0b4b3a6739 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -1792,9 +1792,26 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
dev_dbg(hdmi->dev, "final pixclk = %d\n", vmode->mpixelclock);
+ if (!hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format)) {
+ switch (hdmi_bus_fmt_color_depth(
+ hdmi->hdmi_data.enc_out_bus_format)) {
+ case 16:
+ vmode->mtmdsclock = (u64)vmode->mpixelclock * 2;
+ break;
+ case 12:
+ vmode->mtmdsclock = (u64)vmode->mpixelclock * 3 / 2;
+ break;
+ case 10:
+ vmode->mtmdsclock = (u64)vmode->mpixelclock * 5 / 4;
+ break;
+ }
+ }
+
if (hdmi_bus_fmt_is_yuv420(hdmi->hdmi_data.enc_out_bus_format))
vmode->mtmdsclock /= 2;
+ dev_dbg(hdmi->dev, "final tmdsclk = %d\n", vmode->mtmdsclock);
+
/* Set up HDMI_FC_INVIDCONF */
inv_val = (hdmi->hdmi_data.hdcp_enable ||
(dw_hdmi_support_scdc(hdmi) &&
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 02/10] drm/bridge: dw-hdmi: add max bpc connector property
2019-12-18 15:46 ` Neil Armstrong
(?)
@ 2019-12-18 15:46 ` Neil Armstrong
-1 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, dri-devel, linux-kernel, Neil Armstrong
From: Jonas Karlman <jonas@kwiboo.se>
Add the max_bpc property to the dw-hdmi connector to prepare support
for 10, 12 & 16bit output support.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 6a0b4b3a6739..e7a0600f8cc5 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2368,6 +2368,10 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
DRM_MODE_CONNECTOR_HDMIA,
hdmi->ddc);
+ drm_atomic_helper_connector_reset(connector);
+
+ drm_connector_attach_max_bpc_property(connector, 8, 16);
+
if (hdmi->version >= 0x200a && hdmi->plat_data->use_drm_infoframe)
drm_object_attach_property(&connector->base,
connector->dev->mode_config.hdr_output_metadata_property, 0);
--
2.22.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 02/10] drm/bridge: dw-hdmi: add max bpc connector property
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
From: Jonas Karlman <jonas@kwiboo.se>
Add the max_bpc property to the dw-hdmi connector to prepare support
for 10, 12 & 16bit output support.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 6a0b4b3a6739..e7a0600f8cc5 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2368,6 +2368,10 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
DRM_MODE_CONNECTOR_HDMIA,
hdmi->ddc);
+ drm_atomic_helper_connector_reset(connector);
+
+ drm_connector_attach_max_bpc_property(connector, 8, 16);
+
if (hdmi->version >= 0x200a && hdmi->plat_data->use_drm_infoframe)
drm_object_attach_property(&connector->base,
connector->dev->mode_config.hdr_output_metadata_property, 0);
--
2.22.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 02/10] drm/bridge: dw-hdmi: add max bpc connector property
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
From: Jonas Karlman <jonas@kwiboo.se>
Add the max_bpc property to the dw-hdmi connector to prepare support
for 10, 12 & 16bit output support.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 6a0b4b3a6739..e7a0600f8cc5 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2368,6 +2368,10 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
DRM_MODE_CONNECTOR_HDMIA,
hdmi->ddc);
+ drm_atomic_helper_connector_reset(connector);
+
+ drm_connector_attach_max_bpc_property(connector, 8, 16);
+
if (hdmi->version >= 0x200a && hdmi->plat_data->use_drm_infoframe)
drm_object_attach_property(&connector->base,
connector->dev->mode_config.hdr_output_metadata_property, 0);
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 03/10] drm/bridge: synopsys: dw-hdmi: add bus format negociation
2019-12-18 15:46 ` Neil Armstrong
(?)
@ 2019-12-18 15:46 ` Neil Armstrong
-1 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: Neil Armstrong, linux-amlogic, dri-devel, linux-kernel
Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negociate
the possible output and input formats for the current mode and monitor,
and use the negotiated formats in a basic atomic_check callback.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 272 +++++++++++++++++++++-
1 file changed, 268 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index e7a0600f8cc5..8c1f7e5e6698 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2069,11 +2069,10 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
hdmi->hdmi_data.video_mode.mpixelrepetitionoutput = 0;
hdmi->hdmi_data.video_mode.mpixelrepetitioninput = 0;
- /* TOFIX: Get input format from plat data or fallback to RGB888 */
if (hdmi->plat_data->input_bus_format)
hdmi->hdmi_data.enc_in_bus_format =
hdmi->plat_data->input_bus_format;
- else
+ else if (hdmi->hdmi_data.enc_in_bus_format == MEDIA_BUS_FMT_FIXED)
hdmi->hdmi_data.enc_in_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
/* TOFIX: Get input encoding from plat data or fallback to none */
@@ -2083,8 +2082,8 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
else
hdmi->hdmi_data.enc_in_encoding = V4L2_YCBCR_ENC_DEFAULT;
- /* TOFIX: Default to RGB888 output format */
- hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+ if (hdmi->hdmi_data.enc_out_bus_format == MEDIA_BUS_FMT_FIXED)
+ hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
hdmi->hdmi_data.pix_repet_factor = 0;
hdmi->hdmi_data.hdcp_enable = 0;
@@ -2350,6 +2349,267 @@ static const struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs =
.atomic_check = dw_hdmi_connector_atomic_check,
};
+/*
+ * Possible output formats :
+ * - MEDIA_BUS_FMT_UYYVYY16_0_5X48,
+ * - MEDIA_BUS_FMT_UYYVYY12_0_5X36,
+ * - MEDIA_BUS_FMT_UYYVYY10_0_5X30,
+ * - MEDIA_BUS_FMT_UYYVYY8_0_5X24,
+ * - MEDIA_BUS_FMT_YUV16_1X48,
+ * - MEDIA_BUS_FMT_RGB161616_1X48,
+ * - MEDIA_BUS_FMT_UYVY12_1X24,
+ * - MEDIA_BUS_FMT_YUV12_1X36,
+ * - MEDIA_BUS_FMT_RGB121212_1X36,
+ * - MEDIA_BUS_FMT_UYVY10_1X20,
+ * - MEDIA_BUS_FMT_YUV10_1X30,
+ * - MEDIA_BUS_FMT_RGB101010_1X30,
+ * - MEDIA_BUS_FMT_UYVY8_1X16,
+ * - MEDIA_BUS_FMT_YUV8_1X24,
+ * - MEDIA_BUS_FMT_RGB888_1X24,
+ */
+
+/* Can return a maximum of 12 possible output formats for a mode/connector */
+#define MAX_OUTPUT_SEL_FORMATS 12
+
+static u32 *dw_hdmi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ unsigned int *num_output_fmts)
+{
+ struct drm_connector *conn = conn_state->connector;
+ struct drm_display_info *info = &conn->display_info;
+ struct drm_display_mode *mode = &crtc_state->mode;
+ u8 max_bpc = conn_state->max_requested_bpc;
+ bool is_hdmi2_sink = info->hdmi.scdc.supported ||
+ (info->color_formats & DRM_COLOR_FORMAT_YCRCB420);
+ u32 *output_fmts;
+ int i = 0;
+
+ *num_output_fmts = 0;
+
+ output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts),
+ GFP_KERNEL);
+ if (!output_fmts)
+ return NULL;
+
+ /*
+ * If the current mode enforces 4:2:0, force the output but format
+ * to 4:2:0 and do not add the YUV422/444/RGB formats
+ */
+ if (conn->ycbcr_420_allowed &&
+ (drm_mode_is_420_only(info, mode) ||
+ (is_hdmi2_sink && drm_mode_is_420_also(info, mode)))) {
+
+ /* Order bus formats from 16bit to 8bit if supported */
+ if (max_bpc >= 16 && info->bpc == 16 &&
+ (info->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_48))
+ output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY16_0_5X48;
+
+ if (max_bpc >= 12 && info->bpc >= 12 &&
+ (info->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_36))
+ output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY12_0_5X36;
+
+ if (max_bpc >= 10 && info->bpc >= 10 &&
+ (info->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_30))
+ output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY10_0_5X30;
+
+ /* Default 8bit fallback */
+ output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY8_0_5X24;
+
+ *num_output_fmts = i;
+
+ return output_fmts;
+ }
+
+ /*
+ * Order bus formats from 16bit to 8bit and from YUV422 to RGB
+ * if supported. In any case the default RGB888 format is added
+ */
+
+ if (max_bpc >= 16 && info->bpc == 16) {
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ output_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48;
+
+ output_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48;
+ }
+
+ if (max_bpc >= 12 && info->bpc >= 12) {
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ output_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
+
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ output_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
+
+ output_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
+ }
+
+ if (max_bpc >= 10 && info->bpc >= 10) {
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ output_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
+
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ output_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
+
+ output_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
+ }
+
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ output_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
+
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ output_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
+
+ /* Default 8bit RGB fallback */
+ output_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
+
+ *num_output_fmts = i;
+
+ return output_fmts;
+}
+
+/*
+ * Possible input formats :
+ * - MEDIA_BUS_FMT_RGB888_1X24
+ * - MEDIA_BUS_FMT_YUV8_1X24
+ * - MEDIA_BUS_FMT_UYVY8_1X16
+ * - MEDIA_BUS_FMT_UYYVYY8_0_5X24
+ * - MEDIA_BUS_FMT_RGB101010_1X30
+ * - MEDIA_BUS_FMT_YUV10_1X30
+ * - MEDIA_BUS_FMT_UYVY10_1X20
+ * - MEDIA_BUS_FMT_UYYVYY10_0_5X30
+ * - MEDIA_BUS_FMT_RGB121212_1X36
+ * - MEDIA_BUS_FMT_YUV12_1X36
+ * - MEDIA_BUS_FMT_UYVY12_1X24
+ * - MEDIA_BUS_FMT_UYYVYY12_0_5X36
+ * - MEDIA_BUS_FMT_RGB161616_1X48
+ * - MEDIA_BUS_FMT_YUV16_1X48
+ * - MEDIA_BUS_FMT_UYYVYY16_0_5X48
+ */
+
+/* Can return a maximum of 4 possible input formats for an output format */
+#define MAX_INPUT_SEL_FORMATS 4
+
+static u32 *dw_hdmi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ u32 output_fmt,
+ unsigned int *num_input_fmts)
+{
+ u32 *input_fmts;
+ int i = 0;
+
+ *num_input_fmts = 0;
+
+ input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
+ GFP_KERNEL);
+ if (!input_fmts)
+ return NULL;
+
+ switch (output_fmt) {
+ /* 8bit */
+ case MEDIA_BUS_FMT_RGB888_1X24:
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
+ break;
+ case MEDIA_BUS_FMT_YUV8_1X24:
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
+ break;
+ case MEDIA_BUS_FMT_UYVY8_1X16:
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
+ break;
+
+ /* 10bit */
+ case MEDIA_BUS_FMT_RGB101010_1X30:
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
+ break;
+ case MEDIA_BUS_FMT_YUV10_1X30:
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
+ break;
+ case MEDIA_BUS_FMT_UYVY10_1X20:
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
+ break;
+
+ /* 12bit */
+ case MEDIA_BUS_FMT_RGB121212_1X36:
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
+ break;
+ case MEDIA_BUS_FMT_YUV12_1X36:
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
+ break;
+ case MEDIA_BUS_FMT_UYVY12_1X24:
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
+ break;
+
+ /* 16bit */
+ case MEDIA_BUS_FMT_RGB161616_1X48:
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48;
+ break;
+ case MEDIA_BUS_FMT_YUV16_1X48:
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48;
+ break;
+
+ /* 420 */
+ case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
+ case MEDIA_BUS_FMT_UYYVYY10_0_5X30:
+ case MEDIA_BUS_FMT_UYYVYY12_0_5X36:
+ case MEDIA_BUS_FMT_UYYVYY16_0_5X48:
+ input_fmts[i++] = output_fmt;
+ break;
+ }
+
+ *num_input_fmts = i;
+
+ if (*num_input_fmts == 0) {
+ kfree(input_fmts);
+ input_fmts = NULL;
+ }
+
+ return input_fmts;
+}
+
+static int dw_hdmi_bridge_atomic_check(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
+{
+ struct dw_hdmi *hdmi = bridge->driver_private;
+
+ dev_dbg(hdmi->dev, "selected output format %x\n",
+ bridge_state->output_bus_cfg.format);
+
+ hdmi->hdmi_data.enc_out_bus_format =
+ bridge_state->output_bus_cfg.format;
+
+ dev_dbg(hdmi->dev, "selected input format %x\n",
+ bridge_state->input_bus_cfg.format);
+
+ hdmi->hdmi_data.enc_in_bus_format =
+ bridge_state->input_bus_cfg.format;
+
+ return 0;
+}
+
static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
{
struct dw_hdmi *hdmi = bridge->driver_private;
@@ -2458,6 +2718,9 @@ static void dw_hdmi_bridge_enable(struct drm_bridge *bridge)
static const struct drm_bridge_funcs dw_hdmi_bridge_funcs = {
.attach = dw_hdmi_bridge_attach,
.detach = dw_hdmi_bridge_detach,
+ .atomic_check = dw_hdmi_bridge_atomic_check,
+ .atomic_get_output_bus_fmts = dw_hdmi_bridge_atomic_get_output_bus_fmts,
+ .atomic_get_input_bus_fmts = dw_hdmi_bridge_atomic_get_input_bus_fmts,
.enable = dw_hdmi_bridge_enable,
.disable = dw_hdmi_bridge_disable,
.mode_set = dw_hdmi_bridge_mode_set,
@@ -2921,6 +3184,7 @@ __dw_hdmi_probe(struct platform_device *pdev,
hdmi->bridge.driver_private = hdmi;
hdmi->bridge.funcs = &dw_hdmi_bridge_funcs;
+
#ifdef CONFIG_OF
hdmi->bridge.of_node = pdev->dev.of_node;
#endif
--
2.22.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 03/10] drm/bridge: synopsys: dw-hdmi: add bus format negociation
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negociate
the possible output and input formats for the current mode and monitor,
and use the negotiated formats in a basic atomic_check callback.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 272 +++++++++++++++++++++-
1 file changed, 268 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index e7a0600f8cc5..8c1f7e5e6698 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2069,11 +2069,10 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
hdmi->hdmi_data.video_mode.mpixelrepetitionoutput = 0;
hdmi->hdmi_data.video_mode.mpixelrepetitioninput = 0;
- /* TOFIX: Get input format from plat data or fallback to RGB888 */
if (hdmi->plat_data->input_bus_format)
hdmi->hdmi_data.enc_in_bus_format =
hdmi->plat_data->input_bus_format;
- else
+ else if (hdmi->hdmi_data.enc_in_bus_format == MEDIA_BUS_FMT_FIXED)
hdmi->hdmi_data.enc_in_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
/* TOFIX: Get input encoding from plat data or fallback to none */
@@ -2083,8 +2082,8 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
else
hdmi->hdmi_data.enc_in_encoding = V4L2_YCBCR_ENC_DEFAULT;
- /* TOFIX: Default to RGB888 output format */
- hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+ if (hdmi->hdmi_data.enc_out_bus_format == MEDIA_BUS_FMT_FIXED)
+ hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
hdmi->hdmi_data.pix_repet_factor = 0;
hdmi->hdmi_data.hdcp_enable = 0;
@@ -2350,6 +2349,267 @@ static const struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs =
.atomic_check = dw_hdmi_connector_atomic_check,
};
+/*
+ * Possible output formats :
+ * - MEDIA_BUS_FMT_UYYVYY16_0_5X48,
+ * - MEDIA_BUS_FMT_UYYVYY12_0_5X36,
+ * - MEDIA_BUS_FMT_UYYVYY10_0_5X30,
+ * - MEDIA_BUS_FMT_UYYVYY8_0_5X24,
+ * - MEDIA_BUS_FMT_YUV16_1X48,
+ * - MEDIA_BUS_FMT_RGB161616_1X48,
+ * - MEDIA_BUS_FMT_UYVY12_1X24,
+ * - MEDIA_BUS_FMT_YUV12_1X36,
+ * - MEDIA_BUS_FMT_RGB121212_1X36,
+ * - MEDIA_BUS_FMT_UYVY10_1X20,
+ * - MEDIA_BUS_FMT_YUV10_1X30,
+ * - MEDIA_BUS_FMT_RGB101010_1X30,
+ * - MEDIA_BUS_FMT_UYVY8_1X16,
+ * - MEDIA_BUS_FMT_YUV8_1X24,
+ * - MEDIA_BUS_FMT_RGB888_1X24,
+ */
+
+/* Can return a maximum of 12 possible output formats for a mode/connector */
+#define MAX_OUTPUT_SEL_FORMATS 12
+
+static u32 *dw_hdmi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ unsigned int *num_output_fmts)
+{
+ struct drm_connector *conn = conn_state->connector;
+ struct drm_display_info *info = &conn->display_info;
+ struct drm_display_mode *mode = &crtc_state->mode;
+ u8 max_bpc = conn_state->max_requested_bpc;
+ bool is_hdmi2_sink = info->hdmi.scdc.supported ||
+ (info->color_formats & DRM_COLOR_FORMAT_YCRCB420);
+ u32 *output_fmts;
+ int i = 0;
+
+ *num_output_fmts = 0;
+
+ output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts),
+ GFP_KERNEL);
+ if (!output_fmts)
+ return NULL;
+
+ /*
+ * If the current mode enforces 4:2:0, force the output but format
+ * to 4:2:0 and do not add the YUV422/444/RGB formats
+ */
+ if (conn->ycbcr_420_allowed &&
+ (drm_mode_is_420_only(info, mode) ||
+ (is_hdmi2_sink && drm_mode_is_420_also(info, mode)))) {
+
+ /* Order bus formats from 16bit to 8bit if supported */
+ if (max_bpc >= 16 && info->bpc == 16 &&
+ (info->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_48))
+ output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY16_0_5X48;
+
+ if (max_bpc >= 12 && info->bpc >= 12 &&
+ (info->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_36))
+ output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY12_0_5X36;
+
+ if (max_bpc >= 10 && info->bpc >= 10 &&
+ (info->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_30))
+ output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY10_0_5X30;
+
+ /* Default 8bit fallback */
+ output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY8_0_5X24;
+
+ *num_output_fmts = i;
+
+ return output_fmts;
+ }
+
+ /*
+ * Order bus formats from 16bit to 8bit and from YUV422 to RGB
+ * if supported. In any case the default RGB888 format is added
+ */
+
+ if (max_bpc >= 16 && info->bpc == 16) {
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ output_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48;
+
+ output_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48;
+ }
+
+ if (max_bpc >= 12 && info->bpc >= 12) {
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ output_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
+
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ output_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
+
+ output_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
+ }
+
+ if (max_bpc >= 10 && info->bpc >= 10) {
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ output_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
+
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ output_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
+
+ output_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
+ }
+
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ output_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
+
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ output_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
+
+ /* Default 8bit RGB fallback */
+ output_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
+
+ *num_output_fmts = i;
+
+ return output_fmts;
+}
+
+/*
+ * Possible input formats :
+ * - MEDIA_BUS_FMT_RGB888_1X24
+ * - MEDIA_BUS_FMT_YUV8_1X24
+ * - MEDIA_BUS_FMT_UYVY8_1X16
+ * - MEDIA_BUS_FMT_UYYVYY8_0_5X24
+ * - MEDIA_BUS_FMT_RGB101010_1X30
+ * - MEDIA_BUS_FMT_YUV10_1X30
+ * - MEDIA_BUS_FMT_UYVY10_1X20
+ * - MEDIA_BUS_FMT_UYYVYY10_0_5X30
+ * - MEDIA_BUS_FMT_RGB121212_1X36
+ * - MEDIA_BUS_FMT_YUV12_1X36
+ * - MEDIA_BUS_FMT_UYVY12_1X24
+ * - MEDIA_BUS_FMT_UYYVYY12_0_5X36
+ * - MEDIA_BUS_FMT_RGB161616_1X48
+ * - MEDIA_BUS_FMT_YUV16_1X48
+ * - MEDIA_BUS_FMT_UYYVYY16_0_5X48
+ */
+
+/* Can return a maximum of 4 possible input formats for an output format */
+#define MAX_INPUT_SEL_FORMATS 4
+
+static u32 *dw_hdmi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ u32 output_fmt,
+ unsigned int *num_input_fmts)
+{
+ u32 *input_fmts;
+ int i = 0;
+
+ *num_input_fmts = 0;
+
+ input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
+ GFP_KERNEL);
+ if (!input_fmts)
+ return NULL;
+
+ switch (output_fmt) {
+ /* 8bit */
+ case MEDIA_BUS_FMT_RGB888_1X24:
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
+ break;
+ case MEDIA_BUS_FMT_YUV8_1X24:
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
+ break;
+ case MEDIA_BUS_FMT_UYVY8_1X16:
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
+ break;
+
+ /* 10bit */
+ case MEDIA_BUS_FMT_RGB101010_1X30:
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
+ break;
+ case MEDIA_BUS_FMT_YUV10_1X30:
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
+ break;
+ case MEDIA_BUS_FMT_UYVY10_1X20:
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
+ break;
+
+ /* 12bit */
+ case MEDIA_BUS_FMT_RGB121212_1X36:
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
+ break;
+ case MEDIA_BUS_FMT_YUV12_1X36:
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
+ break;
+ case MEDIA_BUS_FMT_UYVY12_1X24:
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
+ break;
+
+ /* 16bit */
+ case MEDIA_BUS_FMT_RGB161616_1X48:
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48;
+ break;
+ case MEDIA_BUS_FMT_YUV16_1X48:
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48;
+ break;
+
+ /* 420 */
+ case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
+ case MEDIA_BUS_FMT_UYYVYY10_0_5X30:
+ case MEDIA_BUS_FMT_UYYVYY12_0_5X36:
+ case MEDIA_BUS_FMT_UYYVYY16_0_5X48:
+ input_fmts[i++] = output_fmt;
+ break;
+ }
+
+ *num_input_fmts = i;
+
+ if (*num_input_fmts == 0) {
+ kfree(input_fmts);
+ input_fmts = NULL;
+ }
+
+ return input_fmts;
+}
+
+static int dw_hdmi_bridge_atomic_check(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
+{
+ struct dw_hdmi *hdmi = bridge->driver_private;
+
+ dev_dbg(hdmi->dev, "selected output format %x\n",
+ bridge_state->output_bus_cfg.format);
+
+ hdmi->hdmi_data.enc_out_bus_format =
+ bridge_state->output_bus_cfg.format;
+
+ dev_dbg(hdmi->dev, "selected input format %x\n",
+ bridge_state->input_bus_cfg.format);
+
+ hdmi->hdmi_data.enc_in_bus_format =
+ bridge_state->input_bus_cfg.format;
+
+ return 0;
+}
+
static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
{
struct dw_hdmi *hdmi = bridge->driver_private;
@@ -2458,6 +2718,9 @@ static void dw_hdmi_bridge_enable(struct drm_bridge *bridge)
static const struct drm_bridge_funcs dw_hdmi_bridge_funcs = {
.attach = dw_hdmi_bridge_attach,
.detach = dw_hdmi_bridge_detach,
+ .atomic_check = dw_hdmi_bridge_atomic_check,
+ .atomic_get_output_bus_fmts = dw_hdmi_bridge_atomic_get_output_bus_fmts,
+ .atomic_get_input_bus_fmts = dw_hdmi_bridge_atomic_get_input_bus_fmts,
.enable = dw_hdmi_bridge_enable,
.disable = dw_hdmi_bridge_disable,
.mode_set = dw_hdmi_bridge_mode_set,
@@ -2921,6 +3184,7 @@ __dw_hdmi_probe(struct platform_device *pdev,
hdmi->bridge.driver_private = hdmi;
hdmi->bridge.funcs = &dw_hdmi_bridge_funcs;
+
#ifdef CONFIG_OF
hdmi->bridge.of_node = pdev->dev.of_node;
#endif
--
2.22.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 03/10] drm/bridge: synopsys: dw-hdmi: add bus format negociation
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negociate
the possible output and input formats for the current mode and monitor,
and use the negotiated formats in a basic atomic_check callback.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 272 +++++++++++++++++++++-
1 file changed, 268 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index e7a0600f8cc5..8c1f7e5e6698 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2069,11 +2069,10 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
hdmi->hdmi_data.video_mode.mpixelrepetitionoutput = 0;
hdmi->hdmi_data.video_mode.mpixelrepetitioninput = 0;
- /* TOFIX: Get input format from plat data or fallback to RGB888 */
if (hdmi->plat_data->input_bus_format)
hdmi->hdmi_data.enc_in_bus_format =
hdmi->plat_data->input_bus_format;
- else
+ else if (hdmi->hdmi_data.enc_in_bus_format == MEDIA_BUS_FMT_FIXED)
hdmi->hdmi_data.enc_in_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
/* TOFIX: Get input encoding from plat data or fallback to none */
@@ -2083,8 +2082,8 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
else
hdmi->hdmi_data.enc_in_encoding = V4L2_YCBCR_ENC_DEFAULT;
- /* TOFIX: Default to RGB888 output format */
- hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+ if (hdmi->hdmi_data.enc_out_bus_format == MEDIA_BUS_FMT_FIXED)
+ hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
hdmi->hdmi_data.pix_repet_factor = 0;
hdmi->hdmi_data.hdcp_enable = 0;
@@ -2350,6 +2349,267 @@ static const struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs =
.atomic_check = dw_hdmi_connector_atomic_check,
};
+/*
+ * Possible output formats :
+ * - MEDIA_BUS_FMT_UYYVYY16_0_5X48,
+ * - MEDIA_BUS_FMT_UYYVYY12_0_5X36,
+ * - MEDIA_BUS_FMT_UYYVYY10_0_5X30,
+ * - MEDIA_BUS_FMT_UYYVYY8_0_5X24,
+ * - MEDIA_BUS_FMT_YUV16_1X48,
+ * - MEDIA_BUS_FMT_RGB161616_1X48,
+ * - MEDIA_BUS_FMT_UYVY12_1X24,
+ * - MEDIA_BUS_FMT_YUV12_1X36,
+ * - MEDIA_BUS_FMT_RGB121212_1X36,
+ * - MEDIA_BUS_FMT_UYVY10_1X20,
+ * - MEDIA_BUS_FMT_YUV10_1X30,
+ * - MEDIA_BUS_FMT_RGB101010_1X30,
+ * - MEDIA_BUS_FMT_UYVY8_1X16,
+ * - MEDIA_BUS_FMT_YUV8_1X24,
+ * - MEDIA_BUS_FMT_RGB888_1X24,
+ */
+
+/* Can return a maximum of 12 possible output formats for a mode/connector */
+#define MAX_OUTPUT_SEL_FORMATS 12
+
+static u32 *dw_hdmi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ unsigned int *num_output_fmts)
+{
+ struct drm_connector *conn = conn_state->connector;
+ struct drm_display_info *info = &conn->display_info;
+ struct drm_display_mode *mode = &crtc_state->mode;
+ u8 max_bpc = conn_state->max_requested_bpc;
+ bool is_hdmi2_sink = info->hdmi.scdc.supported ||
+ (info->color_formats & DRM_COLOR_FORMAT_YCRCB420);
+ u32 *output_fmts;
+ int i = 0;
+
+ *num_output_fmts = 0;
+
+ output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts),
+ GFP_KERNEL);
+ if (!output_fmts)
+ return NULL;
+
+ /*
+ * If the current mode enforces 4:2:0, force the output but format
+ * to 4:2:0 and do not add the YUV422/444/RGB formats
+ */
+ if (conn->ycbcr_420_allowed &&
+ (drm_mode_is_420_only(info, mode) ||
+ (is_hdmi2_sink && drm_mode_is_420_also(info, mode)))) {
+
+ /* Order bus formats from 16bit to 8bit if supported */
+ if (max_bpc >= 16 && info->bpc == 16 &&
+ (info->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_48))
+ output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY16_0_5X48;
+
+ if (max_bpc >= 12 && info->bpc >= 12 &&
+ (info->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_36))
+ output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY12_0_5X36;
+
+ if (max_bpc >= 10 && info->bpc >= 10 &&
+ (info->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_30))
+ output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY10_0_5X30;
+
+ /* Default 8bit fallback */
+ output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY8_0_5X24;
+
+ *num_output_fmts = i;
+
+ return output_fmts;
+ }
+
+ /*
+ * Order bus formats from 16bit to 8bit and from YUV422 to RGB
+ * if supported. In any case the default RGB888 format is added
+ */
+
+ if (max_bpc >= 16 && info->bpc == 16) {
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ output_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48;
+
+ output_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48;
+ }
+
+ if (max_bpc >= 12 && info->bpc >= 12) {
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ output_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
+
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ output_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
+
+ output_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
+ }
+
+ if (max_bpc >= 10 && info->bpc >= 10) {
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ output_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
+
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ output_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
+
+ output_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
+ }
+
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ output_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
+
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ output_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
+
+ /* Default 8bit RGB fallback */
+ output_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
+
+ *num_output_fmts = i;
+
+ return output_fmts;
+}
+
+/*
+ * Possible input formats :
+ * - MEDIA_BUS_FMT_RGB888_1X24
+ * - MEDIA_BUS_FMT_YUV8_1X24
+ * - MEDIA_BUS_FMT_UYVY8_1X16
+ * - MEDIA_BUS_FMT_UYYVYY8_0_5X24
+ * - MEDIA_BUS_FMT_RGB101010_1X30
+ * - MEDIA_BUS_FMT_YUV10_1X30
+ * - MEDIA_BUS_FMT_UYVY10_1X20
+ * - MEDIA_BUS_FMT_UYYVYY10_0_5X30
+ * - MEDIA_BUS_FMT_RGB121212_1X36
+ * - MEDIA_BUS_FMT_YUV12_1X36
+ * - MEDIA_BUS_FMT_UYVY12_1X24
+ * - MEDIA_BUS_FMT_UYYVYY12_0_5X36
+ * - MEDIA_BUS_FMT_RGB161616_1X48
+ * - MEDIA_BUS_FMT_YUV16_1X48
+ * - MEDIA_BUS_FMT_UYYVYY16_0_5X48
+ */
+
+/* Can return a maximum of 4 possible input formats for an output format */
+#define MAX_INPUT_SEL_FORMATS 4
+
+static u32 *dw_hdmi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ u32 output_fmt,
+ unsigned int *num_input_fmts)
+{
+ u32 *input_fmts;
+ int i = 0;
+
+ *num_input_fmts = 0;
+
+ input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
+ GFP_KERNEL);
+ if (!input_fmts)
+ return NULL;
+
+ switch (output_fmt) {
+ /* 8bit */
+ case MEDIA_BUS_FMT_RGB888_1X24:
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
+ break;
+ case MEDIA_BUS_FMT_YUV8_1X24:
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
+ break;
+ case MEDIA_BUS_FMT_UYVY8_1X16:
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
+ break;
+
+ /* 10bit */
+ case MEDIA_BUS_FMT_RGB101010_1X30:
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
+ break;
+ case MEDIA_BUS_FMT_YUV10_1X30:
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
+ break;
+ case MEDIA_BUS_FMT_UYVY10_1X20:
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
+ break;
+
+ /* 12bit */
+ case MEDIA_BUS_FMT_RGB121212_1X36:
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
+ break;
+ case MEDIA_BUS_FMT_YUV12_1X36:
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
+ break;
+ case MEDIA_BUS_FMT_UYVY12_1X24:
+ input_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
+ break;
+
+ /* 16bit */
+ case MEDIA_BUS_FMT_RGB161616_1X48:
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48;
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48;
+ break;
+ case MEDIA_BUS_FMT_YUV16_1X48:
+ input_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48;
+ input_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48;
+ break;
+
+ /* 420 */
+ case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
+ case MEDIA_BUS_FMT_UYYVYY10_0_5X30:
+ case MEDIA_BUS_FMT_UYYVYY12_0_5X36:
+ case MEDIA_BUS_FMT_UYYVYY16_0_5X48:
+ input_fmts[i++] = output_fmt;
+ break;
+ }
+
+ *num_input_fmts = i;
+
+ if (*num_input_fmts == 0) {
+ kfree(input_fmts);
+ input_fmts = NULL;
+ }
+
+ return input_fmts;
+}
+
+static int dw_hdmi_bridge_atomic_check(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
+{
+ struct dw_hdmi *hdmi = bridge->driver_private;
+
+ dev_dbg(hdmi->dev, "selected output format %x\n",
+ bridge_state->output_bus_cfg.format);
+
+ hdmi->hdmi_data.enc_out_bus_format =
+ bridge_state->output_bus_cfg.format;
+
+ dev_dbg(hdmi->dev, "selected input format %x\n",
+ bridge_state->input_bus_cfg.format);
+
+ hdmi->hdmi_data.enc_in_bus_format =
+ bridge_state->input_bus_cfg.format;
+
+ return 0;
+}
+
static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
{
struct dw_hdmi *hdmi = bridge->driver_private;
@@ -2458,6 +2718,9 @@ static void dw_hdmi_bridge_enable(struct drm_bridge *bridge)
static const struct drm_bridge_funcs dw_hdmi_bridge_funcs = {
.attach = dw_hdmi_bridge_attach,
.detach = dw_hdmi_bridge_detach,
+ .atomic_check = dw_hdmi_bridge_atomic_check,
+ .atomic_get_output_bus_fmts = dw_hdmi_bridge_atomic_get_output_bus_fmts,
+ .atomic_get_input_bus_fmts = dw_hdmi_bridge_atomic_get_input_bus_fmts,
.enable = dw_hdmi_bridge_enable,
.disable = dw_hdmi_bridge_disable,
.mode_set = dw_hdmi_bridge_mode_set,
@@ -2921,6 +3184,7 @@ __dw_hdmi_probe(struct platform_device *pdev,
hdmi->bridge.driver_private = hdmi;
hdmi->bridge.funcs = &dw_hdmi_bridge_funcs;
+
#ifdef CONFIG_OF
hdmi->bridge.of_node = pdev->dev.of_node;
#endif
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 04/10] drm/bridge: synopsys: dw-hdmi: allow ycbcr420 modes for >= 0x200a
2019-12-18 15:46 ` Neil Armstrong
(?)
@ 2019-12-18 15:46 ` Neil Armstrong
-1 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: Neil Armstrong, linux-amlogic, dri-devel, linux-kernel
Now the DW-HDMI Controller supports the HDMI2.0 modes, enable support
for these modes in the connector if the platform supports them.
We limit these modes to DW-HDMI IP version >= 0x200a which
are designed to support HDMI2.0 display modes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 6 ++++++
include/drm/bridge/dw_hdmi.h | 1 +
2 files changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 8c1f7e5e6698..bb87b87c752e 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -3189,6 +3189,12 @@ __dw_hdmi_probe(struct platform_device *pdev,
hdmi->bridge.of_node = pdev->dev.of_node;
#endif
+ if (hdmi->version >= 0x200a)
+ hdmi->connector.ycbcr_420_allowed =
+ hdmi->plat_data->ycbcr_420_allowed;
+ else
+ hdmi->connector.ycbcr_420_allowed = false;
+
memset(&pdevinfo, 0, sizeof(pdevinfo));
pdevinfo.parent = dev;
pdevinfo.id = PLATFORM_DEVID_AUTO;
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index fbf3812c4326..19e30cdd35bf 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -127,6 +127,7 @@ struct dw_hdmi_plat_data {
unsigned long input_bus_format;
unsigned long input_bus_encoding;
bool use_drm_infoframe;
+ bool ycbcr_420_allowed;
/* Vendor PHY support */
const struct dw_hdmi_phy_ops *phy_ops;
--
2.22.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 04/10] drm/bridge: synopsys: dw-hdmi: allow ycbcr420 modes for >= 0x200a
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
Now the DW-HDMI Controller supports the HDMI2.0 modes, enable support
for these modes in the connector if the platform supports them.
We limit these modes to DW-HDMI IP version >= 0x200a which
are designed to support HDMI2.0 display modes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 6 ++++++
include/drm/bridge/dw_hdmi.h | 1 +
2 files changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 8c1f7e5e6698..bb87b87c752e 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -3189,6 +3189,12 @@ __dw_hdmi_probe(struct platform_device *pdev,
hdmi->bridge.of_node = pdev->dev.of_node;
#endif
+ if (hdmi->version >= 0x200a)
+ hdmi->connector.ycbcr_420_allowed =
+ hdmi->plat_data->ycbcr_420_allowed;
+ else
+ hdmi->connector.ycbcr_420_allowed = false;
+
memset(&pdevinfo, 0, sizeof(pdevinfo));
pdevinfo.parent = dev;
pdevinfo.id = PLATFORM_DEVID_AUTO;
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index fbf3812c4326..19e30cdd35bf 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -127,6 +127,7 @@ struct dw_hdmi_plat_data {
unsigned long input_bus_format;
unsigned long input_bus_encoding;
bool use_drm_infoframe;
+ bool ycbcr_420_allowed;
/* Vendor PHY support */
const struct dw_hdmi_phy_ops *phy_ops;
--
2.22.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 04/10] drm/bridge: synopsys: dw-hdmi: allow ycbcr420 modes for >= 0x200a
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
Now the DW-HDMI Controller supports the HDMI2.0 modes, enable support
for these modes in the connector if the platform supports them.
We limit these modes to DW-HDMI IP version >= 0x200a which
are designed to support HDMI2.0 display modes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 6 ++++++
include/drm/bridge/dw_hdmi.h | 1 +
2 files changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 8c1f7e5e6698..bb87b87c752e 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -3189,6 +3189,12 @@ __dw_hdmi_probe(struct platform_device *pdev,
hdmi->bridge.of_node = pdev->dev.of_node;
#endif
+ if (hdmi->version >= 0x200a)
+ hdmi->connector.ycbcr_420_allowed =
+ hdmi->plat_data->ycbcr_420_allowed;
+ else
+ hdmi->connector.ycbcr_420_allowed = false;
+
memset(&pdevinfo, 0, sizeof(pdevinfo));
pdevinfo.parent = dev;
pdevinfo.id = PLATFORM_DEVID_AUTO;
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index fbf3812c4326..19e30cdd35bf 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -127,6 +127,7 @@ struct dw_hdmi_plat_data {
unsigned long input_bus_format;
unsigned long input_bus_encoding;
bool use_drm_infoframe;
+ bool ycbcr_420_allowed;
/* Vendor PHY support */
const struct dw_hdmi_phy_ops *phy_ops;
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 05/10] drm/meson: venc: make drm_display_mode const
2019-12-18 15:46 ` Neil Armstrong
(?)
@ 2019-12-18 15:46 ` Neil Armstrong
-1 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: Neil Armstrong, linux-amlogic, dri-devel, linux-kernel
Before switching to bridge funcs, make sure drm_display_mode is passed
as const to the venc functions.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_venc.c | 2 +-
drivers/gpu/drm/meson/meson_venc.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index 4efd7864d5bf..a9ab78970bfe 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -946,7 +946,7 @@ bool meson_venc_hdmi_venc_repeat(int vic)
EXPORT_SYMBOL_GPL(meson_venc_hdmi_venc_repeat);
void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
- struct drm_display_mode *mode)
+ const struct drm_display_mode *mode)
{
union meson_hdmi_venc_mode *vmode = NULL;
union meson_hdmi_venc_mode vmode_dmt;
diff --git a/drivers/gpu/drm/meson/meson_venc.h b/drivers/gpu/drm/meson/meson_venc.h
index 576768bdd08d..1abdcbdf51c0 100644
--- a/drivers/gpu/drm/meson/meson_venc.h
+++ b/drivers/gpu/drm/meson/meson_venc.h
@@ -60,7 +60,7 @@ extern struct meson_cvbs_enci_mode meson_cvbs_enci_ntsc;
void meson_venci_cvbs_mode_set(struct meson_drm *priv,
struct meson_cvbs_enci_mode *mode);
void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
- struct drm_display_mode *mode);
+ const struct drm_display_mode *mode);
unsigned int meson_venci_get_field(struct meson_drm *priv);
void meson_venc_enable_vsync(struct meson_drm *priv);
--
2.22.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 05/10] drm/meson: venc: make drm_display_mode const
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
Before switching to bridge funcs, make sure drm_display_mode is passed
as const to the venc functions.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_venc.c | 2 +-
drivers/gpu/drm/meson/meson_venc.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index 4efd7864d5bf..a9ab78970bfe 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -946,7 +946,7 @@ bool meson_venc_hdmi_venc_repeat(int vic)
EXPORT_SYMBOL_GPL(meson_venc_hdmi_venc_repeat);
void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
- struct drm_display_mode *mode)
+ const struct drm_display_mode *mode)
{
union meson_hdmi_venc_mode *vmode = NULL;
union meson_hdmi_venc_mode vmode_dmt;
diff --git a/drivers/gpu/drm/meson/meson_venc.h b/drivers/gpu/drm/meson/meson_venc.h
index 576768bdd08d..1abdcbdf51c0 100644
--- a/drivers/gpu/drm/meson/meson_venc.h
+++ b/drivers/gpu/drm/meson/meson_venc.h
@@ -60,7 +60,7 @@ extern struct meson_cvbs_enci_mode meson_cvbs_enci_ntsc;
void meson_venci_cvbs_mode_set(struct meson_drm *priv,
struct meson_cvbs_enci_mode *mode);
void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
- struct drm_display_mode *mode);
+ const struct drm_display_mode *mode);
unsigned int meson_venci_get_field(struct meson_drm *priv);
void meson_venc_enable_vsync(struct meson_drm *priv);
--
2.22.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 05/10] drm/meson: venc: make drm_display_mode const
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
Before switching to bridge funcs, make sure drm_display_mode is passed
as const to the venc functions.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_venc.c | 2 +-
drivers/gpu/drm/meson/meson_venc.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index 4efd7864d5bf..a9ab78970bfe 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -946,7 +946,7 @@ bool meson_venc_hdmi_venc_repeat(int vic)
EXPORT_SYMBOL_GPL(meson_venc_hdmi_venc_repeat);
void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
- struct drm_display_mode *mode)
+ const struct drm_display_mode *mode)
{
union meson_hdmi_venc_mode *vmode = NULL;
union meson_hdmi_venc_mode vmode_dmt;
diff --git a/drivers/gpu/drm/meson/meson_venc.h b/drivers/gpu/drm/meson/meson_venc.h
index 576768bdd08d..1abdcbdf51c0 100644
--- a/drivers/gpu/drm/meson/meson_venc.h
+++ b/drivers/gpu/drm/meson/meson_venc.h
@@ -60,7 +60,7 @@ extern struct meson_cvbs_enci_mode meson_cvbs_enci_ntsc;
void meson_venci_cvbs_mode_set(struct meson_drm *priv,
struct meson_cvbs_enci_mode *mode);
void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
- struct drm_display_mode *mode);
+ const struct drm_display_mode *mode);
unsigned int meson_venci_get_field(struct meson_drm *priv);
void meson_venc_enable_vsync(struct meson_drm *priv);
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 06/10] drm/meson: meson_dw_hdmi: add bridge and switch to drm_bridge_funcs
2019-12-18 15:46 ` Neil Armstrong
(?)
@ 2019-12-18 15:46 ` Neil Armstrong
-1 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: Neil Armstrong, linux-amlogic, dri-devel, linux-kernel
Switch the dw-hdmi driver to drm_bridge_funcs by implementing a new local
bridge, connecting it to the dw-hdmi bridge, then implement the
atomic_get_input_bus_fmts/atomic_get_output_bus_fmts.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 98 ++++++++++++++++++++++-----
1 file changed, 80 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 3bb7ffe5fc39..8729575777d5 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -16,6 +16,7 @@
#include <drm/bridge/dw_hdmi.h>
#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
#include <drm/drm_device.h>
#include <drm/drm_edid.h>
#include <drm/drm_probe_helper.h>
@@ -135,6 +136,7 @@ struct meson_dw_hdmi_data {
struct meson_dw_hdmi {
struct drm_encoder encoder;
+ struct drm_bridge bridge;
struct dw_hdmi_plat_data dw_plat_data;
struct meson_drm *priv;
struct device *dev;
@@ -151,6 +153,8 @@ struct meson_dw_hdmi {
};
#define encoder_to_meson_dw_hdmi(x) \
container_of(x, struct meson_dw_hdmi, encoder)
+#define bridge_to_meson_dw_hdmi(x) \
+ container_of(x, struct meson_dw_hdmi, bridge)
static inline int dw_hdmi_is_compatible(struct meson_dw_hdmi *dw_hdmi,
const char *compat)
@@ -368,7 +372,7 @@ static inline void meson_dw_hdmi_phy_reset(struct meson_dw_hdmi *dw_hdmi)
}
static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
- struct drm_display_mode *mode)
+ const struct drm_display_mode *mode)
{
struct meson_drm *priv = dw_hdmi->priv;
int vic = drm_match_cea_mode(mode);
@@ -663,6 +667,10 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
/* Encoder */
+static const u32 meson_dw_hdmi_out_bus_fmts[] = {
+ MEDIA_BUS_FMT_YUV8_1X24,
+};
+
static void meson_venc_hdmi_encoder_destroy(struct drm_encoder *encoder)
{
drm_encoder_cleanup(encoder);
@@ -672,16 +680,63 @@ static const struct drm_encoder_funcs meson_venc_hdmi_encoder_funcs = {
.destroy = meson_venc_hdmi_encoder_destroy,
};
-static int meson_venc_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
+static u32 *
+meson_venc_hdmi_encoder_get_out_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ unsigned int *num_output_fmts)
+{
+ u32 *output_fmts;
+
+ *num_output_fmts = ARRAY_SIZE(meson_dw_hdmi_out_bus_fmts);
+ output_fmts = kcalloc(*num_output_fmts, sizeof(*output_fmts),
+ GFP_KERNEL);
+ if (!output_fmts)
+ return NULL;
+
+ memcpy(output_fmts, meson_dw_hdmi_out_bus_fmts, *num_output_fmts);
+
+ return output_fmts;
+}
+
+static u32 *
+meson_venc_hdmi_encoder_get_inp_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ u32 output_fmt,
+ unsigned int *num_input_fmts)
+{
+ u32 *input_fmts = NULL;
+
+ if (output_fmt == meson_dw_hdmi_out_bus_fmts[0]) {
+ *num_input_fmts = 1;
+ input_fmts = kcalloc(*num_input_fmts,
+ sizeof(*input_fmts),
+ GFP_KERNEL);
+ if (!input_fmts)
+ return NULL;
+
+ input_fmts[0] = output_fmt;
+ } else {
+ *num_input_fmts = 0;
+ }
+
+ return input_fmts;
+}
+
+static int meson_venc_hdmi_encoder_atomic_check(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
return 0;
}
-static void meson_venc_hdmi_encoder_disable(struct drm_encoder *encoder)
+static void meson_venc_hdmi_encoder_disable(struct drm_bridge *bridge)
{
- struct meson_dw_hdmi *dw_hdmi = encoder_to_meson_dw_hdmi(encoder);
+ struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
struct meson_drm *priv = dw_hdmi->priv;
DRM_DEBUG_DRIVER("\n");
@@ -693,9 +748,9 @@ static void meson_venc_hdmi_encoder_disable(struct drm_encoder *encoder)
writel_relaxed(0, priv->io_base + _REG(ENCP_VIDEO_EN));
}
-static void meson_venc_hdmi_encoder_enable(struct drm_encoder *encoder)
+static void meson_venc_hdmi_encoder_enable(struct drm_bridge *bridge)
{
- struct meson_dw_hdmi *dw_hdmi = encoder_to_meson_dw_hdmi(encoder);
+ struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
struct meson_drm *priv = dw_hdmi->priv;
DRM_DEBUG_DRIVER("%s\n", priv->venc.hdmi_use_enci ? "VENCI" : "VENCP");
@@ -706,11 +761,11 @@ static void meson_venc_hdmi_encoder_enable(struct drm_encoder *encoder)
writel_relaxed(1, priv->io_base + _REG(ENCP_VIDEO_EN));
}
-static void meson_venc_hdmi_encoder_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
+static void meson_venc_hdmi_encoder_mode_set(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ const struct drm_display_mode *adjusted_mode)
{
- struct meson_dw_hdmi *dw_hdmi = encoder_to_meson_dw_hdmi(encoder);
+ struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
struct meson_drm *priv = dw_hdmi->priv;
int vic = drm_match_cea_mode(mode);
@@ -726,11 +781,12 @@ static void meson_venc_hdmi_encoder_mode_set(struct drm_encoder *encoder,
writel_relaxed(0, priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
}
-static const struct drm_encoder_helper_funcs
- meson_venc_hdmi_encoder_helper_funcs = {
- .atomic_check = meson_venc_hdmi_encoder_atomic_check,
- .disable = meson_venc_hdmi_encoder_disable,
+static const struct drm_bridge_funcs meson_venc_hdmi_encoder_bridge_funcs = {
.enable = meson_venc_hdmi_encoder_enable,
+ .disable = meson_venc_hdmi_encoder_disable,
+ .atomic_check = meson_venc_hdmi_encoder_atomic_check,
+ .atomic_get_output_bus_fmts = meson_venc_hdmi_encoder_get_out_bus_fmts,
+ .atomic_get_input_bus_fmts = meson_venc_hdmi_encoder_get_inp_bus_fmts,
.mode_set = meson_venc_hdmi_encoder_mode_set,
};
@@ -852,6 +908,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
struct drm_device *drm = data;
struct meson_drm *priv = drm->dev_private;
struct dw_hdmi_plat_data *dw_plat_data;
+ struct drm_bridge *next_bridge;
struct drm_encoder *encoder;
struct resource *res;
int irq;
@@ -953,8 +1010,6 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
/* Encoder */
- drm_encoder_helper_add(encoder, &meson_venc_hdmi_encoder_helper_funcs);
-
ret = drm_encoder_init(drm, encoder, &meson_venc_hdmi_encoder_funcs,
DRM_MODE_ENCODER_TMDS, "meson_hdmi");
if (ret) {
@@ -962,6 +1017,9 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
return ret;
}
+ meson_dw_hdmi->bridge.funcs = &meson_venc_hdmi_encoder_bridge_funcs;
+ drm_bridge_attach(encoder, &meson_dw_hdmi->bridge, NULL);
+
encoder->possible_crtcs = BIT(0);
DRM_DEBUG_DRIVER("encoder initialized\n");
@@ -984,11 +1042,15 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
platform_set_drvdata(pdev, meson_dw_hdmi);
- meson_dw_hdmi->hdmi = dw_hdmi_bind(pdev, encoder,
- &meson_dw_hdmi->dw_plat_data);
+ meson_dw_hdmi->hdmi = dw_hdmi_probe(pdev,
+ &meson_dw_hdmi->dw_plat_data);
if (IS_ERR(meson_dw_hdmi->hdmi))
return PTR_ERR(meson_dw_hdmi->hdmi);
+ next_bridge = of_drm_find_bridge(pdev->dev.of_node);
+ if (next_bridge)
+ drm_bridge_attach(encoder, next_bridge, &meson_dw_hdmi->bridge);
+
DRM_DEBUG_DRIVER("HDMI controller initialized\n");
return 0;
--
2.22.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 06/10] drm/meson: meson_dw_hdmi: add bridge and switch to drm_bridge_funcs
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
Switch the dw-hdmi driver to drm_bridge_funcs by implementing a new local
bridge, connecting it to the dw-hdmi bridge, then implement the
atomic_get_input_bus_fmts/atomic_get_output_bus_fmts.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 98 ++++++++++++++++++++++-----
1 file changed, 80 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 3bb7ffe5fc39..8729575777d5 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -16,6 +16,7 @@
#include <drm/bridge/dw_hdmi.h>
#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
#include <drm/drm_device.h>
#include <drm/drm_edid.h>
#include <drm/drm_probe_helper.h>
@@ -135,6 +136,7 @@ struct meson_dw_hdmi_data {
struct meson_dw_hdmi {
struct drm_encoder encoder;
+ struct drm_bridge bridge;
struct dw_hdmi_plat_data dw_plat_data;
struct meson_drm *priv;
struct device *dev;
@@ -151,6 +153,8 @@ struct meson_dw_hdmi {
};
#define encoder_to_meson_dw_hdmi(x) \
container_of(x, struct meson_dw_hdmi, encoder)
+#define bridge_to_meson_dw_hdmi(x) \
+ container_of(x, struct meson_dw_hdmi, bridge)
static inline int dw_hdmi_is_compatible(struct meson_dw_hdmi *dw_hdmi,
const char *compat)
@@ -368,7 +372,7 @@ static inline void meson_dw_hdmi_phy_reset(struct meson_dw_hdmi *dw_hdmi)
}
static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
- struct drm_display_mode *mode)
+ const struct drm_display_mode *mode)
{
struct meson_drm *priv = dw_hdmi->priv;
int vic = drm_match_cea_mode(mode);
@@ -663,6 +667,10 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
/* Encoder */
+static const u32 meson_dw_hdmi_out_bus_fmts[] = {
+ MEDIA_BUS_FMT_YUV8_1X24,
+};
+
static void meson_venc_hdmi_encoder_destroy(struct drm_encoder *encoder)
{
drm_encoder_cleanup(encoder);
@@ -672,16 +680,63 @@ static const struct drm_encoder_funcs meson_venc_hdmi_encoder_funcs = {
.destroy = meson_venc_hdmi_encoder_destroy,
};
-static int meson_venc_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
+static u32 *
+meson_venc_hdmi_encoder_get_out_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ unsigned int *num_output_fmts)
+{
+ u32 *output_fmts;
+
+ *num_output_fmts = ARRAY_SIZE(meson_dw_hdmi_out_bus_fmts);
+ output_fmts = kcalloc(*num_output_fmts, sizeof(*output_fmts),
+ GFP_KERNEL);
+ if (!output_fmts)
+ return NULL;
+
+ memcpy(output_fmts, meson_dw_hdmi_out_bus_fmts, *num_output_fmts);
+
+ return output_fmts;
+}
+
+static u32 *
+meson_venc_hdmi_encoder_get_inp_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ u32 output_fmt,
+ unsigned int *num_input_fmts)
+{
+ u32 *input_fmts = NULL;
+
+ if (output_fmt == meson_dw_hdmi_out_bus_fmts[0]) {
+ *num_input_fmts = 1;
+ input_fmts = kcalloc(*num_input_fmts,
+ sizeof(*input_fmts),
+ GFP_KERNEL);
+ if (!input_fmts)
+ return NULL;
+
+ input_fmts[0] = output_fmt;
+ } else {
+ *num_input_fmts = 0;
+ }
+
+ return input_fmts;
+}
+
+static int meson_venc_hdmi_encoder_atomic_check(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
return 0;
}
-static void meson_venc_hdmi_encoder_disable(struct drm_encoder *encoder)
+static void meson_venc_hdmi_encoder_disable(struct drm_bridge *bridge)
{
- struct meson_dw_hdmi *dw_hdmi = encoder_to_meson_dw_hdmi(encoder);
+ struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
struct meson_drm *priv = dw_hdmi->priv;
DRM_DEBUG_DRIVER("\n");
@@ -693,9 +748,9 @@ static void meson_venc_hdmi_encoder_disable(struct drm_encoder *encoder)
writel_relaxed(0, priv->io_base + _REG(ENCP_VIDEO_EN));
}
-static void meson_venc_hdmi_encoder_enable(struct drm_encoder *encoder)
+static void meson_venc_hdmi_encoder_enable(struct drm_bridge *bridge)
{
- struct meson_dw_hdmi *dw_hdmi = encoder_to_meson_dw_hdmi(encoder);
+ struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
struct meson_drm *priv = dw_hdmi->priv;
DRM_DEBUG_DRIVER("%s\n", priv->venc.hdmi_use_enci ? "VENCI" : "VENCP");
@@ -706,11 +761,11 @@ static void meson_venc_hdmi_encoder_enable(struct drm_encoder *encoder)
writel_relaxed(1, priv->io_base + _REG(ENCP_VIDEO_EN));
}
-static void meson_venc_hdmi_encoder_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
+static void meson_venc_hdmi_encoder_mode_set(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ const struct drm_display_mode *adjusted_mode)
{
- struct meson_dw_hdmi *dw_hdmi = encoder_to_meson_dw_hdmi(encoder);
+ struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
struct meson_drm *priv = dw_hdmi->priv;
int vic = drm_match_cea_mode(mode);
@@ -726,11 +781,12 @@ static void meson_venc_hdmi_encoder_mode_set(struct drm_encoder *encoder,
writel_relaxed(0, priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
}
-static const struct drm_encoder_helper_funcs
- meson_venc_hdmi_encoder_helper_funcs = {
- .atomic_check = meson_venc_hdmi_encoder_atomic_check,
- .disable = meson_venc_hdmi_encoder_disable,
+static const struct drm_bridge_funcs meson_venc_hdmi_encoder_bridge_funcs = {
.enable = meson_venc_hdmi_encoder_enable,
+ .disable = meson_venc_hdmi_encoder_disable,
+ .atomic_check = meson_venc_hdmi_encoder_atomic_check,
+ .atomic_get_output_bus_fmts = meson_venc_hdmi_encoder_get_out_bus_fmts,
+ .atomic_get_input_bus_fmts = meson_venc_hdmi_encoder_get_inp_bus_fmts,
.mode_set = meson_venc_hdmi_encoder_mode_set,
};
@@ -852,6 +908,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
struct drm_device *drm = data;
struct meson_drm *priv = drm->dev_private;
struct dw_hdmi_plat_data *dw_plat_data;
+ struct drm_bridge *next_bridge;
struct drm_encoder *encoder;
struct resource *res;
int irq;
@@ -953,8 +1010,6 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
/* Encoder */
- drm_encoder_helper_add(encoder, &meson_venc_hdmi_encoder_helper_funcs);
-
ret = drm_encoder_init(drm, encoder, &meson_venc_hdmi_encoder_funcs,
DRM_MODE_ENCODER_TMDS, "meson_hdmi");
if (ret) {
@@ -962,6 +1017,9 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
return ret;
}
+ meson_dw_hdmi->bridge.funcs = &meson_venc_hdmi_encoder_bridge_funcs;
+ drm_bridge_attach(encoder, &meson_dw_hdmi->bridge, NULL);
+
encoder->possible_crtcs = BIT(0);
DRM_DEBUG_DRIVER("encoder initialized\n");
@@ -984,11 +1042,15 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
platform_set_drvdata(pdev, meson_dw_hdmi);
- meson_dw_hdmi->hdmi = dw_hdmi_bind(pdev, encoder,
- &meson_dw_hdmi->dw_plat_data);
+ meson_dw_hdmi->hdmi = dw_hdmi_probe(pdev,
+ &meson_dw_hdmi->dw_plat_data);
if (IS_ERR(meson_dw_hdmi->hdmi))
return PTR_ERR(meson_dw_hdmi->hdmi);
+ next_bridge = of_drm_find_bridge(pdev->dev.of_node);
+ if (next_bridge)
+ drm_bridge_attach(encoder, next_bridge, &meson_dw_hdmi->bridge);
+
DRM_DEBUG_DRIVER("HDMI controller initialized\n");
return 0;
--
2.22.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 06/10] drm/meson: meson_dw_hdmi: add bridge and switch to drm_bridge_funcs
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
Switch the dw-hdmi driver to drm_bridge_funcs by implementing a new local
bridge, connecting it to the dw-hdmi bridge, then implement the
atomic_get_input_bus_fmts/atomic_get_output_bus_fmts.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 98 ++++++++++++++++++++++-----
1 file changed, 80 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 3bb7ffe5fc39..8729575777d5 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -16,6 +16,7 @@
#include <drm/bridge/dw_hdmi.h>
#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
#include <drm/drm_device.h>
#include <drm/drm_edid.h>
#include <drm/drm_probe_helper.h>
@@ -135,6 +136,7 @@ struct meson_dw_hdmi_data {
struct meson_dw_hdmi {
struct drm_encoder encoder;
+ struct drm_bridge bridge;
struct dw_hdmi_plat_data dw_plat_data;
struct meson_drm *priv;
struct device *dev;
@@ -151,6 +153,8 @@ struct meson_dw_hdmi {
};
#define encoder_to_meson_dw_hdmi(x) \
container_of(x, struct meson_dw_hdmi, encoder)
+#define bridge_to_meson_dw_hdmi(x) \
+ container_of(x, struct meson_dw_hdmi, bridge)
static inline int dw_hdmi_is_compatible(struct meson_dw_hdmi *dw_hdmi,
const char *compat)
@@ -368,7 +372,7 @@ static inline void meson_dw_hdmi_phy_reset(struct meson_dw_hdmi *dw_hdmi)
}
static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
- struct drm_display_mode *mode)
+ const struct drm_display_mode *mode)
{
struct meson_drm *priv = dw_hdmi->priv;
int vic = drm_match_cea_mode(mode);
@@ -663,6 +667,10 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
/* Encoder */
+static const u32 meson_dw_hdmi_out_bus_fmts[] = {
+ MEDIA_BUS_FMT_YUV8_1X24,
+};
+
static void meson_venc_hdmi_encoder_destroy(struct drm_encoder *encoder)
{
drm_encoder_cleanup(encoder);
@@ -672,16 +680,63 @@ static const struct drm_encoder_funcs meson_venc_hdmi_encoder_funcs = {
.destroy = meson_venc_hdmi_encoder_destroy,
};
-static int meson_venc_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
+static u32 *
+meson_venc_hdmi_encoder_get_out_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ unsigned int *num_output_fmts)
+{
+ u32 *output_fmts;
+
+ *num_output_fmts = ARRAY_SIZE(meson_dw_hdmi_out_bus_fmts);
+ output_fmts = kcalloc(*num_output_fmts, sizeof(*output_fmts),
+ GFP_KERNEL);
+ if (!output_fmts)
+ return NULL;
+
+ memcpy(output_fmts, meson_dw_hdmi_out_bus_fmts, *num_output_fmts);
+
+ return output_fmts;
+}
+
+static u32 *
+meson_venc_hdmi_encoder_get_inp_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ u32 output_fmt,
+ unsigned int *num_input_fmts)
+{
+ u32 *input_fmts = NULL;
+
+ if (output_fmt == meson_dw_hdmi_out_bus_fmts[0]) {
+ *num_input_fmts = 1;
+ input_fmts = kcalloc(*num_input_fmts,
+ sizeof(*input_fmts),
+ GFP_KERNEL);
+ if (!input_fmts)
+ return NULL;
+
+ input_fmts[0] = output_fmt;
+ } else {
+ *num_input_fmts = 0;
+ }
+
+ return input_fmts;
+}
+
+static int meson_venc_hdmi_encoder_atomic_check(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
return 0;
}
-static void meson_venc_hdmi_encoder_disable(struct drm_encoder *encoder)
+static void meson_venc_hdmi_encoder_disable(struct drm_bridge *bridge)
{
- struct meson_dw_hdmi *dw_hdmi = encoder_to_meson_dw_hdmi(encoder);
+ struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
struct meson_drm *priv = dw_hdmi->priv;
DRM_DEBUG_DRIVER("\n");
@@ -693,9 +748,9 @@ static void meson_venc_hdmi_encoder_disable(struct drm_encoder *encoder)
writel_relaxed(0, priv->io_base + _REG(ENCP_VIDEO_EN));
}
-static void meson_venc_hdmi_encoder_enable(struct drm_encoder *encoder)
+static void meson_venc_hdmi_encoder_enable(struct drm_bridge *bridge)
{
- struct meson_dw_hdmi *dw_hdmi = encoder_to_meson_dw_hdmi(encoder);
+ struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
struct meson_drm *priv = dw_hdmi->priv;
DRM_DEBUG_DRIVER("%s\n", priv->venc.hdmi_use_enci ? "VENCI" : "VENCP");
@@ -706,11 +761,11 @@ static void meson_venc_hdmi_encoder_enable(struct drm_encoder *encoder)
writel_relaxed(1, priv->io_base + _REG(ENCP_VIDEO_EN));
}
-static void meson_venc_hdmi_encoder_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
+static void meson_venc_hdmi_encoder_mode_set(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ const struct drm_display_mode *adjusted_mode)
{
- struct meson_dw_hdmi *dw_hdmi = encoder_to_meson_dw_hdmi(encoder);
+ struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
struct meson_drm *priv = dw_hdmi->priv;
int vic = drm_match_cea_mode(mode);
@@ -726,11 +781,12 @@ static void meson_venc_hdmi_encoder_mode_set(struct drm_encoder *encoder,
writel_relaxed(0, priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
}
-static const struct drm_encoder_helper_funcs
- meson_venc_hdmi_encoder_helper_funcs = {
- .atomic_check = meson_venc_hdmi_encoder_atomic_check,
- .disable = meson_venc_hdmi_encoder_disable,
+static const struct drm_bridge_funcs meson_venc_hdmi_encoder_bridge_funcs = {
.enable = meson_venc_hdmi_encoder_enable,
+ .disable = meson_venc_hdmi_encoder_disable,
+ .atomic_check = meson_venc_hdmi_encoder_atomic_check,
+ .atomic_get_output_bus_fmts = meson_venc_hdmi_encoder_get_out_bus_fmts,
+ .atomic_get_input_bus_fmts = meson_venc_hdmi_encoder_get_inp_bus_fmts,
.mode_set = meson_venc_hdmi_encoder_mode_set,
};
@@ -852,6 +908,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
struct drm_device *drm = data;
struct meson_drm *priv = drm->dev_private;
struct dw_hdmi_plat_data *dw_plat_data;
+ struct drm_bridge *next_bridge;
struct drm_encoder *encoder;
struct resource *res;
int irq;
@@ -953,8 +1010,6 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
/* Encoder */
- drm_encoder_helper_add(encoder, &meson_venc_hdmi_encoder_helper_funcs);
-
ret = drm_encoder_init(drm, encoder, &meson_venc_hdmi_encoder_funcs,
DRM_MODE_ENCODER_TMDS, "meson_hdmi");
if (ret) {
@@ -962,6 +1017,9 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
return ret;
}
+ meson_dw_hdmi->bridge.funcs = &meson_venc_hdmi_encoder_bridge_funcs;
+ drm_bridge_attach(encoder, &meson_dw_hdmi->bridge, NULL);
+
encoder->possible_crtcs = BIT(0);
DRM_DEBUG_DRIVER("encoder initialized\n");
@@ -984,11 +1042,15 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
platform_set_drvdata(pdev, meson_dw_hdmi);
- meson_dw_hdmi->hdmi = dw_hdmi_bind(pdev, encoder,
- &meson_dw_hdmi->dw_plat_data);
+ meson_dw_hdmi->hdmi = dw_hdmi_probe(pdev,
+ &meson_dw_hdmi->dw_plat_data);
if (IS_ERR(meson_dw_hdmi->hdmi))
return PTR_ERR(meson_dw_hdmi->hdmi);
+ next_bridge = of_drm_find_bridge(pdev->dev.of_node);
+ if (next_bridge)
+ drm_bridge_attach(encoder, next_bridge, &meson_dw_hdmi->bridge);
+
DRM_DEBUG_DRIVER("HDMI controller initialized\n");
return 0;
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 07/10] drm/meson: dw-hdmi: stop enforcing input_bus_format
2019-12-18 15:46 ` Neil Armstrong
(?)
@ 2019-12-18 15:46 ` Neil Armstrong
-1 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: Neil Armstrong, linux-amlogic, dri-devel, linux-kernel
To allow using formats from negotiation, stop enforcing input_bus_format
in the private dw-plat-data struct.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 8729575777d5..69926d5d8756 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -1032,7 +1032,6 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
dw_plat_data->phy_ops = &meson_dw_hdmi_phy_ops;
dw_plat_data->phy_name = "meson_dw_hdmi_phy";
dw_plat_data->phy_data = meson_dw_hdmi;
- dw_plat_data->input_bus_format = MEDIA_BUS_FMT_YUV8_1X24;
dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709;
if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
--
2.22.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 07/10] drm/meson: dw-hdmi: stop enforcing input_bus_format
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
To allow using formats from negotiation, stop enforcing input_bus_format
in the private dw-plat-data struct.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 8729575777d5..69926d5d8756 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -1032,7 +1032,6 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
dw_plat_data->phy_ops = &meson_dw_hdmi_phy_ops;
dw_plat_data->phy_name = "meson_dw_hdmi_phy";
dw_plat_data->phy_data = meson_dw_hdmi;
- dw_plat_data->input_bus_format = MEDIA_BUS_FMT_YUV8_1X24;
dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709;
if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
--
2.22.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 07/10] drm/meson: dw-hdmi: stop enforcing input_bus_format
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
To allow using formats from negotiation, stop enforcing input_bus_format
in the private dw-plat-data struct.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 8729575777d5..69926d5d8756 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -1032,7 +1032,6 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
dw_plat_data->phy_ops = &meson_dw_hdmi_phy_ops;
dw_plat_data->phy_name = "meson_dw_hdmi_phy";
dw_plat_data->phy_data = meson_dw_hdmi;
- dw_plat_data->input_bus_format = MEDIA_BUS_FMT_YUV8_1X24;
dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709;
if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 08/10] drm/meson: venc: add support for YUV420 setup
2019-12-18 15:46 ` Neil Armstrong
(?)
@ 2019-12-18 15:46 ` Neil Armstrong
-1 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: Neil Armstrong, linux-amlogic, dri-devel, linux-kernel
This patch adds encoding support for the YUV420 output from the
Amlogic Meson SoCs Video Processing Unit to the HDMI Controller.
The YUV420 is obtained by generating a YUV444 pixel stream like
the classic HDMI display modes, but then the Video Encoder output
can be configured to down-sample the YUV444 pixel stream to a YUV420
stream.
In addition if pixel stream down-sampling, the Y Cb Cr components must
also be mapped differently to align with the HDMI2.0 specifications.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 3 ++-
drivers/gpu/drm/meson/meson_venc.c | 8 +++++---
drivers/gpu/drm/meson/meson_venc.h | 2 ++
3 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 69926d5d8756..75c133a048d3 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -772,7 +772,8 @@ static void meson_venc_hdmi_encoder_mode_set(struct drm_bridge *bridge,
DRM_DEBUG_DRIVER("\"%s\" vic %d\n", mode->name, vic);
/* VENC + VENC-DVI Mode setup */
- meson_venc_hdmi_mode_set(priv, vic, mode);
+ meson_venc_hdmi_mode_set(priv, vic, ycrcb_map, false,
+ VPU_HDMI_OUTPUT_CBYCR);
/* VCLK Set clock */
dw_hdmi_set_vclk(dw_hdmi, mode);
diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index a9ab78970bfe..f93c725b6f02 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -946,6 +946,8 @@ bool meson_venc_hdmi_venc_repeat(int vic)
EXPORT_SYMBOL_GPL(meson_venc_hdmi_venc_repeat);
void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
+ unsigned int ycrcb_map,
+ bool yuv420_mode,
const struct drm_display_mode *mode)
{
union meson_hdmi_venc_mode *vmode = NULL;
@@ -1528,14 +1530,14 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
if (mode->flags & DRM_MODE_FLAG_PVSYNC)
reg |= VPU_HDMI_INV_VSYNC;
- /* Output data format: CbYCr */
- reg |= VPU_HDMI_OUTPUT_CBYCR;
+ /* Output data format */
+ reg |= ycrcb_map;
/*
* Write rate to the async FIFO between VENC and HDMI.
* One write every 2 wr_clk.
*/
- if (venc_repeat)
+ if (venc_repeat || yuv420_mode)
reg |= VPU_HDMI_WR_RATE(2);
/*
diff --git a/drivers/gpu/drm/meson/meson_venc.h b/drivers/gpu/drm/meson/meson_venc.h
index 1abdcbdf51c0..9138255ffc9e 100644
--- a/drivers/gpu/drm/meson/meson_venc.h
+++ b/drivers/gpu/drm/meson/meson_venc.h
@@ -60,6 +60,8 @@ extern struct meson_cvbs_enci_mode meson_cvbs_enci_ntsc;
void meson_venci_cvbs_mode_set(struct meson_drm *priv,
struct meson_cvbs_enci_mode *mode);
void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
+ unsigned int ycrcb_map,
+ bool yuv420_mode,
const struct drm_display_mode *mode);
unsigned int meson_venci_get_field(struct meson_drm *priv);
--
2.22.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 08/10] drm/meson: venc: add support for YUV420 setup
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
This patch adds encoding support for the YUV420 output from the
Amlogic Meson SoCs Video Processing Unit to the HDMI Controller.
The YUV420 is obtained by generating a YUV444 pixel stream like
the classic HDMI display modes, but then the Video Encoder output
can be configured to down-sample the YUV444 pixel stream to a YUV420
stream.
In addition if pixel stream down-sampling, the Y Cb Cr components must
also be mapped differently to align with the HDMI2.0 specifications.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 3 ++-
drivers/gpu/drm/meson/meson_venc.c | 8 +++++---
drivers/gpu/drm/meson/meson_venc.h | 2 ++
3 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 69926d5d8756..75c133a048d3 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -772,7 +772,8 @@ static void meson_venc_hdmi_encoder_mode_set(struct drm_bridge *bridge,
DRM_DEBUG_DRIVER("\"%s\" vic %d\n", mode->name, vic);
/* VENC + VENC-DVI Mode setup */
- meson_venc_hdmi_mode_set(priv, vic, mode);
+ meson_venc_hdmi_mode_set(priv, vic, ycrcb_map, false,
+ VPU_HDMI_OUTPUT_CBYCR);
/* VCLK Set clock */
dw_hdmi_set_vclk(dw_hdmi, mode);
diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index a9ab78970bfe..f93c725b6f02 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -946,6 +946,8 @@ bool meson_venc_hdmi_venc_repeat(int vic)
EXPORT_SYMBOL_GPL(meson_venc_hdmi_venc_repeat);
void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
+ unsigned int ycrcb_map,
+ bool yuv420_mode,
const struct drm_display_mode *mode)
{
union meson_hdmi_venc_mode *vmode = NULL;
@@ -1528,14 +1530,14 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
if (mode->flags & DRM_MODE_FLAG_PVSYNC)
reg |= VPU_HDMI_INV_VSYNC;
- /* Output data format: CbYCr */
- reg |= VPU_HDMI_OUTPUT_CBYCR;
+ /* Output data format */
+ reg |= ycrcb_map;
/*
* Write rate to the async FIFO between VENC and HDMI.
* One write every 2 wr_clk.
*/
- if (venc_repeat)
+ if (venc_repeat || yuv420_mode)
reg |= VPU_HDMI_WR_RATE(2);
/*
diff --git a/drivers/gpu/drm/meson/meson_venc.h b/drivers/gpu/drm/meson/meson_venc.h
index 1abdcbdf51c0..9138255ffc9e 100644
--- a/drivers/gpu/drm/meson/meson_venc.h
+++ b/drivers/gpu/drm/meson/meson_venc.h
@@ -60,6 +60,8 @@ extern struct meson_cvbs_enci_mode meson_cvbs_enci_ntsc;
void meson_venci_cvbs_mode_set(struct meson_drm *priv,
struct meson_cvbs_enci_mode *mode);
void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
+ unsigned int ycrcb_map,
+ bool yuv420_mode,
const struct drm_display_mode *mode);
unsigned int meson_venci_get_field(struct meson_drm *priv);
--
2.22.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 08/10] drm/meson: venc: add support for YUV420 setup
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
This patch adds encoding support for the YUV420 output from the
Amlogic Meson SoCs Video Processing Unit to the HDMI Controller.
The YUV420 is obtained by generating a YUV444 pixel stream like
the classic HDMI display modes, but then the Video Encoder output
can be configured to down-sample the YUV444 pixel stream to a YUV420
stream.
In addition if pixel stream down-sampling, the Y Cb Cr components must
also be mapped differently to align with the HDMI2.0 specifications.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 3 ++-
drivers/gpu/drm/meson/meson_venc.c | 8 +++++---
drivers/gpu/drm/meson/meson_venc.h | 2 ++
3 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 69926d5d8756..75c133a048d3 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -772,7 +772,8 @@ static void meson_venc_hdmi_encoder_mode_set(struct drm_bridge *bridge,
DRM_DEBUG_DRIVER("\"%s\" vic %d\n", mode->name, vic);
/* VENC + VENC-DVI Mode setup */
- meson_venc_hdmi_mode_set(priv, vic, mode);
+ meson_venc_hdmi_mode_set(priv, vic, ycrcb_map, false,
+ VPU_HDMI_OUTPUT_CBYCR);
/* VCLK Set clock */
dw_hdmi_set_vclk(dw_hdmi, mode);
diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index a9ab78970bfe..f93c725b6f02 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -946,6 +946,8 @@ bool meson_venc_hdmi_venc_repeat(int vic)
EXPORT_SYMBOL_GPL(meson_venc_hdmi_venc_repeat);
void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
+ unsigned int ycrcb_map,
+ bool yuv420_mode,
const struct drm_display_mode *mode)
{
union meson_hdmi_venc_mode *vmode = NULL;
@@ -1528,14 +1530,14 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
if (mode->flags & DRM_MODE_FLAG_PVSYNC)
reg |= VPU_HDMI_INV_VSYNC;
- /* Output data format: CbYCr */
- reg |= VPU_HDMI_OUTPUT_CBYCR;
+ /* Output data format */
+ reg |= ycrcb_map;
/*
* Write rate to the async FIFO between VENC and HDMI.
* One write every 2 wr_clk.
*/
- if (venc_repeat)
+ if (venc_repeat || yuv420_mode)
reg |= VPU_HDMI_WR_RATE(2);
/*
diff --git a/drivers/gpu/drm/meson/meson_venc.h b/drivers/gpu/drm/meson/meson_venc.h
index 1abdcbdf51c0..9138255ffc9e 100644
--- a/drivers/gpu/drm/meson/meson_venc.h
+++ b/drivers/gpu/drm/meson/meson_venc.h
@@ -60,6 +60,8 @@ extern struct meson_cvbs_enci_mode meson_cvbs_enci_ntsc;
void meson_venci_cvbs_mode_set(struct meson_drm *priv,
struct meson_cvbs_enci_mode *mode);
void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
+ unsigned int ycrcb_map,
+ bool yuv420_mode,
const struct drm_display_mode *mode);
unsigned int meson_venci_get_field(struct meson_drm *priv);
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 09/10] drm/meson: vclk: add support for YUV420 setup
2019-12-18 15:46 ` Neil Armstrong
(?)
@ 2019-12-18 15:46 ` Neil Armstrong
-1 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: Neil Armstrong, linux-amlogic, dri-devel, linux-kernel
This patch adds clocking support for the YUV420 output from the
Amlogic Meson SoCs Video Processing Unit to the HDMI Controller.
The YUV420 is obtained by generating a YUV444 pixel stream like
the classic HDMI display modes, but then the Video Encoder output
can be configured to down-sample the YUV444 pixel stream to a YUV420
stream.
This mode needs a different clock generation scheme since the TMDS PHY
clock must match the 10x ratio with the YUV420 pixel clock, but
the video encoder must run at 2x the pixel clock.
This patch adds the TMDS PHY clock value in all the video clock setup
in order to better support these specific uses cases and switch
to the Common Clock framework for clocks handling in the future.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 24 ++++---
drivers/gpu/drm/meson/meson_vclk.c | 93 +++++++++++++++++++------
drivers/gpu/drm/meson/meson_vclk.h | 7 +-
drivers/gpu/drm/meson/meson_venc_cvbs.c | 3 +-
4 files changed, 93 insertions(+), 34 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 75c133a048d3..ce27dfde509e 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -376,15 +376,19 @@ static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
{
struct meson_drm *priv = dw_hdmi->priv;
int vic = drm_match_cea_mode(mode);
+ unsigned int phy_freq;
unsigned int vclk_freq;
unsigned int venc_freq;
unsigned int hdmi_freq;
vclk_freq = mode->clock;
+ /* TMDS clock is pixel_clock * 10 */
+ phy_freq = vclk_freq * 10;
+
if (!vic) {
- meson_vclk_setup(priv, MESON_VCLK_TARGET_DMT, vclk_freq,
- vclk_freq, vclk_freq, false);
+ meson_vclk_setup(priv, MESON_VCLK_TARGET_DMT, phy_freq,
+ vclk_freq, vclk_freq, vclk_freq, false);
return;
}
@@ -402,11 +406,11 @@ static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
venc_freq /= 2;
- DRM_DEBUG_DRIVER("vclk:%d venc=%d hdmi=%d enci=%d\n",
- vclk_freq, venc_freq, hdmi_freq,
+ DRM_DEBUG_DRIVER("vclk:%d phy=%d venc=%d hdmi=%d enci=%d\n",
+ phy_freq, vclk_freq, venc_freq, hdmi_freq,
priv->venc.hdmi_use_enci);
- meson_vclk_setup(priv, MESON_VCLK_TARGET_HDMI, vclk_freq,
+ meson_vclk_setup(priv, MESON_VCLK_TARGET_HDMI, phy_freq, vclk_freq,
venc_freq, hdmi_freq, priv->venc.hdmi_use_enci);
}
@@ -617,6 +621,7 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
const struct drm_display_mode *mode)
{
struct meson_drm *priv = connector->dev->dev_private;
+ unsigned int phy_freq;
unsigned int vclk_freq;
unsigned int venc_freq;
unsigned int hdmi_freq;
@@ -643,6 +648,9 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
vclk_freq = mode->clock;
+ /* TMDS clock is pixel_clock * 10 */
+ phy_freq = vclk_freq * 10;
+
/* 480i/576i needs global pixel doubling */
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
vclk_freq *= 2;
@@ -659,10 +667,10 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
venc_freq /= 2;
- dev_dbg(connector->dev->dev, "%s: vclk:%d venc=%d hdmi=%d\n", __func__,
- vclk_freq, venc_freq, hdmi_freq);
+ dev_dbg(connector->dev->dev, "%s: vclk:%d phy=%d venc=%d hdmi=%d\n",
+ __func__, phy_freq, vclk_freq, venc_freq, hdmi_freq);
- return meson_vclk_vic_supported_freq(vclk_freq);
+ return meson_vclk_vic_supported_freq(phy_freq, vclk_freq);
}
/* Encoder */
diff --git a/drivers/gpu/drm/meson/meson_vclk.c b/drivers/gpu/drm/meson/meson_vclk.c
index f690793ae2d5..fdf26dac9fa8 100644
--- a/drivers/gpu/drm/meson/meson_vclk.c
+++ b/drivers/gpu/drm/meson/meson_vclk.c
@@ -354,12 +354,17 @@ enum {
/* 2970 /1 /1 /1 /5 /2 => /1 /1 */
MESON_VCLK_HDMI_297000,
/* 5940 /1 /1 /2 /5 /1 => /1 /1 */
- MESON_VCLK_HDMI_594000
+ MESON_VCLK_HDMI_594000,
+/* 2970 /1 /1 /1 /5 /1 => /1 /2 */
+ MESON_VCLK_HDMI_594000_YUV420,
};
struct meson_vclk_params {
+ unsigned int pll_freq;
+ unsigned int phy_freq;
+ unsigned int vclk_freq;
+ unsigned int venc_freq;
unsigned int pixel_freq;
- unsigned int pll_base_freq;
unsigned int pll_od1;
unsigned int pll_od2;
unsigned int pll_od3;
@@ -367,8 +372,11 @@ struct meson_vclk_params {
unsigned int vclk_div;
} params[] = {
[MESON_VCLK_HDMI_ENCI_54000] = {
+ .pll_freq = 4320000,
+ .phy_freq = 270000,
+ .vclk_freq = 54000,
+ .venc_freq = 54000,
.pixel_freq = 54000,
- .pll_base_freq = 4320000,
.pll_od1 = 4,
.pll_od2 = 4,
.pll_od3 = 1,
@@ -376,8 +384,11 @@ struct meson_vclk_params {
.vclk_div = 1,
},
[MESON_VCLK_HDMI_DDR_54000] = {
- .pixel_freq = 54000,
- .pll_base_freq = 4320000,
+ .pll_freq = 4320000,
+ .phy_freq = 270000,
+ .vclk_freq = 54000,
+ .venc_freq = 54000,
+ .pixel_freq = 27000,
.pll_od1 = 4,
.pll_od2 = 4,
.pll_od3 = 1,
@@ -385,8 +396,11 @@ struct meson_vclk_params {
.vclk_div = 1,
},
[MESON_VCLK_HDMI_DDR_148500] = {
- .pixel_freq = 148500,
- .pll_base_freq = 2970000,
+ .pll_freq = 2970000,
+ .phy_freq = 742500,
+ .vclk_freq = 148500,
+ .venc_freq = 148500,
+ .pixel_freq = 74250,
.pll_od1 = 4,
.pll_od2 = 1,
.pll_od3 = 1,
@@ -394,8 +408,11 @@ struct meson_vclk_params {
.vclk_div = 1,
},
[MESON_VCLK_HDMI_74250] = {
+ .pll_freq = 2970000,
+ .phy_freq = 742500,
+ .vclk_freq = 74250,
+ .venc_freq = 74250,
.pixel_freq = 74250,
- .pll_base_freq = 2970000,
.pll_od1 = 2,
.pll_od2 = 2,
.pll_od3 = 2,
@@ -403,8 +420,11 @@ struct meson_vclk_params {
.vclk_div = 1,
},
[MESON_VCLK_HDMI_148500] = {
+ .pll_freq = 2970000,
+ .phy_freq = 1485000,
+ .vclk_freq = 148500,
+ .venc_freq = 148500,
.pixel_freq = 148500,
- .pll_base_freq = 2970000,
.pll_od1 = 1,
.pll_od2 = 2,
.pll_od3 = 2,
@@ -412,8 +432,11 @@ struct meson_vclk_params {
.vclk_div = 1,
},
[MESON_VCLK_HDMI_297000] = {
+ .pll_freq = 5940000,
+ .phy_freq = 2970000,
+ .venc_freq = 297000,
+ .vclk_freq = 297000,
.pixel_freq = 297000,
- .pll_base_freq = 5940000,
.pll_od1 = 2,
.pll_od2 = 1,
.pll_od3 = 1,
@@ -421,14 +444,29 @@ struct meson_vclk_params {
.vclk_div = 2,
},
[MESON_VCLK_HDMI_594000] = {
+ .pll_freq = 5940000,
+ .phy_freq = 5940000,
+ .venc_freq = 594000,
+ .vclk_freq = 594000,
.pixel_freq = 594000,
- .pll_base_freq = 5940000,
.pll_od1 = 1,
.pll_od2 = 1,
.pll_od3 = 2,
.vid_pll_div = VID_PLL_DIV_5,
.vclk_div = 1,
},
+ [MESON_VCLK_HDMI_594000_YUV420] = {
+ .pll_freq = 5940000,
+ .phy_freq = 2970000,
+ .venc_freq = 594000,
+ .vclk_freq = 594000,
+ .pixel_freq = 297000,
+ .pll_od1 = 2,
+ .pll_od2 = 1,
+ .pll_od3 = 1,
+ .vid_pll_div = VID_PLL_DIV_5,
+ .vclk_div = 1,
+ },
{ /* sentinel */ },
};
@@ -701,6 +739,7 @@ static void meson_hdmi_pll_generic_set(struct meson_drm *priv,
unsigned int od, m, frac, od1, od2, od3;
if (meson_hdmi_pll_find_params(priv, pll_freq, &m, &frac, &od)) {
+ /* OD2 goes to the PHY, and needs to be *10, so keep OD3=1 */
od3 = 1;
if (od < 4) {
od1 = 2;
@@ -723,21 +762,28 @@ static void meson_hdmi_pll_generic_set(struct meson_drm *priv,
}
enum drm_mode_status
-meson_vclk_vic_supported_freq(unsigned int freq)
+meson_vclk_vic_supported_freq(unsigned int phy_freq,
+ unsigned int vclk_freq)
{
int i;
- DRM_DEBUG_DRIVER("freq = %d\n", freq);
+ DRM_DEBUG_DRIVER("phy_freq = %d vclk_freq = %d\n",
+ phy_freq, vclk_freq);
for (i = 0 ; params[i].pixel_freq ; ++i) {
DRM_DEBUG_DRIVER("i = %d pixel_freq = %d alt = %d\n",
i, params[i].pixel_freq,
FREQ_1000_1001(params[i].pixel_freq));
+ DRM_DEBUG_DRIVER("i = %d phy_freq = %d alt = %d\n",
+ i, params[i].phy_freq,
+ FREQ_1000_1001(params[i].phy_freq/10)*10);
/* Match strict frequency */
- if (freq == params[i].pixel_freq)
+ if (phy_freq == params[i].phy_freq &&
+ vclk_freq == params[i].vclk_freq)
return MODE_OK;
/* Match 1000/1001 variant */
- if (freq == FREQ_1000_1001(params[i].pixel_freq))
+ if (phy_freq == (FREQ_1000_1001(params[i].phy_freq/10)*10) &&
+ vclk_freq == FREQ_1000_1001(params[i].vclk_freq))
return MODE_OK;
}
@@ -965,8 +1011,9 @@ static void meson_vclk_set(struct meson_drm *priv, unsigned int pll_base_freq,
}
void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
- unsigned int vclk_freq, unsigned int venc_freq,
- unsigned int dac_freq, bool hdmi_use_enci)
+ unsigned int phy_freq, unsigned int vclk_freq,
+ unsigned int venc_freq, unsigned int dac_freq,
+ bool hdmi_use_enci)
{
bool vic_alternate_clock = false;
unsigned int freq;
@@ -986,7 +1033,7 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
* - venc_div = 1
* - encp encoder
*/
- meson_vclk_set(priv, vclk_freq * 10, 0, 0, 0,
+ meson_vclk_set(priv, phy_freq, 0, 0, 0,
VID_PLL_DIV_5, 2, 1, 1, false, false);
return;
}
@@ -1008,9 +1055,11 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
}
for (freq = 0 ; params[freq].pixel_freq ; ++freq) {
- if (vclk_freq == params[freq].pixel_freq ||
- vclk_freq == FREQ_1000_1001(params[freq].pixel_freq)) {
- if (vclk_freq != params[freq].pixel_freq)
+ if ((phy_freq == params[freq].phy_freq ||
+ phy_freq == FREQ_1000_1001(params[freq].phy_freq/10)*10) &&
+ (vclk_freq == params[freq].vclk_freq ||
+ vclk_freq == FREQ_1000_1001(params[freq].vclk_freq))) {
+ if (vclk_freq != params[freq].vclk_freq)
vic_alternate_clock = true;
else
vic_alternate_clock = false;
@@ -1039,7 +1088,7 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
return;
}
- meson_vclk_set(priv, params[freq].pll_base_freq,
+ meson_vclk_set(priv, params[freq].pll_freq,
params[freq].pll_od1, params[freq].pll_od2,
params[freq].pll_od3, params[freq].vid_pll_div,
params[freq].vclk_div, hdmi_tx_div, venc_div,
diff --git a/drivers/gpu/drm/meson/meson_vclk.h b/drivers/gpu/drm/meson/meson_vclk.h
index b62125540aef..aed0ab2efa71 100644
--- a/drivers/gpu/drm/meson/meson_vclk.h
+++ b/drivers/gpu/drm/meson/meson_vclk.h
@@ -25,10 +25,11 @@ enum {
enum drm_mode_status
meson_vclk_dmt_supported_freq(struct meson_drm *priv, unsigned int freq);
enum drm_mode_status
-meson_vclk_vic_supported_freq(unsigned int freq);
+meson_vclk_vic_supported_freq(unsigned int phy_freq, unsigned int vclk_freq);
void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
- unsigned int vclk_freq, unsigned int venc_freq,
- unsigned int dac_freq, bool hdmi_use_enci);
+ unsigned int phy_freq, unsigned int vclk_freq,
+ unsigned int venc_freq, unsigned int dac_freq,
+ bool hdmi_use_enci);
#endif /* __MESON_VCLK_H */
diff --git a/drivers/gpu/drm/meson/meson_venc_cvbs.c b/drivers/gpu/drm/meson/meson_venc_cvbs.c
index 9ab27aecfcf3..bd95b8e95626 100644
--- a/drivers/gpu/drm/meson/meson_venc_cvbs.c
+++ b/drivers/gpu/drm/meson/meson_venc_cvbs.c
@@ -206,7 +206,8 @@ static void meson_venc_cvbs_encoder_mode_set(struct drm_encoder *encoder,
/* Setup 27MHz vclk2 for ENCI and VDAC */
meson_vclk_setup(priv, MESON_VCLK_TARGET_CVBS,
MESON_VCLK_CVBS, MESON_VCLK_CVBS,
- MESON_VCLK_CVBS, true);
+ MESON_VCLK_CVBS, MESON_VCLK_CVBS,
+ true);
break;
}
}
--
2.22.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 09/10] drm/meson: vclk: add support for YUV420 setup
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
This patch adds clocking support for the YUV420 output from the
Amlogic Meson SoCs Video Processing Unit to the HDMI Controller.
The YUV420 is obtained by generating a YUV444 pixel stream like
the classic HDMI display modes, but then the Video Encoder output
can be configured to down-sample the YUV444 pixel stream to a YUV420
stream.
This mode needs a different clock generation scheme since the TMDS PHY
clock must match the 10x ratio with the YUV420 pixel clock, but
the video encoder must run at 2x the pixel clock.
This patch adds the TMDS PHY clock value in all the video clock setup
in order to better support these specific uses cases and switch
to the Common Clock framework for clocks handling in the future.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 24 ++++---
drivers/gpu/drm/meson/meson_vclk.c | 93 +++++++++++++++++++------
drivers/gpu/drm/meson/meson_vclk.h | 7 +-
drivers/gpu/drm/meson/meson_venc_cvbs.c | 3 +-
4 files changed, 93 insertions(+), 34 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 75c133a048d3..ce27dfde509e 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -376,15 +376,19 @@ static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
{
struct meson_drm *priv = dw_hdmi->priv;
int vic = drm_match_cea_mode(mode);
+ unsigned int phy_freq;
unsigned int vclk_freq;
unsigned int venc_freq;
unsigned int hdmi_freq;
vclk_freq = mode->clock;
+ /* TMDS clock is pixel_clock * 10 */
+ phy_freq = vclk_freq * 10;
+
if (!vic) {
- meson_vclk_setup(priv, MESON_VCLK_TARGET_DMT, vclk_freq,
- vclk_freq, vclk_freq, false);
+ meson_vclk_setup(priv, MESON_VCLK_TARGET_DMT, phy_freq,
+ vclk_freq, vclk_freq, vclk_freq, false);
return;
}
@@ -402,11 +406,11 @@ static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
venc_freq /= 2;
- DRM_DEBUG_DRIVER("vclk:%d venc=%d hdmi=%d enci=%d\n",
- vclk_freq, venc_freq, hdmi_freq,
+ DRM_DEBUG_DRIVER("vclk:%d phy=%d venc=%d hdmi=%d enci=%d\n",
+ phy_freq, vclk_freq, venc_freq, hdmi_freq,
priv->venc.hdmi_use_enci);
- meson_vclk_setup(priv, MESON_VCLK_TARGET_HDMI, vclk_freq,
+ meson_vclk_setup(priv, MESON_VCLK_TARGET_HDMI, phy_freq, vclk_freq,
venc_freq, hdmi_freq, priv->venc.hdmi_use_enci);
}
@@ -617,6 +621,7 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
const struct drm_display_mode *mode)
{
struct meson_drm *priv = connector->dev->dev_private;
+ unsigned int phy_freq;
unsigned int vclk_freq;
unsigned int venc_freq;
unsigned int hdmi_freq;
@@ -643,6 +648,9 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
vclk_freq = mode->clock;
+ /* TMDS clock is pixel_clock * 10 */
+ phy_freq = vclk_freq * 10;
+
/* 480i/576i needs global pixel doubling */
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
vclk_freq *= 2;
@@ -659,10 +667,10 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
venc_freq /= 2;
- dev_dbg(connector->dev->dev, "%s: vclk:%d venc=%d hdmi=%d\n", __func__,
- vclk_freq, venc_freq, hdmi_freq);
+ dev_dbg(connector->dev->dev, "%s: vclk:%d phy=%d venc=%d hdmi=%d\n",
+ __func__, phy_freq, vclk_freq, venc_freq, hdmi_freq);
- return meson_vclk_vic_supported_freq(vclk_freq);
+ return meson_vclk_vic_supported_freq(phy_freq, vclk_freq);
}
/* Encoder */
diff --git a/drivers/gpu/drm/meson/meson_vclk.c b/drivers/gpu/drm/meson/meson_vclk.c
index f690793ae2d5..fdf26dac9fa8 100644
--- a/drivers/gpu/drm/meson/meson_vclk.c
+++ b/drivers/gpu/drm/meson/meson_vclk.c
@@ -354,12 +354,17 @@ enum {
/* 2970 /1 /1 /1 /5 /2 => /1 /1 */
MESON_VCLK_HDMI_297000,
/* 5940 /1 /1 /2 /5 /1 => /1 /1 */
- MESON_VCLK_HDMI_594000
+ MESON_VCLK_HDMI_594000,
+/* 2970 /1 /1 /1 /5 /1 => /1 /2 */
+ MESON_VCLK_HDMI_594000_YUV420,
};
struct meson_vclk_params {
+ unsigned int pll_freq;
+ unsigned int phy_freq;
+ unsigned int vclk_freq;
+ unsigned int venc_freq;
unsigned int pixel_freq;
- unsigned int pll_base_freq;
unsigned int pll_od1;
unsigned int pll_od2;
unsigned int pll_od3;
@@ -367,8 +372,11 @@ struct meson_vclk_params {
unsigned int vclk_div;
} params[] = {
[MESON_VCLK_HDMI_ENCI_54000] = {
+ .pll_freq = 4320000,
+ .phy_freq = 270000,
+ .vclk_freq = 54000,
+ .venc_freq = 54000,
.pixel_freq = 54000,
- .pll_base_freq = 4320000,
.pll_od1 = 4,
.pll_od2 = 4,
.pll_od3 = 1,
@@ -376,8 +384,11 @@ struct meson_vclk_params {
.vclk_div = 1,
},
[MESON_VCLK_HDMI_DDR_54000] = {
- .pixel_freq = 54000,
- .pll_base_freq = 4320000,
+ .pll_freq = 4320000,
+ .phy_freq = 270000,
+ .vclk_freq = 54000,
+ .venc_freq = 54000,
+ .pixel_freq = 27000,
.pll_od1 = 4,
.pll_od2 = 4,
.pll_od3 = 1,
@@ -385,8 +396,11 @@ struct meson_vclk_params {
.vclk_div = 1,
},
[MESON_VCLK_HDMI_DDR_148500] = {
- .pixel_freq = 148500,
- .pll_base_freq = 2970000,
+ .pll_freq = 2970000,
+ .phy_freq = 742500,
+ .vclk_freq = 148500,
+ .venc_freq = 148500,
+ .pixel_freq = 74250,
.pll_od1 = 4,
.pll_od2 = 1,
.pll_od3 = 1,
@@ -394,8 +408,11 @@ struct meson_vclk_params {
.vclk_div = 1,
},
[MESON_VCLK_HDMI_74250] = {
+ .pll_freq = 2970000,
+ .phy_freq = 742500,
+ .vclk_freq = 74250,
+ .venc_freq = 74250,
.pixel_freq = 74250,
- .pll_base_freq = 2970000,
.pll_od1 = 2,
.pll_od2 = 2,
.pll_od3 = 2,
@@ -403,8 +420,11 @@ struct meson_vclk_params {
.vclk_div = 1,
},
[MESON_VCLK_HDMI_148500] = {
+ .pll_freq = 2970000,
+ .phy_freq = 1485000,
+ .vclk_freq = 148500,
+ .venc_freq = 148500,
.pixel_freq = 148500,
- .pll_base_freq = 2970000,
.pll_od1 = 1,
.pll_od2 = 2,
.pll_od3 = 2,
@@ -412,8 +432,11 @@ struct meson_vclk_params {
.vclk_div = 1,
},
[MESON_VCLK_HDMI_297000] = {
+ .pll_freq = 5940000,
+ .phy_freq = 2970000,
+ .venc_freq = 297000,
+ .vclk_freq = 297000,
.pixel_freq = 297000,
- .pll_base_freq = 5940000,
.pll_od1 = 2,
.pll_od2 = 1,
.pll_od3 = 1,
@@ -421,14 +444,29 @@ struct meson_vclk_params {
.vclk_div = 2,
},
[MESON_VCLK_HDMI_594000] = {
+ .pll_freq = 5940000,
+ .phy_freq = 5940000,
+ .venc_freq = 594000,
+ .vclk_freq = 594000,
.pixel_freq = 594000,
- .pll_base_freq = 5940000,
.pll_od1 = 1,
.pll_od2 = 1,
.pll_od3 = 2,
.vid_pll_div = VID_PLL_DIV_5,
.vclk_div = 1,
},
+ [MESON_VCLK_HDMI_594000_YUV420] = {
+ .pll_freq = 5940000,
+ .phy_freq = 2970000,
+ .venc_freq = 594000,
+ .vclk_freq = 594000,
+ .pixel_freq = 297000,
+ .pll_od1 = 2,
+ .pll_od2 = 1,
+ .pll_od3 = 1,
+ .vid_pll_div = VID_PLL_DIV_5,
+ .vclk_div = 1,
+ },
{ /* sentinel */ },
};
@@ -701,6 +739,7 @@ static void meson_hdmi_pll_generic_set(struct meson_drm *priv,
unsigned int od, m, frac, od1, od2, od3;
if (meson_hdmi_pll_find_params(priv, pll_freq, &m, &frac, &od)) {
+ /* OD2 goes to the PHY, and needs to be *10, so keep OD3=1 */
od3 = 1;
if (od < 4) {
od1 = 2;
@@ -723,21 +762,28 @@ static void meson_hdmi_pll_generic_set(struct meson_drm *priv,
}
enum drm_mode_status
-meson_vclk_vic_supported_freq(unsigned int freq)
+meson_vclk_vic_supported_freq(unsigned int phy_freq,
+ unsigned int vclk_freq)
{
int i;
- DRM_DEBUG_DRIVER("freq = %d\n", freq);
+ DRM_DEBUG_DRIVER("phy_freq = %d vclk_freq = %d\n",
+ phy_freq, vclk_freq);
for (i = 0 ; params[i].pixel_freq ; ++i) {
DRM_DEBUG_DRIVER("i = %d pixel_freq = %d alt = %d\n",
i, params[i].pixel_freq,
FREQ_1000_1001(params[i].pixel_freq));
+ DRM_DEBUG_DRIVER("i = %d phy_freq = %d alt = %d\n",
+ i, params[i].phy_freq,
+ FREQ_1000_1001(params[i].phy_freq/10)*10);
/* Match strict frequency */
- if (freq == params[i].pixel_freq)
+ if (phy_freq == params[i].phy_freq &&
+ vclk_freq == params[i].vclk_freq)
return MODE_OK;
/* Match 1000/1001 variant */
- if (freq == FREQ_1000_1001(params[i].pixel_freq))
+ if (phy_freq == (FREQ_1000_1001(params[i].phy_freq/10)*10) &&
+ vclk_freq == FREQ_1000_1001(params[i].vclk_freq))
return MODE_OK;
}
@@ -965,8 +1011,9 @@ static void meson_vclk_set(struct meson_drm *priv, unsigned int pll_base_freq,
}
void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
- unsigned int vclk_freq, unsigned int venc_freq,
- unsigned int dac_freq, bool hdmi_use_enci)
+ unsigned int phy_freq, unsigned int vclk_freq,
+ unsigned int venc_freq, unsigned int dac_freq,
+ bool hdmi_use_enci)
{
bool vic_alternate_clock = false;
unsigned int freq;
@@ -986,7 +1033,7 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
* - venc_div = 1
* - encp encoder
*/
- meson_vclk_set(priv, vclk_freq * 10, 0, 0, 0,
+ meson_vclk_set(priv, phy_freq, 0, 0, 0,
VID_PLL_DIV_5, 2, 1, 1, false, false);
return;
}
@@ -1008,9 +1055,11 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
}
for (freq = 0 ; params[freq].pixel_freq ; ++freq) {
- if (vclk_freq == params[freq].pixel_freq ||
- vclk_freq == FREQ_1000_1001(params[freq].pixel_freq)) {
- if (vclk_freq != params[freq].pixel_freq)
+ if ((phy_freq == params[freq].phy_freq ||
+ phy_freq == FREQ_1000_1001(params[freq].phy_freq/10)*10) &&
+ (vclk_freq == params[freq].vclk_freq ||
+ vclk_freq == FREQ_1000_1001(params[freq].vclk_freq))) {
+ if (vclk_freq != params[freq].vclk_freq)
vic_alternate_clock = true;
else
vic_alternate_clock = false;
@@ -1039,7 +1088,7 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
return;
}
- meson_vclk_set(priv, params[freq].pll_base_freq,
+ meson_vclk_set(priv, params[freq].pll_freq,
params[freq].pll_od1, params[freq].pll_od2,
params[freq].pll_od3, params[freq].vid_pll_div,
params[freq].vclk_div, hdmi_tx_div, venc_div,
diff --git a/drivers/gpu/drm/meson/meson_vclk.h b/drivers/gpu/drm/meson/meson_vclk.h
index b62125540aef..aed0ab2efa71 100644
--- a/drivers/gpu/drm/meson/meson_vclk.h
+++ b/drivers/gpu/drm/meson/meson_vclk.h
@@ -25,10 +25,11 @@ enum {
enum drm_mode_status
meson_vclk_dmt_supported_freq(struct meson_drm *priv, unsigned int freq);
enum drm_mode_status
-meson_vclk_vic_supported_freq(unsigned int freq);
+meson_vclk_vic_supported_freq(unsigned int phy_freq, unsigned int vclk_freq);
void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
- unsigned int vclk_freq, unsigned int venc_freq,
- unsigned int dac_freq, bool hdmi_use_enci);
+ unsigned int phy_freq, unsigned int vclk_freq,
+ unsigned int venc_freq, unsigned int dac_freq,
+ bool hdmi_use_enci);
#endif /* __MESON_VCLK_H */
diff --git a/drivers/gpu/drm/meson/meson_venc_cvbs.c b/drivers/gpu/drm/meson/meson_venc_cvbs.c
index 9ab27aecfcf3..bd95b8e95626 100644
--- a/drivers/gpu/drm/meson/meson_venc_cvbs.c
+++ b/drivers/gpu/drm/meson/meson_venc_cvbs.c
@@ -206,7 +206,8 @@ static void meson_venc_cvbs_encoder_mode_set(struct drm_encoder *encoder,
/* Setup 27MHz vclk2 for ENCI and VDAC */
meson_vclk_setup(priv, MESON_VCLK_TARGET_CVBS,
MESON_VCLK_CVBS, MESON_VCLK_CVBS,
- MESON_VCLK_CVBS, true);
+ MESON_VCLK_CVBS, MESON_VCLK_CVBS,
+ true);
break;
}
}
--
2.22.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 09/10] drm/meson: vclk: add support for YUV420 setup
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
This patch adds clocking support for the YUV420 output from the
Amlogic Meson SoCs Video Processing Unit to the HDMI Controller.
The YUV420 is obtained by generating a YUV444 pixel stream like
the classic HDMI display modes, but then the Video Encoder output
can be configured to down-sample the YUV444 pixel stream to a YUV420
stream.
This mode needs a different clock generation scheme since the TMDS PHY
clock must match the 10x ratio with the YUV420 pixel clock, but
the video encoder must run at 2x the pixel clock.
This patch adds the TMDS PHY clock value in all the video clock setup
in order to better support these specific uses cases and switch
to the Common Clock framework for clocks handling in the future.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 24 ++++---
drivers/gpu/drm/meson/meson_vclk.c | 93 +++++++++++++++++++------
drivers/gpu/drm/meson/meson_vclk.h | 7 +-
drivers/gpu/drm/meson/meson_venc_cvbs.c | 3 +-
4 files changed, 93 insertions(+), 34 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 75c133a048d3..ce27dfde509e 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -376,15 +376,19 @@ static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
{
struct meson_drm *priv = dw_hdmi->priv;
int vic = drm_match_cea_mode(mode);
+ unsigned int phy_freq;
unsigned int vclk_freq;
unsigned int venc_freq;
unsigned int hdmi_freq;
vclk_freq = mode->clock;
+ /* TMDS clock is pixel_clock * 10 */
+ phy_freq = vclk_freq * 10;
+
if (!vic) {
- meson_vclk_setup(priv, MESON_VCLK_TARGET_DMT, vclk_freq,
- vclk_freq, vclk_freq, false);
+ meson_vclk_setup(priv, MESON_VCLK_TARGET_DMT, phy_freq,
+ vclk_freq, vclk_freq, vclk_freq, false);
return;
}
@@ -402,11 +406,11 @@ static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
venc_freq /= 2;
- DRM_DEBUG_DRIVER("vclk:%d venc=%d hdmi=%d enci=%d\n",
- vclk_freq, venc_freq, hdmi_freq,
+ DRM_DEBUG_DRIVER("vclk:%d phy=%d venc=%d hdmi=%d enci=%d\n",
+ phy_freq, vclk_freq, venc_freq, hdmi_freq,
priv->venc.hdmi_use_enci);
- meson_vclk_setup(priv, MESON_VCLK_TARGET_HDMI, vclk_freq,
+ meson_vclk_setup(priv, MESON_VCLK_TARGET_HDMI, phy_freq, vclk_freq,
venc_freq, hdmi_freq, priv->venc.hdmi_use_enci);
}
@@ -617,6 +621,7 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
const struct drm_display_mode *mode)
{
struct meson_drm *priv = connector->dev->dev_private;
+ unsigned int phy_freq;
unsigned int vclk_freq;
unsigned int venc_freq;
unsigned int hdmi_freq;
@@ -643,6 +648,9 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
vclk_freq = mode->clock;
+ /* TMDS clock is pixel_clock * 10 */
+ phy_freq = vclk_freq * 10;
+
/* 480i/576i needs global pixel doubling */
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
vclk_freq *= 2;
@@ -659,10 +667,10 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
venc_freq /= 2;
- dev_dbg(connector->dev->dev, "%s: vclk:%d venc=%d hdmi=%d\n", __func__,
- vclk_freq, venc_freq, hdmi_freq);
+ dev_dbg(connector->dev->dev, "%s: vclk:%d phy=%d venc=%d hdmi=%d\n",
+ __func__, phy_freq, vclk_freq, venc_freq, hdmi_freq);
- return meson_vclk_vic_supported_freq(vclk_freq);
+ return meson_vclk_vic_supported_freq(phy_freq, vclk_freq);
}
/* Encoder */
diff --git a/drivers/gpu/drm/meson/meson_vclk.c b/drivers/gpu/drm/meson/meson_vclk.c
index f690793ae2d5..fdf26dac9fa8 100644
--- a/drivers/gpu/drm/meson/meson_vclk.c
+++ b/drivers/gpu/drm/meson/meson_vclk.c
@@ -354,12 +354,17 @@ enum {
/* 2970 /1 /1 /1 /5 /2 => /1 /1 */
MESON_VCLK_HDMI_297000,
/* 5940 /1 /1 /2 /5 /1 => /1 /1 */
- MESON_VCLK_HDMI_594000
+ MESON_VCLK_HDMI_594000,
+/* 2970 /1 /1 /1 /5 /1 => /1 /2 */
+ MESON_VCLK_HDMI_594000_YUV420,
};
struct meson_vclk_params {
+ unsigned int pll_freq;
+ unsigned int phy_freq;
+ unsigned int vclk_freq;
+ unsigned int venc_freq;
unsigned int pixel_freq;
- unsigned int pll_base_freq;
unsigned int pll_od1;
unsigned int pll_od2;
unsigned int pll_od3;
@@ -367,8 +372,11 @@ struct meson_vclk_params {
unsigned int vclk_div;
} params[] = {
[MESON_VCLK_HDMI_ENCI_54000] = {
+ .pll_freq = 4320000,
+ .phy_freq = 270000,
+ .vclk_freq = 54000,
+ .venc_freq = 54000,
.pixel_freq = 54000,
- .pll_base_freq = 4320000,
.pll_od1 = 4,
.pll_od2 = 4,
.pll_od3 = 1,
@@ -376,8 +384,11 @@ struct meson_vclk_params {
.vclk_div = 1,
},
[MESON_VCLK_HDMI_DDR_54000] = {
- .pixel_freq = 54000,
- .pll_base_freq = 4320000,
+ .pll_freq = 4320000,
+ .phy_freq = 270000,
+ .vclk_freq = 54000,
+ .venc_freq = 54000,
+ .pixel_freq = 27000,
.pll_od1 = 4,
.pll_od2 = 4,
.pll_od3 = 1,
@@ -385,8 +396,11 @@ struct meson_vclk_params {
.vclk_div = 1,
},
[MESON_VCLK_HDMI_DDR_148500] = {
- .pixel_freq = 148500,
- .pll_base_freq = 2970000,
+ .pll_freq = 2970000,
+ .phy_freq = 742500,
+ .vclk_freq = 148500,
+ .venc_freq = 148500,
+ .pixel_freq = 74250,
.pll_od1 = 4,
.pll_od2 = 1,
.pll_od3 = 1,
@@ -394,8 +408,11 @@ struct meson_vclk_params {
.vclk_div = 1,
},
[MESON_VCLK_HDMI_74250] = {
+ .pll_freq = 2970000,
+ .phy_freq = 742500,
+ .vclk_freq = 74250,
+ .venc_freq = 74250,
.pixel_freq = 74250,
- .pll_base_freq = 2970000,
.pll_od1 = 2,
.pll_od2 = 2,
.pll_od3 = 2,
@@ -403,8 +420,11 @@ struct meson_vclk_params {
.vclk_div = 1,
},
[MESON_VCLK_HDMI_148500] = {
+ .pll_freq = 2970000,
+ .phy_freq = 1485000,
+ .vclk_freq = 148500,
+ .venc_freq = 148500,
.pixel_freq = 148500,
- .pll_base_freq = 2970000,
.pll_od1 = 1,
.pll_od2 = 2,
.pll_od3 = 2,
@@ -412,8 +432,11 @@ struct meson_vclk_params {
.vclk_div = 1,
},
[MESON_VCLK_HDMI_297000] = {
+ .pll_freq = 5940000,
+ .phy_freq = 2970000,
+ .venc_freq = 297000,
+ .vclk_freq = 297000,
.pixel_freq = 297000,
- .pll_base_freq = 5940000,
.pll_od1 = 2,
.pll_od2 = 1,
.pll_od3 = 1,
@@ -421,14 +444,29 @@ struct meson_vclk_params {
.vclk_div = 2,
},
[MESON_VCLK_HDMI_594000] = {
+ .pll_freq = 5940000,
+ .phy_freq = 5940000,
+ .venc_freq = 594000,
+ .vclk_freq = 594000,
.pixel_freq = 594000,
- .pll_base_freq = 5940000,
.pll_od1 = 1,
.pll_od2 = 1,
.pll_od3 = 2,
.vid_pll_div = VID_PLL_DIV_5,
.vclk_div = 1,
},
+ [MESON_VCLK_HDMI_594000_YUV420] = {
+ .pll_freq = 5940000,
+ .phy_freq = 2970000,
+ .venc_freq = 594000,
+ .vclk_freq = 594000,
+ .pixel_freq = 297000,
+ .pll_od1 = 2,
+ .pll_od2 = 1,
+ .pll_od3 = 1,
+ .vid_pll_div = VID_PLL_DIV_5,
+ .vclk_div = 1,
+ },
{ /* sentinel */ },
};
@@ -701,6 +739,7 @@ static void meson_hdmi_pll_generic_set(struct meson_drm *priv,
unsigned int od, m, frac, od1, od2, od3;
if (meson_hdmi_pll_find_params(priv, pll_freq, &m, &frac, &od)) {
+ /* OD2 goes to the PHY, and needs to be *10, so keep OD3=1 */
od3 = 1;
if (od < 4) {
od1 = 2;
@@ -723,21 +762,28 @@ static void meson_hdmi_pll_generic_set(struct meson_drm *priv,
}
enum drm_mode_status
-meson_vclk_vic_supported_freq(unsigned int freq)
+meson_vclk_vic_supported_freq(unsigned int phy_freq,
+ unsigned int vclk_freq)
{
int i;
- DRM_DEBUG_DRIVER("freq = %d\n", freq);
+ DRM_DEBUG_DRIVER("phy_freq = %d vclk_freq = %d\n",
+ phy_freq, vclk_freq);
for (i = 0 ; params[i].pixel_freq ; ++i) {
DRM_DEBUG_DRIVER("i = %d pixel_freq = %d alt = %d\n",
i, params[i].pixel_freq,
FREQ_1000_1001(params[i].pixel_freq));
+ DRM_DEBUG_DRIVER("i = %d phy_freq = %d alt = %d\n",
+ i, params[i].phy_freq,
+ FREQ_1000_1001(params[i].phy_freq/10)*10);
/* Match strict frequency */
- if (freq == params[i].pixel_freq)
+ if (phy_freq == params[i].phy_freq &&
+ vclk_freq == params[i].vclk_freq)
return MODE_OK;
/* Match 1000/1001 variant */
- if (freq == FREQ_1000_1001(params[i].pixel_freq))
+ if (phy_freq == (FREQ_1000_1001(params[i].phy_freq/10)*10) &&
+ vclk_freq == FREQ_1000_1001(params[i].vclk_freq))
return MODE_OK;
}
@@ -965,8 +1011,9 @@ static void meson_vclk_set(struct meson_drm *priv, unsigned int pll_base_freq,
}
void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
- unsigned int vclk_freq, unsigned int venc_freq,
- unsigned int dac_freq, bool hdmi_use_enci)
+ unsigned int phy_freq, unsigned int vclk_freq,
+ unsigned int venc_freq, unsigned int dac_freq,
+ bool hdmi_use_enci)
{
bool vic_alternate_clock = false;
unsigned int freq;
@@ -986,7 +1033,7 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
* - venc_div = 1
* - encp encoder
*/
- meson_vclk_set(priv, vclk_freq * 10, 0, 0, 0,
+ meson_vclk_set(priv, phy_freq, 0, 0, 0,
VID_PLL_DIV_5, 2, 1, 1, false, false);
return;
}
@@ -1008,9 +1055,11 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
}
for (freq = 0 ; params[freq].pixel_freq ; ++freq) {
- if (vclk_freq == params[freq].pixel_freq ||
- vclk_freq == FREQ_1000_1001(params[freq].pixel_freq)) {
- if (vclk_freq != params[freq].pixel_freq)
+ if ((phy_freq == params[freq].phy_freq ||
+ phy_freq == FREQ_1000_1001(params[freq].phy_freq/10)*10) &&
+ (vclk_freq == params[freq].vclk_freq ||
+ vclk_freq == FREQ_1000_1001(params[freq].vclk_freq))) {
+ if (vclk_freq != params[freq].vclk_freq)
vic_alternate_clock = true;
else
vic_alternate_clock = false;
@@ -1039,7 +1088,7 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
return;
}
- meson_vclk_set(priv, params[freq].pll_base_freq,
+ meson_vclk_set(priv, params[freq].pll_freq,
params[freq].pll_od1, params[freq].pll_od2,
params[freq].pll_od3, params[freq].vid_pll_div,
params[freq].vclk_div, hdmi_tx_div, venc_div,
diff --git a/drivers/gpu/drm/meson/meson_vclk.h b/drivers/gpu/drm/meson/meson_vclk.h
index b62125540aef..aed0ab2efa71 100644
--- a/drivers/gpu/drm/meson/meson_vclk.h
+++ b/drivers/gpu/drm/meson/meson_vclk.h
@@ -25,10 +25,11 @@ enum {
enum drm_mode_status
meson_vclk_dmt_supported_freq(struct meson_drm *priv, unsigned int freq);
enum drm_mode_status
-meson_vclk_vic_supported_freq(unsigned int freq);
+meson_vclk_vic_supported_freq(unsigned int phy_freq, unsigned int vclk_freq);
void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
- unsigned int vclk_freq, unsigned int venc_freq,
- unsigned int dac_freq, bool hdmi_use_enci);
+ unsigned int phy_freq, unsigned int vclk_freq,
+ unsigned int venc_freq, unsigned int dac_freq,
+ bool hdmi_use_enci);
#endif /* __MESON_VCLK_H */
diff --git a/drivers/gpu/drm/meson/meson_venc_cvbs.c b/drivers/gpu/drm/meson/meson_venc_cvbs.c
index 9ab27aecfcf3..bd95b8e95626 100644
--- a/drivers/gpu/drm/meson/meson_venc_cvbs.c
+++ b/drivers/gpu/drm/meson/meson_venc_cvbs.c
@@ -206,7 +206,8 @@ static void meson_venc_cvbs_encoder_mode_set(struct drm_encoder *encoder,
/* Setup 27MHz vclk2 for ENCI and VDAC */
meson_vclk_setup(priv, MESON_VCLK_TARGET_CVBS,
MESON_VCLK_CVBS, MESON_VCLK_CVBS,
- MESON_VCLK_CVBS, true);
+ MESON_VCLK_CVBS, MESON_VCLK_CVBS,
+ true);
break;
}
}
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 10/10] drm/meson: Add YUV420 output support
2019-12-18 15:46 ` Neil Armstrong
(?)
@ 2019-12-18 15:46 ` Neil Armstrong
-1 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: Neil Armstrong, linux-amlogic, dri-devel, linux-kernel
This patch adds support for the YUV420 output from the Amlogic Meson SoCs
Video Processing Unit to the HDMI Controller.
The YUV420 is obtained by generating a YUV444 pixel stream like
the classic HDMI display modes, but then the Video Encoder output
can be configured to down-sample the YUV444 pixel stream to a YUV420
stream.
In addition if pixel stream down-sampling, the Y Cb Cr components must
also be mapped differently to align with the HDMI2.0 specifications.
This mode needs a different clock generation scheme since the TMDS PHY
clock must match the 10x ration with the YUV420 pixel clock, but
the video encoder must run at 2x the pixel clock.
This patch enables the bridge bus format negotiation, and handles
the YUV420 case if selected by the negotiation.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 91 ++++++++++++++++++++-------
1 file changed, 70 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index ce27dfde509e..90ec4553ed51 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -150,6 +150,7 @@ struct meson_dw_hdmi {
struct regulator *hdmi_supply;
u32 irq_stat;
struct dw_hdmi *hdmi;
+ unsigned long output_bus_fmt;
};
#define encoder_to_meson_dw_hdmi(x) \
container_of(x, struct meson_dw_hdmi, encoder)
@@ -301,6 +302,10 @@ static void meson_hdmi_phy_setup_mode(struct meson_dw_hdmi *dw_hdmi,
struct meson_drm *priv = dw_hdmi->priv;
unsigned int pixel_clock = mode->clock;
+ /* For 420, pixel clock is half unlike venc clock */
+ if (dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+ pixel_clock /= 2;
+
if (dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxm-dw-hdmi")) {
if (pixel_clock >= 371250) {
@@ -383,6 +388,10 @@ static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
vclk_freq = mode->clock;
+ /* For 420, pixel clock is half unlike venc clock */
+ if (dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+ vclk_freq /= 2;
+
/* TMDS clock is pixel_clock * 10 */
phy_freq = vclk_freq * 10;
@@ -392,13 +401,16 @@ static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
return;
}
+ /* 480i/576i needs global pixel doubling */
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
vclk_freq *= 2;
venc_freq = vclk_freq;
hdmi_freq = vclk_freq;
- if (meson_venc_hdmi_venc_repeat(vic))
+ /* VENC double pixels for 1080i, 720p and YUV420 modes */
+ if (meson_venc_hdmi_venc_repeat(vic) ||
+ dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
venc_freq *= 2;
vclk_freq = max(venc_freq, hdmi_freq);
@@ -445,8 +457,9 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
/* Enable normal output to PHY */
dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12));
- /* TMDS pattern setup (TOFIX Handle the YUV420 case) */
- if (mode->clock > 340000) {
+ /* TMDS pattern setup */
+ if (mode->clock > 340000 &&
+ dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_YUV8_1X24) {
dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01,
0);
dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23,
@@ -621,6 +634,7 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
const struct drm_display_mode *mode)
{
struct meson_drm *priv = connector->dev->dev_private;
+ bool is_hdmi2_sink = connector->display_info.hdmi.scdc.supported;
unsigned int phy_freq;
unsigned int vclk_freq;
unsigned int venc_freq;
@@ -630,9 +644,11 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
DRM_DEBUG_DRIVER("Modeline " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
- /* If sink max TMDS clock, we reject the mode */
+ /* If sink does not support 540MHz, reject the non-420 HDMI2 modes */
if (connector->display_info.max_tmds_clock &&
- mode->clock > connector->display_info.max_tmds_clock)
+ mode->clock > connector->display_info.max_tmds_clock &&
+ !drm_mode_is_420_only(&connector->display_info, mode) &&
+ !drm_mode_is_420_also(&connector->display_info, mode))
return MODE_BAD;
/* Check against non-VIC supported modes */
@@ -648,6 +664,12 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
vclk_freq = mode->clock;
+ /* For 420, pixel clock is half unlike venc clock */
+ if (drm_mode_is_420_only(&connector->display_info, mode) ||
+ (!is_hdmi2_sink &&
+ drm_mode_is_420_also(&connector->display_info, mode)))
+ vclk_freq /= 2;
+
/* TMDS clock is pixel_clock * 10 */
phy_freq = vclk_freq * 10;
@@ -658,8 +680,11 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
venc_freq = vclk_freq;
hdmi_freq = vclk_freq;
- /* VENC double pixels for 1080i and 720p modes */
- if (meson_venc_hdmi_venc_repeat(vic))
+ /* VENC double pixels for 1080i, 720p and YUV420 modes */
+ if (meson_venc_hdmi_venc_repeat(vic) ||
+ drm_mode_is_420_only(&connector->display_info, mode) ||
+ (!is_hdmi2_sink &&
+ drm_mode_is_420_also(&connector->display_info, mode)))
venc_freq *= 2;
vclk_freq = max(venc_freq, hdmi_freq);
@@ -677,6 +702,7 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
static const u32 meson_dw_hdmi_out_bus_fmts[] = {
MEDIA_BUS_FMT_YUV8_1X24,
+ MEDIA_BUS_FMT_UYYVYY8_0_5X24,
};
static void meson_venc_hdmi_encoder_destroy(struct drm_encoder *encoder)
@@ -717,18 +743,23 @@ meson_venc_hdmi_encoder_get_inp_bus_fmts(struct drm_bridge *bridge,
unsigned int *num_input_fmts)
{
u32 *input_fmts = NULL;
+ int i;
- if (output_fmt == meson_dw_hdmi_out_bus_fmts[0]) {
- *num_input_fmts = 1;
- input_fmts = kcalloc(*num_input_fmts,
- sizeof(*input_fmts),
- GFP_KERNEL);
- if (!input_fmts)
- return NULL;
+ *num_input_fmts = 0;
- input_fmts[0] = output_fmt;
- } else {
- *num_input_fmts = 0;
+ for (i = 0 ; i < ARRAY_SIZE(meson_dw_hdmi_out_bus_fmts) ; ++i) {
+ if (output_fmt == meson_dw_hdmi_out_bus_fmts[i]) {
+ *num_input_fmts = 1;
+ input_fmts = kcalloc(*num_input_fmts,
+ sizeof(*input_fmts),
+ GFP_KERNEL);
+ if (!input_fmts)
+ return NULL;
+
+ input_fmts[0] = output_fmt;
+
+ break;
+ }
}
return input_fmts;
@@ -739,6 +770,12 @@ static int meson_venc_hdmi_encoder_atomic_check(struct drm_bridge *bridge,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
+ struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
+
+ dw_hdmi->output_bus_fmt = bridge_state->output_bus_cfg.fmt;
+
+ DRM_DEBUG_DRIVER("output_bus_fmt %lx\n", dw_hdmi->output_bus_fmt);
+
return 0;
}
@@ -776,18 +813,29 @@ static void meson_venc_hdmi_encoder_mode_set(struct drm_bridge *bridge,
struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
struct meson_drm *priv = dw_hdmi->priv;
int vic = drm_match_cea_mode(mode);
+ unsigned int ycrcb_map = VPU_HDMI_OUTPUT_CBYCR;
+ bool yuv420_mode = false;
DRM_DEBUG_DRIVER("\"%s\" vic %d\n", mode->name, vic);
+ if (dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24) {
+ ycrcb_map = VPU_HDMI_OUTPUT_CRYCB;
+ yuv420_mode = true;
+ }
+
/* VENC + VENC-DVI Mode setup */
- meson_venc_hdmi_mode_set(priv, vic, ycrcb_map, false,
- VPU_HDMI_OUTPUT_CBYCR);
+ meson_venc_hdmi_mode_set(priv, vic, ycrcb_map, yuv420_mode, mode);
/* VCLK Set clock */
dw_hdmi_set_vclk(dw_hdmi, mode);
- /* Setup YUV444 to HDMI-TX, no 10bit diphering */
- writel_relaxed(0, priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
+ if (dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+ /* Setup YUV420 to HDMI-TX, no 10bit diphering */
+ writel_relaxed(2 | (2 << 2),
+ priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
+ else
+ /* Setup YUV444 to HDMI-TX, no 10bit diphering */
+ writel_relaxed(0, priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
}
static const struct drm_bridge_funcs meson_venc_hdmi_encoder_bridge_funcs = {
@@ -1042,6 +1090,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
dw_plat_data->phy_name = "meson_dw_hdmi_phy";
dw_plat_data->phy_data = meson_dw_hdmi;
dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709;
+ dw_plat_data->ycbcr_420_allowed = true;
if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
--
2.22.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 10/10] drm/meson: Add YUV420 output support
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
This patch adds support for the YUV420 output from the Amlogic Meson SoCs
Video Processing Unit to the HDMI Controller.
The YUV420 is obtained by generating a YUV444 pixel stream like
the classic HDMI display modes, but then the Video Encoder output
can be configured to down-sample the YUV444 pixel stream to a YUV420
stream.
In addition if pixel stream down-sampling, the Y Cb Cr components must
also be mapped differently to align with the HDMI2.0 specifications.
This mode needs a different clock generation scheme since the TMDS PHY
clock must match the 10x ration with the YUV420 pixel clock, but
the video encoder must run at 2x the pixel clock.
This patch enables the bridge bus format negotiation, and handles
the YUV420 case if selected by the negotiation.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 91 ++++++++++++++++++++-------
1 file changed, 70 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index ce27dfde509e..90ec4553ed51 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -150,6 +150,7 @@ struct meson_dw_hdmi {
struct regulator *hdmi_supply;
u32 irq_stat;
struct dw_hdmi *hdmi;
+ unsigned long output_bus_fmt;
};
#define encoder_to_meson_dw_hdmi(x) \
container_of(x, struct meson_dw_hdmi, encoder)
@@ -301,6 +302,10 @@ static void meson_hdmi_phy_setup_mode(struct meson_dw_hdmi *dw_hdmi,
struct meson_drm *priv = dw_hdmi->priv;
unsigned int pixel_clock = mode->clock;
+ /* For 420, pixel clock is half unlike venc clock */
+ if (dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+ pixel_clock /= 2;
+
if (dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxm-dw-hdmi")) {
if (pixel_clock >= 371250) {
@@ -383,6 +388,10 @@ static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
vclk_freq = mode->clock;
+ /* For 420, pixel clock is half unlike venc clock */
+ if (dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+ vclk_freq /= 2;
+
/* TMDS clock is pixel_clock * 10 */
phy_freq = vclk_freq * 10;
@@ -392,13 +401,16 @@ static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
return;
}
+ /* 480i/576i needs global pixel doubling */
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
vclk_freq *= 2;
venc_freq = vclk_freq;
hdmi_freq = vclk_freq;
- if (meson_venc_hdmi_venc_repeat(vic))
+ /* VENC double pixels for 1080i, 720p and YUV420 modes */
+ if (meson_venc_hdmi_venc_repeat(vic) ||
+ dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
venc_freq *= 2;
vclk_freq = max(venc_freq, hdmi_freq);
@@ -445,8 +457,9 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
/* Enable normal output to PHY */
dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12));
- /* TMDS pattern setup (TOFIX Handle the YUV420 case) */
- if (mode->clock > 340000) {
+ /* TMDS pattern setup */
+ if (mode->clock > 340000 &&
+ dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_YUV8_1X24) {
dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01,
0);
dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23,
@@ -621,6 +634,7 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
const struct drm_display_mode *mode)
{
struct meson_drm *priv = connector->dev->dev_private;
+ bool is_hdmi2_sink = connector->display_info.hdmi.scdc.supported;
unsigned int phy_freq;
unsigned int vclk_freq;
unsigned int venc_freq;
@@ -630,9 +644,11 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
DRM_DEBUG_DRIVER("Modeline " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
- /* If sink max TMDS clock, we reject the mode */
+ /* If sink does not support 540MHz, reject the non-420 HDMI2 modes */
if (connector->display_info.max_tmds_clock &&
- mode->clock > connector->display_info.max_tmds_clock)
+ mode->clock > connector->display_info.max_tmds_clock &&
+ !drm_mode_is_420_only(&connector->display_info, mode) &&
+ !drm_mode_is_420_also(&connector->display_info, mode))
return MODE_BAD;
/* Check against non-VIC supported modes */
@@ -648,6 +664,12 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
vclk_freq = mode->clock;
+ /* For 420, pixel clock is half unlike venc clock */
+ if (drm_mode_is_420_only(&connector->display_info, mode) ||
+ (!is_hdmi2_sink &&
+ drm_mode_is_420_also(&connector->display_info, mode)))
+ vclk_freq /= 2;
+
/* TMDS clock is pixel_clock * 10 */
phy_freq = vclk_freq * 10;
@@ -658,8 +680,11 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
venc_freq = vclk_freq;
hdmi_freq = vclk_freq;
- /* VENC double pixels for 1080i and 720p modes */
- if (meson_venc_hdmi_venc_repeat(vic))
+ /* VENC double pixels for 1080i, 720p and YUV420 modes */
+ if (meson_venc_hdmi_venc_repeat(vic) ||
+ drm_mode_is_420_only(&connector->display_info, mode) ||
+ (!is_hdmi2_sink &&
+ drm_mode_is_420_also(&connector->display_info, mode)))
venc_freq *= 2;
vclk_freq = max(venc_freq, hdmi_freq);
@@ -677,6 +702,7 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
static const u32 meson_dw_hdmi_out_bus_fmts[] = {
MEDIA_BUS_FMT_YUV8_1X24,
+ MEDIA_BUS_FMT_UYYVYY8_0_5X24,
};
static void meson_venc_hdmi_encoder_destroy(struct drm_encoder *encoder)
@@ -717,18 +743,23 @@ meson_venc_hdmi_encoder_get_inp_bus_fmts(struct drm_bridge *bridge,
unsigned int *num_input_fmts)
{
u32 *input_fmts = NULL;
+ int i;
- if (output_fmt == meson_dw_hdmi_out_bus_fmts[0]) {
- *num_input_fmts = 1;
- input_fmts = kcalloc(*num_input_fmts,
- sizeof(*input_fmts),
- GFP_KERNEL);
- if (!input_fmts)
- return NULL;
+ *num_input_fmts = 0;
- input_fmts[0] = output_fmt;
- } else {
- *num_input_fmts = 0;
+ for (i = 0 ; i < ARRAY_SIZE(meson_dw_hdmi_out_bus_fmts) ; ++i) {
+ if (output_fmt == meson_dw_hdmi_out_bus_fmts[i]) {
+ *num_input_fmts = 1;
+ input_fmts = kcalloc(*num_input_fmts,
+ sizeof(*input_fmts),
+ GFP_KERNEL);
+ if (!input_fmts)
+ return NULL;
+
+ input_fmts[0] = output_fmt;
+
+ break;
+ }
}
return input_fmts;
@@ -739,6 +770,12 @@ static int meson_venc_hdmi_encoder_atomic_check(struct drm_bridge *bridge,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
+ struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
+
+ dw_hdmi->output_bus_fmt = bridge_state->output_bus_cfg.fmt;
+
+ DRM_DEBUG_DRIVER("output_bus_fmt %lx\n", dw_hdmi->output_bus_fmt);
+
return 0;
}
@@ -776,18 +813,29 @@ static void meson_venc_hdmi_encoder_mode_set(struct drm_bridge *bridge,
struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
struct meson_drm *priv = dw_hdmi->priv;
int vic = drm_match_cea_mode(mode);
+ unsigned int ycrcb_map = VPU_HDMI_OUTPUT_CBYCR;
+ bool yuv420_mode = false;
DRM_DEBUG_DRIVER("\"%s\" vic %d\n", mode->name, vic);
+ if (dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24) {
+ ycrcb_map = VPU_HDMI_OUTPUT_CRYCB;
+ yuv420_mode = true;
+ }
+
/* VENC + VENC-DVI Mode setup */
- meson_venc_hdmi_mode_set(priv, vic, ycrcb_map, false,
- VPU_HDMI_OUTPUT_CBYCR);
+ meson_venc_hdmi_mode_set(priv, vic, ycrcb_map, yuv420_mode, mode);
/* VCLK Set clock */
dw_hdmi_set_vclk(dw_hdmi, mode);
- /* Setup YUV444 to HDMI-TX, no 10bit diphering */
- writel_relaxed(0, priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
+ if (dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+ /* Setup YUV420 to HDMI-TX, no 10bit diphering */
+ writel_relaxed(2 | (2 << 2),
+ priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
+ else
+ /* Setup YUV444 to HDMI-TX, no 10bit diphering */
+ writel_relaxed(0, priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
}
static const struct drm_bridge_funcs meson_venc_hdmi_encoder_bridge_funcs = {
@@ -1042,6 +1090,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
dw_plat_data->phy_name = "meson_dw_hdmi_phy";
dw_plat_data->phy_data = meson_dw_hdmi;
dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709;
+ dw_plat_data->ycbcr_420_allowed = true;
if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
--
2.22.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v3 10/10] drm/meson: Add YUV420 output support
@ 2019-12-18 15:46 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-18 15:46 UTC (permalink / raw)
To: a.hajda, Laurent.pinchart, jonas, jernej.skrabec, boris.brezillon
Cc: linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
This patch adds support for the YUV420 output from the Amlogic Meson SoCs
Video Processing Unit to the HDMI Controller.
The YUV420 is obtained by generating a YUV444 pixel stream like
the classic HDMI display modes, but then the Video Encoder output
can be configured to down-sample the YUV444 pixel stream to a YUV420
stream.
In addition if pixel stream down-sampling, the Y Cb Cr components must
also be mapped differently to align with the HDMI2.0 specifications.
This mode needs a different clock generation scheme since the TMDS PHY
clock must match the 10x ration with the YUV420 pixel clock, but
the video encoder must run at 2x the pixel clock.
This patch enables the bridge bus format negotiation, and handles
the YUV420 case if selected by the negotiation.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 91 ++++++++++++++++++++-------
1 file changed, 70 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index ce27dfde509e..90ec4553ed51 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -150,6 +150,7 @@ struct meson_dw_hdmi {
struct regulator *hdmi_supply;
u32 irq_stat;
struct dw_hdmi *hdmi;
+ unsigned long output_bus_fmt;
};
#define encoder_to_meson_dw_hdmi(x) \
container_of(x, struct meson_dw_hdmi, encoder)
@@ -301,6 +302,10 @@ static void meson_hdmi_phy_setup_mode(struct meson_dw_hdmi *dw_hdmi,
struct meson_drm *priv = dw_hdmi->priv;
unsigned int pixel_clock = mode->clock;
+ /* For 420, pixel clock is half unlike venc clock */
+ if (dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+ pixel_clock /= 2;
+
if (dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxm-dw-hdmi")) {
if (pixel_clock >= 371250) {
@@ -383,6 +388,10 @@ static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
vclk_freq = mode->clock;
+ /* For 420, pixel clock is half unlike venc clock */
+ if (dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+ vclk_freq /= 2;
+
/* TMDS clock is pixel_clock * 10 */
phy_freq = vclk_freq * 10;
@@ -392,13 +401,16 @@ static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
return;
}
+ /* 480i/576i needs global pixel doubling */
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
vclk_freq *= 2;
venc_freq = vclk_freq;
hdmi_freq = vclk_freq;
- if (meson_venc_hdmi_venc_repeat(vic))
+ /* VENC double pixels for 1080i, 720p and YUV420 modes */
+ if (meson_venc_hdmi_venc_repeat(vic) ||
+ dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
venc_freq *= 2;
vclk_freq = max(venc_freq, hdmi_freq);
@@ -445,8 +457,9 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
/* Enable normal output to PHY */
dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12));
- /* TMDS pattern setup (TOFIX Handle the YUV420 case) */
- if (mode->clock > 340000) {
+ /* TMDS pattern setup */
+ if (mode->clock > 340000 &&
+ dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_YUV8_1X24) {
dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01,
0);
dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23,
@@ -621,6 +634,7 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
const struct drm_display_mode *mode)
{
struct meson_drm *priv = connector->dev->dev_private;
+ bool is_hdmi2_sink = connector->display_info.hdmi.scdc.supported;
unsigned int phy_freq;
unsigned int vclk_freq;
unsigned int venc_freq;
@@ -630,9 +644,11 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
DRM_DEBUG_DRIVER("Modeline " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
- /* If sink max TMDS clock, we reject the mode */
+ /* If sink does not support 540MHz, reject the non-420 HDMI2 modes */
if (connector->display_info.max_tmds_clock &&
- mode->clock > connector->display_info.max_tmds_clock)
+ mode->clock > connector->display_info.max_tmds_clock &&
+ !drm_mode_is_420_only(&connector->display_info, mode) &&
+ !drm_mode_is_420_also(&connector->display_info, mode))
return MODE_BAD;
/* Check against non-VIC supported modes */
@@ -648,6 +664,12 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
vclk_freq = mode->clock;
+ /* For 420, pixel clock is half unlike venc clock */
+ if (drm_mode_is_420_only(&connector->display_info, mode) ||
+ (!is_hdmi2_sink &&
+ drm_mode_is_420_also(&connector->display_info, mode)))
+ vclk_freq /= 2;
+
/* TMDS clock is pixel_clock * 10 */
phy_freq = vclk_freq * 10;
@@ -658,8 +680,11 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
venc_freq = vclk_freq;
hdmi_freq = vclk_freq;
- /* VENC double pixels for 1080i and 720p modes */
- if (meson_venc_hdmi_venc_repeat(vic))
+ /* VENC double pixels for 1080i, 720p and YUV420 modes */
+ if (meson_venc_hdmi_venc_repeat(vic) ||
+ drm_mode_is_420_only(&connector->display_info, mode) ||
+ (!is_hdmi2_sink &&
+ drm_mode_is_420_also(&connector->display_info, mode)))
venc_freq *= 2;
vclk_freq = max(venc_freq, hdmi_freq);
@@ -677,6 +702,7 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
static const u32 meson_dw_hdmi_out_bus_fmts[] = {
MEDIA_BUS_FMT_YUV8_1X24,
+ MEDIA_BUS_FMT_UYYVYY8_0_5X24,
};
static void meson_venc_hdmi_encoder_destroy(struct drm_encoder *encoder)
@@ -717,18 +743,23 @@ meson_venc_hdmi_encoder_get_inp_bus_fmts(struct drm_bridge *bridge,
unsigned int *num_input_fmts)
{
u32 *input_fmts = NULL;
+ int i;
- if (output_fmt == meson_dw_hdmi_out_bus_fmts[0]) {
- *num_input_fmts = 1;
- input_fmts = kcalloc(*num_input_fmts,
- sizeof(*input_fmts),
- GFP_KERNEL);
- if (!input_fmts)
- return NULL;
+ *num_input_fmts = 0;
- input_fmts[0] = output_fmt;
- } else {
- *num_input_fmts = 0;
+ for (i = 0 ; i < ARRAY_SIZE(meson_dw_hdmi_out_bus_fmts) ; ++i) {
+ if (output_fmt == meson_dw_hdmi_out_bus_fmts[i]) {
+ *num_input_fmts = 1;
+ input_fmts = kcalloc(*num_input_fmts,
+ sizeof(*input_fmts),
+ GFP_KERNEL);
+ if (!input_fmts)
+ return NULL;
+
+ input_fmts[0] = output_fmt;
+
+ break;
+ }
}
return input_fmts;
@@ -739,6 +770,12 @@ static int meson_venc_hdmi_encoder_atomic_check(struct drm_bridge *bridge,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
+ struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
+
+ dw_hdmi->output_bus_fmt = bridge_state->output_bus_cfg.fmt;
+
+ DRM_DEBUG_DRIVER("output_bus_fmt %lx\n", dw_hdmi->output_bus_fmt);
+
return 0;
}
@@ -776,18 +813,29 @@ static void meson_venc_hdmi_encoder_mode_set(struct drm_bridge *bridge,
struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
struct meson_drm *priv = dw_hdmi->priv;
int vic = drm_match_cea_mode(mode);
+ unsigned int ycrcb_map = VPU_HDMI_OUTPUT_CBYCR;
+ bool yuv420_mode = false;
DRM_DEBUG_DRIVER("\"%s\" vic %d\n", mode->name, vic);
+ if (dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24) {
+ ycrcb_map = VPU_HDMI_OUTPUT_CRYCB;
+ yuv420_mode = true;
+ }
+
/* VENC + VENC-DVI Mode setup */
- meson_venc_hdmi_mode_set(priv, vic, ycrcb_map, false,
- VPU_HDMI_OUTPUT_CBYCR);
+ meson_venc_hdmi_mode_set(priv, vic, ycrcb_map, yuv420_mode, mode);
/* VCLK Set clock */
dw_hdmi_set_vclk(dw_hdmi, mode);
- /* Setup YUV444 to HDMI-TX, no 10bit diphering */
- writel_relaxed(0, priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
+ if (dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+ /* Setup YUV420 to HDMI-TX, no 10bit diphering */
+ writel_relaxed(2 | (2 << 2),
+ priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
+ else
+ /* Setup YUV444 to HDMI-TX, no 10bit diphering */
+ writel_relaxed(0, priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
}
static const struct drm_bridge_funcs meson_venc_hdmi_encoder_bridge_funcs = {
@@ -1042,6 +1090,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
dw_plat_data->phy_name = "meson_dw_hdmi_phy";
dw_plat_data->phy_data = meson_dw_hdmi;
dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709;
+ dw_plat_data->ycbcr_420_allowed = true;
if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 39+ messages in thread
* Re: [PATCH v3 02/10] drm/bridge: dw-hdmi: add max bpc connector property
2019-12-18 15:46 ` Neil Armstrong
(?)
@ 2019-12-18 15:49 ` Laurent Pinchart
-1 siblings, 0 replies; 39+ messages in thread
From: Laurent Pinchart @ 2019-12-18 15:49 UTC (permalink / raw)
To: Neil Armstrong
Cc: a.hajda, jonas, jernej.skrabec, boris.brezillon, linux-amlogic,
dri-devel, linux-kernel
Hi Neil and Jonas,
Thank you for the patch.
On Wed, Dec 18, 2019 at 04:46:29PM +0100, Neil Armstrong wrote:
> From: Jonas Karlman <jonas@kwiboo.se>
>
> Add the max_bpc property to the dw-hdmi connector to prepare support
> for 10, 12 & 16bit output support.
>
> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index 6a0b4b3a6739..e7a0600f8cc5 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -2368,6 +2368,10 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
> DRM_MODE_CONNECTOR_HDMIA,
> hdmi->ddc);
>
> + drm_atomic_helper_connector_reset(connector);
> +
> + drm_connector_attach_max_bpc_property(connector, 8, 16);
> +
I'm not asking you to rework this, but have you given any thought on how
we would be able to support this feature in a model where the bridge
wouldn't create a connector anymore (as done in the latest version of
the omapdrm series) ?
> if (hdmi->version >= 0x200a && hdmi->plat_data->use_drm_infoframe)
> drm_object_attach_property(&connector->base,
> connector->dev->mode_config.hdr_output_metadata_property, 0);
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v3 02/10] drm/bridge: dw-hdmi: add max bpc connector property
@ 2019-12-18 15:49 ` Laurent Pinchart
0 siblings, 0 replies; 39+ messages in thread
From: Laurent Pinchart @ 2019-12-18 15:49 UTC (permalink / raw)
To: Neil Armstrong
Cc: jernej.skrabec, jonas, linux-kernel, dri-devel, boris.brezillon,
linux-amlogic
Hi Neil and Jonas,
Thank you for the patch.
On Wed, Dec 18, 2019 at 04:46:29PM +0100, Neil Armstrong wrote:
> From: Jonas Karlman <jonas@kwiboo.se>
>
> Add the max_bpc property to the dw-hdmi connector to prepare support
> for 10, 12 & 16bit output support.
>
> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index 6a0b4b3a6739..e7a0600f8cc5 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -2368,6 +2368,10 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
> DRM_MODE_CONNECTOR_HDMIA,
> hdmi->ddc);
>
> + drm_atomic_helper_connector_reset(connector);
> +
> + drm_connector_attach_max_bpc_property(connector, 8, 16);
> +
I'm not asking you to rework this, but have you given any thought on how
we would be able to support this feature in a model where the bridge
wouldn't create a connector anymore (as done in the latest version of
the omapdrm series) ?
> if (hdmi->version >= 0x200a && hdmi->plat_data->use_drm_infoframe)
> drm_object_attach_property(&connector->base,
> connector->dev->mode_config.hdr_output_metadata_property, 0);
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v3 02/10] drm/bridge: dw-hdmi: add max bpc connector property
@ 2019-12-18 15:49 ` Laurent Pinchart
0 siblings, 0 replies; 39+ messages in thread
From: Laurent Pinchart @ 2019-12-18 15:49 UTC (permalink / raw)
To: Neil Armstrong
Cc: jernej.skrabec, jonas, linux-kernel, dri-devel, a.hajda,
boris.brezillon, linux-amlogic
Hi Neil and Jonas,
Thank you for the patch.
On Wed, Dec 18, 2019 at 04:46:29PM +0100, Neil Armstrong wrote:
> From: Jonas Karlman <jonas@kwiboo.se>
>
> Add the max_bpc property to the dw-hdmi connector to prepare support
> for 10, 12 & 16bit output support.
>
> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index 6a0b4b3a6739..e7a0600f8cc5 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -2368,6 +2368,10 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
> DRM_MODE_CONNECTOR_HDMIA,
> hdmi->ddc);
>
> + drm_atomic_helper_connector_reset(connector);
> +
> + drm_connector_attach_max_bpc_property(connector, 8, 16);
> +
I'm not asking you to rework this, but have you given any thought on how
we would be able to support this feature in a model where the bridge
wouldn't create a connector anymore (as done in the latest version of
the omapdrm series) ?
> if (hdmi->version >= 0x200a && hdmi->plat_data->use_drm_infoframe)
> drm_object_attach_property(&connector->base,
> connector->dev->mode_config.hdr_output_metadata_property, 0);
--
Regards,
Laurent Pinchart
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v3 02/10] drm/bridge: dw-hdmi: add max bpc connector property
2019-12-18 15:49 ` Laurent Pinchart
(?)
@ 2019-12-19 8:52 ` Neil Armstrong
-1 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-19 8:52 UTC (permalink / raw)
To: Laurent Pinchart
Cc: a.hajda, jonas, jernej.skrabec, boris.brezillon, linux-amlogic,
dri-devel, linux-kernel
On 18/12/2019 16:49, Laurent Pinchart wrote:
> Hi Neil and Jonas,
>
> Thank you for the patch.
>
> On Wed, Dec 18, 2019 at 04:46:29PM +0100, Neil Armstrong wrote:
>> From: Jonas Karlman <jonas@kwiboo.se>
>>
>> Add the max_bpc property to the dw-hdmi connector to prepare support
>> for 10, 12 & 16bit output support.
>>
>> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> index 6a0b4b3a6739..e7a0600f8cc5 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> @@ -2368,6 +2368,10 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
>> DRM_MODE_CONNECTOR_HDMIA,
>> hdmi->ddc);
>>
>> + drm_atomic_helper_connector_reset(connector);
>> +
>> + drm_connector_attach_max_bpc_property(connector, 8, 16);
>> +
>
> I'm not asking you to rework this, but have you given any thought on how
> we would be able to support this feature in a model where the bridge
> wouldn't create a connector anymore (as done in the latest version of
> the omapdrm series) ?
Not yet, but the plan is to have this serie merged (it's on the list for more than 1y now),
then we'll switch to a separate connector.
>
>> if (hdmi->version >= 0x200a && hdmi->plat_data->use_drm_infoframe)
>> drm_object_attach_property(&connector->base,
>> connector->dev->mode_config.hdr_output_metadata_property, 0);
>
Neil
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v3 02/10] drm/bridge: dw-hdmi: add max bpc connector property
@ 2019-12-19 8:52 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-19 8:52 UTC (permalink / raw)
To: Laurent Pinchart
Cc: jernej.skrabec, jonas, linux-kernel, dri-devel, boris.brezillon,
linux-amlogic
On 18/12/2019 16:49, Laurent Pinchart wrote:
> Hi Neil and Jonas,
>
> Thank you for the patch.
>
> On Wed, Dec 18, 2019 at 04:46:29PM +0100, Neil Armstrong wrote:
>> From: Jonas Karlman <jonas@kwiboo.se>
>>
>> Add the max_bpc property to the dw-hdmi connector to prepare support
>> for 10, 12 & 16bit output support.
>>
>> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> index 6a0b4b3a6739..e7a0600f8cc5 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> @@ -2368,6 +2368,10 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
>> DRM_MODE_CONNECTOR_HDMIA,
>> hdmi->ddc);
>>
>> + drm_atomic_helper_connector_reset(connector);
>> +
>> + drm_connector_attach_max_bpc_property(connector, 8, 16);
>> +
>
> I'm not asking you to rework this, but have you given any thought on how
> we would be able to support this feature in a model where the bridge
> wouldn't create a connector anymore (as done in the latest version of
> the omapdrm series) ?
Not yet, but the plan is to have this serie merged (it's on the list for more than 1y now),
then we'll switch to a separate connector.
>
>> if (hdmi->version >= 0x200a && hdmi->plat_data->use_drm_infoframe)
>> drm_object_attach_property(&connector->base,
>> connector->dev->mode_config.hdr_output_metadata_property, 0);
>
Neil
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v3 02/10] drm/bridge: dw-hdmi: add max bpc connector property
@ 2019-12-19 8:52 ` Neil Armstrong
0 siblings, 0 replies; 39+ messages in thread
From: Neil Armstrong @ 2019-12-19 8:52 UTC (permalink / raw)
To: Laurent Pinchart
Cc: jernej.skrabec, jonas, linux-kernel, dri-devel, a.hajda,
boris.brezillon, linux-amlogic
On 18/12/2019 16:49, Laurent Pinchart wrote:
> Hi Neil and Jonas,
>
> Thank you for the patch.
>
> On Wed, Dec 18, 2019 at 04:46:29PM +0100, Neil Armstrong wrote:
>> From: Jonas Karlman <jonas@kwiboo.se>
>>
>> Add the max_bpc property to the dw-hdmi connector to prepare support
>> for 10, 12 & 16bit output support.
>>
>> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> index 6a0b4b3a6739..e7a0600f8cc5 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> @@ -2368,6 +2368,10 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
>> DRM_MODE_CONNECTOR_HDMIA,
>> hdmi->ddc);
>>
>> + drm_atomic_helper_connector_reset(connector);
>> +
>> + drm_connector_attach_max_bpc_property(connector, 8, 16);
>> +
>
> I'm not asking you to rework this, but have you given any thought on how
> we would be able to support this feature in a model where the bridge
> wouldn't create a connector anymore (as done in the latest version of
> the omapdrm series) ?
Not yet, but the plan is to have this serie merged (it's on the list for more than 1y now),
then we'll switch to a separate connector.
>
>> if (hdmi->version >= 0x200a && hdmi->plat_data->use_drm_infoframe)
>> drm_object_attach_property(&connector->base,
>> connector->dev->mode_config.hdr_output_metadata_property, 0);
>
Neil
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 39+ messages in thread
end of thread, other threads:[~2019-12-19 8:52 UTC | newest]
Thread overview: 39+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-18 15:46 [PATCH v3 00/10] drm/bridge: dw-hdmi: implement bus-format negotiation and YUV420 support Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` [PATCH v3 01/10] drm/bridge: dw-hdmi: set mtmdsclock for deep color Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` [PATCH v3 02/10] drm/bridge: dw-hdmi: add max bpc connector property Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:49 ` Laurent Pinchart
2019-12-18 15:49 ` Laurent Pinchart
2019-12-18 15:49 ` Laurent Pinchart
2019-12-19 8:52 ` Neil Armstrong
2019-12-19 8:52 ` Neil Armstrong
2019-12-19 8:52 ` Neil Armstrong
2019-12-18 15:46 ` [PATCH v3 03/10] drm/bridge: synopsys: dw-hdmi: add bus format negociation Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` [PATCH v3 04/10] drm/bridge: synopsys: dw-hdmi: allow ycbcr420 modes for >= 0x200a Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` [PATCH v3 05/10] drm/meson: venc: make drm_display_mode const Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` [PATCH v3 06/10] drm/meson: meson_dw_hdmi: add bridge and switch to drm_bridge_funcs Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` [PATCH v3 07/10] drm/meson: dw-hdmi: stop enforcing input_bus_format Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` [PATCH v3 08/10] drm/meson: venc: add support for YUV420 setup Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` [PATCH v3 09/10] drm/meson: vclk: " Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` [PATCH v3 10/10] drm/meson: Add YUV420 output support Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
2019-12-18 15:46 ` Neil Armstrong
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.