All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Ohad Ben-Cohen <ohad@wizery.com>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	Sibi Sankar <sibis@codeaurora.org>,
	Rishabh Bhatnagar <rishabhb@codeaurora.org>
Subject: [PATCH v2 3/8] remoteproc: qcom: Update IMEM PIL info on load
Date: Thu, 26 Dec 2019 21:32:10 -0800	[thread overview]
Message-ID: <20191227053215.423811-4-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20191227053215.423811-1-bjorn.andersson@linaro.org>

Update the PIL info region structure in IMEM with information about
where the firmware for various remoteprocs are loaded.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- Squashed patches for the individual drivers into one
- Probe defer on qcom_pil_info_available()

 drivers/remoteproc/Kconfig          |  3 +++
 drivers/remoteproc/qcom_q6v5_adsp.c | 19 ++++++++++++++++---
 drivers/remoteproc/qcom_q6v5_mss.c  |  6 ++++++
 drivers/remoteproc/qcom_q6v5_pas.c  | 18 +++++++++++++++---
 drivers/remoteproc/qcom_wcnss.c     | 17 ++++++++++++++---
 5 files changed, 54 insertions(+), 9 deletions(-)

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 0798602e355a..84922bb922e0 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -135,6 +135,7 @@ config QCOM_Q6V5_PAS
 	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 	depends on QCOM_SYSMON || QCOM_SYSMON=n
 	select MFD_SYSCON
+	select QCOM_PIL_INFO
 	select QCOM_MDT_LOADER
 	select QCOM_Q6V5_COMMON
 	select QCOM_RPROC_COMMON
@@ -152,6 +153,7 @@ config QCOM_Q6V5_WCSS
 	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 	depends on QCOM_SYSMON || QCOM_SYSMON=n
 	select MFD_SYSCON
+	select QCOM_PIL_INFO
 	select QCOM_MDT_LOADER
 	select QCOM_Q6V5_COMMON
 	select QCOM_RPROC_COMMON
@@ -183,6 +185,7 @@ config QCOM_WCNSS_PIL
 	depends on QCOM_SMEM
 	depends on QCOM_SYSMON || QCOM_SYSMON=n
 	select QCOM_MDT_LOADER
+	select QCOM_PIL_INFO
 	select QCOM_RPROC_COMMON
 	select QCOM_SCM
 	help
diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index e953886b2eb7..1a942c92d974 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -26,6 +26,7 @@
 #include <linux/soc/qcom/smem_state.h>
 
 #include "qcom_common.h"
+#include "qcom_pil_info.h"
 #include "qcom_q6v5.h"
 #include "remoteproc_internal.h"
 
@@ -82,6 +83,7 @@ struct qcom_adsp {
 	unsigned int halt_lpass;
 
 	int crash_reason_smem;
+	const char *info_name;
 
 	struct completion start_done;
 	struct completion stop_done;
@@ -164,10 +166,17 @@ static int qcom_adsp_shutdown(struct qcom_adsp *adsp)
 static int adsp_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
+	int ret;
+
+	ret = qcom_mdt_load_no_init(adsp->dev, fw, rproc->firmware, 0,
+				    adsp->mem_region, adsp->mem_phys, adsp->mem_size,
+				    &adsp->mem_reloc);
+	if (ret)
+		return ret;
 
-	return qcom_mdt_load_no_init(adsp->dev, fw, rproc->firmware, 0,
-			     adsp->mem_region, adsp->mem_phys, adsp->mem_size,
-			     &adsp->mem_reloc);
+	qcom_pil_info_store(adsp->info_name, adsp->mem_reloc, adsp->mem_size);
+
+	return 0;
 }
 
 static int adsp_start(struct rproc *rproc)
@@ -413,6 +422,9 @@ static int adsp_probe(struct platform_device *pdev)
 	struct rproc *rproc;
 	int ret;
 
+	if (!qcom_pil_info_available())
+		return -EPROBE_DEFER;
+
 	desc = of_device_get_match_data(&pdev->dev);
 	if (!desc)
 		return -EINVAL;
@@ -427,6 +439,7 @@ static int adsp_probe(struct platform_device *pdev)
 	adsp = (struct qcom_adsp *)rproc->priv;
 	adsp->dev = &pdev->dev;
 	adsp->rproc = rproc;
+	adsp->info_name = desc->sysmon_name;
 	platform_set_drvdata(pdev, adsp);
 
 	ret = adsp_alloc_memory_region(adsp);
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 471128a2e723..6360e69b54e4 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -28,6 +28,7 @@
 
 #include "remoteproc_internal.h"
 #include "qcom_common.h"
+#include "qcom_pil_info.h"
 #include "qcom_q6v5.h"
 
 #include <linux/qcom_scm.h>
@@ -1052,6 +1053,8 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 	else if (ret < 0)
 		dev_err(qproc->dev, "MPSS authentication failed: %d\n", ret);
 
+	qcom_pil_info_store("modem", mpss_reloc, qproc->mpss_size);
+
 release_firmware:
 	release_firmware(fw);
 out:
@@ -1400,6 +1403,9 @@ static int q6v5_probe(struct platform_device *pdev)
 	if (desc->need_mem_protection && !qcom_scm_is_available())
 		return -EPROBE_DEFER;
 
+	if (!qcom_pil_info_available())
+		return -EPROBE_DEFER;
+
 	mba_image = desc->hexagon_mba_image;
 	ret = of_property_read_string_index(pdev->dev.of_node, "firmware-name",
 					    0, &mba_image);
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index b890e6e305f3..4dcdf1301e50 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -25,6 +25,7 @@
 #include <linux/soc/qcom/smem_state.h>
 
 #include "qcom_common.h"
+#include "qcom_pil_info.h"
 #include "qcom_q6v5.h"
 #include "remoteproc_internal.h"
 
@@ -64,6 +65,7 @@ struct qcom_adsp {
 	int pas_id;
 	int crash_reason_smem;
 	bool has_aggre2_clk;
+	const char *info_name;
 
 	struct completion start_done;
 	struct completion stop_done;
@@ -117,11 +119,17 @@ static void adsp_pds_disable(struct qcom_adsp *adsp, struct device **pds,
 static int adsp_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
+	int ret;
+
+	ret = qcom_mdt_load(adsp->dev, fw, rproc->firmware, adsp->pas_id,
+			    adsp->mem_region, adsp->mem_phys, adsp->mem_size,
+			    &adsp->mem_reloc);
+	if (ret)
+		return ret;
 
-	return qcom_mdt_load(adsp->dev, fw, rproc->firmware, adsp->pas_id,
-			     adsp->mem_region, adsp->mem_phys, adsp->mem_size,
-			     &adsp->mem_reloc);
+	qcom_pil_info_store(adsp->info_name, adsp->mem_reloc, adsp->mem_size);
 
+	return 0;
 }
 
 static int adsp_start(struct rproc *rproc)
@@ -376,6 +384,9 @@ static int adsp_probe(struct platform_device *pdev)
 	if (!qcom_scm_is_available())
 		return -EPROBE_DEFER;
 
+	if (!qcom_pil_info_available())
+		return -EPROBE_DEFER;
+
 	fw_name = desc->firmware_name;
 	ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
 				      &fw_name);
@@ -396,6 +407,7 @@ static int adsp_probe(struct platform_device *pdev)
 	adsp->rproc = rproc;
 	adsp->pas_id = desc->pas_id;
 	adsp->has_aggre2_clk = desc->has_aggre2_clk;
+	adsp->info_name = desc->sysmon_name;
 	platform_set_drvdata(pdev, adsp);
 
 	ret = adsp_alloc_memory_region(adsp);
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index dc135754bb9c..2c1cefeacf97 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -27,6 +27,7 @@
 
 #include "qcom_common.h"
 #include "remoteproc_internal.h"
+#include "qcom_pil_info.h"
 #include "qcom_wcnss.h"
 
 #define WCNSS_CRASH_REASON_SMEM		422
@@ -145,10 +146,17 @@ void qcom_wcnss_assign_iris(struct qcom_wcnss *wcnss,
 static int wcnss_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
+	int ret;
+
+	ret = qcom_mdt_load(wcnss->dev, fw, rproc->firmware, WCNSS_PAS_ID,
+			    wcnss->mem_region, wcnss->mem_phys,
+			    wcnss->mem_size, &wcnss->mem_reloc);
+	if (ret)
+		return ret;
 
-	return qcom_mdt_load(wcnss->dev, fw, rproc->firmware, WCNSS_PAS_ID,
-			     wcnss->mem_region, wcnss->mem_phys,
-			     wcnss->mem_size, &wcnss->mem_reloc);
+	qcom_pil_info_store("wcnss", wcnss->mem_reloc, wcnss->mem_size);
+
+	return 0;
 }
 
 static void wcnss_indicate_nv_download(struct qcom_wcnss *wcnss)
@@ -469,6 +477,9 @@ static int wcnss_probe(struct platform_device *pdev)
 	if (!qcom_scm_is_available())
 		return -EPROBE_DEFER;
 
+	if (!qcom_pil_info_available())
+		return -EPROBE_DEFER;
+
 	if (!qcom_scm_pas_supported(WCNSS_PAS_ID)) {
 		dev_err(&pdev->dev, "PAS is not available for WCNSS\n");
 		return -ENXIO;
-- 
2.24.0

  parent reply	other threads:[~2019-12-27  5:32 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-27  5:32 [PATCH v2 0/8] remoteproc: qcom: post mortem debug support Bjorn Andersson
2019-12-27  5:32 ` [PATCH v2 1/8] dt-bindings: remoteproc: Add Qualcomm PIL info binding Bjorn Andersson
2020-01-04 21:38   ` Rob Herring
2020-01-04 22:17     ` Bjorn Andersson
2020-01-04 22:17       ` Bjorn Andersson
2020-01-23 22:07       ` Rob Herring
2020-01-23 22:07         ` Rob Herring
2019-12-27  5:32 ` [PATCH v2 2/8] remoteproc: qcom: Introduce driver to store pil info in IMEM Bjorn Andersson
2020-01-10 21:18   ` Mathieu Poirier
2020-01-22  2:02     ` Bjorn Andersson
2020-01-22  2:02       ` Bjorn Andersson
2020-01-22 19:04       ` Mathieu Poirier
2020-01-22 19:19         ` Bjorn Andersson
2020-01-22 19:19           ` Bjorn Andersson
2020-01-22 22:56   ` rishabhb
2020-01-22 23:08     ` Bjorn Andersson
2020-01-22 23:08       ` Bjorn Andersson
2020-01-22 23:58       ` rishabhb
2020-01-23  5:38         ` Bjorn Andersson
2020-01-23  5:38           ` Bjorn Andersson
2019-12-27  5:32 ` Bjorn Andersson [this message]
2020-01-10 21:19   ` [PATCH v2 3/8] remoteproc: qcom: Update IMEM PIL info on load Mathieu Poirier
2019-12-27  5:32 ` [PATCH v2 4/8] arm64: dts: qcom: qcs404: Add IMEM and PIL info region Bjorn Andersson
2019-12-27  5:32 ` [PATCH v2 5/8] arm64: dts: qcom: sdm845: " Bjorn Andersson
2019-12-27  5:32 ` [PATCH v2 6/8] remoteproc: Introduce "panic" callback in ops Bjorn Andersson
2020-01-10 21:23   ` Mathieu Poirier
2020-01-30 10:07     ` Arnaud POULIQUEN
2020-01-30 10:07       ` Arnaud POULIQUEN
2019-12-27  5:32 ` [PATCH v2 7/8] remoteproc: qcom: q6v5: Add common panic handler Bjorn Andersson
2020-01-10 21:28   ` Mathieu Poirier
2020-01-22 19:39     ` Bjorn Andersson
2020-01-22 19:39       ` Bjorn Andersson
2020-01-23 17:01       ` Mathieu Poirier
2020-01-23 17:15         ` Bjorn Andersson
2020-01-23 17:15           ` Bjorn Andersson
2020-01-23 17:49           ` Arnaud POULIQUEN
2020-01-23 17:49             ` Arnaud POULIQUEN
2020-01-24 18:44             ` Mathieu Poirier
2020-01-27  9:46               ` Arnaud POULIQUEN
2020-01-27  9:46                 ` Arnaud POULIQUEN
2020-01-29 20:15                 ` Mathieu Poirier
2020-01-29 20:15                   ` Mathieu Poirier
2020-01-30 10:00                   ` Arnaud POULIQUEN
2020-01-30 10:00                     ` Arnaud POULIQUEN
2019-12-27  5:32 ` [PATCH v2 8/8] remoteproc: qcom: Introduce panic handler for PAS and ADSP Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191227053215.423811-4-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=ohad@wizery.com \
    --cc=rishabhb@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=sibis@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.