[PATCH AUTOSEL 5.4 001/187] ASoC: rt5682: fix i2c arbitration lost issue

[PATCH AUTOSEL 5.4 001/187] ASoC: rt5682: fix i2c arbitration lost issue

[Sasha Levin]

From: Shuming Fan <shumingf@realtek.com>

[ Upstream commit bc094709de0192a756c6946a7c89c543243ae609 ]

This patch modified the HW initial setting to fix i2c arbitration lost issue.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191125091940.11953-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5682.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index c50b75ce82e0..05e883a65d7a 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -72,6 +72,7 @@ struct rt5682_priv {
 static const struct reg_sequence patch_list[] = {
 	{RT5682_HP_IMP_SENS_CTRL_19, 0x1000},
 	{RT5682_DAC_ADC_DIG_VOL1, 0xa020},
+	{RT5682_I2C_CTRL, 0x000f},
 };
 
 static const struct reg_default rt5682_reg[] = {
@@ -2481,6 +2482,7 @@ static void rt5682_calibrate(struct rt5682_priv *rt5682)
 	mutex_lock(&rt5682->calibrate_mutex);
 
 	rt5682_reset(rt5682->regmap);
+	regmap_write(rt5682->regmap, RT5682_I2C_CTRL, 0x000f);
 	regmap_write(rt5682->regmap, RT5682_PWR_ANLG_1, 0xa2af);
 	usleep_range(15000, 20000);
 	regmap_write(rt5682->regmap, RT5682_PWR_ANLG_1, 0xf2af);
-- 
2.20.1

[alsa-devel] [PATCH AUTOSEL 5.4 001/187] ASoC: rt5682: fix i2c arbitration lost issue

[Sasha Levin]

From: Shuming Fan <shumingf@realtek.com>

[ Upstream commit bc094709de0192a756c6946a7c89c543243ae609 ]

This patch modified the HW initial setting to fix i2c arbitration lost issue.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191125091940.11953-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5682.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index c50b75ce82e0..05e883a65d7a 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -72,6 +72,7 @@ struct rt5682_priv {
 static const struct reg_sequence patch_list[] = {
 	{RT5682_HP_IMP_SENS_CTRL_19, 0x1000},
 	{RT5682_DAC_ADC_DIG_VOL1, 0xa020},
+	{RT5682_I2C_CTRL, 0x000f},
 };
 
 static const struct reg_default rt5682_reg[] = {
@@ -2481,6 +2482,7 @@ static void rt5682_calibrate(struct rt5682_priv *rt5682)
 	mutex_lock(&rt5682->calibrate_mutex);
 
 	rt5682_reset(rt5682->regmap);
+	regmap_write(rt5682->regmap, RT5682_I2C_CTRL, 0x000f);
 	regmap_write(rt5682->regmap, RT5682_PWR_ANLG_1, 0xa2af);
 	usleep_range(15000, 20000);
 	regmap_write(rt5682->regmap, RT5682_PWR_ANLG_1, 0xf2af);
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[PATCH AUTOSEL 5.4 002/187] spi: pxa2xx: Add support for Intel Jasper Lake

[Sasha Levin]

From: Jarkko Nikula <jarkko.nikula@linux.intel.com>

[ Upstream commit 9c7315c9fca5de203538163cf42699bb10328902 ]

LPSS SPI on Intel Jasper Lake is compatible with Intel Ice Lake which
follows Intel Cannon Lake. Add PCI IDs of Jasper Lake.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20191125125159.15404-1-jarkko.nikula@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index bb6a14d1ab0f..3580a551c038 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1441,6 +1441,10 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
 	{ PCI_VDEVICE(INTEL, 0x4b2a), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x4b2b), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x4b37), LPSS_BXT_SSP },
+	/* JSL */
+	{ PCI_VDEVICE(INTEL, 0x4daa), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0x4dab), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0x4dfb), LPSS_CNL_SSP },
 	/* APL */
 	{ PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },
-- 
2.20.1

[PATCH AUTOSEL 5.4 002/187] spi: pxa2xx: Add support for Intel Jasper Lake

[Sasha Levin]

From: Jarkko Nikula <jarkko.nikula@linux.intel.com>

[ Upstream commit 9c7315c9fca5de203538163cf42699bb10328902 ]

LPSS SPI on Intel Jasper Lake is compatible with Intel Ice Lake which
follows Intel Cannon Lake. Add PCI IDs of Jasper Lake.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20191125125159.15404-1-jarkko.nikula@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index bb6a14d1ab0f..3580a551c038 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1441,6 +1441,10 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
 	{ PCI_VDEVICE(INTEL, 0x4b2a), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x4b2b), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x4b37), LPSS_BXT_SSP },
+	/* JSL */
+	{ PCI_VDEVICE(INTEL, 0x4daa), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0x4dab), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0x4dfb), LPSS_CNL_SSP },
 	/* APL */
 	{ PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },
-- 
2.20.1

[PATCH AUTOSEL 5.4 002/187] spi: pxa2xx: Add support for Intel Jasper Lake

[Sasha Levin]

From: Jarkko Nikula <jarkko.nikula@linux.intel.com>

[ Upstream commit 9c7315c9fca5de203538163cf42699bb10328902 ]

LPSS SPI on Intel Jasper Lake is compatible with Intel Ice Lake which
follows Intel Cannon Lake. Add PCI IDs of Jasper Lake.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20191125125159.15404-1-jarkko.nikula@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index bb6a14d1ab0f..3580a551c038 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1441,6 +1441,10 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
 	{ PCI_VDEVICE(INTEL, 0x4b2a), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x4b2b), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x4b37), LPSS_BXT_SSP },
+	/* JSL */
+	{ PCI_VDEVICE(INTEL, 0x4daa), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0x4dab), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0x4dfb), LPSS_CNL_SSP },
 	/* APL */
 	{ PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 003/187] regulator: fix use after free issue

[Sasha Levin]

From: Wen Yang <wenyang@linux.alibaba.com>

[ Upstream commit 4affd79a125ac91e6a53be843ea3960a8fc00cbb ]

This is caused by dereferencing 'rdev' after put_device() in
the _regulator_get()/_regulator_put() functions.
This patch just moves the put_device() down a bit to avoid the
issue.

Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20191124145835.25999-1-wenyang@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index a46be221dbdc..71c1467e1e2e 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1935,8 +1935,8 @@ struct regulator *_regulator_get(struct device *dev, const char *id,
 	regulator = create_regulator(rdev, dev, id);
 	if (regulator == NULL) {
 		regulator = ERR_PTR(-ENOMEM);
-		put_device(&rdev->dev);
 		module_put(rdev->owner);
+		put_device(&rdev->dev);
 		return regulator;
 	}
 
@@ -2057,13 +2057,13 @@ static void _regulator_put(struct regulator *regulator)
 
 	rdev->open_count--;
 	rdev->exclusive = 0;
-	put_device(&rdev->dev);
 	regulator_unlock(rdev);
 
 	kfree_const(regulator->supply_name);
 	kfree(regulator);
 
 	module_put(rdev->owner);
+	put_device(&rdev->dev);
 }
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 5.4 004/187] spi: cadence: Correct handling of native chipselect

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 61acd19f9c56fa0809285346bd0bd4a926ab0da0 ]

To fix a regression on the Cadence SPI driver, this patch reverts
commit 6046f5407ff0 ("spi: cadence: Fix default polarity of native
chipselect").

This patch was not the correct fix for the issue. The SPI framework
calls the set_cs line with the logic level it desires on the chip select
line, as such the old is_high handling was correct. However, this was
broken by the fact that before commit 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH
setting when using native and GPIO CS") all controllers that offered
the use of a GPIO chip select had SPI_CS_HIGH applied, even for hardware
chip selects. This caused the value passed into the driver to be inverted.
Which unfortunately makes it look like a logical enable the chip select
value.

Since the core was corrected to not unconditionally apply SPI_CS_HIGH,
the Cadence driver, whilst using the hardware chip select, will deselect
the chip select every time we attempt to communicate with the device,
which results in failed communications.

Fixes: 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191126164140.6240-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-cadence.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c
index c36587b42e95..82a0ee09cbe1 100644
--- a/drivers/spi/spi-cadence.c
+++ b/drivers/spi/spi-cadence.c
@@ -168,16 +168,16 @@ static void cdns_spi_init_hw(struct cdns_spi *xspi)
 /**
  * cdns_spi_chipselect - Select or deselect the chip select line
  * @spi:	Pointer to the spi_device structure
- * @enable:	Select (1) or deselect (0) the chip select line
+ * @is_high:	Select(0) or deselect (1) the chip select line
  */
-static void cdns_spi_chipselect(struct spi_device *spi, bool enable)
+static void cdns_spi_chipselect(struct spi_device *spi, bool is_high)
 {
 	struct cdns_spi *xspi = spi_master_get_devdata(spi->master);
 	u32 ctrl_reg;
 
 	ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR);
 
-	if (!enable) {
+	if (is_high) {
 		/* Deselect the slave */
 		ctrl_reg |= CDNS_SPI_CR_SSCTRL;
 	} else {
-- 
2.20.1

[PATCH AUTOSEL 5.4 005/187] ASoC: max98090: remove msleep in PLL unlocked workaround

[Sasha Levin]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit acb874a7c049ec49d8fc66c893170fb42c01bdf7 ]

It was observed Baytrail-based chromebooks could cause continuous PLL
unlocked when using playback stream and capture stream simultaneously.
Specifically, starting a capture stream after started a playback stream.
As a result, the audio data could corrupt or turn completely silent.

As the datasheet suggested, the maximum PLL lock time should be 7 msec.
The workaround resets the codec softly by toggling SHDN off and on if
PLL failed to lock for 10 msec.  Notably, there is no suggested hold
time for SHDN off.

On Baytrail-based chromebooks, it would easily happen continuous PLL
unlocked if there is a 10 msec delay between SHDN off and on.  Removes
the msleep().

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-2-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index f6bf4cfbea23..12cb87c0d463 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -2114,10 +2114,16 @@ static void max98090_pll_work(struct work_struct *work)
 
 	dev_info_ratelimited(component->dev, "PLL unlocked\n");
 
+	/*
+	 * As the datasheet suggested, the maximum PLL lock time should be
+	 * 7 msec.  The workaround resets the codec softly by toggling SHDN
+	 * off and on if PLL failed to lock for 10 msec.  Notably, there is
+	 * no suggested hold time for SHDN off.
+	 */
+
 	/* Toggle shutdown OFF then ON */
 	snd_soc_component_update_bits(component, M98090_REG_DEVICE_SHUTDOWN,
 			    M98090_SHDNN_MASK, 0);
-	msleep(10);
 	snd_soc_component_update_bits(component, M98090_REG_DEVICE_SHUTDOWN,
 			    M98090_SHDNN_MASK, M98090_SHDNN_MASK);
 
-- 
2.20.1

[alsa-devel] [PATCH AUTOSEL 5.4 005/187] ASoC: max98090: remove msleep in PLL unlocked workaround

[Sasha Levin]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit acb874a7c049ec49d8fc66c893170fb42c01bdf7 ]

It was observed Baytrail-based chromebooks could cause continuous PLL
unlocked when using playback stream and capture stream simultaneously.
Specifically, starting a capture stream after started a playback stream.
As a result, the audio data could corrupt or turn completely silent.

As the datasheet suggested, the maximum PLL lock time should be 7 msec.
The workaround resets the codec softly by toggling SHDN off and on if
PLL failed to lock for 10 msec.  Notably, there is no suggested hold
time for SHDN off.

On Baytrail-based chromebooks, it would easily happen continuous PLL
unlocked if there is a 10 msec delay between SHDN off and on.  Removes
the msleep().

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-2-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index f6bf4cfbea23..12cb87c0d463 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -2114,10 +2114,16 @@ static void max98090_pll_work(struct work_struct *work)
 
 	dev_info_ratelimited(component->dev, "PLL unlocked\n");
 
+	/*
+	 * As the datasheet suggested, the maximum PLL lock time should be
+	 * 7 msec.  The workaround resets the codec softly by toggling SHDN
+	 * off and on if PLL failed to lock for 10 msec.  Notably, there is
+	 * no suggested hold time for SHDN off.
+	 */
+
 	/* Toggle shutdown OFF then ON */
 	snd_soc_component_update_bits(component, M98090_REG_DEVICE_SHUTDOWN,
 			    M98090_SHDNN_MASK, 0);
-	msleep(10);
 	snd_soc_component_update_bits(component, M98090_REG_DEVICE_SHUTDOWN,
 			    M98090_SHDNN_MASK, M98090_SHDNN_MASK);
 
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[PATCH AUTOSEL 5.4 006/187] ASoC: max98090: exit workaround earlier if PLL is locked

[Sasha Levin]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit 6f49919d11690a9b5614445ba30fde18083fdd63 ]

According to the datasheet, PLL lock time typically takes 2 msec and
at most takes 7 msec.

Check the lock status every 1 msec and exit the workaround if PLL is
locked.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-3-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index 12cb87c0d463..f531e5a11bdd 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -2108,6 +2108,8 @@ static void max98090_pll_work(struct work_struct *work)
 	struct max98090_priv *max98090 =
 		container_of(work, struct max98090_priv, pll_work);
 	struct snd_soc_component *component = max98090->component;
+	unsigned int pll;
+	int i;
 
 	if (!snd_soc_component_is_active(component))
 		return;
@@ -2127,8 +2129,16 @@ static void max98090_pll_work(struct work_struct *work)
 	snd_soc_component_update_bits(component, M98090_REG_DEVICE_SHUTDOWN,
 			    M98090_SHDNN_MASK, M98090_SHDNN_MASK);
 
-	/* Give PLL time to lock */
-	msleep(10);
+	for (i = 0; i < 10; ++i) {
+		/* Give PLL time to lock */
+		usleep_range(1000, 1200);
+
+		/* Check lock status */
+		pll = snd_soc_component_read32(
+				component, M98090_REG_DEVICE_STATUS);
+		if (!(pll & M98090_ULK_MASK))
+			break;
+	}
 }
 
 static void max98090_jack_work(struct work_struct *work)
-- 
2.20.1

[alsa-devel] [PATCH AUTOSEL 5.4 006/187] ASoC: max98090: exit workaround earlier if PLL is locked

[Sasha Levin]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit 6f49919d11690a9b5614445ba30fde18083fdd63 ]

According to the datasheet, PLL lock time typically takes 2 msec and
at most takes 7 msec.

Check the lock status every 1 msec and exit the workaround if PLL is
locked.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-3-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index 12cb87c0d463..f531e5a11bdd 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -2108,6 +2108,8 @@ static void max98090_pll_work(struct work_struct *work)
 	struct max98090_priv *max98090 =
 		container_of(work, struct max98090_priv, pll_work);
 	struct snd_soc_component *component = max98090->component;
+	unsigned int pll;
+	int i;
 
 	if (!snd_soc_component_is_active(component))
 		return;
@@ -2127,8 +2129,16 @@ static void max98090_pll_work(struct work_struct *work)
 	snd_soc_component_update_bits(component, M98090_REG_DEVICE_SHUTDOWN,
 			    M98090_SHDNN_MASK, M98090_SHDNN_MASK);
 
-	/* Give PLL time to lock */
-	msleep(10);
+	for (i = 0; i < 10; ++i) {
+		/* Give PLL time to lock */
+		usleep_range(1000, 1200);
+
+		/* Check lock status */
+		pll = snd_soc_component_read32(
+				component, M98090_REG_DEVICE_STATUS);
+		if (!(pll & M98090_ULK_MASK))
+			break;
+	}
 }
 
 static void max98090_jack_work(struct work_struct *work)
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[PATCH AUTOSEL 5.4 007/187] ASoC: max98090: fix possible race conditions

[Sasha Levin]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit 45dfbf56975994822cce00b7475732a49f8aefed ]

max98090_interrupt() and max98090_pll_work() run in 2 different threads.
There are 2 possible races:

Note: M98090_REG_DEVICE_STATUS = 0x01.
Note: ULK == 0, PLL is locked; ULK == 1, PLL is unlocked.

max98090_interrupt      max98090_pll_work
----------------------------------------------
schedule max98090_pll_work
                        restart max98090 codec
receive ULK INT
                        assert ULK == 0
schedule max98090_pll_work (1).

In the case (1), the PLL is locked but max98090_interrupt unnecessarily
schedules another max98090_pll_work.

max98090_interrupt      max98090_pll_work      max98090 codec
----------------------------------------------------------------------
                                               ULK = 1
receive ULK INT
read 0x01
                                               ULK = 0 (clear on read)
schedule max98090_pll_work
                        restart max98090 codec
                                               ULK = 1
receive ULK INT
read 0x01
                                               ULK = 0 (clear on read)
                        read 0x01
                        assert ULK == 0 (2).

In the case (2), both max98090_interrupt and max98090_pll_work read
the same clear-on-read register.  max98090_pll_work would falsely
thought PLL is locked.
Note: the case (2) race is introduced by the previous commit ("ASoC:
max98090: exit workaround earlier if PLL is locked") to check the status
and exit the loop earlier in max98090_pll_work.

There are 2 possible solution options:
A. turn off ULK interrupt before scheduling max98090_pll_work; and turn
on again before exiting max98090_pll_work.
B. remove the second thread of execution.

Option A cannot fix the case (2) race because it still has 2 threads
access the same clear-on-read register simultaneously.  Although we
could suppose the register is volatile and read the status via I2C could
be much slower than the hardware raises the bits.

Option B introduces a maximum 10~12 msec penalty delay in the interrupt
handler.  However, it could only punish the jack detection by extra
10~12 msec.

Adopts option B which is the better solution overall.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-4-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 8 ++------
 sound/soc/codecs/max98090.h | 1 -
 2 files changed, 2 insertions(+), 7 deletions(-)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index f531e5a11bdd..e46b6ada13b1 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -2103,10 +2103,8 @@ static void max98090_pll_det_disable_work(struct work_struct *work)
 			    M98090_IULK_MASK, 0);
 }
 
-static void max98090_pll_work(struct work_struct *work)
+static void max98090_pll_work(struct max98090_priv *max98090)
 {
-	struct max98090_priv *max98090 =
-		container_of(work, struct max98090_priv, pll_work);
 	struct snd_soc_component *component = max98090->component;
 	unsigned int pll;
 	int i;
@@ -2275,7 +2273,7 @@ static irqreturn_t max98090_interrupt(int irq, void *data)
 
 	if (active & M98090_ULK_MASK) {
 		dev_dbg(component->dev, "M98090_ULK_MASK\n");
-		schedule_work(&max98090->pll_work);
+		max98090_pll_work(max98090);
 	}
 
 	if (active & M98090_JDET_MASK) {
@@ -2438,7 +2436,6 @@ static int max98090_probe(struct snd_soc_component *component)
 			  max98090_pll_det_enable_work);
 	INIT_WORK(&max98090->pll_det_disable_work,
 		  max98090_pll_det_disable_work);
-	INIT_WORK(&max98090->pll_work, max98090_pll_work);
 
 	/* Enable jack detection */
 	snd_soc_component_write(component, M98090_REG_JACK_DETECT,
@@ -2491,7 +2488,6 @@ static void max98090_remove(struct snd_soc_component *component)
 	cancel_delayed_work_sync(&max98090->jack_work);
 	cancel_delayed_work_sync(&max98090->pll_det_enable_work);
 	cancel_work_sync(&max98090->pll_det_disable_work);
-	cancel_work_sync(&max98090->pll_work);
 	max98090->component = NULL;
 }
 
diff --git a/sound/soc/codecs/max98090.h b/sound/soc/codecs/max98090.h
index 57965cd678b4..a197114b0dad 100644
--- a/sound/soc/codecs/max98090.h
+++ b/sound/soc/codecs/max98090.h
@@ -1530,7 +1530,6 @@ struct max98090_priv {
 	struct delayed_work jack_work;
 	struct delayed_work pll_det_enable_work;
 	struct work_struct pll_det_disable_work;
-	struct work_struct pll_work;
 	struct snd_soc_jack *jack;
 	unsigned int dai_fmt;
 	int tdm_slots;
-- 
2.20.1

[alsa-devel] [PATCH AUTOSEL 5.4 007/187] ASoC: max98090: fix possible race conditions

[Sasha Levin]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit 45dfbf56975994822cce00b7475732a49f8aefed ]

max98090_interrupt() and max98090_pll_work() run in 2 different threads.
There are 2 possible races:

Note: M98090_REG_DEVICE_STATUS = 0x01.
Note: ULK == 0, PLL is locked; ULK == 1, PLL is unlocked.

max98090_interrupt      max98090_pll_work
----------------------------------------------
schedule max98090_pll_work
                        restart max98090 codec
receive ULK INT
                        assert ULK == 0
schedule max98090_pll_work (1).

In the case (1), the PLL is locked but max98090_interrupt unnecessarily
schedules another max98090_pll_work.

max98090_interrupt      max98090_pll_work      max98090 codec
----------------------------------------------------------------------
                                               ULK = 1
receive ULK INT
read 0x01
                                               ULK = 0 (clear on read)
schedule max98090_pll_work
                        restart max98090 codec
                                               ULK = 1
receive ULK INT
read 0x01
                                               ULK = 0 (clear on read)
                        read 0x01
                        assert ULK == 0 (2).

In the case (2), both max98090_interrupt and max98090_pll_work read
the same clear-on-read register.  max98090_pll_work would falsely
thought PLL is locked.
Note: the case (2) race is introduced by the previous commit ("ASoC:
max98090: exit workaround earlier if PLL is locked") to check the status
and exit the loop earlier in max98090_pll_work.

There are 2 possible solution options:
A. turn off ULK interrupt before scheduling max98090_pll_work; and turn
on again before exiting max98090_pll_work.
B. remove the second thread of execution.

Option A cannot fix the case (2) race because it still has 2 threads
access the same clear-on-read register simultaneously.  Although we
could suppose the register is volatile and read the status via I2C could
be much slower than the hardware raises the bits.

Option B introduces a maximum 10~12 msec penalty delay in the interrupt
handler.  However, it could only punish the jack detection by extra
10~12 msec.

Adopts option B which is the better solution overall.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-4-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 8 ++------
 sound/soc/codecs/max98090.h | 1 -
 2 files changed, 2 insertions(+), 7 deletions(-)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index f531e5a11bdd..e46b6ada13b1 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -2103,10 +2103,8 @@ static void max98090_pll_det_disable_work(struct work_struct *work)
 			    M98090_IULK_MASK, 0);
 }
 
-static void max98090_pll_work(struct work_struct *work)
+static void max98090_pll_work(struct max98090_priv *max98090)
 {
-	struct max98090_priv *max98090 =
-		container_of(work, struct max98090_priv, pll_work);
 	struct snd_soc_component *component = max98090->component;
 	unsigned int pll;
 	int i;
@@ -2275,7 +2273,7 @@ static irqreturn_t max98090_interrupt(int irq, void *data)
 
 	if (active & M98090_ULK_MASK) {
 		dev_dbg(component->dev, "M98090_ULK_MASK\n");
-		schedule_work(&max98090->pll_work);
+		max98090_pll_work(max98090);
 	}
 
 	if (active & M98090_JDET_MASK) {
@@ -2438,7 +2436,6 @@ static int max98090_probe(struct snd_soc_component *component)
 			  max98090_pll_det_enable_work);
 	INIT_WORK(&max98090->pll_det_disable_work,
 		  max98090_pll_det_disable_work);
-	INIT_WORK(&max98090->pll_work, max98090_pll_work);
 
 	/* Enable jack detection */
 	snd_soc_component_write(component, M98090_REG_JACK_DETECT,
@@ -2491,7 +2488,6 @@ static void max98090_remove(struct snd_soc_component *component)
 	cancel_delayed_work_sync(&max98090->jack_work);
 	cancel_delayed_work_sync(&max98090->pll_det_enable_work);
 	cancel_work_sync(&max98090->pll_det_disable_work);
-	cancel_work_sync(&max98090->pll_work);
 	max98090->component = NULL;
 }
 
diff --git a/sound/soc/codecs/max98090.h b/sound/soc/codecs/max98090.h
index 57965cd678b4..a197114b0dad 100644
--- a/sound/soc/codecs/max98090.h
+++ b/sound/soc/codecs/max98090.h
@@ -1530,7 +1530,6 @@ struct max98090_priv {
 	struct delayed_work jack_work;
 	struct delayed_work pll_det_enable_work;
 	struct work_struct pll_det_disable_work;
-	struct work_struct pll_work;
 	struct snd_soc_jack *jack;
 	unsigned int dai_fmt;
 	int tdm_slots;
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[PATCH AUTOSEL 5.4 008/187] mwifiex: fix possible heap overflow in mwifiex_process_country_ie()

[Sasha Levin]

From: Ganapathi Bhat <gbhat@marvell.com>

[ Upstream commit 3d94a4a8373bf5f45cf5f939e88b8354dbf2311b ]

mwifiex_process_country_ie() function parse elements of bss
descriptor in beacon packet. When processing WLAN_EID_COUNTRY
element, there is no upper limit check for country_ie_len before
calling memcpy. The destination buffer domain_info->triplet is an
array of length MWIFIEX_MAX_TRIPLET_802_11D(83). The remote
attacker can build a fake AP with the same ssid as real AP, and
send malicous beacon packet with long WLAN_EID_COUNTRY elemen
(country_ie_len > 83). Attacker can  force STA connect to fake AP
on a different channel. When the victim STA connects to fake AP,
will trigger the heap buffer overflow. Fix this by checking for
length and if found invalid, don not connect to the AP.

This fix addresses CVE-2019-14895.

Reported-by: huangwen <huangwenabc@gmail.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/sta_ioctl.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c b/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c
index 74e50566db1f..6dd835f1efc2 100644
--- a/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c
@@ -229,6 +229,14 @@ static int mwifiex_process_country_ie(struct mwifiex_private *priv,
 			    "11D: skip setting domain info in FW\n");
 		return 0;
 	}
+
+	if (country_ie_len >
+	    (IEEE80211_COUNTRY_STRING_LEN + MWIFIEX_MAX_TRIPLET_802_11D)) {
+		mwifiex_dbg(priv->adapter, ERROR,
+			    "11D: country_ie_len overflow!, deauth AP\n");
+		return -EINVAL;
+	}
+
 	memcpy(priv->adapter->country_code, &country_ie[2], 2);
 
 	domain_info->country_code[0] = country_ie[2];
@@ -272,8 +280,9 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss,
 	priv->scan_block = false;
 
 	if (bss) {
-		if (adapter->region_code == 0x00)
-			mwifiex_process_country_ie(priv, bss);
+		if (adapter->region_code == 0x00 &&
+		    mwifiex_process_country_ie(priv, bss))
+			return -EINVAL;
 
 		/* Allocate and fill new bss descriptor */
 		bss_desc = kzalloc(sizeof(struct mwifiex_bssdescriptor),
-- 
2.20.1

[PATCH AUTOSEL 5.4 009/187] spi: dw: Correct handling of native chipselect

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit ada9e3fcc175db4538f5b5e05abf5dedf626e550 ]

This patch reverts commit 6e0a32d6f376 ("spi: dw: Fix default polarity
of native chipselect").

The SPI framework always called the set_cs callback with the logic
level it desired on the chip select line, which is what the drivers
original handling supported. commit f3186dd87669 ("spi: Optionally
use GPIO descriptors for CS GPIOs") changed these symantics, but only
in the case of drivers that also support GPIO chip selects, to true
meaning apply slave select rather than logic high. This left things in
an odd state where a driver that only supports hardware chip selects,
the core would handle polarity but if the driver supported GPIOs as
well the driver should handle polarity.  At this point the reverted
change was applied to change the logic in the driver to match new
system.

This was then broken by commit 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH
setting when using native and GPIO CS") which reverted the core back
to consistently calling set_cs with a logic level.

This fix reverts the driver code back to its original state to match
the current core code. This is probably a better fix as a) the set_cs
callback is always called with consistent symantics and b) the
inversion for SPI_CS_HIGH can be handled in the core and doesn't need
to be coded in each driver supporting it.

Fixes: 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191127153936.29719-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dw.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 9a49e073e8b7..b47a9eb23ef8 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -129,10 +129,11 @@ void dw_spi_set_cs(struct spi_device *spi, bool enable)
 	struct dw_spi *dws = spi_controller_get_devdata(spi->controller);
 	struct chip_data *chip = spi_get_ctldata(spi);
 
+	/* Chip select logic is inverted from spi_set_cs() */
 	if (chip && chip->cs_control)
-		chip->cs_control(enable);
+		chip->cs_control(!enable);
 
-	if (enable)
+	if (!enable)
 		dw_writel(dws, DW_SPI_SER, BIT(spi->chip_select));
 	else if (dws->cs_override)
 		dw_writel(dws, DW_SPI_SER, 0);
-- 
2.20.1

[PATCH AUTOSEL 5.4 010/187] spi: fsl: Fix GPIO descriptor support

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit f106904968e2a075e64653b9b79dda9f0f070ab5 ]

This makes the driver actually support looking up GPIO
descriptor. A coding mistake in the initial descriptor
support patch was that it was failing to turn on the very
feature it was implementing. Mea culpa.

Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20191128083718.39177-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-fsl-spi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 4b80ace1d137..75b765f97df5 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -612,6 +612,7 @@ static struct spi_master * fsl_spi_probe(struct device *dev,
 	master->setup = fsl_spi_setup;
 	master->cleanup = fsl_spi_cleanup;
 	master->transfer_one_message = fsl_spi_do_one_msg;
+	master->use_gpio_descriptors = true;
 
 	mpc8xxx_spi = spi_master_get_devdata(master);
 	mpc8xxx_spi->max_bits_per_word = 32;
-- 
2.20.1

[PATCH AUTOSEL 5.4 011/187] gpio: Handle counting of Freescale chipselects

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 71b8f600b034c7f5780f6fb311dabfe331c64feb ]

We have a special quirk to handle the Freescale
nonstandard SPI chipselect GPIOs in the gpiolib-of.c
file, but it currently only handles the case where
the GPIOs are actually requested (gpiod_*get()).

We also need to handle that the SPI core attempts
to count the GPIOs before use, and that needs a
similar quirk in the OF part of the library.

Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20191128083718.39177-2-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib-of.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 80ea49f570f4..43ffec3a6fbb 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -23,6 +23,29 @@
 #include "gpiolib.h"
 #include "gpiolib-of.h"
 
+/**
+ * of_gpio_spi_cs_get_count() - special GPIO counting for SPI
+ * Some elder GPIO controllers need special quirks. Currently we handle
+ * the Freescale GPIO controller with bindings that doesn't use the
+ * established "cs-gpios" for chip selects but instead rely on
+ * "gpios" for the chip select lines. If we detect this, we redirect
+ * the counting of "cs-gpios" to count "gpios" transparent to the
+ * driver.
+ */
+int of_gpio_spi_cs_get_count(struct device *dev, const char *con_id)
+{
+	struct device_node *np = dev->of_node;
+
+	if (!IS_ENABLED(CONFIG_SPI_MASTER))
+		return 0;
+	if (!con_id || strcmp(con_id, "cs"))
+		return 0;
+	if (!of_device_is_compatible(np, "fsl,spi") &&
+	    !of_device_is_compatible(np, "aeroflexgaisler,spictrl"))
+		return 0;
+	return of_gpio_named_count(np, "gpios");
+}
+
 /*
  * This is used by external users of of_gpio_count() from <linux/of_gpio.h>
  *
@@ -35,6 +58,10 @@ int of_gpio_get_count(struct device *dev, const char *con_id)
 	char propname[32];
 	unsigned int i;
 
+	ret = of_gpio_spi_cs_get_count(dev, con_id);
+	if (ret > 0)
+		return ret;
+
 	for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
 		if (con_id)
 			snprintf(propname, sizeof(propname), "%s-%s",
-- 
2.20.1

[PATCH AUTOSEL 5.4 012/187] spi: fsl: Handle the single hardwired chipselect case

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 7251953d784baf7e5416afabe030a0e81de1a938 ]

The Freescale MPC8xxx had a special quirk for handling a
single hardwired chipselect, the case when we're using neither
GPIO nor native chip select: when inspecting the device tree
and finding zero "cs-gpios" on the device node the code would
assume we have a single hardwired chipselect that leaves the
device always selected.

This quirk is not handled by the new core code, so we need
to check the "cs-gpios" explicitly in the driver and set
pdata->max_chipselect = 1 which will later fall through to
the SPI master ->num_chipselect.

Make sure not to assign the chip select handler in this
case: there is no handling needed since the chip is always
selected, and this is what the old code did as well.

Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> (No tested the
Link: https://lore.kernel.org/r/20191128083718.39177-3-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-fsl-spi.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 75b765f97df5..2155294eaaeb 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -729,8 +729,18 @@ static int of_fsl_spi_probe(struct platform_device *ofdev)
 			}
 		}
 #endif
-
-		pdata->cs_control = fsl_spi_cs_control;
+		/*
+		 * Handle the case where we have one hardwired (always selected)
+		 * device on the first "chipselect". Else we let the core code
+		 * handle any GPIOs or native chip selects and assign the
+		 * appropriate callback for dealing with the CS lines. This isn't
+		 * supported on the GRLIB variant.
+		 */
+		ret = gpiod_count(dev, "cs");
+		if (ret <= 0)
+			pdata->max_chipselect = 1;
+		else
+			pdata->cs_control = fsl_spi_cs_control;
 	}
 
 	ret = of_address_to_resource(np, 0, &mem);
-- 
2.20.1

[PATCH AUTOSEL 5.4 013/187] locking/spinlock/debug: Fix various data races

[Sasha Levin]

From: Marco Elver <elver@google.com>

[ Upstream commit 1a365e822372ba24c9da0822bc583894f6f3d821 ]

This fixes various data races in spinlock_debug. By testing with KCSAN,
it is observable that the console gets spammed with data races reports,
suggesting these are extremely frequent.

Example data race report:

  read to 0xffff8ab24f403c48 of 4 bytes by task 221 on cpu 2:
   debug_spin_lock_before kernel/locking/spinlock_debug.c:85 [inline]
   do_raw_spin_lock+0x9b/0x210 kernel/locking/spinlock_debug.c:112
   __raw_spin_lock include/linux/spinlock_api_smp.h:143 [inline]
   _raw_spin_lock+0x39/0x40 kernel/locking/spinlock.c:151
   spin_lock include/linux/spinlock.h:338 [inline]
   get_partial_node.isra.0.part.0+0x32/0x2f0 mm/slub.c:1873
   get_partial_node mm/slub.c:1870 [inline]
  <snip>

  write to 0xffff8ab24f403c48 of 4 bytes by task 167 on cpu 3:
   debug_spin_unlock kernel/locking/spinlock_debug.c:103 [inline]
   do_raw_spin_unlock+0xc9/0x1a0 kernel/locking/spinlock_debug.c:138
   __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:159 [inline]
   _raw_spin_unlock_irqrestore+0x2d/0x50 kernel/locking/spinlock.c:191
   spin_unlock_irqrestore include/linux/spinlock.h:393 [inline]
   free_debug_processing+0x1b3/0x210 mm/slub.c:1214
   __slab_free+0x292/0x400 mm/slub.c:2864
  <snip>

As a side-effect, with KCSAN, this eventually locks up the console, most
likely due to deadlock, e.g. .. -> printk lock -> spinlock_debug ->
KCSAN detects data race -> kcsan_print_report() -> printk lock ->
deadlock.

This fix will 1) avoid the data races, and 2) allow using lock debugging
together with KCSAN.

Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20191120155715.28089-1-elver@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/spinlock_debug.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/kernel/locking/spinlock_debug.c b/kernel/locking/spinlock_debug.c
index 399669f7eba8..472dd462a40c 100644
--- a/kernel/locking/spinlock_debug.c
+++ b/kernel/locking/spinlock_debug.c
@@ -51,19 +51,19 @@ EXPORT_SYMBOL(__rwlock_init);
 
 static void spin_dump(raw_spinlock_t *lock, const char *msg)
 {
-	struct task_struct *owner = NULL;
+	struct task_struct *owner = READ_ONCE(lock->owner);
 
-	if (lock->owner && lock->owner != SPINLOCK_OWNER_INIT)
-		owner = lock->owner;
+	if (owner == SPINLOCK_OWNER_INIT)
+		owner = NULL;
 	printk(KERN_EMERG "BUG: spinlock %s on CPU#%d, %s/%d\n",
 		msg, raw_smp_processor_id(),
 		current->comm, task_pid_nr(current));
 	printk(KERN_EMERG " lock: %pS, .magic: %08x, .owner: %s/%d, "
 			".owner_cpu: %d\n",
-		lock, lock->magic,
+		lock, READ_ONCE(lock->magic),
 		owner ? owner->comm : "<none>",
 		owner ? task_pid_nr(owner) : -1,
-		lock->owner_cpu);
+		READ_ONCE(lock->owner_cpu));
 	dump_stack();
 }
 
@@ -80,16 +80,16 @@ static void spin_bug(raw_spinlock_t *lock, const char *msg)
 static inline void
 debug_spin_lock_before(raw_spinlock_t *lock)
 {
-	SPIN_BUG_ON(lock->magic != SPINLOCK_MAGIC, lock, "bad magic");
-	SPIN_BUG_ON(lock->owner == current, lock, "recursion");
-	SPIN_BUG_ON(lock->owner_cpu == raw_smp_processor_id(),
+	SPIN_BUG_ON(READ_ONCE(lock->magic) != SPINLOCK_MAGIC, lock, "bad magic");
+	SPIN_BUG_ON(READ_ONCE(lock->owner) == current, lock, "recursion");
+	SPIN_BUG_ON(READ_ONCE(lock->owner_cpu) == raw_smp_processor_id(),
 							lock, "cpu recursion");
 }
 
 static inline void debug_spin_lock_after(raw_spinlock_t *lock)
 {
-	lock->owner_cpu = raw_smp_processor_id();
-	lock->owner = current;
+	WRITE_ONCE(lock->owner_cpu, raw_smp_processor_id());
+	WRITE_ONCE(lock->owner, current);
 }
 
 static inline void debug_spin_unlock(raw_spinlock_t *lock)
@@ -99,8 +99,8 @@ static inline void debug_spin_unlock(raw_spinlock_t *lock)
 	SPIN_BUG_ON(lock->owner != current, lock, "wrong owner");
 	SPIN_BUG_ON(lock->owner_cpu != raw_smp_processor_id(),
 							lock, "wrong CPU");
-	lock->owner = SPINLOCK_OWNER_INIT;
-	lock->owner_cpu = -1;
+	WRITE_ONCE(lock->owner, SPINLOCK_OWNER_INIT);
+	WRITE_ONCE(lock->owner_cpu, -1);
 }
 
 /*
@@ -187,8 +187,8 @@ static inline void debug_write_lock_before(rwlock_t *lock)
 
 static inline void debug_write_lock_after(rwlock_t *lock)
 {
-	lock->owner_cpu = raw_smp_processor_id();
-	lock->owner = current;
+	WRITE_ONCE(lock->owner_cpu, raw_smp_processor_id());
+	WRITE_ONCE(lock->owner, current);
 }
 
 static inline void debug_write_unlock(rwlock_t *lock)
@@ -197,8 +197,8 @@ static inline void debug_write_unlock(rwlock_t *lock)
 	RWLOCK_BUG_ON(lock->owner != current, lock, "wrong owner");
 	RWLOCK_BUG_ON(lock->owner_cpu != raw_smp_processor_id(),
 							lock, "wrong CPU");
-	lock->owner = SPINLOCK_OWNER_INIT;
-	lock->owner_cpu = -1;
+	WRITE_ONCE(lock->owner, SPINLOCK_OWNER_INIT);
+	WRITE_ONCE(lock->owner_cpu, -1);
 }
 
 void do_raw_write_lock(rwlock_t *lock)
-- 
2.20.1

[PATCH AUTOSEL 5.4 014/187] netfilter: ctnetlink: netns exit must wait for callbacks

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 18a110b022a5c02e7dc9f6109d0bd93e58ac6ebb ]

Curtis Taylor and Jon Maxwell reported and debugged a crash on 3.10
based kernel.

Crash occurs in ctnetlink_conntrack_events because net->nfnl socket is
NULL.  The nfnl socket was set to NULL by netns destruction running on
another cpu.

The exiting network namespace calls the relevant destructors in the
following order:

1. ctnetlink_net_exit_batch

This nulls out the event callback pointer in struct netns.

2. nfnetlink_net_exit_batch

This nulls net->nfnl socket and frees it.

3. nf_conntrack_cleanup_net_list

This removes all remaining conntrack entries.

This is order is correct. The only explanation for the crash so ar is:

cpu1: conntrack is dying, eviction occurs:
 -> nf_ct_delete()
   -> nf_conntrack_event_report \
     -> nf_conntrack_eventmask_report
       -> notify->fcn() (== ctnetlink_conntrack_events).

cpu1: a. fetches rcu protected pointer to obtain ctnetlink event callback.
      b. gets interrupted.
 cpu2: runs netns exit handlers:
     a runs ctnetlink destructor, event cb pointer set to NULL.
     b runs nfnetlink destructor, nfnl socket is closed and set to NULL.
cpu1: c. resumes and trips over NULL net->nfnl.

Problem appears to be that ctnetlink_net_exit_batch only prevents future
callers of nf_conntrack_eventmask_report() from obtaining the callback.
It doesn't wait of other cpus that might have already obtained the
callbacks address.

I don't see anything in upstream kernels that would prevent similar
crash: We need to wait for all cpus to have exited the event callback.

Fixes: 9592a5c01e79dbc59eb56fa ("netfilter: ctnetlink: netns support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_netlink.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index e2d13cd18875..aa8adf930b3c 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -3602,6 +3602,9 @@ static void __net_exit ctnetlink_net_exit_batch(struct list_head *net_exit_list)
 
 	list_for_each_entry(net, net_exit_list, exit_list)
 		ctnetlink_net_exit(net);
+
+	/* wait for other cpus until they are done with ctnl_notifiers */
+	synchronize_rcu();
 }
 
 static struct pernet_operations ctnetlink_net_ops = {
-- 
2.20.1

[PATCH AUTOSEL 5.4 015/187] x86/intel: Disable HPET on Intel Coffee Lake H platforms

[Sasha Levin]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit f8edbde885bbcab6a2b4a1b5ca614e6ccb807577 ]

Coffee Lake H SoC has similar behavior as Coffee Lake, skewed HPET timer
once the SoCs entered PC10.

So let's disable HPET on CFL-H platforms.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: feng.tang@intel.com
Cc: harry.pan@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20191129062303.18982-1-kai.heng.feng@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/early-quirks.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 4cba91ec8049..606711f5ebf8 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -710,6 +710,8 @@ static struct chipset early_qrk[] __initdata = {
 	 */
 	{ PCI_VENDOR_ID_INTEL, 0x0f00,
 		PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
+	{ PCI_VENDOR_ID_INTEL, 0x3e20,
+		PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
 	{ PCI_VENDOR_ID_INTEL, 0x3ec4,
 		PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
 	{ PCI_VENDOR_ID_BROADCOM, 0x4331,
-- 
2.20.1

[PATCH AUTOSEL 5.4 016/187] x86/intel: Disable HPET on Intel Ice Lake platforms

[Sasha Levin]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit e0748539e3d594dd26f0d27a270f14720b22a406 ]

Like CFL and CFL-H, ICL SoC has skewed HPET timer once it hits PC10.
So let's disable HPET on ICL.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: feng.tang@intel.com
Cc: harry.pan@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20191129062303.18982-2-kai.heng.feng@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/early-quirks.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 606711f5ebf8..2f9ec14be3b1 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -714,6 +714,8 @@ static struct chipset early_qrk[] __initdata = {
 		PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
 	{ PCI_VENDOR_ID_INTEL, 0x3ec4,
 		PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
+	{ PCI_VENDOR_ID_INTEL, 0x8a12,
+		PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
 	{ PCI_VENDOR_ID_BROADCOM, 0x4331,
 	  PCI_CLASS_NETWORK_OTHER, PCI_ANY_ID, 0, apple_airport_reset},
 	{}
-- 
2.20.1

[PATCH AUTOSEL 5.4 017/187] netfilter: nf_tables_offload: Check for the NETDEV_UNREGISTER event

[Sasha Levin]

From: wenxu <wenxu@ucloud.cn>

[ Upstream commit d1f4c966475c6dd2545c6625022cb24e878bee11 ]

Check for the NETDEV_UNREGISTER event from the nft_offload_netdev_event
function, which is the event that actually triggers the clean up.

Fixes: 06d392cbe3db ("netfilter: nf_tables_offload: remove rules when the device unregisters")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_offload.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/netfilter/nf_tables_offload.c b/net/netfilter/nf_tables_offload.c
index 5f6037695dee..6f7eab502e65 100644
--- a/net/netfilter/nf_tables_offload.c
+++ b/net/netfilter/nf_tables_offload.c
@@ -446,6 +446,9 @@ static int nft_offload_netdev_event(struct notifier_block *this,
 	struct net *net = dev_net(dev);
 	struct nft_chain *chain;
 
+	if (event != NETDEV_UNREGISTER)
+		return NOTIFY_DONE;
+
 	mutex_lock(&net->nft.commit_mutex);
 	chain = __nft_offload_get_chain(dev);
 	if (chain)
-- 
2.20.1

[PATCH AUTOSEL 5.4 018/187] mwifiex: Fix heap overflow in mmwifiex_process_tdls_action_frame()

[Sasha Levin]

From: qize wang <wangqize888888888@gmail.com>

[ Upstream commit 1e58252e334dc3f3756f424a157d1b7484464c40 ]

mwifiex_process_tdls_action_frame() without checking
the incoming tdls infomation element's vality before use it,
this may cause multi heap buffer overflows.

Fix them by putting vality check before use it.

IE is TLV struct, but ht_cap and  ht_oper aren’t TLV struct.
the origin marvell driver code is wrong:

memcpy(&sta_ptr->tdls_cap.ht_oper, pos,....
memcpy((u8 *)&sta_ptr->tdls_cap.ht_capb, pos,...

Fix the bug by changing pos(the address of IE) to
pos+2 ( the address of IE value ).

Signed-off-by: qize wang <wangqize888888888@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/tdls.c | 70 +++++++++++++++++++--
 1 file changed, 64 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/tdls.c b/drivers/net/wireless/marvell/mwifiex/tdls.c
index 09313047beed..7caf1d26124a 100644
--- a/drivers/net/wireless/marvell/mwifiex/tdls.c
+++ b/drivers/net/wireless/marvell/mwifiex/tdls.c
@@ -953,59 +953,117 @@ void mwifiex_process_tdls_action_frame(struct mwifiex_private *priv,
 
 		switch (*pos) {
 		case WLAN_EID_SUPP_RATES:
+			if (pos[1] > 32)
+				return;
 			sta_ptr->tdls_cap.rates_len = pos[1];
 			for (i = 0; i < pos[1]; i++)
 				sta_ptr->tdls_cap.rates[i] = pos[i + 2];
 			break;
 
 		case WLAN_EID_EXT_SUPP_RATES:
+			if (pos[1] > 32)
+				return;
 			basic = sta_ptr->tdls_cap.rates_len;
+			if (pos[1] > 32 - basic)
+				return;
 			for (i = 0; i < pos[1]; i++)
 				sta_ptr->tdls_cap.rates[basic + i] = pos[i + 2];
 			sta_ptr->tdls_cap.rates_len += pos[1];
 			break;
 		case WLAN_EID_HT_CAPABILITY:
-			memcpy((u8 *)&sta_ptr->tdls_cap.ht_capb, pos,
+			if (pos > end - sizeof(struct ieee80211_ht_cap) - 2)
+				return;
+			if (pos[1] != sizeof(struct ieee80211_ht_cap))
+				return;
+			/* copy the ie's value into ht_capb*/
+			memcpy((u8 *)&sta_ptr->tdls_cap.ht_capb, pos + 2,
 			       sizeof(struct ieee80211_ht_cap));
 			sta_ptr->is_11n_enabled = 1;
 			break;
 		case WLAN_EID_HT_OPERATION:
-			memcpy(&sta_ptr->tdls_cap.ht_oper, pos,
+			if (pos > end -
+			    sizeof(struct ieee80211_ht_operation) - 2)
+				return;
+			if (pos[1] != sizeof(struct ieee80211_ht_operation))
+				return;
+			/* copy the ie's value into ht_oper*/
+			memcpy(&sta_ptr->tdls_cap.ht_oper, pos + 2,
 			       sizeof(struct ieee80211_ht_operation));
 			break;
 		case WLAN_EID_BSS_COEX_2040:
+			if (pos > end - 3)
+				return;
+			if (pos[1] != 1)
+				return;
 			sta_ptr->tdls_cap.coex_2040 = pos[2];
 			break;
 		case WLAN_EID_EXT_CAPABILITY:
+			if (pos > end - sizeof(struct ieee_types_header))
+				return;
+			if (pos[1] < sizeof(struct ieee_types_header))
+				return;
+			if (pos[1] > 8)
+				return;
 			memcpy((u8 *)&sta_ptr->tdls_cap.extcap, pos,
 			       sizeof(struct ieee_types_header) +
 			       min_t(u8, pos[1], 8));
 			break;
 		case WLAN_EID_RSN:
+			if (pos > end - sizeof(struct ieee_types_header))
+				return;
+			if (pos[1] < sizeof(struct ieee_types_header))
+				return;
+			if (pos[1] > IEEE_MAX_IE_SIZE -
+			    sizeof(struct ieee_types_header))
+				return;
 			memcpy((u8 *)&sta_ptr->tdls_cap.rsn_ie, pos,
 			       sizeof(struct ieee_types_header) +
 			       min_t(u8, pos[1], IEEE_MAX_IE_SIZE -
 				     sizeof(struct ieee_types_header)));
 			break;
 		case WLAN_EID_QOS_CAPA:
+			if (pos > end - 3)
+				return;
+			if (pos[1] != 1)
+				return;
 			sta_ptr->tdls_cap.qos_info = pos[2];
 			break;
 		case WLAN_EID_VHT_OPERATION:
-			if (priv->adapter->is_hw_11ac_capable)
-				memcpy(&sta_ptr->tdls_cap.vhtoper, pos,
+			if (priv->adapter->is_hw_11ac_capable) {
+				if (pos > end -
+				    sizeof(struct ieee80211_vht_operation) - 2)
+					return;
+				if (pos[1] !=
+				    sizeof(struct ieee80211_vht_operation))
+					return;
+				/* copy the ie's value into vhtoper*/
+				memcpy(&sta_ptr->tdls_cap.vhtoper, pos + 2,
 				       sizeof(struct ieee80211_vht_operation));
+			}
 			break;
 		case WLAN_EID_VHT_CAPABILITY:
 			if (priv->adapter->is_hw_11ac_capable) {
-				memcpy((u8 *)&sta_ptr->tdls_cap.vhtcap, pos,
+				if (pos > end -
+				    sizeof(struct ieee80211_vht_cap) - 2)
+					return;
+				if (pos[1] != sizeof(struct ieee80211_vht_cap))
+					return;
+				/* copy the ie's value into vhtcap*/
+				memcpy((u8 *)&sta_ptr->tdls_cap.vhtcap, pos + 2,
 				       sizeof(struct ieee80211_vht_cap));
 				sta_ptr->is_11ac_enabled = 1;
 			}
 			break;
 		case WLAN_EID_AID:
-			if (priv->adapter->is_hw_11ac_capable)
+			if (priv->adapter->is_hw_11ac_capable) {
+				if (pos > end - 4)
+					return;
+				if (pos[1] != 2)
+					return;
 				sta_ptr->tdls_cap.aid =
 					get_unaligned_le16((pos + 2));
+			}
+			break;
 		default:
 			break;
 		}
-- 
2.20.1

[PATCH AUTOSEL 5.4 019/187] libtraceevent: Fix lib installation with O=

[Sasha Levin]

From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>

[ Upstream commit 587db8ebdac2c5eb3a8851e16b26f2e2711ab797 ]

When we use 'O=' with make to build libtraceevent in a separate folder
it fails to install libtraceevent.a and libtraceevent.so.1.1.0 with the
error:

  INSTALL  /home/sudip/linux/obj-trace/libtraceevent.a
  INSTALL  /home/sudip/linux/obj-trace/libtraceevent.so.1.1.0

  cp: cannot stat 'libtraceevent.a': No such file or directory
  Makefile:225: recipe for target 'install_lib' failed
  make: *** [install_lib] Error 1

I used the command:

  make O=../../../obj-trace DESTDIR=~/test prefix==/usr  install

It turns out libtraceevent Makefile, even though it builds in a separate
folder, searches for libtraceevent.a and libtraceevent.so.1.1.0 in its
source folder.

So, add the 'OUTPUT' prefix to the source path so that 'make' looks for
the files in the correct place.

Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191115113610.21493-1-sudipm.mukherjee@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/traceevent/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/lib/traceevent/Makefile b/tools/lib/traceevent/Makefile
index 5315f3787f8d..d008e64042ce 100644
--- a/tools/lib/traceevent/Makefile
+++ b/tools/lib/traceevent/Makefile
@@ -97,6 +97,7 @@ EVENT_PARSE_VERSION = $(EP_VERSION).$(EP_PATCHLEVEL).$(EP_EXTRAVERSION)
 
 LIB_TARGET  = libtraceevent.a libtraceevent.so.$(EVENT_PARSE_VERSION)
 LIB_INSTALL = libtraceevent.a libtraceevent.so*
+LIB_INSTALL := $(addprefix $(OUTPUT),$(LIB_INSTALL))
 
 INCLUDES = -I. -I $(srctree)/tools/include $(CONFIG_INCLUDES)
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 020/187] libtraceevent: Copy pkg-config file to output folder when using O=

[Sasha Levin]

From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>

[ Upstream commit 15b3904f8e884e0d34d5f09906cf6526d0b889a2 ]

When we use 'O=' with make to build libtraceevent in a separate folder
it still copies 'libtraceevent.pc' to its source folder. Modify the
Makefile so that it uses the output folder to copy the pkg-config file
and install from there.

Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191115113610.21493-2-sudipm.mukherjee@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/traceevent/Makefile | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/tools/lib/traceevent/Makefile b/tools/lib/traceevent/Makefile
index d008e64042ce..ecf882308d8a 100644
--- a/tools/lib/traceevent/Makefile
+++ b/tools/lib/traceevent/Makefile
@@ -208,10 +208,11 @@ define do_install
 	$(INSTALL) $(if $3,-m $3,) $1 '$(DESTDIR_SQ)$2'
 endef
 
-PKG_CONFIG_FILE = libtraceevent.pc
+PKG_CONFIG_SOURCE_FILE = libtraceevent.pc
+PKG_CONFIG_FILE := $(addprefix $(OUTPUT),$(PKG_CONFIG_SOURCE_FILE))
 define do_install_pkgconfig_file
 	if [ -n "${pkgconfig_dir}" ]; then 					\
-		cp -f ${PKG_CONFIG_FILE}.template ${PKG_CONFIG_FILE}; 		\
+		cp -f ${PKG_CONFIG_SOURCE_FILE}.template ${PKG_CONFIG_FILE};	\
 		sed -i "s|INSTALL_PREFIX|${1}|g" ${PKG_CONFIG_FILE}; 		\
 		sed -i "s|LIB_VERSION|${EVENT_PARSE_VERSION}|g" ${PKG_CONFIG_FILE}; \
 		sed -i "s|LIB_DIR|${libdir}|g" ${PKG_CONFIG_FILE}; \
-- 
2.20.1

[PATCH AUTOSEL 5.4 021/187] regulator: core: fix regulator_register() error paths to properly release rdev

[Sasha Levin]

From: Wen Yang <wenyang@linux.alibaba.com>

[ Upstream commit a3cde9534ebdafe18a9bbab208df724c57e6c8e8 ]

There are several issues with the error handling code of
the regulator_register() function:
        ret = device_register(&rdev->dev);
        if (ret != 0) {
                put_device(&rdev->dev); --> rdev released
                goto unset_supplies;
        }
...
unset_supplies:
...
        unset_regulator_supplies(rdev); --> use-after-free
...
clean:
        if (dangling_of_gpiod)
                gpiod_put(config->ena_gpiod);
        kfree(rdev);                     --> double free

We add a variable to record the failure of device_register() and
move put_device() down a bit to avoid the above issues.

Fixes: c438b9d01736 ("regulator: core: Move registration of regulator device")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20191201030250.38074-1-wenyang@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/core.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 71c1467e1e2e..8f5c028090e9 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -4990,6 +4990,7 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	struct regulator_dev *rdev;
 	bool dangling_cfg_gpiod = false;
 	bool dangling_of_gpiod = false;
+	bool reg_device_fail = false;
 	struct device *dev;
 	int ret, i;
 
@@ -5175,7 +5176,7 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	dev_set_drvdata(&rdev->dev, rdev);
 	ret = device_register(&rdev->dev);
 	if (ret != 0) {
-		put_device(&rdev->dev);
+		reg_device_fail = true;
 		goto unset_supplies;
 	}
 
@@ -5205,7 +5206,10 @@ regulator_register(const struct regulator_desc *regulator_desc,
 clean:
 	if (dangling_of_gpiod)
 		gpiod_put(config->ena_gpiod);
-	kfree(rdev);
+	if (reg_device_fail)
+		put_device(&rdev->dev);
+	else
+		kfree(rdev);
 	kfree(config);
 rinse:
 	if (dangling_cfg_gpiod)
-- 
2.20.1

[PATCH AUTOSEL 5.4 022/187] x86/efi: Update e820 with reserved EFI boot services data to fix kexec breakage

[Sasha Levin]

From: Dave Young <dyoung@redhat.com>

[ Upstream commit af164898482817a1d487964b68f3c21bae7a1beb ]

Michael Weiser reported that he got this error during a kexec rebooting:

  esrt: Unsupported ESRT version 2904149718861218184.

The ESRT memory stays in EFI boot services data, and it was reserved
in kernel via efi_mem_reserve().  The initial purpose of the reservation
is to reuse the EFI boot services data across kexec reboot. For example
the BGRT image data and some ESRT memory like Michael reported.

But although the memory is reserved it is not updated in the X86 E820 table,
and kexec_file_load() iterates system RAM in the IO resource list to find places
for kernel, initramfs and other stuff. In Michael's case the kexec loaded
initramfs overwrote the ESRT memory and then the failure happened.

Since kexec_file_load() depends on the E820 table being updated, just fix this
by updating the reserved EFI boot services memory as reserved type in E820.

Originally any memory descriptors with EFI_MEMORY_RUNTIME attribute are
bypassed in the reservation code path because they are assumed as reserved.

But the reservation is still needed for multiple kexec reboots,
and it is the only possible case we come here thus just drop the code
chunk, then everything works without side effects.

On my machine the ESRT memory sits in an EFI runtime data range, it does
not trigger the problem, but I successfully tested with BGRT instead.
both kexec_load() and kexec_file_load() work and kdump works as well.

[ mingo: Edited the changelog. ]

Reported-by: Michael Weiser <michael@weiser.dinsnail.net>
Tested-by: Michael Weiser <michael@weiser.dinsnail.net>
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kexec@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191204075233.GA10520@dhcp-128-65.nay.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/platform/efi/quirks.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c
index 3b9fd679cea9..aefe845dff59 100644
--- a/arch/x86/platform/efi/quirks.c
+++ b/arch/x86/platform/efi/quirks.c
@@ -260,10 +260,6 @@ void __init efi_arch_mem_reserve(phys_addr_t addr, u64 size)
 		return;
 	}
 
-	/* No need to reserve regions that will never be freed. */
-	if (md.attribute & EFI_MEMORY_RUNTIME)
-		return;
-
 	size += addr % EFI_PAGE_SIZE;
 	size = round_up(size, EFI_PAGE_SIZE);
 	addr = round_down(addr, EFI_PAGE_SIZE);
@@ -293,6 +289,8 @@ void __init efi_arch_mem_reserve(phys_addr_t addr, u64 size)
 	early_memunmap(new, new_size);
 
 	efi_memmap_install(new_phys, num_entries);
+	e820__range_update(addr, size, E820_TYPE_RAM, E820_TYPE_RESERVED);
+	e820__update_table(e820_table);
 }
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 5.4 022/187] x86/efi: Update e820 with reserved EFI boot services data to fix kexec breakage

[Sasha Levin]

From: Dave Young <dyoung-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

[ Upstream commit af164898482817a1d487964b68f3c21bae7a1beb ]

Michael Weiser reported that he got this error during a kexec rebooting:

  esrt: Unsupported ESRT version 2904149718861218184.

The ESRT memory stays in EFI boot services data, and it was reserved
in kernel via efi_mem_reserve().  The initial purpose of the reservation
is to reuse the EFI boot services data across kexec reboot. For example
the BGRT image data and some ESRT memory like Michael reported.

But although the memory is reserved it is not updated in the X86 E820 table,
and kexec_file_load() iterates system RAM in the IO resource list to find places
for kernel, initramfs and other stuff. In Michael's case the kexec loaded
initramfs overwrote the ESRT memory and then the failure happened.

Since kexec_file_load() depends on the E820 table being updated, just fix this
by updating the reserved EFI boot services memory as reserved type in E820.

Originally any memory descriptors with EFI_MEMORY_RUNTIME attribute are
bypassed in the reservation code path because they are assumed as reserved.

But the reservation is still needed for multiple kexec reboots,
and it is the only possible case we come here thus just drop the code
chunk, then everything works without side effects.

On my machine the ESRT memory sits in an EFI runtime data range, it does
not trigger the problem, but I successfully tested with BGRT instead.
both kexec_load() and kexec_file_load() work and kdump works as well.

[ mingo: Edited the changelog. ]

Reported-by: Michael Weiser <michael-kvmrdUZdB1uagOi/AmBnLNHuzzzSOjJt@public.gmane.org>
Tested-by: Michael Weiser <michael-kvmrdUZdB1uagOi/AmBnLNHuzzzSOjJt@public.gmane.org>
Signed-off-by: Dave Young <dyoung-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: Ard Biesheuvel <ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Borislav Petkov <bp-Gina5bIWoIWzQB+pC5nmwQ@public.gmane.org>
Cc: Eric W. Biederman <ebiederm-aS9lmoZGLiVWk0Htik3J/w@public.gmane.org>
Cc: H. Peter Anvin <hpa-YMNOUZJC4hwAvxtiuMwx3w@public.gmane.org>
Cc: Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
Cc: Peter Zijlstra <peterz-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
Cc: Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
Cc: kexec-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: linux-efi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Link: https://lkml.kernel.org/r/20191204075233.GA10520-0VdLhd/A9Pl+NNSt+8eSiB/sF2h8X+2i0E9HWUfgJXw@public.gmane.org
Signed-off-by: Ingo Molnar <mingo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 arch/x86/platform/efi/quirks.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c
index 3b9fd679cea9..aefe845dff59 100644
--- a/arch/x86/platform/efi/quirks.c
+++ b/arch/x86/platform/efi/quirks.c
@@ -260,10 +260,6 @@ void __init efi_arch_mem_reserve(phys_addr_t addr, u64 size)
 		return;
 	}
 
-	/* No need to reserve regions that will never be freed. */
-	if (md.attribute & EFI_MEMORY_RUNTIME)
-		return;
-
 	size += addr % EFI_PAGE_SIZE;
 	size = round_up(size, EFI_PAGE_SIZE);
 	addr = round_down(addr, EFI_PAGE_SIZE);
@@ -293,6 +289,8 @@ void __init efi_arch_mem_reserve(phys_addr_t addr, u64 size)
 	early_memunmap(new, new_size);
 
 	efi_memmap_install(new_phys, num_entries);
+	e820__range_update(addr, size, E820_TYPE_RAM, E820_TYPE_RESERVED);
+	e820__update_table(e820_table);
 }
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 5.4 022/187] x86/efi: Update e820 with reserved EFI boot services data to fix kexec breakage

[Sasha Levin]

From: Dave Young <dyoung@redhat.com>

[ Upstream commit af164898482817a1d487964b68f3c21bae7a1beb ]

Michael Weiser reported that he got this error during a kexec rebooting:

  esrt: Unsupported ESRT version 2904149718861218184.

The ESRT memory stays in EFI boot services data, and it was reserved
in kernel via efi_mem_reserve().  The initial purpose of the reservation
is to reuse the EFI boot services data across kexec reboot. For example
the BGRT image data and some ESRT memory like Michael reported.

But although the memory is reserved it is not updated in the X86 E820 table,
and kexec_file_load() iterates system RAM in the IO resource list to find places
for kernel, initramfs and other stuff. In Michael's case the kexec loaded
initramfs overwrote the ESRT memory and then the failure happened.

Since kexec_file_load() depends on the E820 table being updated, just fix this
by updating the reserved EFI boot services memory as reserved type in E820.

Originally any memory descriptors with EFI_MEMORY_RUNTIME attribute are
bypassed in the reservation code path because they are assumed as reserved.

But the reservation is still needed for multiple kexec reboots,
and it is the only possible case we come here thus just drop the code
chunk, then everything works without side effects.

On my machine the ESRT memory sits in an EFI runtime data range, it does
not trigger the problem, but I successfully tested with BGRT instead.
both kexec_load() and kexec_file_load() work and kdump works as well.

[ mingo: Edited the changelog. ]

Reported-by: Michael Weiser <michael@weiser.dinsnail.net>
Tested-by: Michael Weiser <michael@weiser.dinsnail.net>
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kexec@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191204075233.GA10520@dhcp-128-65.nay.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/platform/efi/quirks.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c
index 3b9fd679cea9..aefe845dff59 100644
--- a/arch/x86/platform/efi/quirks.c
+++ b/arch/x86/platform/efi/quirks.c
@@ -260,10 +260,6 @@ void __init efi_arch_mem_reserve(phys_addr_t addr, u64 size)
 		return;
 	}
 
-	/* No need to reserve regions that will never be freed. */
-	if (md.attribute & EFI_MEMORY_RUNTIME)
-		return;
-
 	size += addr % EFI_PAGE_SIZE;
 	size = round_up(size, EFI_PAGE_SIZE);
 	addr = round_down(addr, EFI_PAGE_SIZE);
@@ -293,6 +289,8 @@ void __init efi_arch_mem_reserve(phys_addr_t addr, u64 size)
 	early_memunmap(new, new_size);
 
 	efi_memmap_install(new_phys, num_entries);
+	e820__range_update(addr, size, E820_TYPE_RAM, E820_TYPE_RESERVED);
+	e820__update_table(e820_table);
 }
 
 /*
-- 
2.20.1


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH AUTOSEL 5.4 023/187] ASoC: Intel: bytcr_rt5640: Update quirk for Teclast X89

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 7eccc05c7101f34cc36afe9405d15de6d4099fb4 ]

When the Teclast X89 quirk was added we did not have jack-detection
support yet.

Note the over-current detection limit is set to 2mA instead of the usual
1.5mA because this tablet tends to give false-positive button-presses
when it is set to 1.5mA.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191203221442.2657-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 9c1aa4ec9cba..cb511ea3b771 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -705,13 +705,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_MCLK_EN),
 	},
 	{
+		/* Teclast X89 */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
 			DMI_MATCH(DMI_BOARD_NAME, "tPAD"),
 		},
 		.driver_data = (void *)(BYT_RT5640_IN3_MAP |
-					BYT_RT5640_MCLK_EN |
-					BYT_RT5640_SSP0_AIF1),
+					BYT_RT5640_JD_SRC_JD1_IN4P |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_1P0 |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
 	},
 	{	/* Toshiba Satellite Click Mini L9W-B */
 		.matches = {
-- 
2.20.1

[alsa-devel] [PATCH AUTOSEL 5.4 023/187] ASoC: Intel: bytcr_rt5640: Update quirk for Teclast X89

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 7eccc05c7101f34cc36afe9405d15de6d4099fb4 ]

When the Teclast X89 quirk was added we did not have jack-detection
support yet.

Note the over-current detection limit is set to 2mA instead of the usual
1.5mA because this tablet tends to give false-positive button-presses
when it is set to 1.5mA.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191203221442.2657-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 9c1aa4ec9cba..cb511ea3b771 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -705,13 +705,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_MCLK_EN),
 	},
 	{
+		/* Teclast X89 */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
 			DMI_MATCH(DMI_BOARD_NAME, "tPAD"),
 		},
 		.driver_data = (void *)(BYT_RT5640_IN3_MAP |
-					BYT_RT5640_MCLK_EN |
-					BYT_RT5640_SSP0_AIF1),
+					BYT_RT5640_JD_SRC_JD1_IN4P |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_1P0 |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
 	},
 	{	/* Toshiba Satellite Click Mini L9W-B */
 		.matches = {
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[PATCH AUTOSEL 5.4 024/187] selftests: netfilter: use randomized netns names

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 5a2e6af81807d4616f9839ad0ae7d1313b45c64d ]

Using ns0, ns1, etc. isn't a good idea, they might exist already.
Use a random suffix.

Also, older nft versions don't support "-" as alias for stdin, so
use /dev/stdin instead.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/netfilter/nft_nat.sh | 332 ++++++++++---------
 1 file changed, 176 insertions(+), 156 deletions(-)

diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
index 1be55e705780..d7e07f4c3d7f 100755
--- a/tools/testing/selftests/netfilter/nft_nat.sh
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -8,9 +8,14 @@ ksft_skip=4
 ret=0
 test_inet_nat=true
 
+sfx=$(mktemp -u "XXXXXXXX")
+ns0="ns0-$sfx"
+ns1="ns1-$sfx"
+ns2="ns2-$sfx"
+
 cleanup()
 {
-	for i in 0 1 2; do ip netns del ns$i;done
+	for i in 0 1 2; do ip netns del ns$i-"$sfx";done
 }
 
 nft --version > /dev/null 2>&1
@@ -25,40 +30,49 @@ if [ $? -ne 0 ];then
 	exit $ksft_skip
 fi
 
-ip netns add ns0
+ip netns add "$ns0"
 if [ $? -ne 0 ];then
-	echo "SKIP: Could not create net namespace"
+	echo "SKIP: Could not create net namespace $ns0"
 	exit $ksft_skip
 fi
 
 trap cleanup EXIT
 
-ip netns add ns1
-ip netns add ns2
+ip netns add "$ns1"
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not create net namespace $ns1"
+	exit $ksft_skip
+fi
+
+ip netns add "$ns2"
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not create net namespace $ns2"
+	exit $ksft_skip
+fi
 
-ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 > /dev/null 2>&1
+ip link add veth0 netns "$ns0" type veth peer name eth0 netns "$ns1" > /dev/null 2>&1
 if [ $? -ne 0 ];then
     echo "SKIP: No virtual ethernet pair device support in kernel"
     exit $ksft_skip
 fi
-ip link add veth1 netns ns0 type veth peer name eth0 netns ns2
+ip link add veth1 netns "$ns0" type veth peer name eth0 netns "$ns2"
 
-ip -net ns0 link set lo up
-ip -net ns0 link set veth0 up
-ip -net ns0 addr add 10.0.1.1/24 dev veth0
-ip -net ns0 addr add dead:1::1/64 dev veth0
+ip -net "$ns0" link set lo up
+ip -net "$ns0" link set veth0 up
+ip -net "$ns0" addr add 10.0.1.1/24 dev veth0
+ip -net "$ns0" addr add dead:1::1/64 dev veth0
 
-ip -net ns0 link set veth1 up
-ip -net ns0 addr add 10.0.2.1/24 dev veth1
-ip -net ns0 addr add dead:2::1/64 dev veth1
+ip -net "$ns0" link set veth1 up
+ip -net "$ns0" addr add 10.0.2.1/24 dev veth1
+ip -net "$ns0" addr add dead:2::1/64 dev veth1
 
 for i in 1 2; do
-  ip -net ns$i link set lo up
-  ip -net ns$i link set eth0 up
-  ip -net ns$i addr add 10.0.$i.99/24 dev eth0
-  ip -net ns$i route add default via 10.0.$i.1
-  ip -net ns$i addr add dead:$i::99/64 dev eth0
-  ip -net ns$i route add default via dead:$i::1
+  ip -net ns$i-$sfx link set lo up
+  ip -net ns$i-$sfx link set eth0 up
+  ip -net ns$i-$sfx addr add 10.0.$i.99/24 dev eth0
+  ip -net ns$i-$sfx route add default via 10.0.$i.1
+  ip -net ns$i-$sfx addr add dead:$i::99/64 dev eth0
+  ip -net ns$i-$sfx route add default via dead:$i::1
 done
 
 bad_counter()
@@ -66,8 +80,9 @@ bad_counter()
 	local ns=$1
 	local counter=$2
 	local expect=$3
+	local tag=$4
 
-	echo "ERROR: $counter counter in $ns has unexpected value (expected $expect)" 1>&2
+	echo "ERROR: $counter counter in $ns has unexpected value (expected $expect) at $tag" 1>&2
 	ip netns exec $ns nft list counter inet filter $counter 1>&2
 }
 
@@ -78,24 +93,24 @@ check_counters()
 
 	cnt=$(ip netns exec $ns nft list counter inet filter ns0in | grep -q "packets 1 bytes 84")
 	if [ $? -ne 0 ]; then
-		bad_counter $ns ns0in "packets 1 bytes 84"
+		bad_counter $ns ns0in "packets 1 bytes 84" "check_counters 1"
 		lret=1
 	fi
 	cnt=$(ip netns exec $ns nft list counter inet filter ns0out | grep -q "packets 1 bytes 84")
 	if [ $? -ne 0 ]; then
-		bad_counter $ns ns0out "packets 1 bytes 84"
+		bad_counter $ns ns0out "packets 1 bytes 84" "check_counters 2"
 		lret=1
 	fi
 
 	expect="packets 1 bytes 104"
 	cnt=$(ip netns exec $ns nft list counter inet filter ns0in6 | grep -q "$expect")
 	if [ $? -ne 0 ]; then
-		bad_counter $ns ns0in6 "$expect"
+		bad_counter $ns ns0in6 "$expect" "check_counters 3"
 		lret=1
 	fi
 	cnt=$(ip netns exec $ns nft list counter inet filter ns0out6 | grep -q "$expect")
 	if [ $? -ne 0 ]; then
-		bad_counter $ns ns0out6 "$expect"
+		bad_counter $ns ns0out6 "$expect" "check_counters 4"
 		lret=1
 	fi
 
@@ -107,41 +122,41 @@ check_ns0_counters()
 	local ns=$1
 	local lret=0
 
-	cnt=$(ip netns exec ns0 nft list counter inet filter ns0in | grep -q "packets 0 bytes 0")
+	cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0in | grep -q "packets 0 bytes 0")
 	if [ $? -ne 0 ]; then
-		bad_counter ns0 ns0in "packets 0 bytes 0"
+		bad_counter "$ns0" ns0in "packets 0 bytes 0" "check_ns0_counters 1"
 		lret=1
 	fi
 
-	cnt=$(ip netns exec ns0 nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0")
+	cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0")
 	if [ $? -ne 0 ]; then
-		bad_counter ns0 ns0in6 "packets 0 bytes 0"
+		bad_counter "$ns0" ns0in6 "packets 0 bytes 0"
 		lret=1
 	fi
 
-	cnt=$(ip netns exec ns0 nft list counter inet filter ns0out | grep -q "packets 0 bytes 0")
+	cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0out | grep -q "packets 0 bytes 0")
 	if [ $? -ne 0 ]; then
-		bad_counter ns0 ns0out "packets 0 bytes 0"
+		bad_counter "$ns0" ns0out "packets 0 bytes 0" "check_ns0_counters 2"
 		lret=1
 	fi
-	cnt=$(ip netns exec ns0 nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0")
+	cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0")
 	if [ $? -ne 0 ]; then
-		bad_counter ns0 ns0out6 "packets 0 bytes 0"
+		bad_counter "$ns0" ns0out6 "packets 0 bytes 0" "check_ns0_counters3 "
 		lret=1
 	fi
 
 	for dir in "in" "out" ; do
 		expect="packets 1 bytes 84"
-		cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ${ns}${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns0 $ns$dir "$expect"
+			bad_counter "$ns0" $ns$dir "$expect" "check_ns0_counters 4"
 			lret=1
 		fi
 
 		expect="packets 1 bytes 104"
-		cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir}6 | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ${ns}${dir}6 | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns0 $ns$dir6 "$expect"
+			bad_counter "$ns0" $ns$dir6 "$expect" "check_ns0_counters 5"
 			lret=1
 		fi
 	done
@@ -152,7 +167,7 @@ check_ns0_counters()
 reset_counters()
 {
 	for i in 0 1 2;do
-		ip netns exec ns$i nft reset counters inet > /dev/null
+		ip netns exec ns$i-$sfx nft reset counters inet > /dev/null
 	done
 }
 
@@ -166,7 +181,7 @@ test_local_dnat6()
 		IPF="ip6"
 	fi
 
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
 table $family nat {
 	chain output {
 		type nat hook output priority 0; policy accept;
@@ -180,7 +195,7 @@ EOF
 	fi
 
 	# ping netns1, expect rewrite to netns2
-	ip netns exec ns0 ping -q -c 1 dead:1::99 > /dev/null
+	ip netns exec "$ns0" ping -q -c 1 dead:1::99 > /dev/null
 	if [ $? -ne 0 ]; then
 		lret=1
 		echo "ERROR: ping6 failed"
@@ -189,18 +204,18 @@ EOF
 
 	expect="packets 0 bytes 0"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns0 ns1$dir "$expect"
+			bad_counter "$ns0" ns1$dir "$expect" "test_local_dnat6 1"
 			lret=1
 		fi
 	done
 
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns0 ns2$dir "$expect"
+			bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat6 2"
 			lret=1
 		fi
 	done
@@ -208,9 +223,9 @@ EOF
 	# expect 0 count in ns1
 	expect="packets 0 bytes 0"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_local_dnat6 3"
 			lret=1
 		fi
 	done
@@ -218,15 +233,15 @@ EOF
 	# expect 1 packet in ns2
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns0$dir "$expect"
+			bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat6 4"
 			lret=1
 		fi
 	done
 
-	test $lret -eq 0 && echo "PASS: ipv6 ping to ns1 was $family NATted to ns2"
-	ip netns exec ns0 nft flush chain ip6 nat output
+	test $lret -eq 0 && echo "PASS: ipv6 ping to $ns1 was $family NATted to $ns2"
+	ip netns exec "$ns0" nft flush chain ip6 nat output
 
 	return $lret
 }
@@ -241,7 +256,7 @@ test_local_dnat()
 		IPF="ip"
 	fi
 
-ip netns exec ns0 nft -f - <<EOF 2>/dev/null
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF 2>/dev/null
 table $family nat {
 	chain output {
 		type nat hook output priority 0; policy accept;
@@ -260,7 +275,7 @@ EOF
 	fi
 
 	# ping netns1, expect rewrite to netns2
-	ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null
+	ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null
 	if [ $? -ne 0 ]; then
 		lret=1
 		echo "ERROR: ping failed"
@@ -269,18 +284,18 @@ EOF
 
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns0 ns1$dir "$expect"
+			bad_counter "$ns0" ns1$dir "$expect" "test_local_dnat 1"
 			lret=1
 		fi
 	done
 
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns0 ns2$dir "$expect"
+			bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat 2"
 			lret=1
 		fi
 	done
@@ -288,9 +303,9 @@ EOF
 	# expect 0 count in ns1
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_local_dnat 3"
 			lret=1
 		fi
 	done
@@ -298,19 +313,19 @@ EOF
 	# expect 1 packet in ns2
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns0$dir "$expect"
+			bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat 4"
 			lret=1
 		fi
 	done
 
-	test $lret -eq 0 && echo "PASS: ping to ns1 was $family NATted to ns2"
+	test $lret -eq 0 && echo "PASS: ping to $ns1 was $family NATted to $ns2"
 
-	ip netns exec ns0 nft flush chain $family nat output
+	ip netns exec "$ns0" nft flush chain $family nat output
 
 	reset_counters
-	ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null
+	ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null
 	if [ $? -ne 0 ]; then
 		lret=1
 		echo "ERROR: ping failed"
@@ -319,17 +334,17 @@ EOF
 
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns1$dir "$expect"
+			bad_counter "$ns1" ns1$dir "$expect" "test_local_dnat 5"
 			lret=1
 		fi
 	done
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns0 ns2$dir "$expect"
+			bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat 6"
 			lret=1
 		fi
 	done
@@ -337,9 +352,9 @@ EOF
 	# expect 1 count in ns1
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns0 ns0$dir "$expect"
+			bad_counter "$ns0" ns0$dir "$expect" "test_local_dnat 7"
 			lret=1
 		fi
 	done
@@ -347,14 +362,14 @@ EOF
 	# expect 0 packet in ns2
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns2$dir "$expect"
+			bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat 8"
 			lret=1
 		fi
 	done
 
-	test $lret -eq 0 && echo "PASS: ping to ns1 OK after $family nat output chain flush"
+	test $lret -eq 0 && echo "PASS: ping to $ns1 OK after $family nat output chain flush"
 
 	return $lret
 }
@@ -366,26 +381,26 @@ test_masquerade6()
 	local natflags=$2
 	local lret=0
 
-	ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+	ip netns exec "$ns0" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
 
-	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2 via ipv6"
+		echo "ERROR: cannot ping $ns1 from $ns2 via ipv6"
 		return 1
 		lret=1
 	fi
 
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns2$dir "$expect"
+			bad_counter "$ns1" ns2$dir "$expect" "test_masquerade6 1"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns1$dir "$expect"
+			bad_counter "$ns2" ns1$dir "$expect" "test_masquerade6 2"
 			lret=1
 		fi
 	done
@@ -393,7 +408,7 @@ test_masquerade6()
 	reset_counters
 
 # add masquerading rule
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
 table $family nat {
 	chain postrouting {
 		type nat hook postrouting priority 0; policy accept;
@@ -406,24 +421,24 @@ EOF
 		return $ksft_skip
 	fi
 
-	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2 with active $family masquerade $natflags"
+		echo "ERROR: cannot ping $ns1 from $ns2 with active $family masquerade $natflags"
 		lret=1
 	fi
 
 	# ns1 should have seen packets from ns0, due to masquerade
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_masquerade6 3"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns1$dir "$expect"
+			bad_counter "$ns2" ns1$dir "$expect" "test_masquerade6 4"
 			lret=1
 		fi
 	done
@@ -431,32 +446,32 @@ EOF
 	# ns1 should not have seen packets from ns2, due to masquerade
 	expect="packets 0 bytes 0"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_masquerade6 5"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns1$dir "$expect"
+			bad_counter "$ns0" ns1$dir "$expect" "test_masquerade6 6"
 			lret=1
 		fi
 	done
 
-	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerade $natflags (attempt 2)"
+		echo "ERROR: cannot ping $ns1 from $ns2 with active ipv6 masquerade $natflags (attempt 2)"
 		lret=1
 	fi
 
-	ip netns exec ns0 nft flush chain $family nat postrouting
+	ip netns exec "$ns0" nft flush chain $family nat postrouting
 	if [ $? -ne 0 ]; then
 		echo "ERROR: Could not flush $family nat postrouting" 1>&2
 		lret=1
 	fi
 
-	test $lret -eq 0 && echo "PASS: $family IPv6 masquerade $natflags for ns2"
+	test $lret -eq 0 && echo "PASS: $family IPv6 masquerade $natflags for $ns2"
 
 	return $lret
 }
@@ -467,26 +482,26 @@ test_masquerade()
 	local natflags=$2
 	local lret=0
 
-	ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
-	ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+	ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+	ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
 
-	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2 $natflags"
+		echo "ERROR: cannot ping $ns1 from "$ns2" $natflags"
 		lret=1
 	fi
 
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns2$dir "$expect"
+			bad_counter "$ns1" ns2$dir "$expect" "test_masquerade 1"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns1$dir "$expect"
+			bad_counter "$ns2" ns1$dir "$expect" "test_masquerade 2"
 			lret=1
 		fi
 	done
@@ -494,7 +509,7 @@ test_masquerade()
 	reset_counters
 
 # add masquerading rule
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
 table $family nat {
 	chain postrouting {
 		type nat hook postrouting priority 0; policy accept;
@@ -507,24 +522,24 @@ EOF
 		return $ksft_skip
 	fi
 
-	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2 with active $family masquerade $natflags"
+		echo "ERROR: cannot ping $ns1 from $ns2 with active $family masquerade $natflags"
 		lret=1
 	fi
 
 	# ns1 should have seen packets from ns0, due to masquerade
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_masquerade 3"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns1$dir "$expect"
+			bad_counter "$ns2" ns1$dir "$expect" "test_masquerade 4"
 			lret=1
 		fi
 	done
@@ -532,32 +547,32 @@ EOF
 	# ns1 should not have seen packets from ns2, due to masquerade
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_masquerade 5"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns1$dir "$expect"
+			bad_counter "$ns0" ns1$dir "$expect" "test_masquerade 6"
 			lret=1
 		fi
 	done
 
-	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2 with active ip masquerade $natflags (attempt 2)"
+		echo "ERROR: cannot ping $ns1 from $ns2 with active ip masquerade $natflags (attempt 2)"
 		lret=1
 	fi
 
-	ip netns exec ns0 nft flush chain $family nat postrouting
+	ip netns exec "$ns0" nft flush chain $family nat postrouting
 	if [ $? -ne 0 ]; then
 		echo "ERROR: Could not flush $family nat postrouting" 1>&2
 		lret=1
 	fi
 
-	test $lret -eq 0 && echo "PASS: $family IP masquerade $natflags for ns2"
+	test $lret -eq 0 && echo "PASS: $family IP masquerade $natflags for $ns2"
 
 	return $lret
 }
@@ -567,25 +582,25 @@ test_redirect6()
 	local family=$1
 	local lret=0
 
-	ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+	ip netns exec "$ns0" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
 
-	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannnot ping ns1 from ns2 via ipv6"
+		echo "ERROR: cannnot ping $ns1 from $ns2 via ipv6"
 		lret=1
 	fi
 
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns2$dir "$expect"
+			bad_counter "$ns1" ns2$dir "$expect" "test_redirect6 1"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns1$dir "$expect"
+			bad_counter "$ns2" ns1$dir "$expect" "test_redirect6 2"
 			lret=1
 		fi
 	done
@@ -593,7 +608,7 @@ test_redirect6()
 	reset_counters
 
 # add redirect rule
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
 table $family nat {
 	chain prerouting {
 		type nat hook prerouting priority 0; policy accept;
@@ -606,18 +621,18 @@ EOF
 		return $ksft_skip
 	fi
 
-	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2 via ipv6 with active $family redirect"
+		echo "ERROR: cannot ping $ns1 from $ns2 via ipv6 with active $family redirect"
 		lret=1
 	fi
 
 	# ns1 should have seen no packets from ns2, due to redirection
 	expect="packets 0 bytes 0"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_redirect6 3"
 			lret=1
 		fi
 	done
@@ -625,20 +640,20 @@ EOF
 	# ns0 should have seen packets from ns2, due to masquerade
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_redirect6 4"
 			lret=1
 		fi
 	done
 
-	ip netns exec ns0 nft delete table $family nat
+	ip netns exec "$ns0" nft delete table $family nat
 	if [ $? -ne 0 ]; then
 		echo "ERROR: Could not delete $family nat table" 1>&2
 		lret=1
 	fi
 
-	test $lret -eq 0 && echo "PASS: $family IPv6 redirection for ns2"
+	test $lret -eq 0 && echo "PASS: $family IPv6 redirection for $ns2"
 
 	return $lret
 }
@@ -648,26 +663,26 @@ test_redirect()
 	local family=$1
 	local lret=0
 
-	ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
-	ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+	ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+	ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
 
-	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2"
+		echo "ERROR: cannot ping $ns1 from $ns2"
 		lret=1
 	fi
 
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns2$dir "$expect"
+			bad_counter "$ns1" $ns2$dir "$expect" "test_redirect 1"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns1$dir "$expect"
+			bad_counter "$ns2" ns1$dir "$expect" "test_redirect 2"
 			lret=1
 		fi
 	done
@@ -675,7 +690,7 @@ test_redirect()
 	reset_counters
 
 # add redirect rule
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
 table $family nat {
 	chain prerouting {
 		type nat hook prerouting priority 0; policy accept;
@@ -688,9 +703,9 @@ EOF
 		return $ksft_skip
 	fi
 
-	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2 with active $family ip redirect"
+		echo "ERROR: cannot ping $ns1 from $ns2 with active $family ip redirect"
 		lret=1
 	fi
 
@@ -698,9 +713,9 @@ EOF
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
 
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_redirect 3"
 			lret=1
 		fi
 	done
@@ -708,28 +723,28 @@ EOF
 	# ns0 should have seen packets from ns2, due to masquerade
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns0" ns0$dir "$expect" "test_redirect 4"
 			lret=1
 		fi
 	done
 
-	ip netns exec ns0 nft delete table $family nat
+	ip netns exec "$ns0" nft delete table $family nat
 	if [ $? -ne 0 ]; then
 		echo "ERROR: Could not delete $family nat table" 1>&2
 		lret=1
 	fi
 
-	test $lret -eq 0 && echo "PASS: $family IP redirection for ns2"
+	test $lret -eq 0 && echo "PASS: $family IP redirection for $ns2"
 
 	return $lret
 }
 
 
-# ip netns exec ns0 ping -c 1 -q 10.0.$i.99
+# ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99
 for i in 0 1 2; do
-ip netns exec ns$i nft -f - <<EOF
+ip netns exec ns$i-$sfx nft -f /dev/stdin <<EOF
 table inet filter {
 	counter ns0in {}
 	counter ns1in {}
@@ -796,18 +811,18 @@ done
 sleep 3
 # test basic connectivity
 for i in 1 2; do
-  ip netns exec ns0 ping -c 1 -q 10.0.$i.99 > /dev/null
+  ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99 > /dev/null
   if [ $? -ne 0 ];then
   	echo "ERROR: Could not reach other namespace(s)" 1>&2
 	ret=1
   fi
 
-  ip netns exec ns0 ping -c 1 -q dead:$i::99 > /dev/null
+  ip netns exec "$ns0" ping -c 1 -q dead:$i::99 > /dev/null
   if [ $? -ne 0 ];then
 	echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2
 	ret=1
   fi
-  check_counters ns$i
+  check_counters ns$i-$sfx
   if [ $? -ne 0 ]; then
 	ret=1
   fi
@@ -820,7 +835,7 @@ for i in 1 2; do
 done
 
 if [ $ret -eq 0 ];then
-	echo "PASS: netns routing/connectivity: ns0 can reach ns1 and ns2"
+	echo "PASS: netns routing/connectivity: $ns0 can reach $ns1 and $ns2"
 fi
 
 reset_counters
@@ -846,4 +861,9 @@ reset_counters
 $test_inet_nat && test_redirect inet
 $test_inet_nat && test_redirect6 inet
 
+if [ $ret -ne 0 ];then
+	echo -n "FAIL: "
+	nft --version
+fi
+
 exit $ret
-- 
2.20.1

[PATCH AUTOSEL 5.4 025/187] netfilter: nf_queue: enqueue skbs with NULL dst

[Sasha Levin]

From: Marco Oliverio <marco.oliverio@tanaza.com>

[ Upstream commit 0b9173f4688dfa7c5d723426be1d979c24ce3d51 ]

Bridge packets that are forwarded have skb->dst == NULL and get
dropped by the check introduced by
b60a77386b1d4868f72f6353d35dabe5fbe981f2 (net: make skb_dst_force
return true when dst is refcounted).

To fix this we check skb_dst() before skb_dst_force(), so we don't
drop skb packet with dst == NULL. This holds also for skb at the
PRE_ROUTING hook so we remove the second check.

Fixes: b60a77386b1d ("net: make skb_dst_force return true when dst is refcounted")
Signed-off-by: Marco Oliverio <marco.oliverio@tanaza.com>
Signed-off-by: Rocco Folino <rocco.folino@tanaza.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_queue.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
index a2b58de82600..f8f52ff99cfb 100644
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -189,7 +189,7 @@ static int __nf_queue(struct sk_buff *skb, const struct nf_hook_state *state,
 		goto err;
 	}
 
-	if (!skb_dst_force(skb) && state->hook != NF_INET_PRE_ROUTING) {
+	if (skb_dst(skb) && !skb_dst_force(skb)) {
 		status = -ENETDOWN;
 		goto err;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.4 026/187] efi/gop: Return EFI_NOT_FOUND if there are no usable GOPs

[Sasha Levin]

From: Arvind Sankar <nivedita@alum.mit.edu>

[ Upstream commit 6fc3cec30dfeee7d3c5db8154016aff9d65503c5 ]

If we don't find a usable instance of the Graphics Output Protocol
(GOP) because none of them have a framebuffer (i.e. they were all
PIXEL_BLT_ONLY), but all the EFI calls succeeded, we will return
EFI_SUCCESS even though we didn't find a usable GOP.

Fix this by explicitly returning EFI_NOT_FOUND if no usable GOPs are
found, allowing the caller to probe for UGA instead.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-3-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/libstub/gop.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/firmware/efi/libstub/gop.c b/drivers/firmware/efi/libstub/gop.c
index 0101ca4c13b1..08f3c1a2fb48 100644
--- a/drivers/firmware/efi/libstub/gop.c
+++ b/drivers/firmware/efi/libstub/gop.c
@@ -119,7 +119,7 @@ setup_gop32(efi_system_table_t *sys_table_arg, struct screen_info *si,
 	u64 fb_base;
 	struct efi_pixel_bitmask pixel_info;
 	int pixel_format;
-	efi_status_t status = EFI_NOT_FOUND;
+	efi_status_t status;
 	u32 *handles = (u32 *)(unsigned long)gop_handle;
 	int i;
 
@@ -175,7 +175,7 @@ setup_gop32(efi_system_table_t *sys_table_arg, struct screen_info *si,
 
 	/* Did we find any GOPs? */
 	if (!first_gop)
-		goto out;
+		return EFI_NOT_FOUND;
 
 	/* EFI framebuffer */
 	si->orig_video_isVGA = VIDEO_TYPE_EFI;
@@ -197,7 +197,7 @@ setup_gop32(efi_system_table_t *sys_table_arg, struct screen_info *si,
 	si->lfb_size = si->lfb_linelength * si->lfb_height;
 
 	si->capabilities |= VIDEO_CAPABILITY_SKIP_QUIRKS;
-out:
+
 	return status;
 }
 
@@ -237,7 +237,7 @@ setup_gop64(efi_system_table_t *sys_table_arg, struct screen_info *si,
 	u64 fb_base;
 	struct efi_pixel_bitmask pixel_info;
 	int pixel_format;
-	efi_status_t status = EFI_NOT_FOUND;
+	efi_status_t status;
 	u64 *handles = (u64 *)(unsigned long)gop_handle;
 	int i;
 
@@ -293,7 +293,7 @@ setup_gop64(efi_system_table_t *sys_table_arg, struct screen_info *si,
 
 	/* Did we find any GOPs? */
 	if (!first_gop)
-		goto out;
+		return EFI_NOT_FOUND;
 
 	/* EFI framebuffer */
 	si->orig_video_isVGA = VIDEO_TYPE_EFI;
@@ -315,7 +315,7 @@ setup_gop64(efi_system_table_t *sys_table_arg, struct screen_info *si,
 	si->lfb_size = si->lfb_linelength * si->lfb_height;
 
 	si->capabilities |= VIDEO_CAPABILITY_SKIP_QUIRKS;
-out:
+
 	return status;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 027/187] efi/gop: Return EFI_SUCCESS if a usable GOP was found

[Sasha Levin]

From: Arvind Sankar <nivedita@alum.mit.edu>

[ Upstream commit dbd89c303b4420f6cdb689fd398349fc83b059dd ]

If we've found a usable instance of the Graphics Output Protocol
(GOP) with a framebuffer, it is possible that one of the later EFI
calls fails while checking if any support console output. In this
case status may be an EFI error code even though we found a usable
GOP.

Fix this by explicitly return EFI_SUCCESS if a usable GOP has been
located.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-4-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/libstub/gop.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/efi/libstub/gop.c b/drivers/firmware/efi/libstub/gop.c
index 08f3c1a2fb48..69b2b019a1d0 100644
--- a/drivers/firmware/efi/libstub/gop.c
+++ b/drivers/firmware/efi/libstub/gop.c
@@ -198,7 +198,7 @@ setup_gop32(efi_system_table_t *sys_table_arg, struct screen_info *si,
 
 	si->capabilities |= VIDEO_CAPABILITY_SKIP_QUIRKS;
 
-	return status;
+	return EFI_SUCCESS;
 }
 
 static efi_status_t
@@ -316,7 +316,7 @@ setup_gop64(efi_system_table_t *sys_table_arg, struct screen_info *si,
 
 	si->capabilities |= VIDEO_CAPABILITY_SKIP_QUIRKS;
 
-	return status;
+	return EFI_SUCCESS;
 }
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 5.4 028/187] efi/gop: Fix memory leak in __gop_query32/64()

[Sasha Levin]

From: Arvind Sankar <nivedita@alum.mit.edu>

[ Upstream commit ff397be685e410a59c34b21ce0c55d4daa466bb7 ]

efi_graphics_output_protocol::query_mode() returns info in
callee-allocated memory which must be freed by the caller, which
we aren't doing.

We don't actually need to call query_mode() in order to obtain the
info for the current graphics mode, which is already there in
gop->mode->info, so just access it directly in the setup_gop32/64()
functions.

Also nothing uses the size of the info structure, so don't update the
passed-in size (which is the size of the gop_handle table in bytes)
unnecessarily.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-5-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/libstub/gop.c | 66 ++++++------------------------
 1 file changed, 12 insertions(+), 54 deletions(-)

diff --git a/drivers/firmware/efi/libstub/gop.c b/drivers/firmware/efi/libstub/gop.c
index 69b2b019a1d0..b7bf1e993b8b 100644
--- a/drivers/firmware/efi/libstub/gop.c
+++ b/drivers/firmware/efi/libstub/gop.c
@@ -83,30 +83,6 @@ setup_pixel_info(struct screen_info *si, u32 pixels_per_scan_line,
 	}
 }
 
-static efi_status_t
-__gop_query32(efi_system_table_t *sys_table_arg,
-	      struct efi_graphics_output_protocol_32 *gop32,
-	      struct efi_graphics_output_mode_info **info,
-	      unsigned long *size, u64 *fb_base)
-{
-	struct efi_graphics_output_protocol_mode_32 *mode;
-	efi_graphics_output_protocol_query_mode query_mode;
-	efi_status_t status;
-	unsigned long m;
-
-	m = gop32->mode;
-	mode = (struct efi_graphics_output_protocol_mode_32 *)m;
-	query_mode = (void *)(unsigned long)gop32->query_mode;
-
-	status = __efi_call_early(query_mode, (void *)gop32, mode->mode, size,
-				  info);
-	if (status != EFI_SUCCESS)
-		return status;
-
-	*fb_base = mode->frame_buffer_base;
-	return status;
-}
-
 static efi_status_t
 setup_gop32(efi_system_table_t *sys_table_arg, struct screen_info *si,
             efi_guid_t *proto, unsigned long size, void **gop_handle)
@@ -128,6 +104,7 @@ setup_gop32(efi_system_table_t *sys_table_arg, struct screen_info *si,
 
 	nr_gops = size / sizeof(u32);
 	for (i = 0; i < nr_gops; i++) {
+		struct efi_graphics_output_protocol_mode_32 *mode;
 		struct efi_graphics_output_mode_info *info = NULL;
 		efi_guid_t conout_proto = EFI_CONSOLE_OUT_DEVICE_GUID;
 		bool conout_found = false;
@@ -145,9 +122,11 @@ setup_gop32(efi_system_table_t *sys_table_arg, struct screen_info *si,
 		if (status == EFI_SUCCESS)
 			conout_found = true;
 
-		status = __gop_query32(sys_table_arg, gop32, &info, &size,
-				       &current_fb_base);
-		if (status == EFI_SUCCESS && (!first_gop || conout_found) &&
+		mode = (void *)(unsigned long)gop32->mode;
+		info = (void *)(unsigned long)mode->info;
+		current_fb_base = mode->frame_buffer_base;
+
+		if ((!first_gop || conout_found) &&
 		    info->pixel_format != PIXEL_BLT_ONLY) {
 			/*
 			 * Systems that use the UEFI Console Splitter may
@@ -201,30 +180,6 @@ setup_gop32(efi_system_table_t *sys_table_arg, struct screen_info *si,
 	return EFI_SUCCESS;
 }
 
-static efi_status_t
-__gop_query64(efi_system_table_t *sys_table_arg,
-	      struct efi_graphics_output_protocol_64 *gop64,
-	      struct efi_graphics_output_mode_info **info,
-	      unsigned long *size, u64 *fb_base)
-{
-	struct efi_graphics_output_protocol_mode_64 *mode;
-	efi_graphics_output_protocol_query_mode query_mode;
-	efi_status_t status;
-	unsigned long m;
-
-	m = gop64->mode;
-	mode = (struct efi_graphics_output_protocol_mode_64 *)m;
-	query_mode = (void *)(unsigned long)gop64->query_mode;
-
-	status = __efi_call_early(query_mode, (void *)gop64, mode->mode, size,
-				  info);
-	if (status != EFI_SUCCESS)
-		return status;
-
-	*fb_base = mode->frame_buffer_base;
-	return status;
-}
-
 static efi_status_t
 setup_gop64(efi_system_table_t *sys_table_arg, struct screen_info *si,
 	    efi_guid_t *proto, unsigned long size, void **gop_handle)
@@ -246,6 +201,7 @@ setup_gop64(efi_system_table_t *sys_table_arg, struct screen_info *si,
 
 	nr_gops = size / sizeof(u64);
 	for (i = 0; i < nr_gops; i++) {
+		struct efi_graphics_output_protocol_mode_64 *mode;
 		struct efi_graphics_output_mode_info *info = NULL;
 		efi_guid_t conout_proto = EFI_CONSOLE_OUT_DEVICE_GUID;
 		bool conout_found = false;
@@ -263,9 +219,11 @@ setup_gop64(efi_system_table_t *sys_table_arg, struct screen_info *si,
 		if (status == EFI_SUCCESS)
 			conout_found = true;
 
-		status = __gop_query64(sys_table_arg, gop64, &info, &size,
-				       &current_fb_base);
-		if (status == EFI_SUCCESS && (!first_gop || conout_found) &&
+		mode = (void *)(unsigned long)gop64->mode;
+		info = (void *)(unsigned long)mode->info;
+		current_fb_base = mode->frame_buffer_base;
+
+		if ((!first_gop || conout_found) &&
 		    info->pixel_format != PIXEL_BLT_ONLY) {
 			/*
 			 * Systems that use the UEFI Console Splitter may
-- 
2.20.1

[PATCH AUTOSEL 5.4 029/187] efi/earlycon: Remap entire framebuffer after page initialization

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit b418d660bb9798d2249ac6a46c844389ef50b6a5 ]

When commit:

  69c1f396f25b ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation")

moved the x86 specific EFI earlyprintk implementation to a shared location,
it also tweaked the behaviour. In particular, it dropped a trick with full
framebuffer remapping after page initialization, leading to two regressions:

  1) very slow scrolling after page initialization,
  2) kernel hang when the 'keep_bootcon' command line argument is passed.

Putting the tweak back fixes #2 and mitigates #1, i.e., it limits the slow
behavior to the early boot stages, presumably due to eliminating heavy
map()/unmap() operations per each pixel line on the screen.

 [ ardb: ensure efifb is unmapped again unless keep_bootcon is in effect. ]
 [ mingo: speling fixes. ]

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Fixes: 69c1f396f25b ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation")
Link: https://lkml.kernel.org/r/20191206165542.31469-7-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/earlycon.c | 40 +++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/drivers/firmware/efi/earlycon.c b/drivers/firmware/efi/earlycon.c
index c9a0efca17b0..d4077db6dc97 100644
--- a/drivers/firmware/efi/earlycon.c
+++ b/drivers/firmware/efi/earlycon.c
@@ -13,18 +13,57 @@
 
 #include <asm/early_ioremap.h>
 
+static const struct console *earlycon_console __initdata;
 static const struct font_desc *font;
 static u32 efi_x, efi_y;
 static u64 fb_base;
 static pgprot_t fb_prot;
+static void *efi_fb;
+
+/*
+ * EFI earlycon needs to use early_memremap() to map the framebuffer.
+ * But early_memremap() is not usable for 'earlycon=efifb keep_bootcon',
+ * memremap() should be used instead. memremap() will be available after
+ * paging_init() which is earlier than initcall callbacks. Thus adding this
+ * early initcall function early_efi_map_fb() to map the whole EFI framebuffer.
+ */
+static int __init efi_earlycon_remap_fb(void)
+{
+	/* bail if there is no bootconsole or it has been disabled already */
+	if (!earlycon_console || !(earlycon_console->flags & CON_ENABLED))
+		return 0;
+
+	if (pgprot_val(fb_prot) == pgprot_val(PAGE_KERNEL))
+		efi_fb = memremap(fb_base, screen_info.lfb_size, MEMREMAP_WB);
+	else
+		efi_fb = memremap(fb_base, screen_info.lfb_size, MEMREMAP_WC);
+
+	return efi_fb ? 0 : -ENOMEM;
+}
+early_initcall(efi_earlycon_remap_fb);
+
+static int __init efi_earlycon_unmap_fb(void)
+{
+	/* unmap the bootconsole fb unless keep_bootcon has left it enabled */
+	if (efi_fb && !(earlycon_console->flags & CON_ENABLED))
+		memunmap(efi_fb);
+	return 0;
+}
+late_initcall(efi_earlycon_unmap_fb);
 
 static __ref void *efi_earlycon_map(unsigned long start, unsigned long len)
 {
+	if (efi_fb)
+		return efi_fb + start;
+
 	return early_memremap_prot(fb_base + start, len, pgprot_val(fb_prot));
 }
 
 static __ref void efi_earlycon_unmap(void *addr, unsigned long len)
 {
+	if (efi_fb)
+		return;
+
 	early_memunmap(addr, len);
 }
 
@@ -201,6 +240,7 @@ static int __init efi_earlycon_setup(struct earlycon_device *device,
 		efi_earlycon_scroll_up();
 
 	device->con->write = efi_earlycon_write;
+	earlycon_console = device->con;
 	return 0;
 }
 EARLYCON_DECLARE(efifb, efi_earlycon_setup);
-- 
2.20.1

[PATCH AUTOSEL 5.4 030/187] ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing

[Sasha Levin]

From: Stefan Roese <sr@denx.de>

[ Upstream commit 0aeb1f2b74f3402e9cdb7c0b8e2c369c9767301e ]

Without this "jedec,spi-nor" compatible property, probing of the SPI NOR
does not work on the NXP i.MX6ULL EVK. Fix this by adding this
compatible property to the DT.

Fixes: 7d77b8505aa9 ("ARM: dts: imx6ull: fix the imx6ull-14x14-evk configuration")
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index c2a9dd57e56a..aa86341adaaa 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -215,7 +215,7 @@
 	flash0: n25q256a@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "micron,n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
-- 
2.20.1

[PATCH AUTOSEL 5.4 030/187] ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing

[Sasha Levin]

From: Stefan Roese <sr@denx.de>

[ Upstream commit 0aeb1f2b74f3402e9cdb7c0b8e2c369c9767301e ]

Without this "jedec,spi-nor" compatible property, probing of the SPI NOR
does not work on the NXP i.MX6ULL EVK. Fix this by adding this
compatible property to the DT.

Fixes: 7d77b8505aa9 ("ARM: dts: imx6ull: fix the imx6ull-14x14-evk configuration")
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index c2a9dd57e56a..aa86341adaaa 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -215,7 +215,7 @@
 	flash0: n25q256a@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "micron,n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 031/187] ARM: vexpress: Set-up shared OPP table instead of individual for each CPU

[Sasha Levin]

From: Sudeep Holla <sudeep.holla@arm.com>

[ Upstream commit 2a76352ad2cc6b78e58f737714879cc860903802 ]

Currently we add individual copy of same OPP table for each CPU within
the cluster. This is redundant and doesn't reflect the reality.

We can't use core cpumask to set policy->cpus in ve_spc_cpufreq_init()
anymore as it gets called via cpuhp_cpufreq_online()->cpufreq_online()
->cpufreq_driver->init() and the cpumask gets updated upon CPU hotplug
operations. It also may cause issues when the vexpress_spc_cpufreq
driver is built as a module.

Since ve_spc_clk_init is built-in device initcall, we should be able to
use the same topology_core_cpumask to set the opp sharing cpumask via
dev_pm_opp_set_sharing_cpus and use the same later in the driver via
dev_pm_opp_get_sharing_cpus.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-vexpress/spc.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index 354e0e7025ae..1da11bdb1dfb 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -551,8 +551,9 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev)
 
 static int __init ve_spc_clk_init(void)
 {
-	int cpu;
+	int cpu, cluster;
 	struct clk *clk;
+	bool init_opp_table[MAX_CLUSTERS] = { false };
 
 	if (!info)
 		return 0; /* Continue only if SPC is initialised */
@@ -578,8 +579,17 @@ static int __init ve_spc_clk_init(void)
 			continue;
 		}
 
+		cluster = topology_physical_package_id(cpu_dev->id);
+		if (init_opp_table[cluster])
+			continue;
+
 		if (ve_init_opp_table(cpu_dev))
 			pr_warn("failed to initialise cpu%d opp table\n", cpu);
+		else if (dev_pm_opp_set_sharing_cpus(cpu_dev,
+			 topology_core_cpumask(cpu_dev->id)))
+			pr_warn("failed to mark OPPs shared for cpu%d\n", cpu);
+		else
+			init_opp_table[cluster] = true;
 	}
 
 	platform_device_register_simple("vexpress-spc-cpufreq", -1, NULL, 0);
-- 
2.20.1

[PATCH AUTOSEL 5.4 031/187] ARM: vexpress: Set-up shared OPP table instead of individual for each CPU

[Sasha Levin]

From: Sudeep Holla <sudeep.holla@arm.com>

[ Upstream commit 2a76352ad2cc6b78e58f737714879cc860903802 ]

Currently we add individual copy of same OPP table for each CPU within
the cluster. This is redundant and doesn't reflect the reality.

We can't use core cpumask to set policy->cpus in ve_spc_cpufreq_init()
anymore as it gets called via cpuhp_cpufreq_online()->cpufreq_online()
->cpufreq_driver->init() and the cpumask gets updated upon CPU hotplug
operations. It also may cause issues when the vexpress_spc_cpufreq
driver is built as a module.

Since ve_spc_clk_init is built-in device initcall, we should be able to
use the same topology_core_cpumask to set the opp sharing cpumask via
dev_pm_opp_set_sharing_cpus and use the same later in the driver via
dev_pm_opp_get_sharing_cpus.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-vexpress/spc.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index 354e0e7025ae..1da11bdb1dfb 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -551,8 +551,9 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev)
 
 static int __init ve_spc_clk_init(void)
 {
-	int cpu;
+	int cpu, cluster;
 	struct clk *clk;
+	bool init_opp_table[MAX_CLUSTERS] = { false };
 
 	if (!info)
 		return 0; /* Continue only if SPC is initialised */
@@ -578,8 +579,17 @@ static int __init ve_spc_clk_init(void)
 			continue;
 		}
 
+		cluster = topology_physical_package_id(cpu_dev->id);
+		if (init_opp_table[cluster])
+			continue;
+
 		if (ve_init_opp_table(cpu_dev))
 			pr_warn("failed to initialise cpu%d opp table\n", cpu);
+		else if (dev_pm_opp_set_sharing_cpus(cpu_dev,
+			 topology_core_cpumask(cpu_dev->id)))
+			pr_warn("failed to mark OPPs shared for cpu%d\n", cpu);
+		else
+			init_opp_table[cluster] = true;
 	}
 
 	platform_device_register_simple("vexpress-spc-cpufreq", -1, NULL, 0);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 032/187] netfilter: uapi: Avoid undefined left-shift in xt_sctp.h

[Sasha Levin]

From: Phil Sutter <phil@nwl.cc>

[ Upstream commit 164166558aacea01b99c8c8ffb710d930405ba69 ]

With 'bytes(__u32)' being 32, a left-shift of 31 may happen which is
undefined for the signed 32-bit value 1. Avoid this by declaring 1 as
unsigned.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/netfilter/xt_sctp.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/uapi/linux/netfilter/xt_sctp.h b/include/uapi/linux/netfilter/xt_sctp.h
index 4bc6d1a08781..b4d804a9fccb 100644
--- a/include/uapi/linux/netfilter/xt_sctp.h
+++ b/include/uapi/linux/netfilter/xt_sctp.h
@@ -41,19 +41,19 @@ struct xt_sctp_info {
 #define SCTP_CHUNKMAP_SET(chunkmap, type) 		\
 	do { 						\
 		(chunkmap)[type / bytes(__u32)] |= 	\
-			1 << (type % bytes(__u32));	\
+			1u << (type % bytes(__u32));	\
 	} while (0)
 
 #define SCTP_CHUNKMAP_CLEAR(chunkmap, type)		 	\
 	do {							\
 		(chunkmap)[type / bytes(__u32)] &= 		\
-			~(1 << (type % bytes(__u32)));	\
+			~(1u << (type % bytes(__u32)));	\
 	} while (0)
 
 #define SCTP_CHUNKMAP_IS_SET(chunkmap, type) 			\
 ({								\
 	((chunkmap)[type / bytes (__u32)] & 		\
-		(1 << (type % bytes (__u32)))) ? 1: 0;	\
+		(1u << (type % bytes (__u32)))) ? 1: 0;	\
 })
 
 #define SCTP_CHUNKMAP_RESET(chunkmap) \
-- 
2.20.1

[PATCH AUTOSEL 5.4 033/187] netfilter: nft_set_rbtree: bogus lookup/get on consecutive elements in named sets

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit db3b665dd77b34e34df00e17d7b299c98fcfb2c5 ]

The existing rbtree implementation might store consecutive elements
where the closing element and the opening element might overlap, eg.

	[ a, a+1) [ a+1, a+2)

This patch removes the optimization for non-anonymous sets in the exact
matching case, where it is assumed to stop searching in case that the
closing element is found. Instead, invalidate candidate interval and
keep looking further in the tree.

The lookup/get operation might return false, while there is an element
in the rbtree. Moreover, the get operation returns true as if a+2 would
be in the tree. This happens with named sets after several set updates.

The existing lookup optimization (that only works for the anonymous
sets) might not reach the opening [ a+1,... element if the closing
...,a+1) is found in first place when walking over the rbtree. Hence,
walking the full tree in that case is needed.

This patch fixes the lookup and get operations.

Fixes: e701001e7cbe ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates")
Fixes: ba0e4d9917b4 ("netfilter: nf_tables: get set elements via netlink")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_set_rbtree.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c
index 57123259452f..a9f804f7a04a 100644
--- a/net/netfilter/nft_set_rbtree.c
+++ b/net/netfilter/nft_set_rbtree.c
@@ -74,8 +74,13 @@ static bool __nft_rbtree_lookup(const struct net *net, const struct nft_set *set
 				parent = rcu_dereference_raw(parent->rb_left);
 				continue;
 			}
-			if (nft_rbtree_interval_end(rbe))
-				goto out;
+			if (nft_rbtree_interval_end(rbe)) {
+				if (nft_set_is_anonymous(set))
+					return false;
+				parent = rcu_dereference_raw(parent->rb_left);
+				interval = NULL;
+				continue;
+			}
 
 			*ext = &rbe->ext;
 			return true;
@@ -88,7 +93,7 @@ static bool __nft_rbtree_lookup(const struct net *net, const struct nft_set *set
 		*ext = &interval->ext;
 		return true;
 	}
-out:
+
 	return false;
 }
 
@@ -139,8 +144,10 @@ static bool __nft_rbtree_get(const struct net *net, const struct nft_set *set,
 			if (flags & NFT_SET_ELEM_INTERVAL_END)
 				interval = rbe;
 		} else {
-			if (!nft_set_elem_active(&rbe->ext, genmask))
+			if (!nft_set_elem_active(&rbe->ext, genmask)) {
 				parent = rcu_dereference_raw(parent->rb_left);
+				continue;
+			}
 
 			if (!nft_set_ext_exists(&rbe->ext, NFT_SET_EXT_FLAGS) ||
 			    (*nft_set_ext_flags(&rbe->ext) & NFT_SET_ELEM_INTERVAL_END) ==
@@ -148,7 +155,11 @@ static bool __nft_rbtree_get(const struct net *net, const struct nft_set *set,
 				*elem = rbe;
 				return true;
 			}
-			return false;
+
+			if (nft_rbtree_interval_end(rbe))
+				interval = NULL;
+
+			parent = rcu_dereference_raw(parent->rb_left);
 		}
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 034/187] netfilter: nf_tables: validate NFT_SET_ELEM_INTERVAL_END

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit bffc124b6fe37d0ae9b428d104efb426403bb5c9 ]

Only NFTA_SET_ELEM_KEY and NFTA_SET_ELEM_FLAGS make sense for elements
whose NFT_SET_ELEM_INTERVAL_END flag is set on.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 712a428509ad..7120eba71ac5 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -4489,14 +4489,20 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set,
 		if (nla[NFTA_SET_ELEM_DATA] == NULL &&
 		    !(flags & NFT_SET_ELEM_INTERVAL_END))
 			return -EINVAL;
-		if (nla[NFTA_SET_ELEM_DATA] != NULL &&
-		    flags & NFT_SET_ELEM_INTERVAL_END)
-			return -EINVAL;
 	} else {
 		if (nla[NFTA_SET_ELEM_DATA] != NULL)
 			return -EINVAL;
 	}
 
+	if ((flags & NFT_SET_ELEM_INTERVAL_END) &&
+	     (nla[NFTA_SET_ELEM_DATA] ||
+	      nla[NFTA_SET_ELEM_OBJREF] ||
+	      nla[NFTA_SET_ELEM_TIMEOUT] ||
+	      nla[NFTA_SET_ELEM_EXPIRATION] ||
+	      nla[NFTA_SET_ELEM_USERDATA] ||
+	      nla[NFTA_SET_ELEM_EXPR]))
+		return -EINVAL;
+
 	timeout = 0;
 	if (nla[NFTA_SET_ELEM_TIMEOUT] != NULL) {
 		if (!(set->flags & NFT_SET_TIMEOUT))
-- 
2.20.1

[PATCH AUTOSEL 5.4 035/187] netfilter: nf_tables: validate NFT_DATA_VALUE after nft_data_init()

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 0d2c96af797ba149e559c5875c0151384ab6dd14 ]

Userspace might bogusly sent NFT_DATA_VERDICT in several netlink
attributes that assume NFT_DATA_VALUE. Moreover, make sure that error
path invokes nft_data_release() to decrement the reference count on the
chain object.

Fixes: 96518518cc41 ("netfilter: add nftables")
Fixes: 0f3cd9b36977 ("netfilter: nf_tables: add range expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c |  4 +++-
 net/netfilter/nft_bitwise.c   |  4 ++--
 net/netfilter/nft_cmp.c       |  6 ++++++
 net/netfilter/nft_range.c     | 10 ++++++++++
 4 files changed, 21 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 7120eba71ac5..4c03c14e46bc 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -4252,8 +4252,10 @@ static int nft_get_set_elem(struct nft_ctx *ctx, struct nft_set *set,
 		return err;
 
 	err = -EINVAL;
-	if (desc.type != NFT_DATA_VALUE || desc.len != set->klen)
+	if (desc.type != NFT_DATA_VALUE || desc.len != set->klen) {
+		nft_data_release(&elem.key.val, desc.type);
 		return err;
+	}
 
 	priv = set->ops->get(ctx->net, set, &elem, flags);
 	if (IS_ERR(priv))
diff --git a/net/netfilter/nft_bitwise.c b/net/netfilter/nft_bitwise.c
index 02afa752dd2e..10e9d50e4e19 100644
--- a/net/netfilter/nft_bitwise.c
+++ b/net/netfilter/nft_bitwise.c
@@ -80,7 +80,7 @@ static int nft_bitwise_init(const struct nft_ctx *ctx,
 			    tb[NFTA_BITWISE_MASK]);
 	if (err < 0)
 		return err;
-	if (d1.len != priv->len) {
+	if (d1.type != NFT_DATA_VALUE || d1.len != priv->len) {
 		err = -EINVAL;
 		goto err1;
 	}
@@ -89,7 +89,7 @@ static int nft_bitwise_init(const struct nft_ctx *ctx,
 			    tb[NFTA_BITWISE_XOR]);
 	if (err < 0)
 		goto err1;
-	if (d2.len != priv->len) {
+	if (d2.type != NFT_DATA_VALUE || d2.len != priv->len) {
 		err = -EINVAL;
 		goto err2;
 	}
diff --git a/net/netfilter/nft_cmp.c b/net/netfilter/nft_cmp.c
index 0744b2bb46da..ae730dba60c8 100644
--- a/net/netfilter/nft_cmp.c
+++ b/net/netfilter/nft_cmp.c
@@ -80,6 +80,12 @@ static int nft_cmp_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 	if (err < 0)
 		return err;
 
+	if (desc.type != NFT_DATA_VALUE) {
+		err = -EINVAL;
+		nft_data_release(&priv->data, desc.type);
+		return err;
+	}
+
 	priv->sreg = nft_parse_register(tb[NFTA_CMP_SREG]);
 	err = nft_validate_register_load(priv->sreg, desc.len);
 	if (err < 0)
diff --git a/net/netfilter/nft_range.c b/net/netfilter/nft_range.c
index 4701fa8a45e7..89efcc5a533d 100644
--- a/net/netfilter/nft_range.c
+++ b/net/netfilter/nft_range.c
@@ -66,11 +66,21 @@ static int nft_range_init(const struct nft_ctx *ctx, const struct nft_expr *expr
 	if (err < 0)
 		return err;
 
+	if (desc_from.type != NFT_DATA_VALUE) {
+		err = -EINVAL;
+		goto err1;
+	}
+
 	err = nft_data_init(NULL, &priv->data_to, sizeof(priv->data_to),
 			    &desc_to, tb[NFTA_RANGE_TO_DATA]);
 	if (err < 0)
 		goto err1;
 
+	if (desc_to.type != NFT_DATA_VALUE) {
+		err = -EINVAL;
+		goto err2;
+	}
+
 	if (desc_from.len != desc_to.len) {
 		err = -EINVAL;
 		goto err2;
-- 
2.20.1

[PATCH AUTOSEL 5.4 036/187] netfilter: nf_tables: skip module reference count bump on object updates

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit fd57d0cbe187e93f63777d36e9f49293311d417f ]

Use __nft_obj_type_get() instead, otherwise there is a module reference
counter leak.

Fixes: d62d0ba97b58 ("netfilter: nf_tables: Introduce stateful object update operation")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 4c03c14e46bc..67ca47c7ce54 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -5217,7 +5217,7 @@ static int nf_tables_newobj(struct net *net, struct sock *nlsk,
 		if (nlh->nlmsg_flags & NLM_F_REPLACE)
 			return -EOPNOTSUPP;
 
-		type = nft_obj_type_get(net, objtype);
+		type = __nft_obj_type_get(objtype);
 		nft_ctx_init(&ctx, net, skb, nlh, family, table, NULL, nla);
 
 		return nf_tables_updobj(&ctx, type, nla[NFTA_OBJ_DATA], obj);
-- 
2.20.1

[PATCH AUTOSEL 5.4 037/187] netfilter: nf_tables_offload: return EOPNOTSUPP if rule specifies no actions

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 81ec61074bcf68acfcb2820cda3ff9d9984419c7 ]

If the rule only specifies the matching side, return EOPNOTSUPP.
Otherwise, the front-end relies on the drivers to reject this rule.

Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_offload.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/netfilter/nf_tables_offload.c b/net/netfilter/nf_tables_offload.c
index 6f7eab502e65..e743f811245f 100644
--- a/net/netfilter/nf_tables_offload.c
+++ b/net/netfilter/nf_tables_offload.c
@@ -44,6 +44,9 @@ struct nft_flow_rule *nft_flow_rule_create(struct net *net,
 		expr = nft_expr_next(expr);
 	}
 
+	if (num_actions == 0)
+		return ERR_PTR(-EOPNOTSUPP);
+
 	flow = nft_flow_rule_alloc(num_actions);
 	if (!flow)
 		return ERR_PTR(-ENOMEM);
-- 
2.20.1

[PATCH AUTOSEL 5.4 038/187] netfilter: bridge: make sure to pull arp header in br_nf_forward_arp()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 5604285839aaedfb23ebe297799c6e558939334d ]

syzbot is kind enough to remind us we need to call skb_may_pull()

BUG: KMSAN: uninit-value in br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665
CPU: 1 PID: 11631 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108
 __msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245
 br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665
 nf_hook_entry_hookfn include/linux/netfilter.h:135 [inline]
 nf_hook_slow+0x18b/0x3f0 net/netfilter/core.c:512
 nf_hook include/linux/netfilter.h:260 [inline]
 NF_HOOK include/linux/netfilter.h:303 [inline]
 __br_forward+0x78f/0xe30 net/bridge/br_forward.c:109
 br_flood+0xef0/0xfe0 net/bridge/br_forward.c:234
 br_handle_frame_finish+0x1a77/0x1c20 net/bridge/br_input.c:162
 nf_hook_bridge_pre net/bridge/br_input.c:245 [inline]
 br_handle_frame+0xfb6/0x1eb0 net/bridge/br_input.c:348
 __netif_receive_skb_core+0x20b9/0x51a0 net/core/dev.c:4830
 __netif_receive_skb_one_core net/core/dev.c:4927 [inline]
 __netif_receive_skb net/core/dev.c:5043 [inline]
 process_backlog+0x610/0x13c0 net/core/dev.c:5874
 napi_poll net/core/dev.c:6311 [inline]
 net_rx_action+0x7a6/0x1aa0 net/core/dev.c:6379
 __do_softirq+0x4a1/0x83a kernel/softirq.c:293
 do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1091
 </IRQ>
 do_softirq kernel/softirq.c:338 [inline]
 __local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:190
 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32
 rcu_read_unlock_bh include/linux/rcupdate.h:688 [inline]
 __dev_queue_xmit+0x38e8/0x4200 net/core/dev.c:3819
 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3825
 packet_snd net/packet/af_packet.c:2959 [inline]
 packet_sendmsg+0x8234/0x9100 net/packet/af_packet.c:2984
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg net/socket.c:657 [inline]
 __sys_sendto+0xc44/0xc70 net/socket.c:1952
 __do_sys_sendto net/socket.c:1964 [inline]
 __se_sys_sendto+0x107/0x130 net/socket.c:1960
 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960
 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45a679
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f0a3c9e5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 000000000045a679
RDX: 000000000000000e RSI: 0000000020000200 RDI: 0000000000000003
RBP: 000000000075bf20 R08: 00000000200000c0 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f0a3c9e66d4
R13: 00000000004c8ec1 R14: 00000000004dfe28 R15: 00000000ffffffff

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline]
 kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132
 kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86
 slab_alloc_node mm/slub.c:2773 [inline]
 __kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381
 __kmalloc_reserve net/core/skbuff.c:141 [inline]
 __alloc_skb+0x306/0xa10 net/core/skbuff.c:209
 alloc_skb include/linux/skbuff.h:1049 [inline]
 alloc_skb_with_frags+0x18c/0xa80 net/core/skbuff.c:5662
 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2244
 packet_alloc_skb net/packet/af_packet.c:2807 [inline]
 packet_snd net/packet/af_packet.c:2902 [inline]
 packet_sendmsg+0x63a6/0x9100 net/packet/af_packet.c:2984
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg net/socket.c:657 [inline]
 __sys_sendto+0xc44/0xc70 net/socket.c:1952
 __do_sys_sendto net/socket.c:1964 [inline]
 __se_sys_sendto+0x107/0x130 net/socket.c:1960
 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960
 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: c4e70a87d975 ("netfilter: bridge: rename br_netfilter.c to br_netfilter_hooks.c")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bridge/br_netfilter_hooks.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index af7800103e51..59980ecfc962 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -662,6 +662,9 @@ static unsigned int br_nf_forward_arp(void *priv,
 		nf_bridge_pull_encap_header(skb);
 	}
 
+	if (unlikely(!pskb_may_pull(skb, sizeof(struct arphdr))))
+		return NF_DROP;
+
 	if (arp_hdr(skb)->ar_pln != 4) {
 		if (is_vlan_arp(skb, state->net))
 			nf_bridge_push_encap_header(skb);
-- 
2.20.1

[Bridge] [PATCH AUTOSEL 5.4 038/187] netfilter: bridge: make sure to pull arp header in br_nf_forward_arp()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 5604285839aaedfb23ebe297799c6e558939334d ]

syzbot is kind enough to remind us we need to call skb_may_pull()

BUG: KMSAN: uninit-value in br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665
CPU: 1 PID: 11631 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108
 __msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245
 br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665
 nf_hook_entry_hookfn include/linux/netfilter.h:135 [inline]
 nf_hook_slow+0x18b/0x3f0 net/netfilter/core.c:512
 nf_hook include/linux/netfilter.h:260 [inline]
 NF_HOOK include/linux/netfilter.h:303 [inline]
 __br_forward+0x78f/0xe30 net/bridge/br_forward.c:109
 br_flood+0xef0/0xfe0 net/bridge/br_forward.c:234
 br_handle_frame_finish+0x1a77/0x1c20 net/bridge/br_input.c:162
 nf_hook_bridge_pre net/bridge/br_input.c:245 [inline]
 br_handle_frame+0xfb6/0x1eb0 net/bridge/br_input.c:348
 __netif_receive_skb_core+0x20b9/0x51a0 net/core/dev.c:4830
 __netif_receive_skb_one_core net/core/dev.c:4927 [inline]
 __netif_receive_skb net/core/dev.c:5043 [inline]
 process_backlog+0x610/0x13c0 net/core/dev.c:5874
 napi_poll net/core/dev.c:6311 [inline]
 net_rx_action+0x7a6/0x1aa0 net/core/dev.c:6379
 __do_softirq+0x4a1/0x83a kernel/softirq.c:293
 do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1091
 </IRQ>
 do_softirq kernel/softirq.c:338 [inline]
 __local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:190
 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32
 rcu_read_unlock_bh include/linux/rcupdate.h:688 [inline]
 __dev_queue_xmit+0x38e8/0x4200 net/core/dev.c:3819
 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3825
 packet_snd net/packet/af_packet.c:2959 [inline]
 packet_sendmsg+0x8234/0x9100 net/packet/af_packet.c:2984
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg net/socket.c:657 [inline]
 __sys_sendto+0xc44/0xc70 net/socket.c:1952
 __do_sys_sendto net/socket.c:1964 [inline]
 __se_sys_sendto+0x107/0x130 net/socket.c:1960
 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960
 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45a679
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f0a3c9e5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 000000000045a679
RDX: 000000000000000e RSI: 0000000020000200 RDI: 0000000000000003
RBP: 000000000075bf20 R08: 00000000200000c0 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f0a3c9e66d4
R13: 00000000004c8ec1 R14: 00000000004dfe28 R15: 00000000ffffffff

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline]
 kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132
 kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86
 slab_alloc_node mm/slub.c:2773 [inline]
 __kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381
 __kmalloc_reserve net/core/skbuff.c:141 [inline]
 __alloc_skb+0x306/0xa10 net/core/skbuff.c:209
 alloc_skb include/linux/skbuff.h:1049 [inline]
 alloc_skb_with_frags+0x18c/0xa80 net/core/skbuff.c:5662
 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2244
 packet_alloc_skb net/packet/af_packet.c:2807 [inline]
 packet_snd net/packet/af_packet.c:2902 [inline]
 packet_sendmsg+0x63a6/0x9100 net/packet/af_packet.c:2984
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg net/socket.c:657 [inline]
 __sys_sendto+0xc44/0xc70 net/socket.c:1952
 __do_sys_sendto net/socket.c:1964 [inline]
 __se_sys_sendto+0x107/0x130 net/socket.c:1960
 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960
 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: c4e70a87d975 ("netfilter: bridge: rename br_netfilter.c to br_netfilter_hooks.c")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bridge/br_netfilter_hooks.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index af7800103e51..59980ecfc962 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -662,6 +662,9 @@ static unsigned int br_nf_forward_arp(void *priv,
 		nf_bridge_pull_encap_header(skb);
 	}
 
+	if (unlikely(!pskb_may_pull(skb, sizeof(struct arphdr))))
+		return NF_DROP;
+
 	if (arp_hdr(skb)->ar_pln != 4) {
 		if (is_vlan_arp(skb, state->net))
 			nf_bridge_push_encap_header(skb);
-- 
2.20.1

[PATCH AUTOSEL 5.4 039/187] ARM: dts: BCM5301X: Fix MDIO node address/size cells

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 093c3f94e922d83a734fc4da08cc5814990f32c6 ]

The MDIO node on BCM5301X had an reversed #address-cells and
 #size-cells properties, correct those, silencing checker warnings:

.../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected

Reported-by: Simon Horman <simon.horman@netronome.com>
Fixes: 23f1eca6d59b ("ARM: dts: BCM5301X: Specify MDIO bus in the DT")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm5301x.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 372dc1eb88a0..2d9b4dd05830 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -353,8 +353,8 @@
 	mdio: mdio@18003000 {
 		compatible = "brcm,iproc-mdio";
 		reg = <0x18003000 0x8>;
-		#size-cells = <1>;
-		#address-cells = <0>;
+		#size-cells = <0>;
+		#address-cells = <1>;
 	};
 
 	mdio-bus-mux@18003000 {
-- 
2.20.1

[PATCH AUTOSEL 5.4 039/187] ARM: dts: BCM5301X: Fix MDIO node address/size cells

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 093c3f94e922d83a734fc4da08cc5814990f32c6 ]

The MDIO node on BCM5301X had an reversed #address-cells and
 #size-cells properties, correct those, silencing checker warnings:

.../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected

Reported-by: Simon Horman <simon.horman@netronome.com>
Fixes: 23f1eca6d59b ("ARM: dts: BCM5301X: Specify MDIO bus in the DT")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm5301x.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 372dc1eb88a0..2d9b4dd05830 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -353,8 +353,8 @@
 	mdio: mdio@18003000 {
 		compatible = "brcm,iproc-mdio";
 		reg = <0x18003000 0x8>;
-		#size-cells = <1>;
-		#address-cells = <0>;
+		#size-cells = <0>;
+		#address-cells = <1>;
 	};
 
 	mdio-bus-mux@18003000 {
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 040/187] selftests/ftrace: Fix to check the existence of set_ftrace_filter

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit fd1baf6ca2ea3550ea47f2bb0bdcf34ec764a779 ]

If we run ftracetest on the kernel with CONFIG_DYNAMIC_FTRACE=n,
there is no set_ftrace_filter and all test cases are failed, because
reset_ftrace_filter() returns an error.
Let's check whether set_ftrace_filter exists in reset_ftrace_filter()
and clean up only set_ftrace_notrace in initialize_ftrace().

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/ftrace/test.d/functions | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions
index 86986c4bba54..5d4550591ff9 100644
--- a/tools/testing/selftests/ftrace/test.d/functions
+++ b/tools/testing/selftests/ftrace/test.d/functions
@@ -46,6 +46,9 @@ reset_events_filter() { # reset all current setting filters
 }
 
 reset_ftrace_filter() { # reset all triggers in set_ftrace_filter
+    if [ ! -f set_ftrace_filter ]; then
+      return 0
+    fi
     echo > set_ftrace_filter
     grep -v '^#' set_ftrace_filter | while read t; do
 	tr=`echo $t | cut -d: -f2`
@@ -93,7 +96,7 @@ initialize_ftrace() { # Reset ftrace to initial-state
     disable_events
     [ -f set_event_pid ] && echo > set_event_pid
     [ -f set_ftrace_pid ] && echo > set_ftrace_pid
-    [ -f set_ftrace_filter ] && echo | tee set_ftrace_*
+    [ -f set_ftrace_notrace ] && echo > set_ftrace_notrace
     [ -f set_graph_function ] && echo | tee set_graph_*
     [ -f stack_trace_filter ] && echo > stack_trace_filter
     [ -f kprobe_events ] && echo > kprobe_events
-- 
2.20.1

[PATCH AUTOSEL 5.4 041/187] selftests/ftrace: Fix ftrace test cases to check unsupported

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 25deae098e748d8d36bc35129a66734b8f6925c9 ]

Since dynamic function tracer can be disabled, set_ftrace_filter
can be disappeared. Test cases which depends on it, must check
whether the set_ftrace_filter exists or not before testing
and if not, return as unsupported.

Also, if the function tracer itself is disabled, we can not
set "function" to current_tracer. Test cases must check it
before testing, and return as unsupported.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc | 2 ++
 tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc | 5 +++++
 2 files changed, 7 insertions(+)

diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc
index 36fb59f886ea..1a52f2883fe0 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc
@@ -3,6 +3,8 @@
 # description: ftrace - stacktrace filter command
 # flags: instance
 
+[ ! -f set_ftrace_filter ] && exit_unsupported
+
 echo _do_fork:stacktrace >> set_ftrace_filter
 
 grep -q "_do_fork:stacktrace:unlimited" set_ftrace_filter
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc
index 86a1f07ef2ca..71fa3f49e35e 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc
@@ -15,6 +15,11 @@ if [ $NP -eq 1 ] ;then
   exit_unresolved
 fi
 
+if ! grep -q "function" available_tracers ; then
+  echo "Function trace is not enabled"
+  exit_unsupported
+fi
+
 ORIG_CPUMASK=`cat tracing_cpumask`
 
 do_reset() {
-- 
2.20.1

[PATCH AUTOSEL 5.4 042/187] selftests/ftrace: Do not to use absolute debugfs path

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit ba1b9c5048e43716921abe3a1db19cebebf4a5f5 ]

Use relative path to trigger file instead of absolute debugfs path,
because if the user uses tracefs instead of debugfs, it can be
mounted at /sys/kernel/tracing.
Anyway, since the ftracetest is designed to be run at the tracing
directory, user doesn't need to use absolute path.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../test.d/trigger/inter-event/trigger-action-hist-xfail.tc   | 4 ++--
 .../trigger/inter-event/trigger-onchange-action-hist.tc       | 2 +-
 .../trigger/inter-event/trigger-snapshot-action-hist.tc       | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-action-hist-xfail.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-action-hist-xfail.tc
index 1221240f8cf6..3f2aee115f6e 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-action-hist-xfail.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-action-hist-xfail.tc
@@ -21,10 +21,10 @@ grep -q "snapshot()" README || exit_unsupported # version issue
 
 echo "Test expected snapshot action failure"
 
-echo 'hist:keys=comm:onmatch(sched.sched_wakeup).snapshot()' >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger && exit_fail
+echo 'hist:keys=comm:onmatch(sched.sched_wakeup).snapshot()' >> events/sched/sched_waking/trigger && exit_fail
 
 echo "Test expected save action failure"
 
-echo 'hist:keys=comm:onmatch(sched.sched_wakeup).save(comm,prio)' >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger && exit_fail
+echo 'hist:keys=comm:onmatch(sched.sched_wakeup).save(comm,prio)' >> events/sched/sched_waking/trigger && exit_fail
 
 exit_xfail
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onchange-action-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onchange-action-hist.tc
index 064a284e4e75..c80007aa9f86 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onchange-action-hist.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onchange-action-hist.tc
@@ -16,7 +16,7 @@ grep -q "onchange(var)" README || exit_unsupported # version issue
 
 echo "Test onchange action"
 
-echo 'hist:keys=comm:newprio=prio:onchange($newprio).save(comm,prio) if comm=="ping"' >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
+echo 'hist:keys=comm:newprio=prio:onchange($newprio).save(comm,prio) if comm=="ping"' >> events/sched/sched_waking/trigger
 
 ping $LOCALHOST -c 3
 nice -n 1 ping $LOCALHOST -c 3
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-snapshot-action-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-snapshot-action-hist.tc
index 18fff69fc433..f546c1b66a9b 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-snapshot-action-hist.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-snapshot-action-hist.tc
@@ -23,9 +23,9 @@ grep -q "snapshot()" README || exit_unsupported # version issue
 
 echo "Test snapshot action"
 
-echo 1 > /sys/kernel/debug/tracing/events/sched/enable
+echo 1 > events/sched/enable
 
-echo 'hist:keys=comm:newprio=prio:onchange($newprio).save(comm,prio):onchange($newprio).snapshot() if comm=="ping"' >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
+echo 'hist:keys=comm:newprio=prio:onchange($newprio).save(comm,prio):onchange($newprio).snapshot() if comm=="ping"' >> events/sched/sched_waking/trigger
 
 ping $LOCALHOST -c 3
 nice -n 1 ping $LOCALHOST -c 3
-- 
2.20.1

[PATCH AUTOSEL 5.4 043/187] selftests/ftrace: Fix multiple kprobe testcase

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 5cc6c8d4a99d0ee4d5466498e258e593df1d3eb6 ]

Fix multiple kprobe event testcase to work it correctly.
There are 2 bugfixes.
 - Since `wc -l FILE` returns not only line number but also
   FILE filename, following "if" statement always failed.
   Fix this bug by replacing it with 'cat FILE | wc -l'
 - Since "while do-done loop" block with pipeline becomes a
   subshell, $N local variable is not update outside of
   the loop.
   Fix this bug by using actual target number (256) instead
   of $N.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/ftrace/test.d/kprobe/multiple_kprobes.tc      | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc b/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
index 5862eee91e1d..6e3dbe5f96b7 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
@@ -20,9 +20,9 @@ while read i; do
   test $N -eq 256 && break
 done
 
-L=`wc -l kprobe_events`
-if [ $L -ne $N ]; then
-  echo "The number of kprobes events ($L) is not $N"
+L=`cat kprobe_events | wc -l`
+if [ $L -ne 256 ]; then
+  echo "The number of kprobes events ($L) is not 256"
   exit_fail
 fi
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 044/187] selftests: safesetid: Move link library to LDLIBS

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit be12252212fa3dfed6e75112865095c484c0ce87 ]

Move -lcap to LDLIBS from CFLAGS because it is a library
to be linked.

Without this, safesetid failed to build with link error
as below.

----
/usr/bin/ld: /tmp/ccL8rZHT.o: in function `drop_caps':
safesetid-test.c:(.text+0xe7): undefined reference to `cap_get_proc'
/usr/bin/ld: safesetid-test.c:(.text+0x107): undefined reference to `cap_set_flag'
/usr/bin/ld: safesetid-test.c:(.text+0x10f): undefined reference to `cap_set_proc'
/usr/bin/ld: safesetid-test.c:(.text+0x117): undefined reference to `cap_free'
/usr/bin/ld: safesetid-test.c:(.text+0x136): undefined reference to `cap_clear'
collect2: error: ld returned 1 exit status
----

Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/safesetid/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/safesetid/Makefile b/tools/testing/selftests/safesetid/Makefile
index 98da7a504737..cac42cd36a1b 100644
--- a/tools/testing/selftests/safesetid/Makefile
+++ b/tools/testing/selftests/safesetid/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for mount selftests.
-CFLAGS = -Wall -lcap -O2
+CFLAGS = -Wall -O2
+LDLIBS = -lcap
 
 TEST_PROGS := run_tests.sh
 TEST_GEN_FILES := safesetid-test
-- 
2.20.1

[PATCH AUTOSEL 5.4 045/187] selftests: safesetid: Check the return value of setuid/setgid

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 295c4e21cf27ac9af542140e3e797df9e0cf7b5f ]

Check the return value of setuid() and setgid().
This fixes the following warnings and improves test result.

safesetid-test.c: In function ‘main’:
safesetid-test.c:294:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
  setuid(NO_POLICY_USER);
  ^~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:295:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result]
  setgid(NO_POLICY_USER);
  ^~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:309:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
  setuid(RESTRICTED_PARENT);
  ^~~~~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:310:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result]
  setgid(RESTRICTED_PARENT);
  ^~~~~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c: In function ‘test_setuid’:
safesetid-test.c:216:3: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
   setuid(child_uid);
   ^~~~~~~~~~~~~~~~~

Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../testing/selftests/safesetid/safesetid-test.c  | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/tools/testing/selftests/safesetid/safesetid-test.c b/tools/testing/selftests/safesetid/safesetid-test.c
index 8f40c6ecdad1..0c4d50644c13 100644
--- a/tools/testing/selftests/safesetid/safesetid-test.c
+++ b/tools/testing/selftests/safesetid/safesetid-test.c
@@ -213,7 +213,8 @@ static void test_setuid(uid_t child_uid, bool expect_success)
 	}
 
 	if (cpid == 0) {	    /* Code executed by child */
-		setuid(child_uid);
+		if (setuid(child_uid) < 0)
+			exit(EXIT_FAILURE);
 		if (getuid() == child_uid)
 			exit(EXIT_SUCCESS);
 		else
@@ -291,8 +292,10 @@ int main(int argc, char **argv)
 
 	// First test to make sure we can write userns mappings from a user
 	// that doesn't have any restrictions (as long as it has CAP_SETUID);
-	setuid(NO_POLICY_USER);
-	setgid(NO_POLICY_USER);
+	if (setuid(NO_POLICY_USER) < 0)
+		die("Error with set uid(%d)\n", NO_POLICY_USER);
+	if (setgid(NO_POLICY_USER) < 0)
+		die("Error with set gid(%d)\n", NO_POLICY_USER);
 
 	// Take away all but setid caps
 	drop_caps(true);
@@ -306,8 +309,10 @@ int main(int argc, char **argv)
 		die("test_userns failed when it should work\n");
 	}
 
-	setuid(RESTRICTED_PARENT);
-	setgid(RESTRICTED_PARENT);
+	if (setuid(RESTRICTED_PARENT) < 0)
+		die("Error with set uid(%d)\n", RESTRICTED_PARENT);
+	if (setgid(RESTRICTED_PARENT) < 0)
+		die("Error with set gid(%d)\n", RESTRICTED_PARENT);
 
 	test_setuid(ROOT_USER, false);
 	test_setuid(ALLOWED_CHILD1, true);
-- 
2.20.1

[PATCH AUTOSEL 5.4 046/187] selftests: safesetid: Fix Makefile to set correct test program

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 8ef1ec0ca32c6f8a87f5b4c24b1db26da67c5609 ]

Fix Makefile to set safesetid-test.sh to TEST_PROGS instead
of non existing run_tests.sh.

Without this fix, I got following error.
  ----
  TAP version 13
  1..1
  # selftests: safesetid: run_tests.sh
  # Warning: file run_tests.sh is missing!
  not ok 1 selftests: safesetid: run_tests.sh
  ----

Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/safesetid/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/safesetid/Makefile b/tools/testing/selftests/safesetid/Makefile
index cac42cd36a1b..fa02c4d5ec13 100644
--- a/tools/testing/selftests/safesetid/Makefile
+++ b/tools/testing/selftests/safesetid/Makefile
@@ -3,7 +3,7 @@
 CFLAGS = -Wall -O2
 LDLIBS = -lcap
 
-TEST_PROGS := run_tests.sh
+TEST_PROGS := safesetid-test.sh
 TEST_GEN_FILES := safesetid-test
 
 include ../lib.mk
-- 
2.20.1

[PATCH AUTOSEL 5.4 047/187] ARM: exynos_defconfig: Restore debugfs support

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit a2315d3aea5976acd919d3d3fcf82f752562c25b ]

Commit 9f532d26c75c ("ARM: exynos_defconfig: Trim and reorganize with
savedefconfig") removed explicit enable line for CONFIG_DEBUG_FS, because
that feature has been selected by other enabled options: CONFIG_TRACING,
which in turn had been selected by CONFIG_PERF_EVENTS and
CONFIG_PROVE_LOCKING.

In meantime, commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS
dependency") removed the dependency between CONFIG_DEBUG_FS and
CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds.

Enable it again explicitly, as debugfs support is essential for various
automated testing tools.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/configs/exynos_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 08db1c83eb2d..736ed7a7bcf8 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -348,6 +348,7 @@ CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_INFO=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DETECT_HUNG_TASK is not set
-- 
2.20.1

[PATCH AUTOSEL 5.4 047/187] ARM: exynos_defconfig: Restore debugfs support

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit a2315d3aea5976acd919d3d3fcf82f752562c25b ]

Commit 9f532d26c75c ("ARM: exynos_defconfig: Trim and reorganize with
savedefconfig") removed explicit enable line for CONFIG_DEBUG_FS, because
that feature has been selected by other enabled options: CONFIG_TRACING,
which in turn had been selected by CONFIG_PERF_EVENTS and
CONFIG_PROVE_LOCKING.

In meantime, commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS
dependency") removed the dependency between CONFIG_DEBUG_FS and
CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds.

Enable it again explicitly, as debugfs support is essential for various
automated testing tools.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/configs/exynos_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 08db1c83eb2d..736ed7a7bcf8 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -348,6 +348,7 @@ CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_INFO=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DETECT_HUNG_TASK is not set
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 048/187] ARM: dts: Cygnus: Fix MDIO node address/size cells

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit fac2c2da3596d77c343988bb0d41a8c533b2e73c ]

The MDIO node on Cygnus had an reversed #address-cells and
 #size-cells properties, correct those.

Fixes: 40c26d3af60a ("ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY")
Reported-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 2dac3efc7640..1bc45cfd5453 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -174,8 +174,8 @@
 		mdio: mdio@18002000 {
 			compatible = "brcm,iproc-mdio";
 			reg = <0x18002000 0x8>;
-			#size-cells = <1>;
-			#address-cells = <0>;
+			#size-cells = <0>;
+			#address-cells = <1>;
 			status = "disabled";
 
 			gphy0: ethernet-phy@0 {
-- 
2.20.1

[PATCH AUTOSEL 5.4 048/187] ARM: dts: Cygnus: Fix MDIO node address/size cells

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit fac2c2da3596d77c343988bb0d41a8c533b2e73c ]

The MDIO node on Cygnus had an reversed #address-cells and
 #size-cells properties, correct those.

Fixes: 40c26d3af60a ("ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY")
Reported-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 2dac3efc7640..1bc45cfd5453 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -174,8 +174,8 @@
 		mdio: mdio@18002000 {
 			compatible = "brcm,iproc-mdio";
 			reg = <0x18002000 0x8>;
-			#size-cells = <1>;
-			#address-cells = <0>;
+			#size-cells = <0>;
+			#address-cells = <1>;
 			status = "disabled";
 
 			gphy0: ethernet-phy@0 {
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 049/187] mlxsw: spectrum_router: Remove unlikely user-triggerable warning

[Sasha Levin]

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit 62201c00c4679ad8f0730d6d925a5d23651dfad2 ]

In case the driver vetoes the addition of an IPv6 multipath route, the
IPv6 stack will emit delete notifications for the sibling routes that
were already added to the FIB trie. Since these siblings are not present
in hardware, a warning will be generated.

Have the driver ignore notifications for routes it does not have.

Fixes: ebee3cad835f ("ipv6: Add IPv6 multipath notifications for add / replace")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
index 39d600c8b92d..210ebc91d3d6 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
@@ -5637,8 +5637,13 @@ static void mlxsw_sp_router_fib6_del(struct mlxsw_sp *mlxsw_sp,
 	if (mlxsw_sp_fib6_rt_should_ignore(rt))
 		return;
 
+	/* Multipath routes are first added to the FIB trie and only then
+	 * notified. If we vetoed the addition, we will get a delete
+	 * notification for a route we do not have. Therefore, do not warn if
+	 * route was not found.
+	 */
 	fib6_entry = mlxsw_sp_fib6_entry_lookup(mlxsw_sp, rt);
-	if (WARN_ON(!fib6_entry))
+	if (!fib6_entry)
 		return;
 
 	/* If not all the nexthops are deleted, then only reduce the nexthop
-- 
2.20.1

[PATCH AUTOSEL 5.4 050/187] selftests: forwarding: Delete IPv6 address at the end

[Sasha Levin]

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit 65cb13986229cec02635a1ecbcd1e2dd18353201 ]

When creating the second host in h2_create(), two addresses are assigned
to the interface, but only one is deleted. When running the test twice
in a row the following error is observed:

$ ./router_bridge_vlan.sh
TEST: ping                                                          [ OK ]
TEST: ping6                                                         [ OK ]
TEST: vlan                                                          [ OK ]
$ ./router_bridge_vlan.sh
RTNETLINK answers: File exists
TEST: ping                                                          [ OK ]
TEST: ping6                                                         [ OK ]
TEST: vlan                                                          [ OK ]

Fix this by deleting the address during cleanup.

Fixes: 5b1e7f9ebd56 ("selftests: forwarding: Test routed bridge interface")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/forwarding/router_bridge_vlan.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh b/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh
index fef88eb4b873..fa6a88c50750 100755
--- a/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh
+++ b/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh
@@ -36,7 +36,7 @@ h2_destroy()
 {
 	ip -6 route del 2001:db8:1::/64 vrf v$h2
 	ip -4 route del 192.0.2.0/28 vrf v$h2
-	simple_if_fini $h2 192.0.2.130/28
+	simple_if_fini $h2 192.0.2.130/28 2001:db8:2::2/64
 }
 
 router_create()
-- 
2.20.1

[PATCH AUTOSEL 5.4 051/187] spi: spi-cavium-thunderx: Add missing pci_release_regions()

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit a841e2853e1afecc2ee692b8cc5bff606bc84e4c ]

The driver forgets to call pci_release_regions() in probe failure
and remove.
Add the missed calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191206075500.18525-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-cavium-thunderx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/spi/spi-cavium-thunderx.c b/drivers/spi/spi-cavium-thunderx.c
index d12e149f1a41..fd6b9caffaf0 100644
--- a/drivers/spi/spi-cavium-thunderx.c
+++ b/drivers/spi/spi-cavium-thunderx.c
@@ -82,6 +82,7 @@ static int thunderx_spi_probe(struct pci_dev *pdev,
 
 error:
 	clk_disable_unprepare(p->clk);
+	pci_release_regions(pdev);
 	spi_master_put(master);
 	return ret;
 }
@@ -96,6 +97,7 @@ static void thunderx_spi_remove(struct pci_dev *pdev)
 		return;
 
 	clk_disable_unprepare(p->clk);
+	pci_release_regions(pdev);
 	/* Put everything in a known state. */
 	writeq(0, p->register_base + OCTEON_SPI_CFG(p));
 }
-- 
2.20.1

[PATCH AUTOSEL 5.4 052/187] net: ethernet: ti: davinci_cpdma: fix warning "device driver frees DMA memory with different size"

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 8a2b22203f8596729c54eba221b4044351bfe167 ]

The TI CPSW(s) driver produces warning with DMA API debug options enabled:

WARNING: CPU: 0 PID: 1033 at kernel/dma/debug.c:1025 check_unmap+0x4a8/0x968
DMA-API: cpsw 48484000.ethernet: device driver frees DMA memory with different size
 [device address=0x00000000abc6aa02] [map size=64 bytes] [unmap size=42 bytes]
CPU: 0 PID: 1033 Comm: ping Not tainted 5.3.0-dirty #41
Hardware name: Generic DRA72X (Flattened Device Tree)
[<c0112c60>] (unwind_backtrace) from [<c010d270>] (show_stack+0x10/0x14)
[<c010d270>] (show_stack) from [<c09bc564>] (dump_stack+0xd8/0x110)
[<c09bc564>] (dump_stack) from [<c013b93c>] (__warn+0xe0/0x10c)
[<c013b93c>] (__warn) from [<c013b9ac>] (warn_slowpath_fmt+0x44/0x6c)
[<c013b9ac>] (warn_slowpath_fmt) from [<c01e0368>] (check_unmap+0x4a8/0x968)
[<c01e0368>] (check_unmap) from [<c01e08a8>] (debug_dma_unmap_page+0x80/0x90)
[<c01e08a8>] (debug_dma_unmap_page) from [<c0752414>] (__cpdma_chan_free+0x114/0x16c)
[<c0752414>] (__cpdma_chan_free) from [<c07525c4>] (__cpdma_chan_process+0x158/0x17c)
[<c07525c4>] (__cpdma_chan_process) from [<c0753690>] (cpdma_chan_process+0x3c/0x5c)
[<c0753690>] (cpdma_chan_process) from [<c0758660>] (cpsw_tx_mq_poll+0x48/0x94)
[<c0758660>] (cpsw_tx_mq_poll) from [<c0803018>] (net_rx_action+0x108/0x4e4)
[<c0803018>] (net_rx_action) from [<c010230c>] (__do_softirq+0xec/0x598)
[<c010230c>] (__do_softirq) from [<c0143914>] (do_softirq.part.4+0x68/0x74)
[<c0143914>] (do_softirq.part.4) from [<c0143a44>] (__local_bh_enable_ip+0x124/0x17c)
[<c0143a44>] (__local_bh_enable_ip) from [<c0871590>] (ip_finish_output2+0x294/0xb7c)
[<c0871590>] (ip_finish_output2) from [<c0875440>] (ip_output+0x210/0x364)
[<c0875440>] (ip_output) from [<c0875e2c>] (ip_send_skb+0x1c/0xf8)
[<c0875e2c>] (ip_send_skb) from [<c08a7fd4>] (raw_sendmsg+0x9a8/0xc74)
[<c08a7fd4>] (raw_sendmsg) from [<c07d6b90>] (sock_sendmsg+0x14/0x24)
[<c07d6b90>] (sock_sendmsg) from [<c07d8260>] (__sys_sendto+0xbc/0x100)
[<c07d8260>] (__sys_sendto) from [<c01011ac>] (__sys_trace_return+0x0/0x14)
Exception stack(0xea9a7fa8 to 0xea9a7ff0)
...

The reason is that cpdma_chan_submit_si() now stores original buffer length
(sw_len) in CPDMA descriptor instead of adjusted buffer length (hw_len)
used to map the buffer.

Hence, fix an issue by passing correct buffer length in CPDMA descriptor.

Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Fixes: 6670acacd59e ("net: ethernet: ti: davinci_cpdma: add dma mapped submit")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/davinci_cpdma.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
index 37ba708ac781..6614fa3089b2 100644
--- a/drivers/net/ethernet/ti/davinci_cpdma.c
+++ b/drivers/net/ethernet/ti/davinci_cpdma.c
@@ -1018,7 +1018,6 @@ static int cpdma_chan_submit_si(struct submit_info *si)
 	struct cpdma_chan		*chan = si->chan;
 	struct cpdma_ctlr		*ctlr = chan->ctlr;
 	int				len = si->len;
-	int				swlen = len;
 	struct cpdma_desc __iomem	*desc;
 	dma_addr_t			buffer;
 	u32				mode;
@@ -1046,7 +1045,6 @@ static int cpdma_chan_submit_si(struct submit_info *si)
 	if (si->data_dma) {
 		buffer = si->data_dma;
 		dma_sync_single_for_device(ctlr->dev, buffer, len, chan->dir);
-		swlen |= CPDMA_DMA_EXT_MAP;
 	} else {
 		buffer = dma_map_single(ctlr->dev, si->data_virt, len, chan->dir);
 		ret = dma_mapping_error(ctlr->dev, buffer);
@@ -1065,7 +1063,8 @@ static int cpdma_chan_submit_si(struct submit_info *si)
 	writel_relaxed(mode | len, &desc->hw_mode);
 	writel_relaxed((uintptr_t)si->token, &desc->sw_token);
 	writel_relaxed(buffer, &desc->sw_buffer);
-	writel_relaxed(swlen, &desc->sw_len);
+	writel_relaxed(si->data_dma ? len | CPDMA_DMA_EXT_MAP : len,
+		       &desc->sw_len);
 	desc_read(desc, sw_len);
 
 	__cpdma_chan_submit(chan, desc);
-- 
2.20.1

[PATCH AUTOSEL 5.4 053/187] af_packet: set defaule value for tmo

[Sasha Levin]

From: Mao Wenan <maowenan@huawei.com>

[ Upstream commit b43d1f9f7067c6759b1051e8ecb84e82cef569fe ]

There is softlockup when using TPACKET_V3:
...
NMI watchdog: BUG: soft lockup - CPU#2 stuck for 60010ms!
(__irq_svc) from [<c0558a0c>] (_raw_spin_unlock_irqrestore+0x44/0x54)
(_raw_spin_unlock_irqrestore) from [<c027b7e8>] (mod_timer+0x210/0x25c)
(mod_timer) from [<c0549c30>]
(prb_retire_rx_blk_timer_expired+0x68/0x11c)
(prb_retire_rx_blk_timer_expired) from [<c027a7ac>]
(call_timer_fn+0x90/0x17c)
(call_timer_fn) from [<c027ab6c>] (run_timer_softirq+0x2d4/0x2fc)
(run_timer_softirq) from [<c021eaf4>] (__do_softirq+0x218/0x318)
(__do_softirq) from [<c021eea0>] (irq_exit+0x88/0xac)
(irq_exit) from [<c0240130>] (msa_irq_exit+0x11c/0x1d4)
(msa_irq_exit) from [<c0209cf0>] (handle_IPI+0x650/0x7f4)
(handle_IPI) from [<c02015bc>] (gic_handle_irq+0x108/0x118)
(gic_handle_irq) from [<c0558ee4>] (__irq_usr+0x44/0x5c)
...

If __ethtool_get_link_ksettings() is failed in
prb_calc_retire_blk_tmo(), msec and tmo will be zero, so tov_in_jiffies
is zero and the timer expire for retire_blk_timer is turn to
mod_timer(&pkc->retire_blk_timer, jiffies + 0),
which will trigger cpu usage of softirq is 100%.

Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Tested-by: Xiao Jiangfeng <xiaojiangfeng@huawei.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/packet/af_packet.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 82a50e850245..529d4ce945db 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -544,7 +544,8 @@ static int prb_calc_retire_blk_tmo(struct packet_sock *po,
 			msec = 1;
 			div = ecmd.base.speed / 1000;
 		}
-	}
+	} else
+		return DEFAULT_PRB_RETIRE_TOV;
 
 	mbits = (blk_size_in_bytes * 8) / (1024 * 1024);
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 054/187] fjes: fix missed check in fjes_acpi_add

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit a288f105a03a7e0e629a8da2b31f34ebf0343ee2 ]

fjes_acpi_add() misses a check for platform_device_register_simple().
Add a check to fix it.

Fixes: 658d439b2292 ("fjes: Introduce FUJITSU Extended Socket Network Device driver")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/fjes/fjes_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/fjes/fjes_main.c b/drivers/net/fjes/fjes_main.c
index b517c1af9de0..91a1059517f5 100644
--- a/drivers/net/fjes/fjes_main.c
+++ b/drivers/net/fjes/fjes_main.c
@@ -166,6 +166,9 @@ static int fjes_acpi_add(struct acpi_device *device)
 	/* create platform_device */
 	plat_dev = platform_device_register_simple(DRV_NAME, 0, fjes_resource,
 						   ARRAY_SIZE(fjes_resource));
+	if (IS_ERR(plat_dev))
+		return PTR_ERR(plat_dev);
+
 	device->driver_data = plat_dev;
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.4 055/187] NFC: nxp-nci: Fix probing without ACPI

[Sasha Levin]

From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit 868afbaca1e2a7923e48b5e8c07be34660525db5 ]

devm_acpi_dev_add_driver_gpios() returns -ENXIO if CONFIG_ACPI
is disabled (e.g. on device tree platforms).
In this case, nxp-nci will silently fail to probe.

The other NFC drivers only log a debug message if
devm_acpi_dev_add_driver_gpios() fails.
Do the same in nxp-nci to fix this problem.

Fixes: ad0acfd69add ("NFC: nxp-nci: Get rid of code duplication in ->probe()")
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/nxp-nci/i2c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/nfc/nxp-nci/i2c.c b/drivers/nfc/nxp-nci/i2c.c
index 4d1909aecd6c..9f60e4dc5a90 100644
--- a/drivers/nfc/nxp-nci/i2c.c
+++ b/drivers/nfc/nxp-nci/i2c.c
@@ -278,7 +278,7 @@ static int nxp_nci_i2c_probe(struct i2c_client *client,
 
 	r = devm_acpi_dev_add_driver_gpios(dev, acpi_nxp_nci_gpios);
 	if (r)
-		return r;
+		dev_dbg(dev, "Unable to add GPIO mapping table\n");
 
 	phy->gpiod_en = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
 	if (IS_ERR(phy->gpiod_en)) {
-- 
2.20.1

[PATCH AUTOSEL 5.4 056/187] Revert "iwlwifi: assign directly to iwl_trans->cfg in QuZ detection"

[Sasha Levin]

From: Anders Kaseorg <andersk@mit.edu>

[ Upstream commit db5cce1afc8d2475d2c1c37c2a8267dd0e151526 ]

This reverts commit 968dcfb4905245dc64d65312c0d17692fa087b99.

Both that commit and commit 809805a820c6445f7a701ded24fdc6bbc841d1e4
attempted to fix the same bug (dead assignments to the local variable
cfg), but they did so in incompatible ways. When they were both merged,
independently of each other, the combination actually caused the bug to
reappear, leading to a firmware crash on boot for some cards.

https://bugzilla.kernel.org/show_bug.cgi?id=205719

Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 24 +++++++++----------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
index 040cec17d3ad..b0b7eca1754e 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -1111,18 +1111,18 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* same thing for QuZ... */
 	if (iwl_trans->hw_rev == CSR_HW_REV_TYPE_QUZ) {
-		if (iwl_trans->cfg == &iwl_ax101_cfg_qu_hr)
-			iwl_trans->cfg = &iwl_ax101_cfg_quz_hr;
-		else if (iwl_trans->cfg == &iwl_ax201_cfg_qu_hr)
-			iwl_trans->cfg = &iwl_ax201_cfg_quz_hr;
-		else if (iwl_trans->cfg == &iwl9461_2ac_cfg_qu_b0_jf_b0)
-			iwl_trans->cfg = &iwl9461_2ac_cfg_quz_a0_jf_b0_soc;
-		else if (iwl_trans->cfg == &iwl9462_2ac_cfg_qu_b0_jf_b0)
-			iwl_trans->cfg = &iwl9462_2ac_cfg_quz_a0_jf_b0_soc;
-		else if (iwl_trans->cfg == &iwl9560_2ac_cfg_qu_b0_jf_b0)
-			iwl_trans->cfg = &iwl9560_2ac_cfg_quz_a0_jf_b0_soc;
-		else if (iwl_trans->cfg == &iwl9560_2ac_160_cfg_qu_b0_jf_b0)
-			iwl_trans->cfg = &iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc;
+		if (cfg == &iwl_ax101_cfg_qu_hr)
+			cfg = &iwl_ax101_cfg_quz_hr;
+		else if (cfg == &iwl_ax201_cfg_qu_hr)
+			cfg = &iwl_ax201_cfg_quz_hr;
+		else if (cfg == &iwl9461_2ac_cfg_qu_b0_jf_b0)
+			cfg = &iwl9461_2ac_cfg_quz_a0_jf_b0_soc;
+		else if (cfg == &iwl9462_2ac_cfg_qu_b0_jf_b0)
+			cfg = &iwl9462_2ac_cfg_quz_a0_jf_b0_soc;
+		else if (cfg == &iwl9560_2ac_cfg_qu_b0_jf_b0)
+			cfg = &iwl9560_2ac_cfg_quz_a0_jf_b0_soc;
+		else if (cfg == &iwl9560_2ac_160_cfg_qu_b0_jf_b0)
+			cfg = &iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc;
 	}
 
 #endif
-- 
2.20.1

[PATCH AUTOSEL 5.4 057/187] iwlwifi: pcie: move power gating workaround earlier in the flow

[Sasha Levin]

From: Luca Coelho <luciano.coelho@intel.com>

[ Upstream commit 0df36b90c47d93295b7e393da2d961b2f3b6cde4 ]

We need to reset the NIC after setting the bits to enable power
gating and that cannot be done too late in the flow otherwise it
cleans other registers and things that were already configured,
causing initialization to fail.

In order to fix this, move the function to the common code in trans.c
so it can be called directly from there at an earlier point, just
after the reset we already do during initialization.

Fixes: 9a47cb988338 ("iwlwifi: pcie: add workaround for power gating in integrated 22000")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205719
Cc: stable@ver.kernel.org # 5.4+
Reported-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../wireless/intel/iwlwifi/pcie/trans-gen2.c  | 25 ----------------
 .../net/wireless/intel/iwlwifi/pcie/trans.c   | 30 +++++++++++++++++++
 2 files changed, 30 insertions(+), 25 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c
index ca3bb4d65b00..df8455f14e4d 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c
@@ -57,24 +57,6 @@
 #include "internal.h"
 #include "fw/dbg.h"
 
-static int iwl_pcie_gen2_force_power_gating(struct iwl_trans *trans)
-{
-	iwl_set_bits_prph(trans, HPM_HIPM_GEN_CFG,
-			  HPM_HIPM_GEN_CFG_CR_FORCE_ACTIVE);
-	udelay(20);
-	iwl_set_bits_prph(trans, HPM_HIPM_GEN_CFG,
-			  HPM_HIPM_GEN_CFG_CR_PG_EN |
-			  HPM_HIPM_GEN_CFG_CR_SLP_EN);
-	udelay(20);
-	iwl_clear_bits_prph(trans, HPM_HIPM_GEN_CFG,
-			    HPM_HIPM_GEN_CFG_CR_FORCE_ACTIVE);
-
-	iwl_trans_sw_reset(trans);
-	iwl_clear_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
-	return 0;
-}
-
 /*
  * Start up NIC's basic functionality after it has been reset
  * (e.g. after platform boot, or shutdown via iwl_pcie_apm_stop())
@@ -110,13 +92,6 @@ int iwl_pcie_gen2_apm_init(struct iwl_trans *trans)
 
 	iwl_pcie_apm_config(trans);
 
-	if (trans->trans_cfg->device_family == IWL_DEVICE_FAMILY_22000 &&
-	    trans->cfg->integrated) {
-		ret = iwl_pcie_gen2_force_power_gating(trans);
-		if (ret)
-			return ret;
-	}
-
 	ret = iwl_finish_nic_init(trans, trans->trans_cfg);
 	if (ret)
 		return ret;
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index 6961f00ff812..d3db38c3095b 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -1783,6 +1783,29 @@ static int iwl_trans_pcie_clear_persistence_bit(struct iwl_trans *trans)
 	return 0;
 }
 
+static int iwl_pcie_gen2_force_power_gating(struct iwl_trans *trans)
+{
+	int ret;
+
+	ret = iwl_finish_nic_init(trans, trans->trans_cfg);
+	if (ret < 0)
+		return ret;
+
+	iwl_set_bits_prph(trans, HPM_HIPM_GEN_CFG,
+			  HPM_HIPM_GEN_CFG_CR_FORCE_ACTIVE);
+	udelay(20);
+	iwl_set_bits_prph(trans, HPM_HIPM_GEN_CFG,
+			  HPM_HIPM_GEN_CFG_CR_PG_EN |
+			  HPM_HIPM_GEN_CFG_CR_SLP_EN);
+	udelay(20);
+	iwl_clear_bits_prph(trans, HPM_HIPM_GEN_CFG,
+			    HPM_HIPM_GEN_CFG_CR_FORCE_ACTIVE);
+
+	iwl_trans_pcie_sw_reset(trans);
+
+	return 0;
+}
+
 static int _iwl_trans_pcie_start_hw(struct iwl_trans *trans)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
@@ -1802,6 +1825,13 @@ static int _iwl_trans_pcie_start_hw(struct iwl_trans *trans)
 
 	iwl_trans_pcie_sw_reset(trans);
 
+	if (trans->trans_cfg->device_family == IWL_DEVICE_FAMILY_22000 &&
+	    trans->cfg->integrated) {
+		err = iwl_pcie_gen2_force_power_gating(trans);
+		if (err)
+			return err;
+	}
+
 	err = iwl_pcie_apm_init(trans);
 	if (err)
 		return err;
-- 
2.20.1

[PATCH AUTOSEL 5.4 058/187] reset: Do not register resource data for missing resets

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit db23808615e29d9a04f96806cac56f78b0fee0ef ]

When an optional reset is not present, __devm_reset_control_get() and
devm_reset_control_array_get() still register resource data to release
the non-existing reset on cleanup, which is futile.

Fix this by skipping NULL reset control pointers.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/reset/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index 3c9a64c1b7a8..f343bd814d32 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -787,7 +787,7 @@ struct reset_control *__devm_reset_control_get(struct device *dev,
 		return ERR_PTR(-ENOMEM);
 
 	rstc = __reset_control_get(dev, id, index, shared, optional, acquired);
-	if (!IS_ERR(rstc)) {
+	if (!IS_ERR_OR_NULL(rstc)) {
 		*ptr = rstc;
 		devres_add(dev, ptr);
 	} else {
@@ -930,7 +930,7 @@ devm_reset_control_array_get(struct device *dev, bool shared, bool optional)
 		return ERR_PTR(-ENOMEM);
 
 	rstc = of_reset_control_array_get(dev->of_node, shared, optional, true);
-	if (IS_ERR(rstc)) {
+	if (IS_ERR_OR_NULL(rstc)) {
 		devres_free(devres);
 		return rstc;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.4 059/187] efi: Don't attempt to map RCI2 config table if it doesn't exist

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit a470552ee8965da0fe6fd4df0aa39c4cda652c7c ]

Commit:

  1c5fecb61255aa12 ("efi: Export Runtime Configuration Interface table to sysfs")

... added support for a Dell specific UEFI configuration table, but
failed to take into account that mapping the table should not be
attempted unless the table actually exists. If it doesn't exist,
the code usually fails silently unless pr_debug() prints are
enabled. However, on 32-bit PAE x86, the splat below is produced due
to the attempt to map the placeholder value EFI_INVALID_TABLE_ADDR
which we use for non-existing UEFI configuration tables, and which
equals ULONG_MAX.

   memremap attempted on mixed range 0x00000000ffffffff size: 0x1e
   WARNING: CPU: 1 PID: 1 at kernel/iomem.c:81 memremap+0x1a3/0x1c0
   Modules linked in:
   CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.2-smp-mine #1
   Hardware name: Hewlett-Packard HP Z400 Workstation/0B4Ch, BIOS 786G3 v03.61 03/05/2018
   EIP: memremap+0x1a3/0x1c0
  ...
   Call Trace:
    ? map_properties+0x473/0x473
    ? efi_rci2_sysfs_init+0x2c/0x154
    ? map_properties+0x473/0x473
    ? do_one_initcall+0x49/0x1d4
    ? parse_args+0x1e8/0x2a0
    ? do_early_param+0x7a/0x7a
    ? kernel_init_freeable+0x139/0x1c2
    ? rest_init+0x8e/0x8e
    ? kernel_init+0xd/0xf2
    ? ret_from_fork+0x2e/0x38

Fix this by checking whether the table exists before attempting to map it.

Reported-by: Richard Narron <comet.berkeley@gmail.com>
Tested-by: Richard Narron <comet.berkeley@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Fixes: 1c5fecb61255aa12 ("efi: Export Runtime Configuration Interface table to sysfs")
Link: https://lkml.kernel.org/r/20191210090945.11501-2-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/rci2-table.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/firmware/efi/rci2-table.c b/drivers/firmware/efi/rci2-table.c
index 76b0c354a027..de1a9a1f9f14 100644
--- a/drivers/firmware/efi/rci2-table.c
+++ b/drivers/firmware/efi/rci2-table.c
@@ -81,6 +81,9 @@ static int __init efi_rci2_sysfs_init(void)
 	struct kobject *tables_kobj;
 	int ret = -ENOMEM;
 
+	if (rci2_table_phys == EFI_INVALID_TABLE_ADDR)
+		return 0;
+
 	rci2_base = memremap(rci2_table_phys,
 			     sizeof(struct rci2_table_global_hdr),
 			     MEMREMAP_WB);
-- 
2.20.1

[PATCH AUTOSEL 5.4 060/187] ASoC: topology: Check return value for snd_soc_add_dai_link()

[Sasha Levin]

From: Dragos Tarcatu <dragos_tarcatu@mentor.com>

[ Upstream commit 76d2703649321c296df7ec0dafd50add96215de4 ]

snd_soc_add_dai_link() might fail. This situation occurs for
instance in a very specific use case where a PCM device and a
Back End DAI link are given identical names in the topology.
When this happens, soc_new_pcm_runtime() fails and then
snd_soc_add_dai_link() returns -ENOMEM when called from
soc_tplg_fe_link_create(). Because of that, the link will not
get added into the card list, so any attempt to remove it later
ends up in a panic.

Fix that by checking the return status and free the memory in case
of an error.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 0fd032914a31..c92e360d27b8 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -1918,11 +1918,13 @@ static int soc_tplg_fe_link_create(struct soc_tplg *tplg,
 	ret = soc_tplg_dai_link_load(tplg, link, NULL);
 	if (ret < 0) {
 		dev_err(tplg->comp->dev, "ASoC: FE link loading failed\n");
-		kfree(link->name);
-		kfree(link->stream_name);
-		kfree(link->cpus->dai_name);
-		kfree(link);
-		return ret;
+		goto err;
+	}
+
+	ret = snd_soc_add_dai_link(tplg->comp->card, link);
+	if (ret < 0) {
+		dev_err(tplg->comp->dev, "ASoC: adding FE link failed\n");
+		goto err;
 	}
 
 	link->dobj.index = tplg->index;
@@ -1930,8 +1932,13 @@ static int soc_tplg_fe_link_create(struct soc_tplg *tplg,
 	link->dobj.type = SND_SOC_DOBJ_DAI_LINK;
 	list_add(&link->dobj.list, &tplg->comp->dobj_list);
 
-	snd_soc_add_dai_link(tplg->comp->card, link);
 	return 0;
+err:
+	kfree(link->name);
+	kfree(link->stream_name);
+	kfree(link->cpus->dai_name);
+	kfree(link);
+	return ret;
 }
 
 /* create a FE DAI and DAI link from the PCM object */
-- 
2.20.1

[alsa-devel] [PATCH AUTOSEL 5.4 060/187] ASoC: topology: Check return value for snd_soc_add_dai_link()

[Sasha Levin]

From: Dragos Tarcatu <dragos_tarcatu@mentor.com>

[ Upstream commit 76d2703649321c296df7ec0dafd50add96215de4 ]

snd_soc_add_dai_link() might fail. This situation occurs for
instance in a very specific use case where a PCM device and a
Back End DAI link are given identical names in the topology.
When this happens, soc_new_pcm_runtime() fails and then
snd_soc_add_dai_link() returns -ENOMEM when called from
soc_tplg_fe_link_create(). Because of that, the link will not
get added into the card list, so any attempt to remove it later
ends up in a panic.

Fix that by checking the return status and free the memory in case
of an error.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 0fd032914a31..c92e360d27b8 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -1918,11 +1918,13 @@ static int soc_tplg_fe_link_create(struct soc_tplg *tplg,
 	ret = soc_tplg_dai_link_load(tplg, link, NULL);
 	if (ret < 0) {
 		dev_err(tplg->comp->dev, "ASoC: FE link loading failed\n");
-		kfree(link->name);
-		kfree(link->stream_name);
-		kfree(link->cpus->dai_name);
-		kfree(link);
-		return ret;
+		goto err;
+	}
+
+	ret = snd_soc_add_dai_link(tplg->comp->card, link);
+	if (ret < 0) {
+		dev_err(tplg->comp->dev, "ASoC: adding FE link failed\n");
+		goto err;
 	}
 
 	link->dobj.index = tplg->index;
@@ -1930,8 +1932,13 @@ static int soc_tplg_fe_link_create(struct soc_tplg *tplg,
 	link->dobj.type = SND_SOC_DOBJ_DAI_LINK;
 	list_add(&link->dobj.list, &tplg->comp->dobj_list);
 
-	snd_soc_add_dai_link(tplg->comp->card, link);
 	return 0;
+err:
+	kfree(link->name);
+	kfree(link->stream_name);
+	kfree(link->cpus->dai_name);
+	kfree(link);
+	return ret;
 }
 
 /* create a FE DAI and DAI link from the PCM object */
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[PATCH AUTOSEL 5.4 061/187] ASoC: topology: Check return value for soc_tplg_pcm_create()

[Sasha Levin]

From: Dragos Tarcatu <dragos_tarcatu@mentor.com>

[ Upstream commit a3039aef52d9ffeb67e9211899cd3e8a2953a01f ]

The return value of soc_tplg_pcm_create() is currently not checked
in soc_tplg_pcm_elems_load(). If an error is to occur there, the
topology ignores it and continues loading.

Fix that by checking the status and rejecting the topology on error.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index c92e360d27b8..fd2d22ddc81b 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2031,6 +2031,7 @@ static int soc_tplg_pcm_elems_load(struct soc_tplg *tplg,
 	int size;
 	int i;
 	bool abi_match;
+	int ret;
 
 	count = le32_to_cpu(hdr->count);
 
@@ -2072,7 +2073,12 @@ static int soc_tplg_pcm_elems_load(struct soc_tplg *tplg,
 		}
 
 		/* create the FE DAIs and DAI links */
-		soc_tplg_pcm_create(tplg, _pcm);
+		ret = soc_tplg_pcm_create(tplg, _pcm);
+		if (ret < 0) {
+			if (!abi_match)
+				kfree(_pcm);
+			return ret;
+		}
 
 		/* offset by version-specific struct size and
 		 * real priv data size
-- 
2.20.1

[alsa-devel] [PATCH AUTOSEL 5.4 061/187] ASoC: topology: Check return value for soc_tplg_pcm_create()

[Sasha Levin]

From: Dragos Tarcatu <dragos_tarcatu@mentor.com>

[ Upstream commit a3039aef52d9ffeb67e9211899cd3e8a2953a01f ]

The return value of soc_tplg_pcm_create() is currently not checked
in soc_tplg_pcm_elems_load(). If an error is to occur there, the
topology ignores it and continues loading.

Fix that by checking the status and rejecting the topology on error.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index c92e360d27b8..fd2d22ddc81b 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2031,6 +2031,7 @@ static int soc_tplg_pcm_elems_load(struct soc_tplg *tplg,
 	int size;
 	int i;
 	bool abi_match;
+	int ret;
 
 	count = le32_to_cpu(hdr->count);
 
@@ -2072,7 +2073,12 @@ static int soc_tplg_pcm_elems_load(struct soc_tplg *tplg,
 		}
 
 		/* create the FE DAIs and DAI links */
-		soc_tplg_pcm_create(tplg, _pcm);
+		ret = soc_tplg_pcm_create(tplg, _pcm);
+		if (ret < 0) {
+			if (!abi_match)
+				kfree(_pcm);
+			return ret;
+		}
 
 		/* offset by version-specific struct size and
 		 * real priv data size
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[PATCH AUTOSEL 5.4 062/187] ASoC: SOF: loader: snd_sof_fw_parse_ext_data log warning on unknown header

[Sasha Levin]

From: Karol Trzcinski <karolx.trzcinski@linux.intel.com>

[ Upstream commit 8edc95667646a75f0fc97e08ecb180581fdff300 ]

Added warning log when found some unknown FW boot ext header,
to improve debuggability.

Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/loader.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/sof/loader.c b/sound/soc/sof/loader.c
index 9a9a381a908d..a041adf0669d 100644
--- a/sound/soc/sof/loader.c
+++ b/sound/soc/sof/loader.c
@@ -66,6 +66,8 @@ int snd_sof_fw_parse_ext_data(struct snd_sof_dev *sdev, u32 bar, u32 offset)
 			ret = get_ext_windows(sdev, ext_hdr);
 			break;
 		default:
+			dev_warn(sdev->dev, "warning: unknown ext header type %d size 0x%x\n",
+				 ext_hdr->type, ext_hdr->hdr.size);
 			break;
 		}
 
-- 
2.20.1

[alsa-devel] [PATCH AUTOSEL 5.4 062/187] ASoC: SOF: loader: snd_sof_fw_parse_ext_data log warning on unknown header

[Sasha Levin]

From: Karol Trzcinski <karolx.trzcinski@linux.intel.com>

[ Upstream commit 8edc95667646a75f0fc97e08ecb180581fdff300 ]

Added warning log when found some unknown FW boot ext header,
to improve debuggability.

Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/loader.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/sof/loader.c b/sound/soc/sof/loader.c
index 9a9a381a908d..a041adf0669d 100644
--- a/sound/soc/sof/loader.c
+++ b/sound/soc/sof/loader.c
@@ -66,6 +66,8 @@ int snd_sof_fw_parse_ext_data(struct snd_sof_dev *sdev, u32 bar, u32 offset)
 			ret = get_ext_windows(sdev, ext_hdr);
 			break;
 		default:
+			dev_warn(sdev->dev, "warning: unknown ext header type %d size 0x%x\n",
+				 ext_hdr->type, ext_hdr->hdr.size);
 			break;
 		}
 
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[PATCH AUTOSEL 5.4 063/187] ASoC: SOF: Intel: split cht and byt debug window sizes

[Sasha Levin]

From: Curtis Malainey <cujomalainey@chromium.org>

[ Upstream commit f84337c3fb8ff4d533ccbed0d2db4e8587d0ff58 ]

Turns out SSP 3-5 are only available on cht, to avoid dumping on
undefined registers let's split the definition.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/intel/byt.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/sound/soc/sof/intel/byt.c b/sound/soc/sof/intel/byt.c
index a1e514f71739..41008c974ac6 100644
--- a/sound/soc/sof/intel/byt.c
+++ b/sound/soc/sof/intel/byt.c
@@ -24,7 +24,8 @@
 #define DRAM_OFFSET		0x100000
 #define DRAM_SIZE		(160 * 1024)
 #define SHIM_OFFSET		0x140000
-#define SHIM_SIZE		0x100
+#define SHIM_SIZE_BYT		0x100
+#define SHIM_SIZE_CHT		0x118
 #define MBOX_OFFSET		0x144000
 #define MBOX_SIZE		0x1000
 #define EXCEPT_OFFSET		0x800
@@ -75,7 +76,7 @@ static const struct snd_sof_debugfs_map byt_debugfs[] = {
 	 SOF_DEBUGFS_ACCESS_D0_ONLY},
 	{"dram", BYT_DSP_BAR, DRAM_OFFSET, DRAM_SIZE,
 	 SOF_DEBUGFS_ACCESS_D0_ONLY},
-	{"shim", BYT_DSP_BAR, SHIM_OFFSET, SHIM_SIZE,
+	{"shim", BYT_DSP_BAR, SHIM_OFFSET, SHIM_SIZE_BYT,
 	 SOF_DEBUGFS_ACCESS_ALWAYS},
 };
 
@@ -102,7 +103,7 @@ static const struct snd_sof_debugfs_map cht_debugfs[] = {
 	 SOF_DEBUGFS_ACCESS_D0_ONLY},
 	{"dram", BYT_DSP_BAR, DRAM_OFFSET, DRAM_SIZE,
 	 SOF_DEBUGFS_ACCESS_D0_ONLY},
-	{"shim", BYT_DSP_BAR, SHIM_OFFSET, SHIM_SIZE,
+	{"shim", BYT_DSP_BAR, SHIM_OFFSET, SHIM_SIZE_CHT,
 	 SOF_DEBUGFS_ACCESS_ALWAYS},
 };
 
-- 
2.20.1

[alsa-devel] [PATCH AUTOSEL 5.4 063/187] ASoC: SOF: Intel: split cht and byt debug window sizes

[Sasha Levin]

From: Curtis Malainey <cujomalainey@chromium.org>

[ Upstream commit f84337c3fb8ff4d533ccbed0d2db4e8587d0ff58 ]

Turns out SSP 3-5 are only available on cht, to avoid dumping on
undefined registers let's split the definition.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/intel/byt.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/sound/soc/sof/intel/byt.c b/sound/soc/sof/intel/byt.c
index a1e514f71739..41008c974ac6 100644
--- a/sound/soc/sof/intel/byt.c
+++ b/sound/soc/sof/intel/byt.c
@@ -24,7 +24,8 @@
 #define DRAM_OFFSET		0x100000
 #define DRAM_SIZE		(160 * 1024)
 #define SHIM_OFFSET		0x140000
-#define SHIM_SIZE		0x100
+#define SHIM_SIZE_BYT		0x100
+#define SHIM_SIZE_CHT		0x118
 #define MBOX_OFFSET		0x144000
 #define MBOX_SIZE		0x1000
 #define EXCEPT_OFFSET		0x800
@@ -75,7 +76,7 @@ static const struct snd_sof_debugfs_map byt_debugfs[] = {
 	 SOF_DEBUGFS_ACCESS_D0_ONLY},
 	{"dram", BYT_DSP_BAR, DRAM_OFFSET, DRAM_SIZE,
 	 SOF_DEBUGFS_ACCESS_D0_ONLY},
-	{"shim", BYT_DSP_BAR, SHIM_OFFSET, SHIM_SIZE,
+	{"shim", BYT_DSP_BAR, SHIM_OFFSET, SHIM_SIZE_BYT,
 	 SOF_DEBUGFS_ACCESS_ALWAYS},
 };
 
@@ -102,7 +103,7 @@ static const struct snd_sof_debugfs_map cht_debugfs[] = {
 	 SOF_DEBUGFS_ACCESS_D0_ONLY},
 	{"dram", BYT_DSP_BAR, DRAM_OFFSET, DRAM_SIZE,
 	 SOF_DEBUGFS_ACCESS_D0_ONLY},
-	{"shim", BYT_DSP_BAR, SHIM_OFFSET, SHIM_SIZE,
+	{"shim", BYT_DSP_BAR, SHIM_OFFSET, SHIM_SIZE_CHT,
 	 SOF_DEBUGFS_ACCESS_ALWAYS},
 };
 
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[PATCH AUTOSEL 5.4 064/187] ARM: dts: am335x-sancloud-bbe: fix phy mode

[Sasha Levin]

From: Mans Rullgard <mans@mansr.com>

[ Upstream commit c842b8c4ff9859f750447f3ca08f64b2ed23cebc ]

The phy mode should be rgmii-id.  For some reason, it used to work with
rgmii-txid but doesn't any more.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am335x-sancloud-bbe.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
index 8678e6e35493..e5fdb7abb0d5 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -108,7 +108,7 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 };
 
 &i2c0 {
-- 
2.20.1

[PATCH AUTOSEL 5.4 065/187] ARM: omap2plus_defconfig: Add back DEBUG_FS

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit e00b59d30506dc9ef91caf2f3c584209cc9f61e4 ]

Commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency")
removed select for DEBUG_FS but we still need it at least for enabling
deeper idle states for the SoCs.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/configs/omap2plus_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 40d7f1a4fc45..4ec69fb8a698 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -552,5 +552,6 @@ CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_INFO_SPLIT=y
 CONFIG_DEBUG_INFO_DWARF4=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-- 
2.20.1

[PATCH AUTOSEL 5.4 065/187] ARM: omap2plus_defconfig: Add back DEBUG_FS

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit e00b59d30506dc9ef91caf2f3c584209cc9f61e4 ]

Commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency")
removed select for DEBUG_FS but we still need it at least for enabling
deeper idle states for the SoCs.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/configs/omap2plus_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 40d7f1a4fc45..4ec69fb8a698 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -552,5 +552,6 @@ CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_INFO_SPLIT=y
 CONFIG_DEBUG_INFO_DWARF4=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 066/187] ARM: dts: bcm283x: Fix critical trip point

[Sasha Levin]

From: Stefan Wahren <wahrenst@gmx.net>

[ Upstream commit 30e647a764d446723a7e0fb08d209e0104f16173 ]

During definition of the CPU thermal zone of BCM283x SoC family there
was a misunderstanding of the meaning "criticial trip point" and the
thermal throttling range of the VideoCore firmware. The latter one takes
effect when the core temperature is at least 85 degree celsius or higher

So the current critical trip point doesn't make sense, because the
thermal shutdown appears before the firmware has a chance to throttle
the ARM core(s).

Fix these unwanted shutdowns by increasing the critical trip point
to a value which shouldn't be reached with working thermal throttling.

Fixes: 0fe4d2181cc4 ("ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm283x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 2d191fcbc2cc..90125ce19a1b 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -40,7 +40,7 @@
 
 			trips {
 				cpu-crit {
-					temperature	= <80000>;
+					temperature	= <90000>;
 					hysteresis	= <0>;
 					type		= "critical";
 				};
-- 
2.20.1

[PATCH AUTOSEL 5.4 067/187] bnxt_en: Fix MSIX request logic for RDMA driver.

[Sasha Levin]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit 0c722ec0a289c7f6b53f89bad1cfb7c4db3f7a62 ]

The logic needs to check both bp->total_irqs and the reserved IRQs in
hw_resc->resv_irqs if applicable and see if both are enough to cover
the L2 and RDMA requested vectors.  The current code is only checking
bp->total_irqs and can fail in some code paths, such as the TX timeout
code path with the RDMA driver requesting vectors after recovery.  In
this code path, we have not reserved enough MSIX resources for the
RDMA driver yet.

Fixes: 75720e6323a1 ("bnxt_en: Keep track of reserved IRQs.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
index b2c160947fc8..30816ec4fa91 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
@@ -113,8 +113,10 @@ static int bnxt_req_msix_vecs(struct bnxt_en_dev *edev, int ulp_id,
 {
 	struct net_device *dev = edev->net;
 	struct bnxt *bp = netdev_priv(dev);
+	struct bnxt_hw_resc *hw_resc;
 	int max_idx, max_cp_rings;
 	int avail_msix, idx;
+	int total_vecs;
 	int rc = 0;
 
 	ASSERT_RTNL();
@@ -142,7 +144,10 @@ static int bnxt_req_msix_vecs(struct bnxt_en_dev *edev, int ulp_id,
 	}
 	edev->ulp_tbl[ulp_id].msix_base = idx;
 	edev->ulp_tbl[ulp_id].msix_requested = avail_msix;
-	if (bp->total_irqs < (idx + avail_msix)) {
+	hw_resc = &bp->hw_resc;
+	total_vecs = idx + avail_msix;
+	if (bp->total_irqs < total_vecs ||
+	    (BNXT_NEW_RM(bp) && hw_resc->resv_irqs < total_vecs)) {
 		if (netif_running(dev)) {
 			bnxt_close_nic(bp, true, false);
 			rc = bnxt_open_nic(bp, true, false);
@@ -156,7 +161,6 @@ static int bnxt_req_msix_vecs(struct bnxt_en_dev *edev, int ulp_id,
 	}
 
 	if (BNXT_NEW_RM(bp)) {
-		struct bnxt_hw_resc *hw_resc = &bp->hw_resc;
 		int resv_msix;
 
 		resv_msix = hw_resc->resv_irqs - bp->cp_nr_rings;
-- 
2.20.1

[PATCH AUTOSEL 5.4 068/187] bnxt_en: Return error if FW returns more data than dump length

[Sasha Levin]

From: Vasundhara Volam <vasundhara-v.volam@broadcom.com>

[ Upstream commit c74751f4c39232c31214ec6a3bc1c7e62f5c728b ]

If any change happened in the configuration of VF in VM while
collecting live dump, there could be a race and firmware can return
more data than allocated dump length. Fix it by keeping track of
the accumulated core dump length copied so far and abort the copy
with error code if the next chunk of core dump will exceed the
original dump length.

Fixes: 6c5657d085ae ("bnxt_en: Add support for ethtool get dump.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 38 +++++++++++++++----
 .../net/ethernet/broadcom/bnxt/bnxt_ethtool.h |  4 ++
 2 files changed, 34 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 51c140476717..a3dcd11bfd98 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -3062,8 +3062,15 @@ static int bnxt_hwrm_dbg_dma_data(struct bnxt *bp, void *msg, int msg_len,
 			}
 		}
 
-		if (info->dest_buf)
-			memcpy(info->dest_buf + off, dma_buf, len);
+		if (info->dest_buf) {
+			if ((info->seg_start + off + len) <=
+			    BNXT_COREDUMP_BUF_LEN(info->buf_len)) {
+				memcpy(info->dest_buf + off, dma_buf, len);
+			} else {
+				rc = -ENOBUFS;
+				break;
+			}
+		}
 
 		if (cmn_req->req_type ==
 				cpu_to_le16(HWRM_DBG_COREDUMP_RETRIEVE))
@@ -3117,7 +3124,7 @@ static int bnxt_hwrm_dbg_coredump_initiate(struct bnxt *bp, u16 component_id,
 
 static int bnxt_hwrm_dbg_coredump_retrieve(struct bnxt *bp, u16 component_id,
 					   u16 segment_id, u32 *seg_len,
-					   void *buf, u32 offset)
+					   void *buf, u32 buf_len, u32 offset)
 {
 	struct hwrm_dbg_coredump_retrieve_input req = {0};
 	struct bnxt_hwrm_dbg_dma_info info = {NULL};
@@ -3132,8 +3139,11 @@ static int bnxt_hwrm_dbg_coredump_retrieve(struct bnxt *bp, u16 component_id,
 				seq_no);
 	info.data_len_off = offsetof(struct hwrm_dbg_coredump_retrieve_output,
 				     data_len);
-	if (buf)
+	if (buf) {
 		info.dest_buf = buf + offset;
+		info.buf_len = buf_len;
+		info.seg_start = offset;
+	}
 
 	rc = bnxt_hwrm_dbg_dma_data(bp, &req, sizeof(req), &info);
 	if (!rc)
@@ -3223,14 +3233,17 @@ bnxt_fill_coredump_record(struct bnxt *bp, struct bnxt_coredump_record *record,
 static int bnxt_get_coredump(struct bnxt *bp, void *buf, u32 *dump_len)
 {
 	u32 ver_get_resp_len = sizeof(struct hwrm_ver_get_output);
+	u32 offset = 0, seg_hdr_len, seg_record_len, buf_len = 0;
 	struct coredump_segment_record *seg_record = NULL;
-	u32 offset = 0, seg_hdr_len, seg_record_len;
 	struct bnxt_coredump_segment_hdr seg_hdr;
 	struct bnxt_coredump coredump = {NULL};
 	time64_t start_time;
 	u16 start_utc;
 	int rc = 0, i;
 
+	if (buf)
+		buf_len = *dump_len;
+
 	start_time = ktime_get_real_seconds();
 	start_utc = sys_tz.tz_minuteswest * 60;
 	seg_hdr_len = sizeof(seg_hdr);
@@ -3263,6 +3276,12 @@ static int bnxt_get_coredump(struct bnxt *bp, void *buf, u32 *dump_len)
 		u32 duration = 0, seg_len = 0;
 		unsigned long start, end;
 
+		if (buf && ((offset + seg_hdr_len) >
+			    BNXT_COREDUMP_BUF_LEN(buf_len))) {
+			rc = -ENOBUFS;
+			goto err;
+		}
+
 		start = jiffies;
 
 		rc = bnxt_hwrm_dbg_coredump_initiate(bp, comp_id, seg_id);
@@ -3275,9 +3294,11 @@ static int bnxt_get_coredump(struct bnxt *bp, void *buf, u32 *dump_len)
 
 		/* Write segment data into the buffer */
 		rc = bnxt_hwrm_dbg_coredump_retrieve(bp, comp_id, seg_id,
-						     &seg_len, buf,
+						     &seg_len, buf, buf_len,
 						     offset + seg_hdr_len);
-		if (rc)
+		if (rc && rc == -ENOBUFS)
+			goto err;
+		else if (rc)
 			netdev_err(bp->dev,
 				   "Failed to retrieve coredump for seg = %d\n",
 				   seg_record->segment_id);
@@ -3307,7 +3328,8 @@ static int bnxt_get_coredump(struct bnxt *bp, void *buf, u32 *dump_len)
 					  rc);
 	kfree(coredump.data);
 	*dump_len += sizeof(struct bnxt_coredump_record);
-
+	if (rc == -ENOBUFS)
+		netdev_err(bp->dev, "Firmware returned large coredump buffer");
 	return rc;
 }
 
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
index b5b65b3f8534..3998f6e809a9 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
@@ -31,6 +31,8 @@ struct bnxt_coredump {
 	u16		total_segs;
 };
 
+#define BNXT_COREDUMP_BUF_LEN(len) ((len) - sizeof(struct bnxt_coredump_record))
+
 struct bnxt_hwrm_dbg_dma_info {
 	void *dest_buf;
 	int dest_buf_size;
@@ -38,6 +40,8 @@ struct bnxt_hwrm_dbg_dma_info {
 	u16 seq_off;
 	u16 data_len_off;
 	u16 segs;
+	u32 seg_start;
+	u32 buf_len;
 };
 
 struct hwrm_dbg_cmn_input {
-- 
2.20.1

[PATCH AUTOSEL 5.4 068/187] bnxt_en: Return error if FW returns more data than dump length

[Sasha Levin]

From: Vasundhara Volam <vasundhara-v.volam@broadcom.com>

[ Upstream commit c74751f4c39232c31214ec6a3bc1c7e62f5c728b ]

If any change happened in the configuration of VF in VM while
collecting live dump, there could be a race and firmware can return
more data than allocated dump length. Fix it by keeping track of
the accumulated core dump length copied so far and abort the copy
with error code if the next chunk of core dump will exceed the
original dump length.

Fixes: 6c5657d085ae ("bnxt_en: Add support for ethtool get dump.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 38 +++++++++++++++----
 .../net/ethernet/broadcom/bnxt/bnxt_ethtool.h |  4 ++
 2 files changed, 34 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 51c140476717..a3dcd11bfd98 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -3062,8 +3062,15 @@ static int bnxt_hwrm_dbg_dma_data(struct bnxt *bp, void *msg, int msg_len,
 			}
 		}
 
-		if (info->dest_buf)
-			memcpy(info->dest_buf + off, dma_buf, len);
+		if (info->dest_buf) {
+			if ((info->seg_start + off + len) <=
+			    BNXT_COREDUMP_BUF_LEN(info->buf_len)) {
+				memcpy(info->dest_buf + off, dma_buf, len);
+			} else {
+				rc = -ENOBUFS;
+				break;
+			}
+		}
 
 		if (cmn_req->req_type ==
 				cpu_to_le16(HWRM_DBG_COREDUMP_RETRIEVE))
@@ -3117,7 +3124,7 @@ static int bnxt_hwrm_dbg_coredump_initiate(struct bnxt *bp, u16 component_id,
 
 static int bnxt_hwrm_dbg_coredump_retrieve(struct bnxt *bp, u16 component_id,
 					   u16 segment_id, u32 *seg_len,
-					   void *buf, u32 offset)
+					   void *buf, u32 buf_len, u32 offset)
 {
 	struct hwrm_dbg_coredump_retrieve_input req = {0};
 	struct bnxt_hwrm_dbg_dma_info info = {NULL};
@@ -3132,8 +3139,11 @@ static int bnxt_hwrm_dbg_coredump_retrieve(struct bnxt *bp, u16 component_id,
 				seq_no);
 	info.data_len_off = offsetof(struct hwrm_dbg_coredump_retrieve_output,
 				     data_len);
-	if (buf)
+	if (buf) {
 		info.dest_buf = buf + offset;
+		info.buf_len = buf_len;
+		info.seg_start = offset;
+	}
 
 	rc = bnxt_hwrm_dbg_dma_data(bp, &req, sizeof(req), &info);
 	if (!rc)
@@ -3223,14 +3233,17 @@ bnxt_fill_coredump_record(struct bnxt *bp, struct bnxt_coredump_record *record,
 static int bnxt_get_coredump(struct bnxt *bp, void *buf, u32 *dump_len)
 {
 	u32 ver_get_resp_len = sizeof(struct hwrm_ver_get_output);
+	u32 offset = 0, seg_hdr_len, seg_record_len, buf_len = 0;
 	struct coredump_segment_record *seg_record = NULL;
-	u32 offset = 0, seg_hdr_len, seg_record_len;
 	struct bnxt_coredump_segment_hdr seg_hdr;
 	struct bnxt_coredump coredump = {NULL};
 	time64_t start_time;
 	u16 start_utc;
 	int rc = 0, i;
 
+	if (buf)
+		buf_len = *dump_len;
+
 	start_time = ktime_get_real_seconds();
 	start_utc = sys_tz.tz_minuteswest * 60;
 	seg_hdr_len = sizeof(seg_hdr);
@@ -3263,6 +3276,12 @@ static int bnxt_get_coredump(struct bnxt *bp, void *buf, u32 *dump_len)
 		u32 duration = 0, seg_len = 0;
 		unsigned long start, end;
 
+		if (buf && ((offset + seg_hdr_len) >
+			    BNXT_COREDUMP_BUF_LEN(buf_len))) {
+			rc = -ENOBUFS;
+			goto err;
+		}
+
 		start = jiffies;
 
 		rc = bnxt_hwrm_dbg_coredump_initiate(bp, comp_id, seg_id);
@@ -3275,9 +3294,11 @@ static int bnxt_get_coredump(struct bnxt *bp, void *buf, u32 *dump_len)
 
 		/* Write segment data into the buffer */
 		rc = bnxt_hwrm_dbg_coredump_retrieve(bp, comp_id, seg_id,
-						     &seg_len, buf,
+						     &seg_len, buf, buf_len,
 						     offset + seg_hdr_len);
-		if (rc)
+		if (rc && rc == -ENOBUFS)
+			goto err;
+		else if (rc)
 			netdev_err(bp->dev,
 				   "Failed to retrieve coredump for seg = %d\n",
 				   seg_record->segment_id);
@@ -3307,7 +3328,8 @@ static int bnxt_get_coredump(struct bnxt *bp, void *buf, u32 *dump_len)
 					  rc);
 	kfree(coredump.data);
 	*dump_len += sizeof(struct bnxt_coredump_record);
-
+	if (rc == -ENOBUFS)
+		netdev_err(bp->dev, "Firmware returned large coredump buffer");
 	return rc;
 }
 
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
index b5b65b3f8534..3998f6e809a9 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
@@ -31,6 +31,8 @@ struct bnxt_coredump {
 	u16		total_segs;
 };
 
+#define BNXT_COREDUMP_BUF_LEN(len) ((len) - sizeof(struct bnxt_coredump_record))
+
 struct bnxt_hwrm_dbg_dma_info {
 	void *dest_buf;
 	int dest_buf_size;
@@ -38,6 +40,8 @@ struct bnxt_hwrm_dbg_dma_info {
 	u16 seq_off;
 	u16 data_len_off;
 	u16 segs;
+	u32 seg_start;
+	u32 buf_len;
 };
 
 struct hwrm_dbg_cmn_input {
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 069/187] net: ena: fix napi handler misbehavior when the napi budget is zero

[Sasha Levin]

From: Netanel Belgazal <netanel@amazon.com>

[ Upstream commit 24dee0c7478d1a1e00abdf5625b7f921467325dc ]

In netpoll the napi handler could be called with budget equal to zero.
Current ENA napi handler doesn't take that into consideration.

The napi handler handles Rx packets in a do-while loop.
Currently, the budget check happens only after decrementing the
budget, therefore the napi handler, in rare cases, could run over
MAX_INT packets.

In addition to that, this moves all budget related variables to int
calculation and stop mixing u32 to avoid ambiguity

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_netdev.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index c487d2a7d6dd..b4a145220aba 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -1238,8 +1238,8 @@ static int ena_io_poll(struct napi_struct *napi, int budget)
 	struct ena_napi *ena_napi = container_of(napi, struct ena_napi, napi);
 	struct ena_ring *tx_ring, *rx_ring;
 
-	u32 tx_work_done;
-	u32 rx_work_done;
+	int tx_work_done;
+	int rx_work_done = 0;
 	int tx_budget;
 	int napi_comp_call = 0;
 	int ret;
@@ -1256,7 +1256,11 @@ static int ena_io_poll(struct napi_struct *napi, int budget)
 	}
 
 	tx_work_done = ena_clean_tx_irq(tx_ring, tx_budget);
-	rx_work_done = ena_clean_rx_irq(rx_ring, napi, budget);
+	/* On netpoll the budget is zero and the handler should only clean the
+	 * tx completions.
+	 */
+	if (likely(budget))
+		rx_work_done = ena_clean_rx_irq(rx_ring, napi, budget);
 
 	/* If the device is about to reset or down, avoid unmask
 	 * the interrupt and return 0 so NAPI won't reschedule
-- 
2.20.1

[PATCH AUTOSEL 5.4 070/187] arm64: dts: ls1028a: fix typo in TMU calibration data

[Sasha Levin]

From: Michael Walle <michael@walle.cc>

[ Upstream commit 961f8209c8d5ef5d33da42e6656d7c8179899da0 ]

The temperature sensor may jump backwards because there is a wrong
calibration value. Both values have to be monotonically increasing.
Fix it.

This was tested on a custom board.

Fixes: 571cebfe8e2b ("arm64: dts: ls1028a: Add Thermal Monitor Unit node")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 72b9a75976a1..c7dae9ec17da 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -567,7 +567,7 @@
 					       0x00010004 0x0000003d
 					       0x00010005 0x00000045
 					       0x00010006 0x0000004d
-					       0x00010007 0x00000045
+					       0x00010007 0x00000055
 					       0x00010008 0x0000005e
 					       0x00010009 0x00000066
 					       0x0001000a 0x0000006e
-- 
2.20.1

[PATCH AUTOSEL 5.4 070/187] arm64: dts: ls1028a: fix typo in TMU calibration data

[Sasha Levin]

From: Michael Walle <michael@walle.cc>

[ Upstream commit 961f8209c8d5ef5d33da42e6656d7c8179899da0 ]

The temperature sensor may jump backwards because there is a wrong
calibration value. Both values have to be monotonically increasing.
Fix it.

This was tested on a custom board.

Fixes: 571cebfe8e2b ("arm64: dts: ls1028a: Add Thermal Monitor Unit node")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 72b9a75976a1..c7dae9ec17da 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -567,7 +567,7 @@
 					       0x00010004 0x0000003d
 					       0x00010005 0x00000045
 					       0x00010006 0x0000004d
-					       0x00010007 0x00000045
+					       0x00010007 0x00000055
 					       0x00010008 0x0000005e
 					       0x00010009 0x00000066
 					       0x0001000a 0x0000006e
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 071/187] bpf, riscv: Limit to 33 tail calls

[Sasha Levin]

From: Paul Chaignon <paul.chaignon@orange.com>

[ Upstream commit 96bc4432f5ade1045521f3b247f516b1478166bd ]

All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime.  In addition, a test was recently added, in tailcalls2,
to check this limit.

This patch updates the tail call limit in RISC-V's JIT compiler to allow
33 tail calls.  I tested it using the above selftest on an emulated
RISCV64.

Fixes: 2353ecc6f91f ("bpf, riscv: add BPF JIT for RV64G")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/966fe384383bf23a0ee1efe8d7291c78a3fb832b.1575916815.git.paul.chaignon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/net/bpf_jit_comp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/net/bpf_jit_comp.c b/arch/riscv/net/bpf_jit_comp.c
index 5451ef3845f2..7fbf56aab661 100644
--- a/arch/riscv/net/bpf_jit_comp.c
+++ b/arch/riscv/net/bpf_jit_comp.c
@@ -631,14 +631,14 @@ static int emit_bpf_tail_call(int insn, struct rv_jit_context *ctx)
 		return -1;
 	emit(rv_bgeu(RV_REG_A2, RV_REG_T1, off >> 1), ctx);
 
-	/* if (--TCC < 0)
+	/* if (TCC-- < 0)
 	 *     goto out;
 	 */
 	emit(rv_addi(RV_REG_T1, tcc, -1), ctx);
 	off = (tc_ninsn - (ctx->ninsns - start_insn)) << 2;
 	if (is_13b_check(off, insn))
 		return -1;
-	emit(rv_blt(RV_REG_T1, RV_REG_ZERO, off >> 1), ctx);
+	emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx);
 
 	/* prog = array->ptrs[index];
 	 * if (!prog)
-- 
2.20.1

[PATCH AUTOSEL 5.4 071/187] bpf, riscv: Limit to 33 tail calls

[Sasha Levin]

From: Paul Chaignon <paul.chaignon@orange.com>

[ Upstream commit 96bc4432f5ade1045521f3b247f516b1478166bd ]

All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime.  In addition, a test was recently added, in tailcalls2,
to check this limit.

This patch updates the tail call limit in RISC-V's JIT compiler to allow
33 tail calls.  I tested it using the above selftest on an emulated
RISCV64.

Fixes: 2353ecc6f91f ("bpf, riscv: add BPF JIT for RV64G")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/966fe384383bf23a0ee1efe8d7291c78a3fb832b.1575916815.git.paul.chaignon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/net/bpf_jit_comp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/net/bpf_jit_comp.c b/arch/riscv/net/bpf_jit_comp.c
index 5451ef3845f2..7fbf56aab661 100644
--- a/arch/riscv/net/bpf_jit_comp.c
+++ b/arch/riscv/net/bpf_jit_comp.c
@@ -631,14 +631,14 @@ static int emit_bpf_tail_call(int insn, struct rv_jit_context *ctx)
 		return -1;
 	emit(rv_bgeu(RV_REG_A2, RV_REG_T1, off >> 1), ctx);
 
-	/* if (--TCC < 0)
+	/* if (TCC-- < 0)
 	 *     goto out;
 	 */
 	emit(rv_addi(RV_REG_T1, tcc, -1), ctx);
 	off = (tc_ninsn - (ctx->ninsns - start_insn)) << 2;
 	if (is_13b_check(off, insn))
 		return -1;
-	emit(rv_blt(RV_REG_T1, RV_REG_ZERO, off >> 1), ctx);
+	emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx);
 
 	/* prog = array->ptrs[index];
 	 * if (!prog)
-- 
2.20.1

[PATCH AUTOSEL 5.4 072/187] bpf, mips: Limit to 33 tail calls

[Sasha Levin]

From: Paul Chaignon <paul.chaignon@orange.com>

[ Upstream commit e49e6f6db04e915dccb494ae10fa14888fea6f89 ]

All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime.  In addition, a test was recently added, in tailcalls2,
to check this limit.

This patch updates the tail call limit in MIPS' JIT compiler to allow
33 tail calls.

Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/b8eb2caac1c25453c539248e56ca22f74b5316af.1575916815.git.paul.chaignon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/net/ebpf_jit.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/mips/net/ebpf_jit.c b/arch/mips/net/ebpf_jit.c
index 46b76751f3a5..3ec69d9cbe88 100644
--- a/arch/mips/net/ebpf_jit.c
+++ b/arch/mips/net/ebpf_jit.c
@@ -604,6 +604,7 @@ static void emit_const_to_reg(struct jit_ctx *ctx, int dst, u64 value)
 static int emit_bpf_tail_call(struct jit_ctx *ctx, int this_idx)
 {
 	int off, b_off;
+	int tcc_reg;
 
 	ctx->flags |= EBPF_SEEN_TC;
 	/*
@@ -616,14 +617,14 @@ static int emit_bpf_tail_call(struct jit_ctx *ctx, int this_idx)
 	b_off = b_imm(this_idx + 1, ctx);
 	emit_instr(ctx, bne, MIPS_R_AT, MIPS_R_ZERO, b_off);
 	/*
-	 * if (--TCC < 0)
+	 * if (TCC-- < 0)
 	 *     goto out;
 	 */
 	/* Delay slot */
-	emit_instr(ctx, daddiu, MIPS_R_T5,
-		   (ctx->flags & EBPF_TCC_IN_V1) ? MIPS_R_V1 : MIPS_R_S4, -1);
+	tcc_reg = (ctx->flags & EBPF_TCC_IN_V1) ? MIPS_R_V1 : MIPS_R_S4;
+	emit_instr(ctx, daddiu, MIPS_R_T5, tcc_reg, -1);
 	b_off = b_imm(this_idx + 1, ctx);
-	emit_instr(ctx, bltz, MIPS_R_T5, b_off);
+	emit_instr(ctx, bltz, tcc_reg, b_off);
 	/*
 	 * prog = array->ptrs[index];
 	 * if (prog == NULL)
-- 
2.20.1

[PATCH AUTOSEL 5.4 073/187] bpftool: Don't crash on missing jited insns or ksyms

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 5b79bcdf03628a3a9ee04d9cd5fabcf61a8e20be ]

When the kptr_restrict sysctl is set, the kernel can fail to return
jited_ksyms or jited_prog_insns, but still have positive values in
nr_jited_ksyms and jited_prog_len. This causes bpftool to crash when
trying to dump the program because it only checks the len fields not
the actual pointers to the instructions and ksyms.

Fix this by adding the missing checks.

Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Fixes: f84192ee00b7 ("tools: bpftool: resolve calls without using imm field")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191210181412.151226-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/bpftool/prog.c          | 2 +-
 tools/bpf/bpftool/xlated_dumper.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index 43fdbbfe41bb..ea0bcd58bcb9 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -493,7 +493,7 @@ static int do_dump(int argc, char **argv)
 
 	info = &info_linear->info;
 	if (mode == DUMP_JITED) {
-		if (info->jited_prog_len == 0) {
+		if (info->jited_prog_len == 0 || !info->jited_prog_insns) {
 			p_info("no instructions returned");
 			goto err_free;
 		}
diff --git a/tools/bpf/bpftool/xlated_dumper.c b/tools/bpf/bpftool/xlated_dumper.c
index 494d7ae3614d..5b91ee65a080 100644
--- a/tools/bpf/bpftool/xlated_dumper.c
+++ b/tools/bpf/bpftool/xlated_dumper.c
@@ -174,7 +174,7 @@ static const char *print_call(void *private_data,
 	struct kernel_sym *sym;
 
 	if (insn->src_reg == BPF_PSEUDO_CALL &&
-	    (__u32) insn->imm < dd->nr_jited_ksyms)
+	    (__u32) insn->imm < dd->nr_jited_ksyms && dd->jited_ksyms)
 		address = dd->jited_ksyms[insn->imm];
 
 	sym = kernel_syms_search(dd, address);
-- 
2.20.1

[PATCH AUTOSEL 5.4 074/187] perf metricgroup: Fix printing event names of metric group with multiple events

[Sasha Levin]

From: Kajol Jain <kjain@linux.ibm.com>

[ Upstream commit eb573e746b9d4f0921dcb2449be3df41dae3caea ]

Commit f01642e4912b ("perf metricgroup: Support multiple events for
metricgroup") introduced support for multiple events in a metric group.
But with the current upstream, metric events names are not printed
properly

In power9 platform:

command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2
     1.000208486
     2.000368863
     2.001400558

Similarly in skylake platform:

command:./perf stat --metric-only -M Power -I 1000
     1.000579994
     2.002189493

With current upstream version, issue is with event name comparison logic
in find_evsel_group(). Current logic is to compare events belonging to a
metric group to the events in perf_evlist.  Since the break statement is
missing in the loop used for comparison between metric group and
perf_evlist events, the loop continues to execute even after getting a
pattern match, and end up in discarding the matches.

Incase of single metric event belongs to metric group, its working fine,
because in case of single event once it compare all events it reaches to
end of perf_evlist.

Example for single metric event in power9 platform:

command:# ./perf stat --metric-only  -M branches_per_inst -I 1000 sleep 1
     1.000094653                  0.2
     1.001337059                  0.0

This patch fixes the issue by making sure once we found all events
belongs to that metric event matched in find_evsel_group(), we
successfully break from that loop by adding corresponding condition.

With this patch:
In power9 platform:

command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2
result:#
            time  derat_4k_miss_rate_percent  derat_4k_miss_ratio derat_miss_ratio derat_64k_miss_rate_percent  derat_64k_miss_ratio dslb_miss_rate_percent islb_miss_rate_percent
     1.000135672                         0.0                  0.3              1.0                         0.0                   0.2                    0.0                    0.0
     2.000380617                         0.0                  0.0              0.0                         0.0                   0.0                    0.0                    0.0

command:# ./perf stat --metric-only -M Power -I 1000

Similarly in skylake platform:
result:#
            time    Turbo_Utilization    C3_Core_Residency  C6_Core_Residency  C7_Core_Residency    C2_Pkg_Residency  C3_Pkg_Residency     C6_Pkg_Residency   C7_Pkg_Residency
     1.000563580                  0.3                  0.0                2.6               44.2                21.9               0.0                  0.0               0.0
     2.002235027                  0.4                  0.0                2.7               43.0                20.7               0.0                  0.0               0.0

Committer testing:

  Before:

  [root@seventh ~]# perf stat --metric-only -M Power -I 1000
  #           time
       1.000383223
       2.001168182
       3.001968545
       4.002741200
       5.003442022
  ^C     5.777687244

  [root@seventh ~]#

  After the patch:

  [root@seventh ~]# perf stat --metric-only -M Power -I 1000
  #           time    Turbo_Utilization    C3_Core_Residency    C6_Core_Residency    C7_Core_Residency     C2_Pkg_Residency     C3_Pkg_Residency     C6_Pkg_Residency     C7_Pkg_Residency
       1.000406577                  0.4                  0.1                  1.4                 97.0                  0.0                  0.0                  0.0                  0.0
       2.001481572                  0.3                  0.0                  0.6                 97.9                  0.0                  0.0                  0.0                  0.0
       3.002332585                  0.2                  0.0                  1.0                 97.5                  0.0                  0.0                  0.0                  0.0
       4.003196624                  0.2                  0.0                  0.3                 98.6                  0.0                  0.0                  0.0                  0.0
       5.004063851                  0.3                  0.0                  0.7                 97.7                  0.0                  0.0                  0.0                  0.0
  ^C     5.471260276                  0.2                  0.0                  0.5                 49.3                  0.0                  0.0                  0.0                  0.0

  [root@seventh ~]#
  [root@seventh ~]# dmesg | grep -i skylake
  [    0.187807] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
  [root@seventh ~]#

Fixes: f01642e4912b ("perf metricgroup: Support multiple events for metricgroup")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191120084059.24458-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/metricgroup.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/metricgroup.c b/tools/perf/util/metricgroup.c
index a7c0424dbda3..940a6e7a6854 100644
--- a/tools/perf/util/metricgroup.c
+++ b/tools/perf/util/metricgroup.c
@@ -103,8 +103,11 @@ static struct evsel *find_evsel_group(struct evlist *perf_evlist,
 		if (!strcmp(ev->name, ids[i])) {
 			if (!metric_events[i])
 				metric_events[i] = ev;
+			i++;
+			if (i == idnum)
+				break;
 		} else {
-			if (++i == idnum) {
+			if (i + 1 == idnum) {
 				/* Discard the whole match and start again */
 				i = 0;
 				memset(metric_events, 0,
@@ -124,7 +127,7 @@ static struct evsel *find_evsel_group(struct evlist *perf_evlist,
 		}
 	}
 
-	if (i != idnum - 1) {
+	if (i != idnum) {
 		/* Not whole match */
 		return NULL;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.4 075/187] perf header: Fix false warning when there are no duplicate cache entries

[Sasha Levin]

From: Michael Petlan <mpetlan@redhat.com>

[ Upstream commit 28707826877f84bce0977845ea529cbdd08e4e8d ]

Before this patch, perf expected that there might be NPROC*4 unique
cache entries at max, however, it also expected that some of them would
be shared and/or of the same size, thus the final number of entries
would be reduced to be lower than NPROC*4. In case the number of entries
hadn't been reduced (was NPROC*4), the warning was printed.

However, some systems might have unusual cache topology, such as the
following two-processor KVM guest:

	cpu  level  shared_cpu_list  size
	  0     1         0           32K
	  0     1         0           64K
	  0     2         0           512K
	  0     3         0           8192K
	  1     1         1           32K
	  1     1         1           64K
	  1     2         1           512K
	  1     3         1           8192K

This KVM guest has 8 (NPROC*4) unique cache entries, which used to make
perf printing the message, although there actually aren't "way too many
cpu caches".

v2: Removing unused argument.

v3: Unifying the way we obtain number of cpus.

v4: Removed '& UINT_MAX' construct which is redundant.

Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 20191208162056.20772-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/header.c | 21 ++++++---------------
 1 file changed, 6 insertions(+), 15 deletions(-)

diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index becc2d109423..d3412f2c0d18 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -1089,21 +1089,18 @@ static void cpu_cache_level__fprintf(FILE *out, struct cpu_cache_level *c)
 	fprintf(out, "L%d %-15s %8s [%s]\n", c->level, c->type, c->size, c->map);
 }
 
-static int build_caches(struct cpu_cache_level caches[], u32 size, u32 *cntp)
+#define MAX_CACHE_LVL 4
+
+static int build_caches(struct cpu_cache_level caches[], u32 *cntp)
 {
 	u32 i, cnt = 0;
-	long ncpus;
 	u32 nr, cpu;
 	u16 level;
 
-	ncpus = sysconf(_SC_NPROCESSORS_CONF);
-	if (ncpus < 0)
-		return -1;
-
-	nr = (u32)(ncpus & UINT_MAX);
+	nr = cpu__max_cpu();
 
 	for (cpu = 0; cpu < nr; cpu++) {
-		for (level = 0; level < 10; level++) {
+		for (level = 0; level < MAX_CACHE_LVL; level++) {
 			struct cpu_cache_level c;
 			int err;
 
@@ -1123,18 +1120,12 @@ static int build_caches(struct cpu_cache_level caches[], u32 size, u32 *cntp)
 				caches[cnt++] = c;
 			else
 				cpu_cache_level__free(&c);
-
-			if (WARN_ONCE(cnt == size, "way too many cpu caches.."))
-				goto out;
 		}
 	}
- out:
 	*cntp = cnt;
 	return 0;
 }
 
-#define MAX_CACHE_LVL 4
-
 static int write_cache(struct feat_fd *ff,
 		       struct evlist *evlist __maybe_unused)
 {
@@ -1143,7 +1134,7 @@ static int write_cache(struct feat_fd *ff,
 	u32 cnt = 0, i, version = 1;
 	int ret;
 
-	ret = build_caches(caches, max_caches, &cnt);
+	ret = build_caches(caches, &cnt);
 	if (ret)
 		goto out;
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 076/187] spi: spi-ti-qspi: Fix a bug when accessing non default CS

[Sasha Levin]

From: Vignesh Raghavendra <vigneshr@ti.com>

[ Upstream commit c52c91bb9aa6bd8c38dbf9776158e33038aedd43 ]

When switching ChipSelect from default CS0 to any other CS, driver fails
to update the bits in system control module register that control which
CS is mapped for MMIO access. This causes reads to fail when driver
tries to access QSPI flash on CS1/2/3.

Fix this by updating appropriate bits whenever active CS changes.

Reported-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20191211155216.30212-1-vigneshr@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-ti-qspi.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 3cb65371ae3b..66dcb6128539 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -62,6 +62,7 @@ struct ti_qspi {
 	u32 dc;
 
 	bool mmap_enabled;
+	int current_cs;
 };
 
 #define QSPI_PID			(0x0)
@@ -487,6 +488,7 @@ static void ti_qspi_enable_memory_map(struct spi_device *spi)
 				   MEM_CS_EN(spi->chip_select));
 	}
 	qspi->mmap_enabled = true;
+	qspi->current_cs = spi->chip_select;
 }
 
 static void ti_qspi_disable_memory_map(struct spi_device *spi)
@@ -498,6 +500,7 @@ static void ti_qspi_disable_memory_map(struct spi_device *spi)
 		regmap_update_bits(qspi->ctrl_base, qspi->ctrl_reg,
 				   MEM_CS_MASK, 0);
 	qspi->mmap_enabled = false;
+	qspi->current_cs = -1;
 }
 
 static void ti_qspi_setup_mmap_read(struct spi_device *spi, u8 opcode,
@@ -543,7 +546,7 @@ static int ti_qspi_exec_mem_op(struct spi_mem *mem,
 
 	mutex_lock(&qspi->list_lock);
 
-	if (!qspi->mmap_enabled)
+	if (!qspi->mmap_enabled || qspi->current_cs != mem->spi->chip_select)
 		ti_qspi_enable_memory_map(mem->spi);
 	ti_qspi_setup_mmap_read(mem->spi, op->cmd.opcode, op->data.buswidth,
 				op->addr.nbytes, op->dummy.nbytes);
@@ -799,6 +802,7 @@ static int ti_qspi_probe(struct platform_device *pdev)
 		}
 	}
 	qspi->mmap_enabled = false;
+	qspi->current_cs = -1;
 
 	ret = devm_spi_register_master(&pdev->dev, master);
 	if (!ret)
-- 
2.20.1

[PATCH AUTOSEL 5.4 077/187] ARM: dts: am437x-gp/epos-evm: fix panel compatible

[Sasha Levin]

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

[ Upstream commit c6b16761c6908d3dc167a0a566578b4b0b972905 ]

The LCD panel on AM4 GP EVMs and ePOS boards seems to be
osd070t1718-19ts. The current dts files say osd057T0559-34ts. Possibly
the panel has changed since the early EVMs, or there has been a mistake
with the panel type.

Update the DT files accordingly.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am437x-gp-evm.dts  | 2 +-
 arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index cae4500194fe..811c8cae315b 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -86,7 +86,7 @@
 		};
 
 	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
 		label = "lcd";
 
 		backlight = <&lcd_bl>;
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 95314121d111..078cb473fa7d 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -42,7 +42,7 @@
 	};
 
 	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
 		label = "lcd";
 
 		backlight = <&lcd_bl>;
-- 
2.20.1

[PATCH AUTOSEL 5.4 078/187] kselftest/runner: Print new line in print of timeout log

[Sasha Levin]

From: SeongJae Park <sjpark@amazon.de>

[ Upstream commit d187801d1a46519d2a322f879f7c8f85c685372e ]

If a timeout failure occurs, kselftest kills the test process and prints
the timeout log.  If the test process has killed while printing a log
that ends with new line, the timeout log can be printed in middle of the
test process output so that it can be seems like a comment, as below:

    # test_process_log	not ok 3 selftests: timers: nsleep-lat # TIMEOUT

This commit avoids such problem by printing one more line before the
TIMEOUT failure log.

Signed-off-by: SeongJae Park <sjpark@amazon.de>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/kselftest/runner.sh | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/kselftest/runner.sh b/tools/testing/selftests/kselftest/runner.sh
index 84de7bc74f2c..a8d20cbb711c 100644
--- a/tools/testing/selftests/kselftest/runner.sh
+++ b/tools/testing/selftests/kselftest/runner.sh
@@ -79,6 +79,7 @@ run_one()
 		if [ $rc -eq $skip_rc ]; then	\
 			echo "not ok $test_num $TEST_HDR_MSG # SKIP"
 		elif [ $rc -eq $timeout_rc ]; then \
+			echo "#"
 			echo "not ok $test_num $TEST_HDR_MSG # TIMEOUT"
 		else
 			echo "not ok $test_num $TEST_HDR_MSG # exit=$rc"
-- 
2.20.1

[PATCH AUTOSEL 5.4 079/187] kselftest: Support old perl versions

[Sasha Levin]

From: SeongJae Park <sjpark@amazon.de>

[ Upstream commit 4eac734486fd431e0756cc5e929f140911a36a53 ]

On an old perl such as v5.10.1, `kselftest/prefix.pl` gives below error
message:

    Can't locate object method "autoflush" via package "IO::Handle" at kselftest/prefix.pl line 10.

This commit fixes the error by explicitly specifying the use of the
`IO::Handle` package.

Signed-off-by: SeongJae Park <sjpark@amazon.de>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/kselftest/prefix.pl | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/kselftest/prefix.pl b/tools/testing/selftests/kselftest/prefix.pl
index ec7e48118183..31f7c2a0a8bd 100755
--- a/tools/testing/selftests/kselftest/prefix.pl
+++ b/tools/testing/selftests/kselftest/prefix.pl
@@ -3,6 +3,7 @@
 # Prefix all lines with "# ", unbuffered. Command being piped in may need
 # to have unbuffering forced with "stdbuf -i0 -o0 -e0 $cmd".
 use strict;
+use IO::Handle;
 
 binmode STDIN;
 binmode STDOUT;
-- 
2.20.1

[PATCH AUTOSEL 5.4 080/187] samples: bpf: Replace symbol compare of trace_event

[Sasha Levin]

From: "Daniel T. Lee" <danieltimlee@gmail.com>

[ Upstream commit bba1b2a890253528c45aa66cf856f289a215bfbc ]

Previously, when this sample is added, commit 1c47910ef8013
("samples/bpf: add perf_event+bpf example"), a symbol 'sys_read' and
'sys_write' has been used without no prefixes. But currently there are
no exact symbols with these under kallsyms and this leads to failure.

This commit changes exact compare to substring compare to keep compatible
with exact symbol or prefixed symbol.

Fixes: 1c47910ef8013 ("samples/bpf: add perf_event+bpf example")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191205080114.19766-2-danieltimlee@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/bpf/trace_event_user.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/samples/bpf/trace_event_user.c b/samples/bpf/trace_event_user.c
index 16a16eadd509..749a50f2f9f3 100644
--- a/samples/bpf/trace_event_user.c
+++ b/samples/bpf/trace_event_user.c
@@ -37,9 +37,9 @@ static void print_ksym(__u64 addr)
 	}
 
 	printf("%s;", sym->name);
-	if (!strcmp(sym->name, "sys_read"))
+	if (!strstr(sym->name, "sys_read"))
 		sys_read_seen = true;
-	else if (!strcmp(sym->name, "sys_write"))
+	else if (!strstr(sym->name, "sys_write"))
 		sys_write_seen = true;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 081/187] samples: bpf: fix syscall_tp due to unused syscall

[Sasha Levin]

From: "Daniel T. Lee" <danieltimlee@gmail.com>

[ Upstream commit fe3300897cbfd76c6cb825776e5ac0ca50a91ca4 ]

Currently, open() is called from the user program and it calls the syscall
'sys_openat', not the 'sys_open'. This leads to an error of the program
of user side, due to the fact that the counter maps are zero since no
function such 'sys_open' is called.

This commit adds the kernel bpf program which are attached to the
tracepoint 'sys_enter_openat' and 'sys_enter_openat'.

Fixes: 1da236b6be963 ("bpf: add a test case for syscalls/sys_{enter|exit}_* tracepoints")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/bpf/syscall_tp_kern.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/samples/bpf/syscall_tp_kern.c b/samples/bpf/syscall_tp_kern.c
index 1d78819ffef1..630ce8c4d5a2 100644
--- a/samples/bpf/syscall_tp_kern.c
+++ b/samples/bpf/syscall_tp_kern.c
@@ -47,13 +47,27 @@ static __always_inline void count(void *map)
 SEC("tracepoint/syscalls/sys_enter_open")
 int trace_enter_open(struct syscalls_enter_open_args *ctx)
 {
-	count((void *)&enter_open_map);
+	count(&enter_open_map);
+	return 0;
+}
+
+SEC("tracepoint/syscalls/sys_enter_openat")
+int trace_enter_open_at(struct syscalls_enter_open_args *ctx)
+{
+	count(&enter_open_map);
 	return 0;
 }
 
 SEC("tracepoint/syscalls/sys_exit_open")
 int trace_enter_exit(struct syscalls_exit_open_args *ctx)
 {
-	count((void *)&exit_open_map);
+	count(&exit_open_map);
+	return 0;
+}
+
+SEC("tracepoint/syscalls/sys_exit_openat")
+int trace_enter_exit_at(struct syscalls_exit_open_args *ctx)
+{
+	count(&exit_open_map);
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.4 082/187] arm64: dts: ls1028a: fix reboot node

[Sasha Levin]

From: Michael Walle <michael@walle.cc>

[ Upstream commit 3f0fb37b22b460e3dec62bee284932881574acb9 ]

The reboot register isn't located inside the DCFG controller, but in its
own RST controller. Fix it.

Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index c7dae9ec17da..bb960fe2bb64 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -102,7 +102,7 @@
 
 	reboot {
 		compatible ="syscon-reboot";
-		regmap = <&dcfg>;
+		regmap = <&rst>;
 		offset = <0xb0>;
 		mask = <0x02>;
 	};
@@ -161,6 +161,12 @@
 			big-endian;
 		};
 
+		rst: syscon@1e60000 {
+			compatible = "syscon";
+			reg = <0x0 0x1e60000 0x0 0x10000>;
+			little-endian;
+		};
+
 		scfg: syscon@1fc0000 {
 			compatible = "fsl,ls1028a-scfg", "syscon";
 			reg = <0x0 0x1fc0000 0x0 0x10000>;
-- 
2.20.1

[PATCH AUTOSEL 5.4 082/187] arm64: dts: ls1028a: fix reboot node

[Sasha Levin]

From: Michael Walle <michael@walle.cc>

[ Upstream commit 3f0fb37b22b460e3dec62bee284932881574acb9 ]

The reboot register isn't located inside the DCFG controller, but in its
own RST controller. Fix it.

Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index c7dae9ec17da..bb960fe2bb64 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -102,7 +102,7 @@
 
 	reboot {
 		compatible ="syscon-reboot";
-		regmap = <&dcfg>;
+		regmap = <&rst>;
 		offset = <0xb0>;
 		mask = <0x02>;
 	};
@@ -161,6 +161,12 @@
 			big-endian;
 		};
 
+		rst: syscon@1e60000 {
+			compatible = "syscon";
+			reg = <0x0 0x1e60000 0x0 0x10000>;
+			little-endian;
+		};
+
 		scfg: syscon@1fc0000 {
 			compatible = "fsl,ls1028a-scfg", "syscon";
 			reg = <0x0 0x1fc0000 0x0 0x10000>;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 083/187] ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS

[Sasha Levin]

From: Leonard Crestez <leonard.crestez@nxp.com>

[ Upstream commit 46db63abb79524209c15c683feccfba116746757 ]

This is currently off and that's not desirable: default imx config is
meant to be generally useful for development and debugging.

Running git bisect between v5.4 and v5.5-rc1 finds this started from
commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency")

Explicit CONFIG_DEBUG_FS=y was earlier removed by
commit c29d541f590c ("ARM: imx_v6_v7_defconfig: Remove unneeded options")

A very similar fix was required before:
commit 7e9eb6268809 ("ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS")

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/configs/imx_v6_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 0f7381ee0c37..dabb80453249 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -460,6 +460,7 @@ CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_PROVE_LOCKING=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-- 
2.20.1

[PATCH AUTOSEL 5.4 083/187] ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS

[Sasha Levin]

From: Leonard Crestez <leonard.crestez@nxp.com>

[ Upstream commit 46db63abb79524209c15c683feccfba116746757 ]

This is currently off and that's not desirable: default imx config is
meant to be generally useful for development and debugging.

Running git bisect between v5.4 and v5.5-rc1 finds this started from
commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency")

Explicit CONFIG_DEBUG_FS=y was earlier removed by
commit c29d541f590c ("ARM: imx_v6_v7_defconfig: Remove unneeded options")

A very similar fix was required before:
commit 7e9eb6268809 ("ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS")

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/configs/imx_v6_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 0f7381ee0c37..dabb80453249 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -460,6 +460,7 @@ CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_PROVE_LOCKING=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 084/187] tty: serial: msm_serial: Fix lockup for sysrq and oops

[Sasha Levin]

From: Leo Yan <leo.yan@linaro.org>

[ Upstream commit 0e4f7f920a5c6bfe5e851e989f27b35a0cc7fb7e ]

As the commit 677fe555cbfb ("serial: imx: Fix recursive locking bug")
has mentioned the uart driver might cause recursive locking between
normal printing and the kernel debugging facilities (e.g. sysrq and
oops).  In the commit it gave out suggestion for fixing recursive
locking issue: "The solution is to avoid locking in the sysrq case
and trylock in the oops_in_progress case."

This patch follows the suggestion (also used the exactly same code with
other serial drivers, e.g. amba-pl011.c) to fix the recursive locking
issue, this can avoid stuck caused by deadlock and print out log for
sysrq and oops.

Fixes: 04896a77a97b ("msm_serial: serial driver for MSM7K onboard serial peripheral.")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191127141544.4277-2-leo.yan@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/msm_serial.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 00964b6e4ac1..e0718ee5d42a 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1580,6 +1580,7 @@ static void __msm_console_write(struct uart_port *port, const char *s,
 	int num_newlines = 0;
 	bool replaced = false;
 	void __iomem *tf;
+	int locked = 1;
 
 	if (is_uartdm)
 		tf = port->membase + UARTDM_TF;
@@ -1592,7 +1593,13 @@ static void __msm_console_write(struct uart_port *port, const char *s,
 			num_newlines++;
 	count += num_newlines;
 
-	spin_lock(&port->lock);
+	if (port->sysrq)
+		locked = 0;
+	else if (oops_in_progress)
+		locked = spin_trylock(&port->lock);
+	else
+		spin_lock(&port->lock);
+
 	if (is_uartdm)
 		msm_reset_dm_count(port, count);
 
@@ -1628,7 +1635,9 @@ static void __msm_console_write(struct uart_port *port, const char *s,
 		iowrite32_rep(tf, buf, 1);
 		i += num_chars;
 	}
-	spin_unlock(&port->lock);
+
+	if (locked)
+		spin_unlock(&port->lock);
 }
 
 static void msm_console_write(struct console *co, const char *s,
-- 
2.20.1

[PATCH AUTOSEL 5.4 085/187] pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration

[Sasha Levin]

From: Andrew Jeffery <andrew@aj.id.au>

[ Upstream commit eb45f2110b036e4e35d3f3aaee1c2ccf49d92425 ]

Early revisions of the AST2600 datasheet are conflicted about the state
of the LPC/eSPI strapping bit (SCU510[6]). Conversations with ASPEED
determined that the reference pinmux configuration tables were in error
and the SCU documentation contained the correct configuration. Update
the driver to reflect the state described in the SCU documentation.

Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20191202050110.15340-1-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 24 ++++++++--------------
 1 file changed, 8 insertions(+), 16 deletions(-)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index c6800d220920..bb07024d22ed 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -1088,60 +1088,52 @@ SSSF_PIN_DECL(AF15, GPIOV7, LPCSMI, SIG_DESC_SET(SCU434, 15));
 
 #define AB7 176
 SIG_EXPR_LIST_DECL_SESG(AB7, LAD0, LPC, SIG_DESC_SET(SCU434, 16),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AB7, ESPID0, ESPI, SIG_DESC_SET(SCU434, 16),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AB7, ESPID0, ESPI, SIG_DESC_SET(SCU434, 16));
 PIN_DECL_2(AB7, GPIOW0, LAD0, ESPID0);
 
 #define AB8 177
 SIG_EXPR_LIST_DECL_SESG(AB8, LAD1, LPC, SIG_DESC_SET(SCU434, 17),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AB8, ESPID1, ESPI, SIG_DESC_SET(SCU434, 17),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AB8, ESPID1, ESPI, SIG_DESC_SET(SCU434, 17));
 PIN_DECL_2(AB8, GPIOW1, LAD1, ESPID1);
 
 #define AC8 178
 SIG_EXPR_LIST_DECL_SESG(AC8, LAD2, LPC, SIG_DESC_SET(SCU434, 18),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AC8, ESPID2, ESPI, SIG_DESC_SET(SCU434, 18),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AC8, ESPID2, ESPI, SIG_DESC_SET(SCU434, 18));
 PIN_DECL_2(AC8, GPIOW2, LAD2, ESPID2);
 
 #define AC7 179
 SIG_EXPR_LIST_DECL_SESG(AC7, LAD3, LPC, SIG_DESC_SET(SCU434, 19),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AC7, ESPID3, ESPI, SIG_DESC_SET(SCU434, 19),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AC7, ESPID3, ESPI, SIG_DESC_SET(SCU434, 19));
 PIN_DECL_2(AC7, GPIOW3, LAD3, ESPID3);
 
 #define AE7 180
 SIG_EXPR_LIST_DECL_SESG(AE7, LCLK, LPC, SIG_DESC_SET(SCU434, 20),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AE7, ESPICK, ESPI, SIG_DESC_SET(SCU434, 20),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AE7, ESPICK, ESPI, SIG_DESC_SET(SCU434, 20));
 PIN_DECL_2(AE7, GPIOW4, LCLK, ESPICK);
 
 #define AF7 181
 SIG_EXPR_LIST_DECL_SESG(AF7, LFRAME, LPC, SIG_DESC_SET(SCU434, 21),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AF7, ESPICS, ESPI, SIG_DESC_SET(SCU434, 21),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AF7, ESPICS, ESPI, SIG_DESC_SET(SCU434, 21));
 PIN_DECL_2(AF7, GPIOW5, LFRAME, ESPICS);
 
 #define AD7 182
 SIG_EXPR_LIST_DECL_SESG(AD7, LSIRQ, LSIRQ, SIG_DESC_SET(SCU434, 22),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AD7, ESPIALT, ESPIALT, SIG_DESC_SET(SCU434, 22),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AD7, ESPIALT, ESPIALT, SIG_DESC_SET(SCU434, 22));
 PIN_DECL_2(AD7, GPIOW6, LSIRQ, ESPIALT);
 FUNC_GROUP_DECL(LSIRQ, AD7);
 FUNC_GROUP_DECL(ESPIALT, AD7);
 
 #define AD8 183
 SIG_EXPR_LIST_DECL_SESG(AD8, LPCRST, LPC, SIG_DESC_SET(SCU434, 23),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AD8, ESPIRST, ESPI, SIG_DESC_SET(SCU434, 23),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AD8, ESPIRST, ESPI, SIG_DESC_SET(SCU434, 23));
 PIN_DECL_2(AD8, GPIOW7, LPCRST, ESPIRST);
 
 FUNC_GROUP_DECL(LPC, AB7, AB8, AC8, AC7, AE7, AF7, AD8);
-- 
2.20.1

[PATCH AUTOSEL 5.4 085/187] pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration

[Sasha Levin]

From: Andrew Jeffery <andrew@aj.id.au>

[ Upstream commit eb45f2110b036e4e35d3f3aaee1c2ccf49d92425 ]

Early revisions of the AST2600 datasheet are conflicted about the state
of the LPC/eSPI strapping bit (SCU510[6]). Conversations with ASPEED
determined that the reference pinmux configuration tables were in error
and the SCU documentation contained the correct configuration. Update
the driver to reflect the state described in the SCU documentation.

Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20191202050110.15340-1-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 24 ++++++++--------------
 1 file changed, 8 insertions(+), 16 deletions(-)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index c6800d220920..bb07024d22ed 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -1088,60 +1088,52 @@ SSSF_PIN_DECL(AF15, GPIOV7, LPCSMI, SIG_DESC_SET(SCU434, 15));
 
 #define AB7 176
 SIG_EXPR_LIST_DECL_SESG(AB7, LAD0, LPC, SIG_DESC_SET(SCU434, 16),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AB7, ESPID0, ESPI, SIG_DESC_SET(SCU434, 16),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AB7, ESPID0, ESPI, SIG_DESC_SET(SCU434, 16));
 PIN_DECL_2(AB7, GPIOW0, LAD0, ESPID0);
 
 #define AB8 177
 SIG_EXPR_LIST_DECL_SESG(AB8, LAD1, LPC, SIG_DESC_SET(SCU434, 17),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AB8, ESPID1, ESPI, SIG_DESC_SET(SCU434, 17),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AB8, ESPID1, ESPI, SIG_DESC_SET(SCU434, 17));
 PIN_DECL_2(AB8, GPIOW1, LAD1, ESPID1);
 
 #define AC8 178
 SIG_EXPR_LIST_DECL_SESG(AC8, LAD2, LPC, SIG_DESC_SET(SCU434, 18),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AC8, ESPID2, ESPI, SIG_DESC_SET(SCU434, 18),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AC8, ESPID2, ESPI, SIG_DESC_SET(SCU434, 18));
 PIN_DECL_2(AC8, GPIOW2, LAD2, ESPID2);
 
 #define AC7 179
 SIG_EXPR_LIST_DECL_SESG(AC7, LAD3, LPC, SIG_DESC_SET(SCU434, 19),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AC7, ESPID3, ESPI, SIG_DESC_SET(SCU434, 19),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AC7, ESPID3, ESPI, SIG_DESC_SET(SCU434, 19));
 PIN_DECL_2(AC7, GPIOW3, LAD3, ESPID3);
 
 #define AE7 180
 SIG_EXPR_LIST_DECL_SESG(AE7, LCLK, LPC, SIG_DESC_SET(SCU434, 20),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AE7, ESPICK, ESPI, SIG_DESC_SET(SCU434, 20),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AE7, ESPICK, ESPI, SIG_DESC_SET(SCU434, 20));
 PIN_DECL_2(AE7, GPIOW4, LCLK, ESPICK);
 
 #define AF7 181
 SIG_EXPR_LIST_DECL_SESG(AF7, LFRAME, LPC, SIG_DESC_SET(SCU434, 21),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AF7, ESPICS, ESPI, SIG_DESC_SET(SCU434, 21),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AF7, ESPICS, ESPI, SIG_DESC_SET(SCU434, 21));
 PIN_DECL_2(AF7, GPIOW5, LFRAME, ESPICS);
 
 #define AD7 182
 SIG_EXPR_LIST_DECL_SESG(AD7, LSIRQ, LSIRQ, SIG_DESC_SET(SCU434, 22),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AD7, ESPIALT, ESPIALT, SIG_DESC_SET(SCU434, 22),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AD7, ESPIALT, ESPIALT, SIG_DESC_SET(SCU434, 22));
 PIN_DECL_2(AD7, GPIOW6, LSIRQ, ESPIALT);
 FUNC_GROUP_DECL(LSIRQ, AD7);
 FUNC_GROUP_DECL(ESPIALT, AD7);
 
 #define AD8 183
 SIG_EXPR_LIST_DECL_SESG(AD8, LPCRST, LPC, SIG_DESC_SET(SCU434, 23),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AD8, ESPIRST, ESPI, SIG_DESC_SET(SCU434, 23),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AD8, ESPIRST, ESPI, SIG_DESC_SET(SCU434, 23));
 PIN_DECL_2(AD8, GPIOW7, LPCRST, ESPIRST);
 
 FUNC_GROUP_DECL(LPC, AB7, AB8, AC8, AC7, AE7, AF7, AD8);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 086/187] bus: ti-sysc: Fix missing reset delay handling

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit e709ed70d122e94cb426b1e1f905829eae19a009 ]

We have dts property for "ti,sysc-delay-us", and we're using it, but the
wait after OCP softreset only happens if devices are probed in legacy mode.

Let's add a delay after writing the OCP softreset when specified.

Fixes: e0db94fe87da ("bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits")
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/ti-sysc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 2b6670daf7fc..34bd9bf4e68a 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1594,6 +1594,10 @@ static int sysc_reset(struct sysc *ddata)
 	sysc_val |= sysc_mask;
 	sysc_write(ddata, sysc_offset, sysc_val);
 
+	if (ddata->cfg.srst_udelay)
+		usleep_range(ddata->cfg.srst_udelay,
+			     ddata->cfg.srst_udelay * 2);
+
 	if (ddata->clk_enable_quirk)
 		ddata->clk_enable_quirk(ddata);
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 087/187] net: usb: lan78xx: Fix suspend/resume PHY register access error

[Sasha Levin]

From: Cristian Birsan <cristian.birsan@microchip.com>

[ Upstream commit 20032b63586ac6c28c936dff696981159913a13f ]

Lan78xx driver accesses the PHY registers through MDIO bus over USB
connection. When performing a suspend/resume, the PHY registers can be
accessed before the USB connection is resumed. This will generate an
error and will prevent the device to resume correctly.
This patch adds the dependency between the MDIO bus and USB device to
allow correct handling of suspend/resume.

Fixes: ce85e13ad6ef ("lan78xx: Update to use phylib instead of mii_if_info.")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/lan78xx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index f24a1b0b801f..0becc79fd431 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -1808,6 +1808,7 @@ static int lan78xx_mdio_init(struct lan78xx_net *dev)
 	dev->mdiobus->read = lan78xx_mdiobus_read;
 	dev->mdiobus->write = lan78xx_mdiobus_write;
 	dev->mdiobus->name = "lan78xx-mdiobus";
+	dev->mdiobus->parent = &dev->udev->dev;
 
 	snprintf(dev->mdiobus->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
 		 dev->udev->bus->busnum, dev->udev->devnum);
-- 
2.20.1

[PATCH AUTOSEL 5.4 088/187] qede: Fix multicast mac configuration

[Sasha Levin]

From: Manish Chopra <manishc@marvell.com>

[ Upstream commit 0af67e49b018e7280a4227bfe7b6005bc9d3e442 ]

Driver doesn't accommodate the configuration for max number
of multicast mac addresses, in such particular case it leaves
the device with improper/invalid multicast configuration state,
causing connectivity issues (in lacp bonding like scenarios).

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qede/qede_filter.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qede/qede_filter.c b/drivers/net/ethernet/qlogic/qede/qede_filter.c
index 9a6a9a008714..c8bdbf057d5a 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_filter.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_filter.c
@@ -1230,7 +1230,7 @@ qede_configure_mcast_filtering(struct net_device *ndev,
 	netif_addr_lock_bh(ndev);
 
 	mc_count = netdev_mc_count(ndev);
-	if (mc_count < 64) {
+	if (mc_count <= 64) {
 		netdev_for_each_mc_addr(ha, ndev) {
 			ether_addr_copy(temp, ha->addr);
 			temp += ETH_ALEN;
-- 
2.20.1

[PATCH AUTOSEL 5.4 089/187] clk: walk orphan list on clock provider registration

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 66d9506440bb05289eb4867059e7b8c6ed209717 ]

So far, we walked the orphan list every time a new clock was registered
in CCF. This was fine since the clocks were only referenced by name.

Now that the clock can be referenced through DT, it is not enough:
* Controller A register first a reference clocks from controller B
  through DT.
* Controller B register all its clocks then register the provider.

Each time controller B registers a new clock, the orphan list is walked
but it can't match since the provider is registered yet. When the
provider is finally registered, the orphan list is not walked unless
another clock is registered afterward.

This can lead to situation where some clocks remain orphaned even if
the parent is available.

Walking the orphan list on provider registration solves the problem.

Reported-by: Jian Hu <jian.hu@amlogic.com>
Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20191203080805.104628-1-jbrunet@baylibre.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk.c | 62 ++++++++++++++++++++++++++++++-----------------
 1 file changed, 40 insertions(+), 22 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 1c677d7f7f53..9c570bfc40d6 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3231,6 +3231,41 @@ static inline void clk_debug_unregister(struct clk_core *core)
 }
 #endif
 
+static void clk_core_reparent_orphans_nolock(void)
+{
+	struct clk_core *orphan;
+	struct hlist_node *tmp2;
+
+	/*
+	 * walk the list of orphan clocks and reparent any that newly finds a
+	 * parent.
+	 */
+	hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
+		struct clk_core *parent = __clk_init_parent(orphan);
+
+		/*
+		 * We need to use __clk_set_parent_before() and _after() to
+		 * to properly migrate any prepare/enable count of the orphan
+		 * clock. This is important for CLK_IS_CRITICAL clocks, which
+		 * are enabled during init but might not have a parent yet.
+		 */
+		if (parent) {
+			/* update the clk tree topology */
+			__clk_set_parent_before(orphan, parent);
+			__clk_set_parent_after(orphan, parent, NULL);
+			__clk_recalc_accuracies(orphan);
+			__clk_recalc_rates(orphan, 0);
+		}
+	}
+}
+
+static void clk_core_reparent_orphans(void)
+{
+	clk_prepare_lock();
+	clk_core_reparent_orphans_nolock();
+	clk_prepare_unlock();
+}
+
 /**
  * __clk_core_init - initialize the data structures in a struct clk_core
  * @core:	clk_core being initialized
@@ -3241,8 +3276,6 @@ static inline void clk_debug_unregister(struct clk_core *core)
 static int __clk_core_init(struct clk_core *core)
 {
 	int ret;
-	struct clk_core *orphan;
-	struct hlist_node *tmp2;
 	unsigned long rate;
 
 	if (!core)
@@ -3389,27 +3422,8 @@ static int __clk_core_init(struct clk_core *core)
 		clk_enable_unlock(flags);
 	}
 
-	/*
-	 * walk the list of orphan clocks and reparent any that newly finds a
-	 * parent.
-	 */
-	hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
-		struct clk_core *parent = __clk_init_parent(orphan);
+	clk_core_reparent_orphans_nolock();
 
-		/*
-		 * We need to use __clk_set_parent_before() and _after() to
-		 * to properly migrate any prepare/enable count of the orphan
-		 * clock. This is important for CLK_IS_CRITICAL clocks, which
-		 * are enabled during init but might not have a parent yet.
-		 */
-		if (parent) {
-			/* update the clk tree topology */
-			__clk_set_parent_before(orphan, parent);
-			__clk_set_parent_after(orphan, parent, NULL);
-			__clk_recalc_accuracies(orphan);
-			__clk_recalc_rates(orphan, 0);
-		}
-	}
 
 	kref_init(&core->ref);
 out:
@@ -4255,6 +4269,8 @@ int of_clk_add_provider(struct device_node *np,
 	mutex_unlock(&of_clk_mutex);
 	pr_debug("Added clock from %pOF\n", np);
 
+	clk_core_reparent_orphans();
+
 	ret = of_clk_set_defaults(np, true);
 	if (ret < 0)
 		of_clk_del_provider(np);
@@ -4290,6 +4306,8 @@ int of_clk_add_hw_provider(struct device_node *np,
 	mutex_unlock(&of_clk_mutex);
 	pr_debug("Added clk_hw provider from %pOF\n", np);
 
+	clk_core_reparent_orphans();
+
 	ret = of_clk_set_defaults(np, true);
 	if (ret < 0)
 		of_clk_del_provider(np);
-- 
2.20.1

[PATCH AUTOSEL 5.4 090/187] mac80211: fix TID field in monitor mode transmit

[Sasha Levin]

From: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>

[ Upstream commit 753ffad3d6243303994227854d951ff5c70fa9e0 ]

Fix overwriting of the qos_ctrl.tid field for encrypted frames injected on
a monitor interface. While qos_ctrl.tid is not encrypted, it's used as an
input into the encryption algorithm so it's protected, and thus cannot be
modified after encryption. For injected frames, the encryption may already
have been done in userspace, so we cannot change any fields.

Before passing the frame to the driver, the qos_ctrl.tid field is updated
from skb->priority. Prior to dbd50a851c50 skb->priority was updated in
ieee80211_select_queue_80211(), but this function is no longer always
called.

Update skb->priority in ieee80211_monitor_start_xmit() so that the value
is stored, and when later code 'modifies' the TID it really sets it to
the same value as before, preserving the encryption.

Fixes: dbd50a851c50 ("mac80211: only allocate one queue when using iTXQs")
Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>
Link: https://lore.kernel.org/r/20191119133451.14711-1-fredrik.olofsson@anyfinetworks.com
[rewrite commit message based on our discussion]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/tx.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 1fa422782905..cbd273c0b275 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2263,6 +2263,15 @@ netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb,
 						    payload[7]);
 	}
 
+	/*
+	 * Initialize skb->priority for QoS frames. This is put in the TID field
+	 * of the frame before passing it to the driver.
+	 */
+	if (ieee80211_is_data_qos(hdr->frame_control)) {
+		u8 *p = ieee80211_get_qos_ctl(hdr);
+		skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK;
+	}
+
 	memset(info, 0, sizeof(*info));
 
 	info->flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
-- 
2.20.1

[PATCH AUTOSEL 5.4 091/187] cfg80211: fix double-free after changing network namespace

[Sasha Levin]

From: Stefan Bühler <source@stbuehler.de>

[ Upstream commit 56cb31e185adb61f930743a9b70e700a43625386 ]

If wdev->wext.keys was initialized it didn't get reset to NULL on
unregister (and it doesn't get set in cfg80211_init_wdev either), but
wdev is reused if unregister was triggered through
cfg80211_switch_netns.

The next unregister (for whatever reason) will try to free
wdev->wext.keys again.

Signed-off-by: Stefan Bühler <source@stbuehler.de>
Link: https://lore.kernel.org/r/20191126100543.782023-1-stefan.buehler@tik.uni-stuttgart.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/wireless/core.c b/net/wireless/core.c
index 350513744575..3e25229a059d 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -1102,6 +1102,7 @@ static void __cfg80211_unregister_wdev(struct wireless_dev *wdev, bool sync)
 
 #ifdef CONFIG_CFG80211_WEXT
 	kzfree(wdev->wext.keys);
+	wdev->wext.keys = NULL;
 #endif
 	/* only initialized if we have a netdev */
 	if (wdev->netdev)
-- 
2.20.1

[PATCH AUTOSEL 5.4 092/187] pinctrl: pinmux: fix a possible null pointer in pinmux_can_be_used_for_gpio

[Sasha Levin]

From: Alexandre Torgue <alexandre.torgue@st.com>

[ Upstream commit 6ba2fd391ac58c1a26874f10c3054a1ea4aca2d0 ]

This commit adds a check on ops pointer to avoid a kernel panic when
ops->strict is used. Indeed, on some pinctrl driver (at least for
pinctrl-stmfx) the pinmux ops is not implemented. Let's assume than gpio
can be used in this case.

Fixes: 472a61e777fe ("pinctrl/gpio: Take MUX usage into account")
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Link: https://lore.kernel.org/r/20191204144106.10876-1-alexandre.torgue@st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinmux.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c
index e914f6efd39e..9503ddf2edc7 100644
--- a/drivers/pinctrl/pinmux.c
+++ b/drivers/pinctrl/pinmux.c
@@ -85,7 +85,7 @@ bool pinmux_can_be_used_for_gpio(struct pinctrl_dev *pctldev, unsigned pin)
 	const struct pinmux_ops *ops = pctldev->desc->pmxops;
 
 	/* Can't inspect pin, assume it can be used */
-	if (!desc)
+	if (!desc || !ops)
 		return true;
 
 	if (ops->strict && desc->mux_usecount)
-- 
2.20.1

[PATCH AUTOSEL 5.4 093/187] powerpc: Ensure that swiotlb buffer is allocated from low memory

[Sasha Levin]

From: Mike Rapoport <rppt@linux.ibm.com>

[ Upstream commit 8fabc623238e68b3ac63c0dd1657bf86c1fa33af ]

Some powerpc platforms (e.g. 85xx) limit DMA-able memory way below 4G.
If a system has more physical memory than this limit, the swiotlb
buffer is not addressable because it is allocated from memblock using
top-down mode.

Force memblock to bottom-up mode before calling swiotlb_init() to
ensure that the swiotlb buffer is DMA-able.

Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191204123524.22919-1-rppt@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/mem.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index be941d382c8d..14c2c53e3f9e 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -260,6 +260,14 @@ void __init mem_init(void)
 	BUILD_BUG_ON(MMU_PAGE_COUNT > 16);
 
 #ifdef CONFIG_SWIOTLB
+	/*
+	 * Some platforms (e.g. 85xx) limit DMA-able memory way below
+	 * 4G. We force memblock to bottom-up mode to ensure that the
+	 * memory allocated in swiotlb_init() is DMA-able.
+	 * As it's the last memblock allocation, no need to reset it
+	 * back to to-down.
+	 */
+	memblock_set_bottom_up(true);
 	swiotlb_init(0);
 #endif
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 093/187] powerpc: Ensure that swiotlb buffer is allocated from low memory

[Sasha Levin]

From: Mike Rapoport <rppt@linux.ibm.com>

[ Upstream commit 8fabc623238e68b3ac63c0dd1657bf86c1fa33af ]

Some powerpc platforms (e.g. 85xx) limit DMA-able memory way below 4G.
If a system has more physical memory than this limit, the swiotlb
buffer is not addressable because it is allocated from memblock using
top-down mode.

Force memblock to bottom-up mode before calling swiotlb_init() to
ensure that the swiotlb buffer is DMA-able.

Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191204123524.22919-1-rppt@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/mem.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index be941d382c8d..14c2c53e3f9e 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -260,6 +260,14 @@ void __init mem_init(void)
 	BUILD_BUG_ON(MMU_PAGE_COUNT > 16);
 
 #ifdef CONFIG_SWIOTLB
+	/*
+	 * Some platforms (e.g. 85xx) limit DMA-able memory way below
+	 * 4G. We force memblock to bottom-up mode to ensure that the
+	 * memory allocated in swiotlb_init() is DMA-able.
+	 * As it's the last memblock allocation, no need to reset it
+	 * back to to-down.
+	 */
+	memblock_set_bottom_up(true);
 	swiotlb_init(0);
 #endif
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 094/187] btrfs: Fix error messages in qgroup_rescan_init

[Sasha Levin]

From: Nikolay Borisov <nborisov@suse.com>

[ Upstream commit 37d02592f11bb76e4ab1dcaa5b8a2a0715403207 ]

The branch of qgroup_rescan_init which is executed from the mount
path prints wrong errors messages. The textual print out in case
BTRFS_QGROUP_STATUS_FLAG_RESCAN/BTRFS_QGROUP_STATUS_FLAG_ON are not
set are transposed. Fix it by exchanging their place.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/qgroup.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index 3ad151655eb8..5ccbc3b6c8f8 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -3232,12 +3232,12 @@ qgroup_rescan_init(struct btrfs_fs_info *fs_info, u64 progress_objectid,
 		if (!(fs_info->qgroup_flags &
 		      BTRFS_QGROUP_STATUS_FLAG_RESCAN)) {
 			btrfs_warn(fs_info,
-			"qgroup rescan init failed, qgroup is not enabled");
+			"qgroup rescan init failed, qgroup rescan is not queued");
 			ret = -EINVAL;
 		} else if (!(fs_info->qgroup_flags &
 			     BTRFS_QGROUP_STATUS_FLAG_ON)) {
 			btrfs_warn(fs_info,
-			"qgroup rescan init failed, qgroup rescan is not queued");
+			"qgroup rescan init failed, qgroup is not enabled");
 			ret = -EINVAL;
 		}
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 095/187] Btrfs: fix cloning range with a hole when using the NO_HOLES feature

[Sasha Levin]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit fcb970581dd900675c4371c2b688a57924a8368c ]

When using the NO_HOLES feature if we clone a range that contains a hole
and a temporary ENOSPC happens while dropping extents from the target
inode's range, we can end up failing and aborting the transaction with
-EEXIST or with a corrupt file extent item, that has a length greater
than it should and overlaps with other extents. For example when cloning
the following range from inode A to inode B:

  Inode A:

    extent A1                                          extent A2
  [ ----------- ]  [ hole, implicit, 4MB length ]  [ ------------- ]
  0            1MB                                 5MB            6MB

  Range to clone: [1MB, 6MB)

  Inode B:

    extent B1       extent B2        extent B3         extent B4
  [ ---------- ]  [ --------- ]    [ ---------- ]    [ ---------- ]
  0           1MB 1MB        2MB   2MB        5MB    5MB         6MB

  Target range: [1MB, 6MB) (same as source, to make it easier to explain)

The following can happen:

1) btrfs_punch_hole_range() gets -ENOSPC from __btrfs_drop_extents();

2) At that point, 'cur_offset' is set to 1MB and __btrfs_drop_extents()
   set 'drop_end' to 2MB, meaning it was able to drop only extent B2;

3) We then compute 'clone_len' as 'drop_end' - 'cur_offset' = 2MB - 1MB =
   1MB;

4) We then attempt to insert a file extent item at inode B with a file
   offset of 5MB, which is the value of clone_info->file_offset. This
   fails with error -EEXIST because there's already an extent at that
   offset (extent B4);

5) We abort the current transaction with -EEXIST and return that error
   to user space as well.

Another example, for extent corruption:

  Inode A:

    extent A1                                           extent A2
  [ ----------- ]   [ hole, implicit, 10MB length ]  [ ------------- ]
  0            1MB                                  11MB            12MB

  Inode B:

    extent B1         extent B2
  [ ----------- ]   [ --------- ]    [ ----------------------------- ]
  0            1MB 1MB         5MB  5MB                             12MB

  Target range: [1MB, 12MB) (same as source, to make it easier to explain)

1) btrfs_punch_hole_range() gets -ENOSPC from __btrfs_drop_extents();

2) At that point, 'cur_offset' is set to 1MB and __btrfs_drop_extents()
   set 'drop_end' to 5MB, meaning it was able to drop only extent B2;

3) We then compute 'clone_len' as 'drop_end' - 'cur_offset' = 5MB - 1MB =
   4MB;

4) We then insert a file extent item at inode B with a file offset of 11MB
   which is the value of clone_info->file_offset, and a length of 4MB (the
   value of 'clone_len'). So we get 2 extents items with ranges that
   overlap and an extent length of 4MB, larger then the extent A2 from
   inode A (1MB length);

5) After that we end the transaction, balance the btree dirty pages and
   then start another or join the previous transaction. It might happen
   that the transaction which inserted the incorrect extent was committed
   by another task so we end up with extent corruption if a power failure
   happens.

So fix this by making sure we attempt to insert the extent to clone at
the destination inode only if we are past dropping the sub-range that
corresponds to a hole.

Fixes: 690a5dbfc51315 ("Btrfs: fix ENOSPC errors, leading to transaction aborts, when cloning extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/file.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index c332968f9056..eaafd00f93d4 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -2601,8 +2601,8 @@ int btrfs_punch_hole_range(struct inode *inode, struct btrfs_path *path,
 			}
 		}
 
-		if (clone_info) {
-			u64 clone_len = drop_end - cur_offset;
+		if (clone_info && drop_end > clone_info->file_offset) {
+			u64 clone_len = drop_end - clone_info->file_offset;
 
 			ret = btrfs_insert_clone_extent(trans, inode, path,
 							clone_info, clone_len);
-- 
2.20.1

[PATCH AUTOSEL 5.4 096/187] ARM: shmobile: defconfig: Restore debugfs support

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit fa2cdb1762d15f701b83efa60b04f0d04e71bf89 ]

Since commit 0e4a459f56c32d3e ("tracing: Remove unnecessary DEBUG_FS
dependency"), CONFIG_DEBUG_FS is no longer auto-enabled.  This breaks
booting Debian 9, as systemd needs debugfs:

    [FAILED] Failed to mount /sys/kernel/debug.
    See 'systemctl status sys-kernel-debug.mount' for details.
    [DEPEND] Dependency failed for Local File Systems.
    ...
    You are in emergGive root password for maintenance
    (or press Control-D to continue):

Fix this by enabling CONFIG_DEBUG_FS explicitly.

See also commit 18977008f44c66bd ("ARM: multi_v7_defconfig: Restore
debugfs support").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20191209101327.26571-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/configs/shmobile_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index c6c70355141c..7e7b678ae153 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -215,4 +215,5 @@ CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-- 
2.20.1

[PATCH AUTOSEL 5.4 096/187] ARM: shmobile: defconfig: Restore debugfs support

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit fa2cdb1762d15f701b83efa60b04f0d04e71bf89 ]

Since commit 0e4a459f56c32d3e ("tracing: Remove unnecessary DEBUG_FS
dependency"), CONFIG_DEBUG_FS is no longer auto-enabled.  This breaks
booting Debian 9, as systemd needs debugfs:

    [FAILED] Failed to mount /sys/kernel/debug.
    See 'systemctl status sys-kernel-debug.mount' for details.
    [DEPEND] Dependency failed for Local File Systems.
    ...
    You are in emergGive root password for maintenance
    (or press Control-D to continue):

Fix this by enabling CONFIG_DEBUG_FS explicitly.

See also commit 18977008f44c66bd ("ARM: multi_v7_defconfig: Restore
debugfs support").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20191209101327.26571-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/configs/shmobile_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index c6c70355141c..7e7b678ae153 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -215,4 +215,5 @@ CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 097/187] btrfs: handle error in btrfs_cache_block_group

[Sasha Levin]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit db8fe64f9ce61d1d89d3c3c34d111a43afb9f053 ]

We have a BUG_ON(ret < 0) in find_free_extent from
btrfs_cache_block_group.  If we fail to allocate our ctl we'll just
panic, which is not good.  Instead just go on to another block group.
If we fail to find a block group we don't want to return ENOSPC, because
really we got a ENOMEM and that's the root of the problem.  Save our
return from btrfs_cache_block_group(), and then if we still fail to make
our allocation return that ret so we get the right error back.

Tested with inject-error.py from bcc.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/extent-tree.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 49cb26fa7c63..9ee6a6e55e4e 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -3780,6 +3780,7 @@ static noinline int find_free_extent(struct btrfs_fs_info *fs_info,
 				u64 flags, int delalloc)
 {
 	int ret = 0;
+	int cache_block_group_error = 0;
 	struct btrfs_free_cluster *last_ptr = NULL;
 	struct btrfs_block_group_cache *block_group = NULL;
 	struct find_free_extent_ctl ffe_ctl = {0};
@@ -3939,7 +3940,20 @@ static noinline int find_free_extent(struct btrfs_fs_info *fs_info,
 		if (unlikely(!ffe_ctl.cached)) {
 			ffe_ctl.have_caching_bg = true;
 			ret = btrfs_cache_block_group(block_group, 0);
-			BUG_ON(ret < 0);
+
+			/*
+			 * If we get ENOMEM here or something else we want to
+			 * try other block groups, because it may not be fatal.
+			 * However if we can't find anything else we need to
+			 * save our return here so that we return the actual
+			 * error that caused problems, not ENOSPC.
+			 */
+			if (ret < 0) {
+				if (!cache_block_group_error)
+					cache_block_group_error = ret;
+				ret = 0;
+				goto loop;
+			}
 			ret = 0;
 		}
 
@@ -4026,7 +4040,7 @@ static noinline int find_free_extent(struct btrfs_fs_info *fs_info,
 	if (ret > 0)
 		goto search;
 
-	if (ret == -ENOSPC) {
+	if (ret == -ENOSPC && !cache_block_group_error) {
 		/*
 		 * Use ffe_ctl->total_free_space as fallback if we can't find
 		 * any contiguous hole.
@@ -4037,6 +4051,8 @@ static noinline int find_free_extent(struct btrfs_fs_info *fs_info,
 		space_info->max_extent_size = ffe_ctl.max_extent_size;
 		spin_unlock(&space_info->lock);
 		ins->offset = ffe_ctl.max_extent_size;
+	} else if (ret == -ENOSPC) {
+		ret = cache_block_group_error;
 	}
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.4 098/187] Btrfs: fix hole extent items with a zero size after range cloning

[Sasha Levin]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit 147271e35ba267506dde6550f58ccf8d287db3ef ]

Normally when cloning a file range if we find an implicit hole at the end
of the range we assume it is because the NO_HOLES feature is enabled.
However that is not always the case. One well known case [1] is when we
have a power failure after mixing buffered and direct IO writes against
the same file.

In such cases we need to punch a hole in the destination file, and if
the NO_HOLES feature is not enabled, we need to insert explicit file
extent items to represent the hole. After commit 690a5dbfc51315
("Btrfs: fix ENOSPC errors, leading to transaction aborts, when cloning
extents"), we started to insert file extent items representing the hole
with an item size of 0, which is invalid and should be 53 bytes (the size
of a btrfs_file_extent_item structure), resulting in all sorts of
corruptions and invalid memory accesses. This is detected by the tree
checker when we attempt to write a leaf to disk.

The problem can be sporadically triggered by test case generic/561 from
fstests. That test case does not exercise power failure and creates a new
filesystem when it starts, so it does not use a filesystem created by any
previous test that tests power failure. However the test does both
buffered and direct IO writes (through fsstress) and it's precisely that
which is creating the implicit holes in files. That happens even before
the commit mentioned earlier. I need to investigate why we get those
implicit holes to check if there is a real problem or not. For now this
change fixes the regression of introducing file extent items with an item
size of 0 bytes.

Fix the issue by calling btrfs_punch_hole_range() without passing a
btrfs_clone_extent_info structure, which ensures file extent items are
inserted to represent the hole with a correct item size. We were passing
a btrfs_clone_extent_info with a value of 0 for its 'item_size' field,
which was causing the insertion of file extent items with an item size
of 0.

[1] https://www.spinics.net/lists/linux-btrfs/msg75350.html

Reported-by: David Sterba <dsterba@suse.com>
Fixes: 690a5dbfc51315 ("Btrfs: fix ENOSPC errors, leading to transaction aborts, when cloning extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/ioctl.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 23272d9154f3..9b48e21c2022 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -3721,24 +3721,18 @@ static int btrfs_clone(struct inode *src, struct inode *inode,
 	ret = 0;
 
 	if (last_dest_end < destoff + len) {
-		struct btrfs_clone_extent_info clone_info = { 0 };
 		/*
-		 * We have an implicit hole (NO_HOLES feature is enabled) that
-		 * fully or partially overlaps our cloning range at its end.
+		 * We have an implicit hole that fully or partially overlaps our
+		 * cloning range at its end. This means that we either have the
+		 * NO_HOLES feature enabled or the implicit hole happened due to
+		 * mixing buffered and direct IO writes against this file.
 		 */
 		btrfs_release_path(path);
 		path->leave_spinning = 0;
 
-		/*
-		 * We are dealing with a hole and our clone_info already has a
-		 * disk_offset of 0, we only need to fill the data length and
-		 * file offset.
-		 */
-		clone_info.data_len = destoff + len - last_dest_end;
-		clone_info.file_offset = last_dest_end;
 		ret = btrfs_punch_hole_range(inode, path,
 					     last_dest_end, destoff + len - 1,
-					     &clone_info, &trans);
+					     NULL, &trans);
 		if (ret)
 			goto out;
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 099/187] ocxl: Fix potential memory leak on context creation

[Sasha Levin]

From: Frederic Barrat <fbarrat@linux.ibm.com>

[ Upstream commit 913e73c77d48aeeb50c16450a653dca9c71ae2e2 ]

If we couldn't fully init a context, we were leaking memory.

Fixes: b9721d275cc2 ("ocxl: Allow external drivers to use OpenCAPI contexts")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191209105513.8566-1-fbarrat@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/ocxl/context.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/ocxl/context.c b/drivers/misc/ocxl/context.c
index 994563a078eb..de8a66b9d76b 100644
--- a/drivers/misc/ocxl/context.c
+++ b/drivers/misc/ocxl/context.c
@@ -10,18 +10,17 @@ int ocxl_context_alloc(struct ocxl_context **context, struct ocxl_afu *afu,
 	int pasid;
 	struct ocxl_context *ctx;
 
-	*context = kzalloc(sizeof(struct ocxl_context), GFP_KERNEL);
-	if (!*context)
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
 		return -ENOMEM;
 
-	ctx = *context;
-
 	ctx->afu = afu;
 	mutex_lock(&afu->contexts_lock);
 	pasid = idr_alloc(&afu->contexts_idr, ctx, afu->pasid_base,
 			afu->pasid_base + afu->pasid_max, GFP_KERNEL);
 	if (pasid < 0) {
 		mutex_unlock(&afu->contexts_lock);
+		kfree(ctx);
 		return pasid;
 	}
 	afu->pasid_count++;
@@ -43,6 +42,7 @@ int ocxl_context_alloc(struct ocxl_context **context, struct ocxl_afu *afu,
 	 * duration of the life of the context
 	 */
 	ocxl_afu_get(afu);
+	*context = ctx;
 	return 0;
 }
 EXPORT_SYMBOL_GPL(ocxl_context_alloc);
-- 
2.20.1

[PATCH AUTOSEL 5.4 099/187] ocxl: Fix potential memory leak on context creation

[Sasha Levin]

From: Frederic Barrat <fbarrat@linux.ibm.com>

[ Upstream commit 913e73c77d48aeeb50c16450a653dca9c71ae2e2 ]

If we couldn't fully init a context, we were leaking memory.

Fixes: b9721d275cc2 ("ocxl: Allow external drivers to use OpenCAPI contexts")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191209105513.8566-1-fbarrat@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/ocxl/context.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/ocxl/context.c b/drivers/misc/ocxl/context.c
index 994563a078eb..de8a66b9d76b 100644
--- a/drivers/misc/ocxl/context.c
+++ b/drivers/misc/ocxl/context.c
@@ -10,18 +10,17 @@ int ocxl_context_alloc(struct ocxl_context **context, struct ocxl_afu *afu,
 	int pasid;
 	struct ocxl_context *ctx;
 
-	*context = kzalloc(sizeof(struct ocxl_context), GFP_KERNEL);
-	if (!*context)
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
 		return -ENOMEM;
 
-	ctx = *context;
-
 	ctx->afu = afu;
 	mutex_lock(&afu->contexts_lock);
 	pasid = idr_alloc(&afu->contexts_idr, ctx, afu->pasid_base,
 			afu->pasid_base + afu->pasid_max, GFP_KERNEL);
 	if (pasid < 0) {
 		mutex_unlock(&afu->contexts_lock);
+		kfree(ctx);
 		return pasid;
 	}
 	afu->pasid_count++;
@@ -43,6 +42,7 @@ int ocxl_context_alloc(struct ocxl_context **context, struct ocxl_afu *afu,
 	 * duration of the life of the context
 	 */
 	ocxl_afu_get(afu);
+	*context = ctx;
 	return 0;
 }
 EXPORT_SYMBOL_GPL(ocxl_context_alloc);
-- 
2.20.1

[PATCH AUTOSEL 5.4 100/187] bpf: Clear skb->tstamp in bpf_redirect when necessary

[Sasha Levin]

From: Lorenz Bauer <lmb@cloudflare.com>

[ Upstream commit 5133498f4ad1123a5ffd4c08df6431dab882cc32 ]

Redirecting a packet from ingress to egress by using bpf_redirect
breaks if the egress interface has an fq qdisc installed. This is the same
problem as fixed in 'commit 8203e2d844d3 ("net: clear skb->tstamp in forwarding paths")

Clear skb->tstamp when redirecting into the egress path.

Fixes: 80b14dee2bea ("net: Add a new socket option for a future transmit time.")
Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20191213180817.2510-1-lmb@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/core/filter.c b/net/core/filter.c
index 6d0111bfdb4a..2f76461c120d 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -2055,6 +2055,7 @@ static inline int __bpf_tx_skb(struct net_device *dev, struct sk_buff *skb)
 	}
 
 	skb->dev = dev;
+	skb->tstamp = 0;
 
 	dev_xmit_recursion_inc();
 	ret = dev_queue_xmit(skb);
-- 
2.20.1

[PATCH AUTOSEL 5.4 101/187] bnxt: apply computed clamp value for coalece parameter

[Sasha Levin]

From: Jonathan Lemon <jonathan.lemon@gmail.com>

[ Upstream commit 6adc4601c2a1ac87b4ab8ed0cb55db6efd0264e8 ]

After executing "ethtool -C eth0 rx-usecs-irq 0", the box becomes
unresponsive, likely due to interrupt livelock.  It appears that
a minimum clamp value for the irq timer is computed, but is never
applied.

Fix by applying the corrected clamp value.

Fixes: 74706afa712d ("bnxt_en: Update interrupt coalescing logic.")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 04ec909e06df..d31637da2537 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -6170,7 +6170,7 @@ static void bnxt_hwrm_set_coal_params(struct bnxt *bp,
 		tmr = bnxt_usec_to_coal_tmr(bp, hw_coal->coal_ticks_irq);
 		val = clamp_t(u16, tmr, 1,
 			      coal_cap->cmpl_aggr_dma_tmr_during_int_max);
-		req->cmpl_aggr_dma_tmr_during_int = cpu_to_le16(tmr);
+		req->cmpl_aggr_dma_tmr_during_int = cpu_to_le16(val);
 		req->enables |=
 			cpu_to_le16(BNXT_COAL_CMPL_AGGR_TMR_DURING_INT_ENABLE);
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.4 102/187] ipv6/addrconf: only check invalid header values when NETLINK_F_STRICT_CHK is set

[Sasha Levin]

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 2beb6d2901a3f73106485d560c49981144aeacb1 ]

In commit 4b1373de73a3 ("net: ipv6: addr: perform strict checks also for
doit handlers") we add strict check for inet6_rtm_getaddr(). But we did
the invalid header values check before checking if NETLINK_F_STRICT_CHK
is set. This may break backwards compatibility if user already set the
ifm->ifa_prefixlen, ifm->ifa_flags, ifm->ifa_scope in their netlink code.

I didn't move the nlmsg_len check because I thought it's a valid check.

Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 4b1373de73a3 ("net: ipv6: addr: perform strict checks also for doit handlers")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/addrconf.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 34ccef18b40e..f9b5690e94fd 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -5231,16 +5231,16 @@ static int inet6_rtm_valid_getaddr_req(struct sk_buff *skb,
 		return -EINVAL;
 	}
 
+	if (!netlink_strict_get_check(skb))
+		return nlmsg_parse_deprecated(nlh, sizeof(*ifm), tb, IFA_MAX,
+					      ifa_ipv6_policy, extack);
+
 	ifm = nlmsg_data(nlh);
 	if (ifm->ifa_prefixlen || ifm->ifa_flags || ifm->ifa_scope) {
 		NL_SET_ERR_MSG_MOD(extack, "Invalid values in header for get address request");
 		return -EINVAL;
 	}
 
-	if (!netlink_strict_get_check(skb))
-		return nlmsg_parse_deprecated(nlh, sizeof(*ifm), tb, IFA_MAX,
-					      ifa_ipv6_policy, extack);
-
 	err = nlmsg_parse_deprecated_strict(nlh, sizeof(*ifm), tb, IFA_MAX,
 					    ifa_ipv6_policy, extack);
 	if (err)
-- 
2.20.1

[PATCH AUTOSEL 5.4 103/187] tcp/dccp: fix possible race __inet_lookup_established()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 8dbd76e79a16b45b2ccb01d2f2e08dbf64e71e40 ]

Michal Kubecek and Firo Yang did a very nice analysis of crashes
happening in __inet_lookup_established().

Since a TCP socket can go from TCP_ESTABLISH to TCP_LISTEN
(via a close()/socket()/listen() cycle) without a RCU grace period,
I should not have changed listeners linkage in their hash table.

They must use the nulls protocol (Documentation/RCU/rculist_nulls.txt),
so that a lookup can detect a socket in a hash list was moved in
another one.

Since we added code in commit d296ba60d8e2 ("soreuseport: Resolve
merge conflict for v4/v6 ordering fix"), we have to add
hlist_nulls_add_tail_rcu() helper.

Fixes: 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Reported-by: Firo Yang <firo.yang@suse.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/netdev/20191120083919.GH27852@unicorn.suse.cz/
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/rculist_nulls.h | 37 +++++++++++++++++++++++++++++++++++
 include/net/inet_hashtables.h | 12 +++++++++---
 include/net/sock.h            |  5 +++++
 net/ipv4/inet_diag.c          |  3 ++-
 net/ipv4/inet_hashtables.c    | 16 +++++++--------
 net/ipv4/tcp_ipv4.c           |  7 ++++---
 6 files changed, 65 insertions(+), 15 deletions(-)

diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h
index bc8206a8f30e..61974c4c566b 100644
--- a/include/linux/rculist_nulls.h
+++ b/include/linux/rculist_nulls.h
@@ -100,6 +100,43 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n,
 		first->pprev = &n->next;
 }
 
+/**
+ * hlist_nulls_add_tail_rcu
+ * @n: the element to add to the hash list.
+ * @h: the list to add to.
+ *
+ * Description:
+ * Adds the specified element to the specified hlist_nulls,
+ * while permitting racing traversals.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_nulls_add_head_rcu()
+ * or hlist_nulls_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_nulls_for_each_entry_rcu(), used to prevent memory-consistency
+ * problems on Alpha CPUs.  Regardless of the type of CPU, the
+ * list-traversal primitive must be guarded by rcu_read_lock().
+ */
+static inline void hlist_nulls_add_tail_rcu(struct hlist_nulls_node *n,
+					    struct hlist_nulls_head *h)
+{
+	struct hlist_nulls_node *i, *last = NULL;
+
+	/* Note: write side code, so rcu accessors are not needed. */
+	for (i = h->first; !is_a_nulls(i); i = i->next)
+		last = i;
+
+	if (last) {
+		n->next = last->next;
+		n->pprev = &last->next;
+		rcu_assign_pointer(hlist_next_rcu(last), n);
+	} else {
+		hlist_nulls_add_head_rcu(n, h);
+	}
+}
+
 /**
  * hlist_nulls_for_each_entry_rcu - iterate over rcu list of given type
  * @tpos:	the type * to use as a loop cursor.
diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h
index af2b4c065a04..d0019d3395cf 100644
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -103,13 +103,19 @@ struct inet_bind_hashbucket {
 	struct hlist_head	chain;
 };
 
-/*
- * Sockets can be hashed in established or listening table
+/* Sockets can be hashed in established or listening table.
+ * We must use different 'nulls' end-of-chain value for all hash buckets :
+ * A socket might transition from ESTABLISH to LISTEN state without
+ * RCU grace period. A lookup in ehash table needs to handle this case.
  */
+#define LISTENING_NULLS_BASE (1U << 29)
 struct inet_listen_hashbucket {
 	spinlock_t		lock;
 	unsigned int		count;
-	struct hlist_head	head;
+	union {
+		struct hlist_head	head;
+		struct hlist_nulls_head	nulls_head;
+	};
 };
 
 /* This is for listening sockets, thus all sockets which possess wildcards. */
diff --git a/include/net/sock.h b/include/net/sock.h
index 718e62fbe869..fe7cd6899cde 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -723,6 +723,11 @@ static inline void __sk_nulls_add_node_rcu(struct sock *sk, struct hlist_nulls_h
 	hlist_nulls_add_head_rcu(&sk->sk_nulls_node, list);
 }
 
+static inline void __sk_nulls_add_node_tail_rcu(struct sock *sk, struct hlist_nulls_head *list)
+{
+	hlist_nulls_add_tail_rcu(&sk->sk_nulls_node, list);
+}
+
 static inline void sk_nulls_add_node_rcu(struct sock *sk, struct hlist_nulls_head *list)
 {
 	sock_hold(sk);
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index 7dc79b973e6e..6a4c82f96e78 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -914,11 +914,12 @@ void inet_diag_dump_icsk(struct inet_hashinfo *hashinfo, struct sk_buff *skb,
 
 		for (i = s_i; i < INET_LHTABLE_SIZE; i++) {
 			struct inet_listen_hashbucket *ilb;
+			struct hlist_nulls_node *node;
 
 			num = 0;
 			ilb = &hashinfo->listening_hash[i];
 			spin_lock(&ilb->lock);
-			sk_for_each(sk, &ilb->head) {
+			sk_nulls_for_each(sk, node, &ilb->nulls_head) {
 				struct inet_sock *inet = inet_sk(sk);
 
 				if (!net_eq(sock_net(sk), net))
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 83fb00153018..2bbaaf0c7176 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -516,10 +516,11 @@ static int inet_reuseport_add_sock(struct sock *sk,
 				   struct inet_listen_hashbucket *ilb)
 {
 	struct inet_bind_bucket *tb = inet_csk(sk)->icsk_bind_hash;
+	const struct hlist_nulls_node *node;
 	struct sock *sk2;
 	kuid_t uid = sock_i_uid(sk);
 
-	sk_for_each_rcu(sk2, &ilb->head) {
+	sk_nulls_for_each_rcu(sk2, node, &ilb->nulls_head) {
 		if (sk2 != sk &&
 		    sk2->sk_family == sk->sk_family &&
 		    ipv6_only_sock(sk2) == ipv6_only_sock(sk) &&
@@ -555,9 +556,9 @@ int __inet_hash(struct sock *sk, struct sock *osk)
 	}
 	if (IS_ENABLED(CONFIG_IPV6) && sk->sk_reuseport &&
 		sk->sk_family == AF_INET6)
-		hlist_add_tail_rcu(&sk->sk_node, &ilb->head);
+		__sk_nulls_add_node_tail_rcu(sk, &ilb->nulls_head);
 	else
-		hlist_add_head_rcu(&sk->sk_node, &ilb->head);
+		__sk_nulls_add_node_rcu(sk, &ilb->nulls_head);
 	inet_hash2(hashinfo, sk);
 	ilb->count++;
 	sock_set_flag(sk, SOCK_RCU_FREE);
@@ -606,11 +607,9 @@ void inet_unhash(struct sock *sk)
 		reuseport_detach_sock(sk);
 	if (ilb) {
 		inet_unhash2(hashinfo, sk);
-		 __sk_del_node_init(sk);
-		 ilb->count--;
-	} else {
-		__sk_nulls_del_node_init_rcu(sk);
+		ilb->count--;
 	}
+	__sk_nulls_del_node_init_rcu(sk);
 	sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
 unlock:
 	spin_unlock_bh(lock);
@@ -750,7 +749,8 @@ void inet_hashinfo_init(struct inet_hashinfo *h)
 
 	for (i = 0; i < INET_LHTABLE_SIZE; i++) {
 		spin_lock_init(&h->listening_hash[i].lock);
-		INIT_HLIST_HEAD(&h->listening_hash[i].head);
+		INIT_HLIST_NULLS_HEAD(&h->listening_hash[i].nulls_head,
+				      i + LISTENING_NULLS_BASE);
 		h->listening_hash[i].count = 0;
 	}
 
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 67b2dc7a1727..eda64871f983 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2149,13 +2149,14 @@ static void *listening_get_next(struct seq_file *seq, void *cur)
 	struct tcp_iter_state *st = seq->private;
 	struct net *net = seq_file_net(seq);
 	struct inet_listen_hashbucket *ilb;
+	struct hlist_nulls_node *node;
 	struct sock *sk = cur;
 
 	if (!sk) {
 get_head:
 		ilb = &tcp_hashinfo.listening_hash[st->bucket];
 		spin_lock(&ilb->lock);
-		sk = sk_head(&ilb->head);
+		sk = sk_nulls_head(&ilb->nulls_head);
 		st->offset = 0;
 		goto get_sk;
 	}
@@ -2163,9 +2164,9 @@ static void *listening_get_next(struct seq_file *seq, void *cur)
 	++st->num;
 	++st->offset;
 
-	sk = sk_next(sk);
+	sk = sk_nulls_next(sk);
 get_sk:
-	sk_for_each_from(sk) {
+	sk_nulls_for_each_from(sk, node) {
 		if (!net_eq(sock_net(sk), net))
 			continue;
 		if (sk->sk_family == afinfo->family)
-- 
2.20.1

[PATCH AUTOSEL 5.4 104/187] 6pack,mkiss: fix possible deadlock

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 5c9934b6767b16ba60be22ec3cbd4379ad64170d ]

We got another syzbot report [1] that tells us we must use
write_lock_irq()/write_unlock_irq() to avoid possible deadlock.

[1]

WARNING: inconsistent lock state
5.5.0-rc1-syzkaller #0 Not tainted
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-R} usage.
syz-executor826/9605 [HC1[1]:SC0[0]:HE0:SE1] takes:
ffffffff8a128718 (disc_data_lock){+-..}, at: sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138
{HARDIRQ-ON-W} state was registered at:
  lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485
  __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
  _raw_write_lock_bh+0x33/0x50 kernel/locking/spinlock.c:319
  sixpack_close+0x1d/0x250 drivers/net/hamradio/6pack.c:657
  tty_ldisc_close.isra.0+0x119/0x1a0 drivers/tty/tty_ldisc.c:489
  tty_set_ldisc+0x230/0x6b0 drivers/tty/tty_ldisc.c:585
  tiocsetd drivers/tty/tty_io.c:2337 [inline]
  tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2597
  vfs_ioctl fs/ioctl.c:47 [inline]
  file_ioctl fs/ioctl.c:545 [inline]
  do_vfs_ioctl+0x977/0x14e0 fs/ioctl.c:732
  ksys_ioctl+0xab/0xd0 fs/ioctl.c:749
  __do_sys_ioctl fs/ioctl.c:756 [inline]
  __se_sys_ioctl fs/ioctl.c:754 [inline]
  __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:754
  do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
irq event stamp: 3946
hardirqs last  enabled at (3945): [<ffffffff87c86e43>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:168 [inline]
hardirqs last  enabled at (3945): [<ffffffff87c86e43>] _raw_spin_unlock_irq+0x23/0x80 kernel/locking/spinlock.c:199
hardirqs last disabled at (3946): [<ffffffff8100675f>] trace_hardirqs_off_thunk+0x1a/0x1c arch/x86/entry/thunk_64.S:42
softirqs last  enabled at (2658): [<ffffffff86a8b4df>] spin_unlock_bh include/linux/spinlock.h:383 [inline]
softirqs last  enabled at (2658): [<ffffffff86a8b4df>] clusterip_netdev_event+0x46f/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:222
softirqs last disabled at (2656): [<ffffffff86a8b22b>] spin_lock_bh include/linux/spinlock.h:343 [inline]
softirqs last disabled at (2656): [<ffffffff86a8b22b>] clusterip_netdev_event+0x1bb/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:196

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(disc_data_lock);
  <Interrupt>
    lock(disc_data_lock);

 *** DEADLOCK ***

5 locks held by syz-executor826/9605:
 #0: ffff8880a905e198 (&tty->legacy_mutex){+.+.}, at: tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19
 #1: ffffffff899a56c0 (rcu_read_lock){....}, at: mutex_spin_on_owner+0x0/0x330 kernel/locking/mutex.c:413
 #2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: spin_lock include/linux/spinlock.h:338 [inline]
 #2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: serial8250_interrupt+0x2d/0x1a0 drivers/tty/serial/8250/8250_core.c:116
 #3: ffffffff8c104048 (&port_lock_key){-.-.}, at: serial8250_handle_irq.part.0+0x24/0x330 drivers/tty/serial/8250/8250_port.c:1823
 #4: ffff8880a905e090 (&tty->ldisc_sem){++++}, at: tty_ldisc_ref+0x22/0x90 drivers/tty/tty_ldisc.c:288

stack backtrace:
CPU: 1 PID: 9605 Comm: syz-executor826 Not tainted 5.5.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 print_usage_bug.cold+0x327/0x378 kernel/locking/lockdep.c:3101
 valid_state kernel/locking/lockdep.c:3112 [inline]
 mark_lock_irq kernel/locking/lockdep.c:3309 [inline]
 mark_lock+0xbb4/0x1220 kernel/locking/lockdep.c:3666
 mark_usage kernel/locking/lockdep.c:3554 [inline]
 __lock_acquire+0x1e55/0x4a00 kernel/locking/lockdep.c:3909
 lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485
 __raw_read_lock include/linux/rwlock_api_smp.h:149 [inline]
 _raw_read_lock+0x32/0x50 kernel/locking/spinlock.c:223
 sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138
 sixpack_write_wakeup+0x25/0x340 drivers/net/hamradio/6pack.c:402
 tty_wakeup+0xe9/0x120 drivers/tty/tty_io.c:536
 tty_port_default_wakeup+0x2b/0x40 drivers/tty/tty_port.c:50
 tty_port_tty_wakeup+0x57/0x70 drivers/tty/tty_port.c:387
 uart_write_wakeup+0x46/0x70 drivers/tty/serial/serial_core.c:104
 serial8250_tx_chars+0x495/0xaf0 drivers/tty/serial/8250/8250_port.c:1761
 serial8250_handle_irq.part.0+0x2a2/0x330 drivers/tty/serial/8250/8250_port.c:1834
 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1820 [inline]
 serial8250_default_handle_irq+0xc0/0x150 drivers/tty/serial/8250/8250_port.c:1850
 serial8250_interrupt+0xf1/0x1a0 drivers/tty/serial/8250/8250_core.c:126
 __handle_irq_event_percpu+0x15d/0x970 kernel/irq/handle.c:149
 handle_irq_event_percpu+0x74/0x160 kernel/irq/handle.c:189
 handle_irq_event+0xa7/0x134 kernel/irq/handle.c:206
 handle_edge_irq+0x25e/0x8d0 kernel/irq/chip.c:830
 generic_handle_irq_desc include/linux/irqdesc.h:156 [inline]
 do_IRQ+0xde/0x280 arch/x86/kernel/irq.c:250
 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:607
 </IRQ>
RIP: 0010:cpu_relax arch/x86/include/asm/processor.h:685 [inline]
RIP: 0010:mutex_spin_on_owner+0x247/0x330 kernel/locking/mutex.c:579
Code: c3 be 08 00 00 00 4c 89 e7 e8 e5 06 59 00 4c 89 e0 48 c1 e8 03 42 80 3c 38 00 0f 85 e1 00 00 00 49 8b 04 24 a8 01 75 96 f3 90 <e9> 2f fe ff ff 0f 0b e8 0d 19 09 00 84 c0 0f 85 ff fd ff ff 48 c7
RSP: 0018:ffffc90001eafa20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffd7
RAX: 0000000000000000 RBX: ffff88809fd9e0c0 RCX: 1ffffffff13266dd
RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000000
RBP: ffffc90001eafa60 R08: 1ffff11013d22898 R09: ffffed1013d22899
R10: ffffed1013d22898 R11: ffff88809e9144c7 R12: ffff8880a905e138
R13: ffff88809e9144c0 R14: 0000000000000000 R15: dffffc0000000000
 mutex_optimistic_spin kernel/locking/mutex.c:673 [inline]
 __mutex_lock_common kernel/locking/mutex.c:962 [inline]
 __mutex_lock+0x32b/0x13c0 kernel/locking/mutex.c:1106
 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1121
 tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19
 tty_release+0xb5/0xe90 drivers/tty/tty_io.c:1665
 __fput+0x2ff/0x890 fs/file_table.c:280
 ____fput+0x16/0x20 fs/file_table.c:313
 task_work_run+0x145/0x1c0 kernel/task_work.c:113
 exit_task_work include/linux/task_work.h:22 [inline]
 do_exit+0x8e7/0x2ef0 kernel/exit.c:797
 do_group_exit+0x135/0x360 kernel/exit.c:895
 __do_sys_exit_group kernel/exit.c:906 [inline]
 __se_sys_exit_group kernel/exit.c:904 [inline]
 __x64_sys_exit_group+0x44/0x50 kernel/exit.c:904
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x43fef8
Code: Bad RIP value.
RSP: 002b:00007ffdb07d2338 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043fef8
RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000
RBP: 00000000004bf730 R08: 00000000000000e7 R09: ffffffffffffffd0
R10: 00000000004002c8 R11: 0000000000000246 R12: 0000000000000001
R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000

Fixes: 6e4e2f811bad ("6pack,mkiss: fix lock inconsistency")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hamradio/6pack.c | 4 ++--
 drivers/net/hamradio/mkiss.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 23281aeeb222..71d6629e65c9 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -654,10 +654,10 @@ static void sixpack_close(struct tty_struct *tty)
 {
 	struct sixpack *sp;
 
-	write_lock_bh(&disc_data_lock);
+	write_lock_irq(&disc_data_lock);
 	sp = tty->disc_data;
 	tty->disc_data = NULL;
-	write_unlock_bh(&disc_data_lock);
+	write_unlock_irq(&disc_data_lock);
 	if (!sp)
 		return;
 
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index c5bfa19ddb93..deef14215110 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -773,10 +773,10 @@ static void mkiss_close(struct tty_struct *tty)
 {
 	struct mkiss *ax;
 
-	write_lock_bh(&disc_data_lock);
+	write_lock_irq(&disc_data_lock);
 	ax = tty->disc_data;
 	tty->disc_data = NULL;
-	write_unlock_bh(&disc_data_lock);
+	write_unlock_irq(&disc_data_lock);
 
 	if (!ax)
 		return;
-- 
2.20.1

[PATCH AUTOSEL 5.4 105/187] habanalabs: rate limit error msg on waiting for CS

[Sasha Levin]

From: Oded Gabbay <oded.gabbay@gmail.com>

[ Upstream commit 018e0e3594f7dcd029d258e368c485e742fa9cdb ]

In case a user submits a CS, and the submission fails, and the user doesn't
check the return value and instead use the error return value as a valid
sequence number of a CS and ask to wait on it, the driver will print an
error and return an error code for that wait.

The real problem happens if now the user ignores the error of the wait, and
try to wait again and again. This can lead to a flood of error messages
from the driver and even soft lockup event.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/habanalabs/command_submission.c | 5 +++--
 drivers/misc/habanalabs/context.c            | 2 +-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/misc/habanalabs/command_submission.c b/drivers/misc/habanalabs/command_submission.c
index a9ac045dcfde..447f307ef4d6 100644
--- a/drivers/misc/habanalabs/command_submission.c
+++ b/drivers/misc/habanalabs/command_submission.c
@@ -777,8 +777,9 @@ int hl_cs_wait_ioctl(struct hl_fpriv *hpriv, void *data)
 	memset(args, 0, sizeof(*args));
 
 	if (rc < 0) {
-		dev_err(hdev->dev, "Error %ld on waiting for CS handle %llu\n",
-			rc, seq);
+		dev_err_ratelimited(hdev->dev,
+				"Error %ld on waiting for CS handle %llu\n",
+				rc, seq);
 		if (rc == -ERESTARTSYS) {
 			args->out.status = HL_WAIT_CS_STATUS_INTERRUPTED;
 			rc = -EINTR;
diff --git a/drivers/misc/habanalabs/context.c b/drivers/misc/habanalabs/context.c
index 17db7b3dfb4c..2df6fb87e7ff 100644
--- a/drivers/misc/habanalabs/context.c
+++ b/drivers/misc/habanalabs/context.c
@@ -176,7 +176,7 @@ struct dma_fence *hl_ctx_get_fence(struct hl_ctx *ctx, u64 seq)
 	spin_lock(&ctx->cs_lock);
 
 	if (seq >= ctx->cs_sequence) {
-		dev_notice(hdev->dev,
+		dev_notice_ratelimited(hdev->dev,
 			"Can't wait on seq %llu because current CS is at seq %llu\n",
 			seq, ctx->cs_sequence);
 		spin_unlock(&ctx->cs_lock);
-- 
2.20.1

[PATCH AUTOSEL 5.4 106/187] habanalabs: remove variable 'val' set but not used

[Sasha Levin]

From: Chen Wandun <chenwandun@huawei.com>

[ Upstream commit 68a1fdf2451f38b4ada0607eb6e1303f8a02e0b7 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/misc/habanalabs/goya/goya.c: In function goya_pldm_init_cpu:
drivers/misc/habanalabs/goya/goya.c:2195:6: warning: variable val set but not used [-Wunused-but-set-variable]
drivers/misc/habanalabs/goya/goya.c: In function goya_hw_init:
drivers/misc/habanalabs/goya/goya.c:2505:6: warning: variable val set but not used [-Wunused-but-set-variable]

Fixes: 9494a8dd8d22 ("habanalabs: add h/w queues module")
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/habanalabs/goya/goya.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index 6fba14b81f90..fe3574a83b7c 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -2171,7 +2171,7 @@ static int goya_push_linux_to_device(struct hl_device *hdev)
 
 static int goya_pldm_init_cpu(struct hl_device *hdev)
 {
-	u32 val, unit_rst_val;
+	u32 unit_rst_val;
 	int rc;
 
 	/* Must initialize SRAM scrambler before pushing u-boot to SRAM */
@@ -2179,14 +2179,14 @@ static int goya_pldm_init_cpu(struct hl_device *hdev)
 
 	/* Put ARM cores into reset */
 	WREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL, CPU_RESET_ASSERT);
-	val = RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
+	RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
 
 	/* Reset the CA53 MACRO */
 	unit_rst_val = RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
 	WREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N, CA53_RESET);
-	val = RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
+	RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
 	WREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N, unit_rst_val);
-	val = RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
+	RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
 
 	rc = goya_push_uboot_to_device(hdev);
 	if (rc)
@@ -2207,7 +2207,7 @@ static int goya_pldm_init_cpu(struct hl_device *hdev)
 	/* Release ARM core 0 from reset */
 	WREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL,
 					CPU_RESET_CORE0_DEASSERT);
-	val = RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
+	RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
 
 	return 0;
 }
@@ -2475,13 +2475,12 @@ int goya_mmu_init(struct hl_device *hdev)
 static int goya_hw_init(struct hl_device *hdev)
 {
 	struct asic_fixed_properties *prop = &hdev->asic_prop;
-	u32 val;
 	int rc;
 
 	dev_info(hdev->dev, "Starting initialization of H/W\n");
 
 	/* Perform read from the device to make sure device is up */
-	val = RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
+	RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
 
 	/*
 	 * Let's mark in the H/W that we have reached this point. We check
@@ -2533,7 +2532,7 @@ static int goya_hw_init(struct hl_device *hdev)
 		goto disable_queues;
 
 	/* Perform read from the device to flush all MSI-X configuration */
-	val = RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
+	RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
 
 	return 0;
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 107/187] net: marvell: mvpp2: phylink requires the link interrupt

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit f3f2364ea14d1cf6bf966542f31eadcf178f1577 ]

phylink requires the MAC to report when its link status changes when
operating in inband modes.  Failure to report link status changes
means that phylink has no idea when the link events happen, which
results in either the network interface's carrier remaining up or
remaining permanently down.

For example, with a fiber module, if the interface is brought up and
link is initially established, taking the link down at the far end
will cut the optical power.  The SFP module's LOS asserts, we
deactivate the link, and the network interface reports no carrier.

When the far end is brought back up, the SFP module's LOS deasserts,
but the MAC may be slower to establish link.  If this happens (which
in my tests is a certainty) then phylink never hears that the MAC
has established link with the far end, and the network interface is
stuck reporting no carrier.  This means the interface is
non-functional.

Avoiding the link interrupt when we have phylink is basically not
an option, so remove the !port->phylink from the test.

Fixes: 4bb043262878 ("net: mvpp2: phylink support")
Tested-by: Sven Auhagen <sven.auhagen@voleatech.de>
Tested-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 111b3b8239e1..ef44c6979a31 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -3674,7 +3674,7 @@ static int mvpp2_open(struct net_device *dev)
 		valid = true;
 	}
 
-	if (priv->hw_version == MVPP22 && port->link_irq && !port->phylink) {
+	if (priv->hw_version == MVPP22 && port->link_irq) {
 		err = request_irq(port->link_irq, mvpp2_link_status_isr, 0,
 				  dev->name, port);
 		if (err) {
-- 
2.20.1

[PATCH AUTOSEL 5.4 108/187] hv_netvsc: Fix tx_table init in rndis_set_subchannel()

[Sasha Levin]

From: Haiyang Zhang <haiyangz@microsoft.com>

[ Upstream commit c39ea5cba5a2e97fc01b78c85208bf31383b399c ]

Host can provide send indirection table messages anytime after RSS is
enabled by calling rndis_filter_set_rss_param(). So the host provided
table values may be overwritten by the initialization in
rndis_set_subchannel().

To prevent this problem, move the tx_table initialization before calling
rndis_filter_set_rss_param().

Fixes: a6fb6aa3cfa9 ("hv_netvsc: Set tx_table to equal weight after subchannels open")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hyperv/rndis_filter.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index abaf8156d19d..e3d3c9097ff1 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1165,6 +1165,9 @@ int rndis_set_subchannel(struct net_device *ndev,
 	wait_event(nvdev->subchan_open,
 		   atomic_read(&nvdev->open_chn) == nvdev->num_chn);
 
+	for (i = 0; i < VRSS_SEND_TAB_SIZE; i++)
+		ndev_ctx->tx_table[i] = i % nvdev->num_chn;
+
 	/* ignore failures from setting rss parameters, still have channels */
 	if (dev_info)
 		rndis_filter_set_rss_param(rdev, dev_info->rss_key);
@@ -1174,9 +1177,6 @@ int rndis_set_subchannel(struct net_device *ndev,
 	netif_set_real_num_tx_queues(ndev, nvdev->num_chn);
 	netif_set_real_num_rx_queues(ndev, nvdev->num_chn);
 
-	for (i = 0; i < VRSS_SEND_TAB_SIZE; i++)
-		ndev_ctx->tx_table[i] = i % nvdev->num_chn;
-
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 109/187] bnx2x: Do not handle requests from VFs after parity

[Sasha Levin]

From: Manish Chopra <manishc@marvell.com>

[ Upstream commit 7113f796bbbced2470cd6d7379d50d7a7a78bf34 ]

Parity error from the hardware will cause PF to lose the state
of their VFs due to PF's internal reload and hardware reset following
the parity error. Restrict any configuration request from the VFs after
the parity as it could cause unexpected hardware behavior, only way
for VFs to recover would be to trigger FLR on VFs and reload them.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c  | 12 ++++++++++--
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h |  1 +
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c  | 12 ++++++++++++
 3 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 192ff8d5da32..cff64e43bdd8 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -9976,10 +9976,18 @@ static void bnx2x_recovery_failed(struct bnx2x *bp)
  */
 static void bnx2x_parity_recover(struct bnx2x *bp)
 {
-	bool global = false;
 	u32 error_recovered, error_unrecovered;
-	bool is_parity;
+	bool is_parity, global = false;
+#ifdef CONFIG_BNX2X_SRIOV
+	int vf_idx;
+
+	for (vf_idx = 0; vf_idx < bp->requested_nr_virtfn; vf_idx++) {
+		struct bnx2x_virtf *vf = BP_VF(bp, vf_idx);
 
+		if (vf)
+			vf->state = VF_LOST;
+	}
+#endif
 	DP(NETIF_MSG_HW, "Handling parity\n");
 	while (1) {
 		switch (bp->recovery_state) {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
index b6ebd92ec565..3a716c015415 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
@@ -139,6 +139,7 @@ struct bnx2x_virtf {
 #define VF_ACQUIRED	1	/* VF acquired, but not initialized */
 #define VF_ENABLED	2	/* VF Enabled */
 #define VF_RESET	3	/* VF FLR'd, pending cleanup */
+#define VF_LOST		4	/* Recovery while VFs are loaded */
 
 	bool flr_clnup_stage;	/* true during flr cleanup */
 	bool malicious;		/* true if FW indicated so, until FLR */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
index 0752b7fa4d9c..ea0e9394f898 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -2107,6 +2107,18 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf,
 {
 	int i;
 
+	if (vf->state == VF_LOST) {
+		/* Just ack the FW and return if VFs are lost
+		 * in case of parity error. VFs are supposed to be timedout
+		 * on waiting for PF response.
+		 */
+		DP(BNX2X_MSG_IOV,
+		   "VF 0x%x lost, not handling the request\n", vf->abs_vfid);
+
+		storm_memset_vf_mbx_ack(bp, vf->abs_vfid);
+		return;
+	}
+
 	/* check if tlv type is known */
 	if (bnx2x_tlv_supported(mbx->first_tlv.tl.type)) {
 		/* Lock the per vf op mutex and note the locker's identity.
-- 
2.20.1

[PATCH AUTOSEL 5.4 110/187] bnx2x: Fix logic to get total no. of PFs per engine

[Sasha Levin]

From: Manish Chopra <manishc@marvell.com>

[ Upstream commit ee699f89bdbaa19c399804504241b5c531b48888 ]

Driver doesn't calculate total number of PFs configured on a
given engine correctly which messed up resources in the PFs
loaded on that engine, leading driver to exceed configuration
of resources (like vlan filters etc.) beyond the limit per
engine, which ended up with asserts from the firmware.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index 8b08cb18e363..3f63ffd7561b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -1109,7 +1109,7 @@ static inline u8 bnx2x_get_path_func_num(struct bnx2x *bp)
 		for (i = 0; i < E1H_FUNC_MAX / 2; i++) {
 			u32 func_config =
 				MF_CFG_RD(bp,
-					  func_mf_config[BP_PORT(bp) + 2 * i].
+					  func_mf_config[BP_PATH(bp) + 2 * i].
 					  config);
 			func_num +=
 				((func_config & FUNC_MF_CFG_FUNC_HIDE) ? 0 : 1);
-- 
2.20.1

[PATCH AUTOSEL 5.4 111/187] bonding: fix active-backup transition after link failure

[Sasha Levin]

From: Mahesh Bandewar <maheshb@google.com>

[ Upstream commit 5d485ed88d48f8101a2067348e267c0aaf4ed486 ]

After the recent fix in commit 1899bb325149 ("bonding: fix state
transition issue in link monitoring"), the active-backup mode with
miimon initially come-up fine but after a link-failure, both members
transition into backup state.

Following steps to reproduce the scenario (eth1 and eth2 are the
slaves of the bond):

    ip link set eth1 up
    ip link set eth2 down
    sleep 1
    ip link set eth2 up
    ip link set eth1 down
    cat /sys/class/net/eth1/bonding_slave/state
    cat /sys/class/net/eth2/bonding_slave/state

Fixes: 1899bb325149 ("bonding: fix state transition issue in link monitoring")
CC: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_main.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 62f65573eb04..92df47055d03 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2225,9 +2225,6 @@ static void bond_miimon_commit(struct bonding *bond)
 			} else if (BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
 				/* make it immediately active */
 				bond_set_active_slave(slave);
-			} else if (slave != primary) {
-				/* prevent it from being the active one */
-				bond_set_backup_slave(slave);
 			}
 
 			slave_info(bond->dev, slave->dev, "link status definitely up, %u Mbps %s duplex\n",
-- 
2.20.1

[PATCH AUTOSEL 5.4 112/187] gtp: do not allow adding duplicate tid and ms_addr pdp context

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 6b01b1d9b2d38dc84ac398bfe9f00baff06a31e5 ]

GTP RX packet path lookups pdp context with TID. If duplicate TID pdp
contexts are existing in the list, it couldn't select correct pdp context.
So, TID value  should be unique.
GTP TX packet path lookups pdp context with ms_addr. If duplicate ms_addr pdp
contexts are existing in the list, it couldn't select correct pdp context.
So, ms_addr value should be unique.

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/gtp.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index ecfe26215935..8b742edf793d 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -926,24 +926,31 @@ static void ipv4_pdp_fill(struct pdp_ctx *pctx, struct genl_info *info)
 	}
 }
 
-static int ipv4_pdp_add(struct gtp_dev *gtp, struct sock *sk,
-			struct genl_info *info)
+static int gtp_pdp_add(struct gtp_dev *gtp, struct sock *sk,
+		       struct genl_info *info)
 {
+	struct pdp_ctx *pctx, *pctx_tid = NULL;
 	struct net_device *dev = gtp->dev;
 	u32 hash_ms, hash_tid = 0;
-	struct pdp_ctx *pctx;
+	unsigned int version;
 	bool found = false;
 	__be32 ms_addr;
 
 	ms_addr = nla_get_be32(info->attrs[GTPA_MS_ADDRESS]);
 	hash_ms = ipv4_hashfn(ms_addr) % gtp->hash_size;
+	version = nla_get_u32(info->attrs[GTPA_VERSION]);
 
-	hlist_for_each_entry_rcu(pctx, &gtp->addr_hash[hash_ms], hlist_addr) {
-		if (pctx->ms_addr_ip4.s_addr == ms_addr) {
-			found = true;
-			break;
-		}
-	}
+	pctx = ipv4_pdp_find(gtp, ms_addr);
+	if (pctx)
+		found = true;
+	if (version == GTP_V0)
+		pctx_tid = gtp0_pdp_find(gtp,
+					 nla_get_u64(info->attrs[GTPA_TID]));
+	else if (version == GTP_V1)
+		pctx_tid = gtp1_pdp_find(gtp,
+					 nla_get_u32(info->attrs[GTPA_I_TEI]));
+	if (pctx_tid)
+		found = true;
 
 	if (found) {
 		if (info->nlhdr->nlmsg_flags & NLM_F_EXCL)
@@ -951,6 +958,11 @@ static int ipv4_pdp_add(struct gtp_dev *gtp, struct sock *sk,
 		if (info->nlhdr->nlmsg_flags & NLM_F_REPLACE)
 			return -EOPNOTSUPP;
 
+		if (pctx && pctx_tid)
+			return -EEXIST;
+		if (!pctx)
+			pctx = pctx_tid;
+
 		ipv4_pdp_fill(pctx, info);
 
 		if (pctx->gtp_version == GTP_V0)
@@ -1074,7 +1086,7 @@ static int gtp_genl_new_pdp(struct sk_buff *skb, struct genl_info *info)
 		goto out_unlock;
 	}
 
-	err = ipv4_pdp_add(gtp, sk, info);
+	err = gtp_pdp_add(gtp, sk, info);
 
 out_unlock:
 	rcu_read_unlock();
-- 
2.20.1

[PATCH AUTOSEL 5.4 113/187] gtp: fix wrong condition in gtp_genl_dump_pdp()

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 94a6d9fb88df43f92d943c32b84ce398d50bf49f ]

gtp_genl_dump_pdp() is ->dumpit() callback of GTP module and it is used
to dump pdp contexts. it would be re-executed because of dump packet size.

If dump packet size is too big, it saves current dump pointer
(gtp interface pointer, bucket, TID value) then it restarts dump from
last pointer.
Current GTP code allows adding zero TID pdp context but dump code
ignores zero TID value. So, last dump pointer will not be found.

In addition, this patch adds missing rcu_read_lock() in
gtp_genl_dump_pdp().

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/gtp.c | 36 +++++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 17 deletions(-)

diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 8b742edf793d..a010e0a11c33 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -38,7 +38,6 @@ struct pdp_ctx {
 	struct hlist_node	hlist_addr;
 
 	union {
-		u64		tid;
 		struct {
 			u64	tid;
 			u16	flow;
@@ -1244,43 +1243,46 @@ static int gtp_genl_dump_pdp(struct sk_buff *skb,
 				struct netlink_callback *cb)
 {
 	struct gtp_dev *last_gtp = (struct gtp_dev *)cb->args[2], *gtp;
+	int i, j, bucket = cb->args[0], skip = cb->args[1];
 	struct net *net = sock_net(skb->sk);
-	struct gtp_net *gn = net_generic(net, gtp_net_id);
-	unsigned long tid = cb->args[1];
-	int i, k = cb->args[0], ret;
 	struct pdp_ctx *pctx;
+	struct gtp_net *gn;
+
+	gn = net_generic(net, gtp_net_id);
 
 	if (cb->args[4])
 		return 0;
 
+	rcu_read_lock();
 	list_for_each_entry_rcu(gtp, &gn->gtp_dev_list, list) {
 		if (last_gtp && last_gtp != gtp)
 			continue;
 		else
 			last_gtp = NULL;
 
-		for (i = k; i < gtp->hash_size; i++) {
-			hlist_for_each_entry_rcu(pctx, &gtp->tid_hash[i], hlist_tid) {
-				if (tid && tid != pctx->u.tid)
-					continue;
-				else
-					tid = 0;
-
-				ret = gtp_genl_fill_info(skb,
-							 NETLINK_CB(cb->skb).portid,
-							 cb->nlh->nlmsg_seq,
-							 cb->nlh->nlmsg_type, pctx);
-				if (ret < 0) {
+		for (i = bucket; i < gtp->hash_size; i++) {
+			j = 0;
+			hlist_for_each_entry_rcu(pctx, &gtp->tid_hash[i],
+						 hlist_tid) {
+				if (j >= skip &&
+				    gtp_genl_fill_info(skb,
+					    NETLINK_CB(cb->skb).portid,
+					    cb->nlh->nlmsg_seq,
+					    cb->nlh->nlmsg_type, pctx)) {
 					cb->args[0] = i;
-					cb->args[1] = pctx->u.tid;
+					cb->args[1] = j;
 					cb->args[2] = (unsigned long)gtp;
 					goto out;
 				}
+				j++;
 			}
+			skip = 0;
 		}
+		bucket = 0;
 	}
 	cb->args[4] = 1;
 out:
+	rcu_read_unlock();
 	return skb->len;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 114/187] gtp: fix an use-after-free in ipv4_pdp_find()

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 94dc550a5062030569d4aa76e10e50c8fc001930 ]

ipv4_pdp_find() is called in TX packet path of GTP.
ipv4_pdp_find() internally uses gtp->tid_hash to lookup pdp context.
In the current code, gtp->tid_hash and gtp->addr_hash are freed by
->dellink(), which is gtp_dellink().
But gtp_dellink() would be called while packets are processing.
So, gtp_dellink() should not free gtp->tid_hash and gtp->addr_hash.
Instead, dev->priv_destructor() would be used because this callback
is called after all packet processing safely.

Test commands:
    ip link add veth1 type veth peer name veth2
    ip a a 172.0.0.1/24 dev veth1
    ip link set veth1 up
    ip a a 172.99.0.1/32 dev lo

    gtp-link add gtp1 &

    gtp-tunnel add gtp1 v1 200 100 172.99.0.2 172.0.0.2
    ip r a  172.99.0.2/32 dev gtp1
    ip link set gtp1 mtu 1500

    ip netns add ns2
    ip link set veth2 netns ns2
    ip netns exec ns2 ip a a 172.0.0.2/24 dev veth2
    ip netns exec ns2 ip link set veth2 up
    ip netns exec ns2 ip a a 172.99.0.2/32 dev lo
    ip netns exec ns2 ip link set lo up

    ip netns exec ns2 gtp-link add gtp2 &
    ip netns exec ns2 gtp-tunnel add gtp2 v1 100 200 172.99.0.1 172.0.0.1
    ip netns exec ns2 ip r a 172.99.0.1/32 dev gtp2
    ip netns exec ns2 ip link set gtp2 mtu 1500

    hping3 172.99.0.2 -2 --flood &
    ip link del gtp1

Splat looks like:
[   72.568081][ T1195] BUG: KASAN: use-after-free in ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.568916][ T1195] Read of size 8 at addr ffff8880b9a35d28 by task hping3/1195
[   72.569631][ T1195]
[   72.569861][ T1195] CPU: 2 PID: 1195 Comm: hping3 Not tainted 5.5.0-rc1 #199
[   72.570547][ T1195] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   72.571438][ T1195] Call Trace:
[   72.571764][ T1195]  dump_stack+0x96/0xdb
[   72.572171][ T1195]  ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.572761][ T1195]  print_address_description.constprop.5+0x1be/0x360
[   72.573400][ T1195]  ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.573971][ T1195]  ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.574544][ T1195]  __kasan_report+0x12a/0x16f
[   72.575014][ T1195]  ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.575593][ T1195]  kasan_report+0xe/0x20
[   72.576004][ T1195]  ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.576577][ T1195]  gtp_build_skb_ip4+0x199/0x1420 [gtp]
[ ... ]
[   72.647671][ T1195] BUG: unable to handle page fault for address: ffff8880b9a35d28
[   72.648512][ T1195] #PF: supervisor read access in kernel mode
[   72.649158][ T1195] #PF: error_code(0x0000) - not-present page
[   72.649849][ T1195] PGD a6c01067 P4D a6c01067 PUD 11fb07067 PMD 11f939067 PTE 800fffff465ca060
[   72.652958][ T1195] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[   72.653834][ T1195] CPU: 2 PID: 1195 Comm: hping3 Tainted: G    B             5.5.0-rc1 #199
[   72.668062][ T1195] RIP: 0010:ipv4_pdp_find.isra.12+0x86/0x170 [gtp]
[ ... ]
[   72.679168][ T1195] Call Trace:
[   72.679603][ T1195]  gtp_build_skb_ip4+0x199/0x1420 [gtp]
[   72.681915][ T1195]  ? ipv4_pdp_find.isra.12+0x170/0x170 [gtp]
[   72.682513][ T1195]  ? lock_acquire+0x164/0x3b0
[   72.682966][ T1195]  ? gtp_dev_xmit+0x35e/0x890 [gtp]
[   72.683481][ T1195]  gtp_dev_xmit+0x3c2/0x890 [gtp]
[ ... ]

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/gtp.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index a010e0a11c33..5450b1099c6d 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -640,9 +640,16 @@ static void gtp_link_setup(struct net_device *dev)
 }
 
 static int gtp_hashtable_new(struct gtp_dev *gtp, int hsize);
-static void gtp_hashtable_free(struct gtp_dev *gtp);
 static int gtp_encap_enable(struct gtp_dev *gtp, struct nlattr *data[]);
 
+static void gtp_destructor(struct net_device *dev)
+{
+	struct gtp_dev *gtp = netdev_priv(dev);
+
+	kfree(gtp->addr_hash);
+	kfree(gtp->tid_hash);
+}
+
 static int gtp_newlink(struct net *src_net, struct net_device *dev,
 		       struct nlattr *tb[], struct nlattr *data[],
 		       struct netlink_ext_ack *extack)
@@ -677,13 +684,15 @@ static int gtp_newlink(struct net *src_net, struct net_device *dev,
 
 	gn = net_generic(dev_net(dev), gtp_net_id);
 	list_add_rcu(&gtp->list, &gn->gtp_dev_list);
+	dev->priv_destructor = gtp_destructor;
 
 	netdev_dbg(dev, "registered new GTP interface\n");
 
 	return 0;
 
 out_hashtable:
-	gtp_hashtable_free(gtp);
+	kfree(gtp->addr_hash);
+	kfree(gtp->tid_hash);
 out_encap:
 	gtp_encap_disable(gtp);
 	return err;
@@ -692,8 +701,13 @@ static int gtp_newlink(struct net *src_net, struct net_device *dev,
 static void gtp_dellink(struct net_device *dev, struct list_head *head)
 {
 	struct gtp_dev *gtp = netdev_priv(dev);
+	struct pdp_ctx *pctx;
+	int i;
+
+	for (i = 0; i < gtp->hash_size; i++)
+		hlist_for_each_entry_rcu(pctx, &gtp->tid_hash[i], hlist_tid)
+			pdp_context_delete(pctx);
 
-	gtp_hashtable_free(gtp);
 	list_del_rcu(&gtp->list);
 	unregister_netdevice_queue(dev, head);
 }
@@ -771,20 +785,6 @@ static int gtp_hashtable_new(struct gtp_dev *gtp, int hsize)
 	return -ENOMEM;
 }
 
-static void gtp_hashtable_free(struct gtp_dev *gtp)
-{
-	struct pdp_ctx *pctx;
-	int i;
-
-	for (i = 0; i < gtp->hash_size; i++)
-		hlist_for_each_entry_rcu(pctx, &gtp->tid_hash[i], hlist_tid)
-			pdp_context_delete(pctx);
-
-	synchronize_rcu();
-	kfree(gtp->addr_hash);
-	kfree(gtp->tid_hash);
-}
-
 static struct sock *gtp_encap_enable_socket(int fd, int type,
 					    struct gtp_dev *gtp)
 {
-- 
2.20.1

[PATCH AUTOSEL 5.4 115/187] gtp: avoid zero size hashtable

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 6a902c0f31993ab02e1b6ea7085002b9c9083b6a ]

GTP default hashtable size is 1024 and userspace could set specific
hashtable size with IFLA_GTP_PDP_HASHSIZE. If hashtable size is set to 0
from userspace,  hashtable will not work and panic will occur.

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/gtp.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 5450b1099c6d..e5b7d6d2286e 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -667,10 +667,13 @@ static int gtp_newlink(struct net *src_net, struct net_device *dev,
 	if (err < 0)
 		return err;
 
-	if (!data[IFLA_GTP_PDP_HASHSIZE])
+	if (!data[IFLA_GTP_PDP_HASHSIZE]) {
 		hashsize = 1024;
-	else
+	} else {
 		hashsize = nla_get_u32(data[IFLA_GTP_PDP_HASHSIZE]);
+		if (!hashsize)
+			hashsize = 1024;
+	}
 
 	err = gtp_hashtable_new(gtp, hashsize);
 	if (err < 0)
-- 
2.20.1

[PATCH AUTOSEL 5.4 116/187] net: phylink: fix interface passed to mac_link_up

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 9b2079c046a9d6c9c73a4ec33816678565ee01f3 ]

A mismerge between the following two commits:

c678726305b9 ("net: phylink: ensure consistent phy interface mode")
27755ff88c0e ("net: phylink: Add phylink_mac_link_{up, down} wrapper functions")

resulted in the wrong interface being passed to the mac_link_up()
function. Fix this up.

Fixes: b4b12b0d2f02 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phylink.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 536236fdb232..bf5bbb565cf5 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -444,8 +444,7 @@ static void phylink_mac_link_up(struct phylink *pl,
 
 	pl->cur_interface = link_state.interface;
 	pl->ops->mac_link_up(pl->config, pl->link_an_mode,
-			     pl->phy_state.interface,
-			     pl->phydev);
+			     pl->cur_interface, pl->phydev);
 
 	if (ndev)
 		netif_carrier_on(ndev);
-- 
2.20.1

[PATCH AUTOSEL 5.4 117/187] net/smc: add fallback check to connect()

[Sasha Levin]

From: Ursula Braun <ubraun@linux.ibm.com>

[ Upstream commit 86434744fedf0cfe07a9eee3f4632c0e25c1d136 ]

FASTOPEN setsockopt() or sendmsg() may switch the SMC socket to fallback
mode. Once fallback mode is active, the native TCP socket functions are
called. Nevertheless there is a small race window, when FASTOPEN
setsockopt/sendmsg runs in parallel to a connect(), and switch the
socket into fallback mode before connect() takes the sock lock.
Make sure the SMC-specific connect setup is omitted in this case.

This way a syzbot-reported refcount problem is fixed, triggered by
different threads running non-blocking connect() and FASTOPEN_KEY
setsockopt.

Reported-by: syzbot+96d3f9ff6a86d37e44c8@syzkaller.appspotmail.com
Fixes: 6d6dd528d5af ("net/smc: fix refcount non-blocking connect() -part 2")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/smc/af_smc.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index 737b49909a7a..6a6d3b2aa5a9 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -854,6 +854,8 @@ static int smc_connect(struct socket *sock, struct sockaddr *addr,
 		goto out;
 
 	sock_hold(&smc->sk); /* sock put in passive closing */
+	if (smc->use_fallback)
+		goto out;
 	if (flags & O_NONBLOCK) {
 		if (schedule_work(&smc->connect_work))
 			smc->connect_nonblock = 1;
@@ -1716,8 +1718,6 @@ static int smc_setsockopt(struct socket *sock, int level, int optname,
 		sk->sk_err = smc->clcsock->sk->sk_err;
 		sk->sk_error_report(sk);
 	}
-	if (rc)
-		return rc;
 
 	if (optlen < sizeof(int))
 		return -EINVAL;
@@ -1725,6 +1725,8 @@ static int smc_setsockopt(struct socket *sock, int level, int optname,
 		return -EFAULT;
 
 	lock_sock(sk);
+	if (rc || smc->use_fallback)
+		goto out;
 	switch (optname) {
 	case TCP_ULP:
 	case TCP_FASTOPEN:
@@ -1736,15 +1738,14 @@ static int smc_setsockopt(struct socket *sock, int level, int optname,
 			smc_switch_to_fallback(smc);
 			smc->fallback_rsn = SMC_CLC_DECL_OPTUNSUPP;
 		} else {
-			if (!smc->use_fallback)
-				rc = -EINVAL;
+			rc = -EINVAL;
 		}
 		break;
 	case TCP_NODELAY:
 		if (sk->sk_state != SMC_INIT &&
 		    sk->sk_state != SMC_LISTEN &&
 		    sk->sk_state != SMC_CLOSED) {
-			if (val && !smc->use_fallback)
+			if (val)
 				mod_delayed_work(system_wq, &smc->conn.tx_work,
 						 0);
 		}
@@ -1753,7 +1754,7 @@ static int smc_setsockopt(struct socket *sock, int level, int optname,
 		if (sk->sk_state != SMC_INIT &&
 		    sk->sk_state != SMC_LISTEN &&
 		    sk->sk_state != SMC_CLOSED) {
-			if (!val && !smc->use_fallback)
+			if (!val)
 				mod_delayed_work(system_wq, &smc->conn.tx_work,
 						 0);
 		}
@@ -1764,6 +1765,7 @@ static int smc_setsockopt(struct socket *sock, int level, int optname,
 	default:
 		break;
 	}
+out:
 	release_sock(sk);
 
 	return rc;
-- 
2.20.1

[PATCH AUTOSEL 5.4 118/187] cxgb4: Fix kernel panic while accessing sge_info

[Sasha Levin]

From: Vishal Kulkarni <vishal@chelsio.com>

[ Upstream commit 479a0d1376f6d97c60871442911f1394d4446a25 ]

The sge_info debugfs collects offload queue info even when offload
capability is disabled and leads to panic.

[  144.139871] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  144.139874] CR2: 0000000000000000 CR3: 000000082d456005 CR4: 00000000001606e0
[  144.139876] Call Trace:
[  144.139887]  sge_queue_start+0x12/0x30 [cxgb4]
[  144.139897]  seq_read+0x1d4/0x3d0
[  144.139906]  full_proxy_read+0x50/0x70
[  144.139913]  vfs_read+0x89/0x140
[  144.139916]  ksys_read+0x55/0xd0
[  144.139924]  do_syscall_64+0x5b/0x1d0
[  144.139933]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  144.139936] RIP: 0033:0x7f4b01493990

Fix this crash by skipping the offload queue access in sge_qinfo when
offload capability is disabled

Signed-off-by: Herat Ramani <herat@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
index ae6a47dd7dc9..fb8ade9a05a9 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
@@ -2996,6 +2996,9 @@ static int sge_queue_entries(const struct adapter *adap)
 	int tot_uld_entries = 0;
 	int i;
 
+	if (!is_uld(adap))
+		goto lld_only;
+
 	mutex_lock(&uld_mutex);
 	for (i = 0; i < CXGB4_TX_MAX; i++)
 		tot_uld_entries += sge_qinfo_uld_txq_entries(adap, i);
@@ -3006,6 +3009,7 @@ static int sge_queue_entries(const struct adapter *adap)
 	}
 	mutex_unlock(&uld_mutex);
 
+lld_only:
 	return DIV_ROUND_UP(adap->sge.ethqsets, 4) +
 	       tot_uld_entries +
 	       DIV_ROUND_UP(MAX_CTRL_QUEUES, 4) + 1;
-- 
2.20.1

[PATCH AUTOSEL 5.4 119/187] net: usb: lan78xx: Fix error message format specifier

[Sasha Levin]

From: Cristian Birsan <cristian.birsan@microchip.com>

[ Upstream commit 858ce8ca62ea1530f2779d0e3f934b0176e663c3 ]

Display the return code as decimal integer.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/lan78xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 0becc79fd431..e3cdfdde2265 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -511,7 +511,7 @@ static int lan78xx_read_stats(struct lan78xx_net *dev,
 		}
 	} else {
 		netdev_warn(dev->net,
-			    "Failed to read stat ret = 0x%x", ret);
+			    "Failed to read stat ret = %d", ret);
 	}
 
 	kfree(stats);
-- 
2.20.1

[PATCH AUTOSEL 5.4 120/187] parisc: fix compilation when KEXEC=n and KEXEC_FILE=y

[Sasha Levin]

From: Sven Schnelle <svens@stackframe.org>

[ Upstream commit e16260c21f87b16a33ae8ecac9e8c79f3a8b89bd ]

Fix compilation when the CONFIG_KEXEC_FILE=y and
CONFIG_KEXEC=n.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/include/asm/kexec.h | 4 ----
 arch/parisc/kernel/Makefile     | 2 +-
 2 files changed, 1 insertion(+), 5 deletions(-)

diff --git a/arch/parisc/include/asm/kexec.h b/arch/parisc/include/asm/kexec.h
index a99ea747d7ed..87e174006995 100644
--- a/arch/parisc/include/asm/kexec.h
+++ b/arch/parisc/include/asm/kexec.h
@@ -2,8 +2,6 @@
 #ifndef _ASM_PARISC_KEXEC_H
 #define _ASM_PARISC_KEXEC_H
 
-#ifdef CONFIG_KEXEC
-
 /* Maximum physical address we can use pages from */
 #define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
 /* Maximum address we can reach in physical address mode */
@@ -32,6 +30,4 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
 
 #endif /* __ASSEMBLY__ */
 
-#endif /* CONFIG_KEXEC */
-
 #endif /* _ASM_PARISC_KEXEC_H */
diff --git a/arch/parisc/kernel/Makefile b/arch/parisc/kernel/Makefile
index 2663c8f8be11..068d90950d93 100644
--- a/arch/parisc/kernel/Makefile
+++ b/arch/parisc/kernel/Makefile
@@ -37,5 +37,5 @@ obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
 obj-$(CONFIG_JUMP_LABEL)		+= jump_label.o
 obj-$(CONFIG_KGDB)			+= kgdb.o
 obj-$(CONFIG_KPROBES)			+= kprobes.o
-obj-$(CONFIG_KEXEC)			+= kexec.o relocate_kernel.o
+obj-$(CONFIG_KEXEC_CORE)		+= kexec.o relocate_kernel.o
 obj-$(CONFIG_KEXEC_FILE)		+= kexec_file.o
-- 
2.20.1

[PATCH AUTOSEL 5.4 121/187] parisc: add missing __init annotation

[Sasha Levin]

From: Sven Schnelle <svens@stackframe.org>

[ Upstream commit aeea5eae4fd54e94d820ed17ea3b238160be723e ]

compilation failed with:

MODPOST vmlinux.o
WARNING: vmlinux.o(.text.unlikely+0xa0c): Section mismatch in reference from the function walk_lower_bus() to the function .init.text:walk_native_bus()
The function walk_lower_bus() references
the function __init walk_native_bus().
This is often because walk_lower_bus lacks a __init
annotation or the annotation of walk_native_bus is wrong.

FATAL: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
make[2]: *** [/home/svens/linux/parisc-linux/src/scripts/Makefile.modpost:64: __modpost] Error 1
make[1]: *** [/home/svens/linux/parisc-linux/src/Makefile:1077: vmlinux] Error 2
make[1]: Leaving directory '/home/svens/linux/parisc-linux/build'
make: *** [Makefile:179: sub-make] Error 2

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/kernel/drivers.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index 3b330e58a4f0..a6c9f49c6612 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -810,7 +810,7 @@ EXPORT_SYMBOL(device_to_hwpath);
 static void walk_native_bus(unsigned long io_io_low, unsigned long io_io_high,
                             struct device *parent);
 
-static void walk_lower_bus(struct parisc_device *dev)
+static void __init walk_lower_bus(struct parisc_device *dev)
 {
 	unsigned long io_io_low, io_io_high;
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 122/187] rfkill: Fix incorrect check to avoid NULL pointer dereference

[Sasha Levin]

From: Aditya Pakki <pakki001@umn.edu>

[ Upstream commit 6fc232db9e8cd50b9b83534de9cd91ace711b2d7 ]

In rfkill_register, the struct rfkill pointer is first derefernced
and then checked for NULL. This patch removes the BUG_ON and returns
an error to the caller in case rfkill is NULL.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Link: https://lore.kernel.org/r/20191215153409.21696-1-pakki001@umn.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rfkill/core.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index 0bf9bf1ceb8f..6c089320ae4f 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -1002,10 +1002,13 @@ static void rfkill_sync_work(struct work_struct *work)
 int __must_check rfkill_register(struct rfkill *rfkill)
 {
 	static unsigned long rfkill_no;
-	struct device *dev = &rfkill->dev;
+	struct device *dev;
 	int error;
 
-	BUG_ON(!rfkill);
+	if (!rfkill)
+		return -EINVAL;
+
+	dev = &rfkill->dev;
 
 	mutex_lock(&rfkill_global_mutex);
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 123/187] ASoC: wm8962: fix lambda value

[Sasha Levin]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit 556672d75ff486e0b6786056da624131679e0576 ]

According to user manual, it is required that FLL_LAMBDA > 0
in all cases (Integer and Franctional modes).

Fixes: 9a76f1ff6e29 ("ASoC: Add initial WM8962 CODEC driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1576065442-19763-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 3e5c69fbc33a..d9d59f45833f 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2788,7 +2788,7 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
 
 	if (target % Fref == 0) {
 		fll_div->theta = 0;
-		fll_div->lambda = 0;
+		fll_div->lambda = 1;
 	} else {
 		gcd_fll = gcd(target, fratio * Fref);
 
@@ -2858,7 +2858,7 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s
 		return -EINVAL;
 	}
 
-	if (fll_div.theta || fll_div.lambda)
+	if (fll_div.theta)
 		fll1 |= WM8962_FLL_FRAC;
 
 	/* Stop the FLL while we reconfigure */
-- 
2.20.1

[alsa-devel] [PATCH AUTOSEL 5.4 123/187] ASoC: wm8962: fix lambda value

[Sasha Levin]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit 556672d75ff486e0b6786056da624131679e0576 ]

According to user manual, it is required that FLL_LAMBDA > 0
in all cases (Integer and Franctional modes).

Fixes: 9a76f1ff6e29 ("ASoC: Add initial WM8962 CODEC driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1576065442-19763-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 3e5c69fbc33a..d9d59f45833f 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2788,7 +2788,7 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
 
 	if (target % Fref == 0) {
 		fll_div->theta = 0;
-		fll_div->lambda = 0;
+		fll_div->lambda = 1;
 	} else {
 		gcd_fll = gcd(target, fratio * Fref);
 
@@ -2858,7 +2858,7 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s
 		return -EINVAL;
 	}
 
-	if (fll_div.theta || fll_div.lambda)
+	if (fll_div.theta)
 		fll1 |= WM8962_FLL_FRAC;
 
 	/* Stop the FLL while we reconfigure */
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[PATCH AUTOSEL 5.4 124/187] regulator: rn5t618: fix module aliases

[Sasha Levin]

From: Andreas Kemnade <andreas@kemnade.info>

[ Upstream commit 62a1923cc8fe095912e6213ed5de27abbf1de77e ]

platform device aliases were missing, preventing
autoloading of module.

Fixes: 811b700630ff ("regulator: rn5t618: add driver for Ricoh RN5T618 regulators")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20191211221600.29438-1-andreas@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/rn5t618-regulator.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/regulator/rn5t618-regulator.c b/drivers/regulator/rn5t618-regulator.c
index eb807a059479..aa6e7c5341ce 100644
--- a/drivers/regulator/rn5t618-regulator.c
+++ b/drivers/regulator/rn5t618-regulator.c
@@ -148,6 +148,7 @@ static struct platform_driver rn5t618_regulator_driver = {
 
 module_platform_driver(rn5t618_regulator_driver);
 
+MODULE_ALIAS("platform:rn5t618-regulator");
 MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
 MODULE_DESCRIPTION("RN5T618 regulator driver");
 MODULE_LICENSE("GPL v2");
-- 
2.20.1

[PATCH AUTOSEL 5.4 125/187] spi: nxp-fspi: Ensure width is respected in spi-mem operations

[Sasha Levin]

From: Michael Walle <michael@walle.cc>

[ Upstream commit 007773e16a6f3f49d1439554078c3ba8af131998 ]

Make use of a core helper to ensure the desired width is respected
when calling spi-mem operators.

Otherwise only the SPI controller will be matched with the flash chip,
which might lead to wrong widths. Also consider the width specified by
the user in the device tree.

Fixes: a5356aef6a90 ("spi: spi-mem: Add driver for NXP FlexSPI controller")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20191211195730.26794-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-nxp-fspi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index 501b923f2c27..28ae5229f889 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -439,7 +439,7 @@ static bool nxp_fspi_supports_op(struct spi_mem *mem,
 	    op->data.nbytes > f->devtype_data->txfifo)
 		return false;
 
-	return true;
+	return spi_mem_default_supports_op(mem, op);
 }
 
 /* Instead of busy looping invoke readl_poll_timeout functionality. */
-- 
2.20.1

[PATCH AUTOSEL 5.4 126/187] powerpc: Fix __clear_user() with KUAP enabled

[Sasha Levin]

From: Andrew Donnellan <ajd@linux.ibm.com>

[ Upstream commit 61e3acd8c693a14fc69b824cb5b08d02cb90a6e7 ]

The KUAP implementation adds calls in clear_user() to enable and
disable access to userspace memory. However, it doesn't add these to
__clear_user(), which is used in the ptrace regset code.

As there's only one direct user of __clear_user() (the regset code),
and the time taken to set the AMR for KUAP purposes is going to
dominate the cost of a quick access_ok(), there's not much point
having a separate path.

Rename __clear_user() to __arch_clear_user(), and make __clear_user()
just call clear_user().

Reported-by: syzbot+f25ecf4b2982d8c7a640@syzkaller-ppc64.appspotmail.com
Reported-by: Daniel Axtens <dja@axtens.net>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection")
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
[mpe: Use __arch_clear_user() for the asm version like arm64 & nds32]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191209132221.15328-1-ajd@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/uaccess.h | 9 +++++++--
 arch/powerpc/lib/string_32.S       | 4 ++--
 arch/powerpc/lib/string_64.S       | 6 +++---
 3 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 15002b51ff18..c92fe7fe9692 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -401,7 +401,7 @@ copy_to_user_mcsafe(void __user *to, const void *from, unsigned long n)
 	return n;
 }
 
-extern unsigned long __clear_user(void __user *addr, unsigned long size);
+unsigned long __arch_clear_user(void __user *addr, unsigned long size);
 
 static inline unsigned long clear_user(void __user *addr, unsigned long size)
 {
@@ -409,12 +409,17 @@ static inline unsigned long clear_user(void __user *addr, unsigned long size)
 	might_fault();
 	if (likely(access_ok(addr, size))) {
 		allow_write_to_user(addr, size);
-		ret = __clear_user(addr, size);
+		ret = __arch_clear_user(addr, size);
 		prevent_write_to_user(addr, size);
 	}
 	return ret;
 }
 
+static inline unsigned long __clear_user(void __user *addr, unsigned long size)
+{
+	return clear_user(addr, size);
+}
+
 extern long strncpy_from_user(char *dst, const char __user *src, long count);
 extern __must_check long strnlen_user(const char __user *str, long n);
 
diff --git a/arch/powerpc/lib/string_32.S b/arch/powerpc/lib/string_32.S
index f69a6aab7bfb..1ddb26394e8a 100644
--- a/arch/powerpc/lib/string_32.S
+++ b/arch/powerpc/lib/string_32.S
@@ -17,7 +17,7 @@ CACHELINE_BYTES = L1_CACHE_BYTES
 LG_CACHELINE_BYTES = L1_CACHE_SHIFT
 CACHELINE_MASK = (L1_CACHE_BYTES-1)
 
-_GLOBAL(__clear_user)
+_GLOBAL(__arch_clear_user)
 /*
  * Use dcbz on the complete cache lines in the destination
  * to set them to zero.  This requires that the destination
@@ -87,4 +87,4 @@ _GLOBAL(__clear_user)
 	EX_TABLE(8b, 91b)
 	EX_TABLE(9b, 91b)
 
-EXPORT_SYMBOL(__clear_user)
+EXPORT_SYMBOL(__arch_clear_user)
diff --git a/arch/powerpc/lib/string_64.S b/arch/powerpc/lib/string_64.S
index 507b18b1660e..169872bc0892 100644
--- a/arch/powerpc/lib/string_64.S
+++ b/arch/powerpc/lib/string_64.S
@@ -17,7 +17,7 @@ PPC64_CACHES:
 	.section	".text"
 
 /**
- * __clear_user: - Zero a block of memory in user space, with less checking.
+ * __arch_clear_user: - Zero a block of memory in user space, with less checking.
  * @to:   Destination address, in user space.
  * @n:    Number of bytes to zero.
  *
@@ -58,7 +58,7 @@ err3;	stb	r0,0(r3)
 	mr	r3,r4
 	blr
 
-_GLOBAL_TOC(__clear_user)
+_GLOBAL_TOC(__arch_clear_user)
 	cmpdi	r4,32
 	neg	r6,r3
 	li	r0,0
@@ -181,4 +181,4 @@ err1;	dcbz	0,r3
 	cmpdi	r4,32
 	blt	.Lshort_clear
 	b	.Lmedium_clear
-EXPORT_SYMBOL(__clear_user)
+EXPORT_SYMBOL(__arch_clear_user)
-- 
2.20.1

[PATCH AUTOSEL 5.4 126/187] powerpc: Fix __clear_user() with KUAP enabled

[Sasha Levin]

From: Andrew Donnellan <ajd@linux.ibm.com>

[ Upstream commit 61e3acd8c693a14fc69b824cb5b08d02cb90a6e7 ]

The KUAP implementation adds calls in clear_user() to enable and
disable access to userspace memory. However, it doesn't add these to
__clear_user(), which is used in the ptrace regset code.

As there's only one direct user of __clear_user() (the regset code),
and the time taken to set the AMR for KUAP purposes is going to
dominate the cost of a quick access_ok(), there's not much point
having a separate path.

Rename __clear_user() to __arch_clear_user(), and make __clear_user()
just call clear_user().

Reported-by: syzbot+f25ecf4b2982d8c7a640@syzkaller-ppc64.appspotmail.com
Reported-by: Daniel Axtens <dja@axtens.net>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection")
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
[mpe: Use __arch_clear_user() for the asm version like arm64 & nds32]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191209132221.15328-1-ajd@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/uaccess.h | 9 +++++++--
 arch/powerpc/lib/string_32.S       | 4 ++--
 arch/powerpc/lib/string_64.S       | 6 +++---
 3 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 15002b51ff18..c92fe7fe9692 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -401,7 +401,7 @@ copy_to_user_mcsafe(void __user *to, const void *from, unsigned long n)
 	return n;
 }
 
-extern unsigned long __clear_user(void __user *addr, unsigned long size);
+unsigned long __arch_clear_user(void __user *addr, unsigned long size);
 
 static inline unsigned long clear_user(void __user *addr, unsigned long size)
 {
@@ -409,12 +409,17 @@ static inline unsigned long clear_user(void __user *addr, unsigned long size)
 	might_fault();
 	if (likely(access_ok(addr, size))) {
 		allow_write_to_user(addr, size);
-		ret = __clear_user(addr, size);
+		ret = __arch_clear_user(addr, size);
 		prevent_write_to_user(addr, size);
 	}
 	return ret;
 }
 
+static inline unsigned long __clear_user(void __user *addr, unsigned long size)
+{
+	return clear_user(addr, size);
+}
+
 extern long strncpy_from_user(char *dst, const char __user *src, long count);
 extern __must_check long strnlen_user(const char __user *str, long n);
 
diff --git a/arch/powerpc/lib/string_32.S b/arch/powerpc/lib/string_32.S
index f69a6aab7bfb..1ddb26394e8a 100644
--- a/arch/powerpc/lib/string_32.S
+++ b/arch/powerpc/lib/string_32.S
@@ -17,7 +17,7 @@ CACHELINE_BYTES = L1_CACHE_BYTES
 LG_CACHELINE_BYTES = L1_CACHE_SHIFT
 CACHELINE_MASK = (L1_CACHE_BYTES-1)
 
-_GLOBAL(__clear_user)
+_GLOBAL(__arch_clear_user)
 /*
  * Use dcbz on the complete cache lines in the destination
  * to set them to zero.  This requires that the destination
@@ -87,4 +87,4 @@ _GLOBAL(__clear_user)
 	EX_TABLE(8b, 91b)
 	EX_TABLE(9b, 91b)
 
-EXPORT_SYMBOL(__clear_user)
+EXPORT_SYMBOL(__arch_clear_user)
diff --git a/arch/powerpc/lib/string_64.S b/arch/powerpc/lib/string_64.S
index 507b18b1660e..169872bc0892 100644
--- a/arch/powerpc/lib/string_64.S
+++ b/arch/powerpc/lib/string_64.S
@@ -17,7 +17,7 @@ PPC64_CACHES:
 	.section	".text"
 
 /**
- * __clear_user: - Zero a block of memory in user space, with less checking.
+ * __arch_clear_user: - Zero a block of memory in user space, with less checking.
  * @to:   Destination address, in user space.
  * @n:    Number of bytes to zero.
  *
@@ -58,7 +58,7 @@ err3;	stb	r0,0(r3)
 	mr	r3,r4
 	blr
 
-_GLOBAL_TOC(__clear_user)
+_GLOBAL_TOC(__arch_clear_user)
 	cmpdi	r4,32
 	neg	r6,r3
 	li	r0,0
@@ -181,4 +181,4 @@ err1;	dcbz	0,r3
 	cmpdi	r4,32
 	blt	.Lshort_clear
 	b	.Lmedium_clear
-EXPORT_SYMBOL(__clear_user)
+EXPORT_SYMBOL(__arch_clear_user)
-- 
2.20.1

[PATCH AUTOSEL 5.4 127/187] clk: at91: fix possible deadlock

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 6956eb33abb5deab2cd916b4c31226b57736bc3c ]

Lockdep warns about a possible circular locking dependency because using
syscon_node_to_regmap() will make the created regmap get and enable the
first clock it can parse from the device tree. This clock is not needed to
access the registers and should not be enabled at that time.

Use the recently introduced device_node_to_regmap to solve that as it looks
up the regmap in the same list but doesn't care about the clocks.

Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/20191128102531.817549-1-alexandre.belloni@bootlin.com
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/at91/at91sam9260.c | 2 +-
 drivers/clk/at91/at91sam9rl.c  | 2 +-
 drivers/clk/at91/at91sam9x5.c  | 2 +-
 drivers/clk/at91/pmc.c         | 2 +-
 drivers/clk/at91/sama5d2.c     | 2 +-
 drivers/clk/at91/sama5d4.c     | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/at91/at91sam9260.c b/drivers/clk/at91/at91sam9260.c
index 0aabe49aed09..a9d4234758d7 100644
--- a/drivers/clk/at91/at91sam9260.c
+++ b/drivers/clk/at91/at91sam9260.c
@@ -348,7 +348,7 @@ static void __init at91sam926x_pmc_setup(struct device_node *np,
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/at91/at91sam9rl.c b/drivers/clk/at91/at91sam9rl.c
index 0ac34cdaa106..77fe83a73bf4 100644
--- a/drivers/clk/at91/at91sam9rl.c
+++ b/drivers/clk/at91/at91sam9rl.c
@@ -83,7 +83,7 @@ static void __init at91sam9rl_pmc_setup(struct device_node *np)
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/at91/at91sam9x5.c b/drivers/clk/at91/at91sam9x5.c
index 0855f3a80cc7..086cf0b4955c 100644
--- a/drivers/clk/at91/at91sam9x5.c
+++ b/drivers/clk/at91/at91sam9x5.c
@@ -146,7 +146,7 @@ static void __init at91sam9x5_pmc_setup(struct device_node *np,
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 0b03cfae3a9d..b71515acdec1 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -275,7 +275,7 @@ static int __init pmc_register_ops(void)
 
 	np = of_find_matching_node(NULL, sama5d2_pmc_dt_ids);
 
-	pmcreg = syscon_node_to_regmap(np);
+	pmcreg = device_node_to_regmap(np);
 	if (IS_ERR(pmcreg))
 		return PTR_ERR(pmcreg);
 
diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
index 0de1108737db..ff7e3f727082 100644
--- a/drivers/clk/at91/sama5d2.c
+++ b/drivers/clk/at91/sama5d2.c
@@ -162,7 +162,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/at91/sama5d4.c b/drivers/clk/at91/sama5d4.c
index 25b156d4e645..a6dee4a3b6e4 100644
--- a/drivers/clk/at91/sama5d4.c
+++ b/drivers/clk/at91/sama5d4.c
@@ -136,7 +136,7 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 127/187] clk: at91: fix possible deadlock

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 6956eb33abb5deab2cd916b4c31226b57736bc3c ]

Lockdep warns about a possible circular locking dependency because using
syscon_node_to_regmap() will make the created regmap get and enable the
first clock it can parse from the device tree. This clock is not needed to
access the registers and should not be enabled at that time.

Use the recently introduced device_node_to_regmap to solve that as it looks
up the regmap in the same list but doesn't care about the clocks.

Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/20191128102531.817549-1-alexandre.belloni@bootlin.com
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/at91/at91sam9260.c | 2 +-
 drivers/clk/at91/at91sam9rl.c  | 2 +-
 drivers/clk/at91/at91sam9x5.c  | 2 +-
 drivers/clk/at91/pmc.c         | 2 +-
 drivers/clk/at91/sama5d2.c     | 2 +-
 drivers/clk/at91/sama5d4.c     | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/at91/at91sam9260.c b/drivers/clk/at91/at91sam9260.c
index 0aabe49aed09..a9d4234758d7 100644
--- a/drivers/clk/at91/at91sam9260.c
+++ b/drivers/clk/at91/at91sam9260.c
@@ -348,7 +348,7 @@ static void __init at91sam926x_pmc_setup(struct device_node *np,
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/at91/at91sam9rl.c b/drivers/clk/at91/at91sam9rl.c
index 0ac34cdaa106..77fe83a73bf4 100644
--- a/drivers/clk/at91/at91sam9rl.c
+++ b/drivers/clk/at91/at91sam9rl.c
@@ -83,7 +83,7 @@ static void __init at91sam9rl_pmc_setup(struct device_node *np)
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/at91/at91sam9x5.c b/drivers/clk/at91/at91sam9x5.c
index 0855f3a80cc7..086cf0b4955c 100644
--- a/drivers/clk/at91/at91sam9x5.c
+++ b/drivers/clk/at91/at91sam9x5.c
@@ -146,7 +146,7 @@ static void __init at91sam9x5_pmc_setup(struct device_node *np,
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 0b03cfae3a9d..b71515acdec1 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -275,7 +275,7 @@ static int __init pmc_register_ops(void)
 
 	np = of_find_matching_node(NULL, sama5d2_pmc_dt_ids);
 
-	pmcreg = syscon_node_to_regmap(np);
+	pmcreg = device_node_to_regmap(np);
 	if (IS_ERR(pmcreg))
 		return PTR_ERR(pmcreg);
 
diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
index 0de1108737db..ff7e3f727082 100644
--- a/drivers/clk/at91/sama5d2.c
+++ b/drivers/clk/at91/sama5d2.c
@@ -162,7 +162,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/at91/sama5d4.c b/drivers/clk/at91/sama5d4.c
index 25b156d4e645..a6dee4a3b6e4 100644
--- a/drivers/clk/at91/sama5d4.c
+++ b/drivers/clk/at91/sama5d4.c
@@ -136,7 +136,7 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 128/187] net: dsa: b53: Fix egress flooding settings

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 63cc54a6f0736a432b04308a74677ab0ba8a58ee ]

There were several issues with 53568438e381 ("net: dsa: b53: Add support for port_egress_floods callback") that resulted in breaking connectivity for standalone ports:

- both user and CPU ports must allow unicast and multicast forwarding by
  default otherwise this just flat out breaks connectivity for
  standalone DSA ports
- IP multicast is treated similarly as multicast, but has separate
  control registers
- the UC, MC and IPMC lookup failure register offsets were wrong, and
  instead used bit values that are meaningful for the
  B53_IP_MULTICAST_CTRL register

Fixes: 53568438e381 ("net: dsa: b53: Add support for port_egress_floods callback")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/b53/b53_common.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index cc3536315eff..a7132c1593c3 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -347,7 +347,7 @@ static void b53_set_forwarding(struct b53_device *dev, int enable)
 	 * frames should be flooded or not.
 	 */
 	b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
-	mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN;
+	mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN;
 	b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
 }
 
@@ -526,6 +526,8 @@ int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 
 	cpu_port = ds->ports[port].cpu_dp->index;
 
+	b53_br_egress_floods(ds, port, true, true);
+
 	if (dev->ops->irq_enable)
 		ret = dev->ops->irq_enable(dev, port);
 	if (ret)
@@ -641,6 +643,8 @@ static void b53_enable_cpu_port(struct b53_device *dev, int port)
 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
 
 	b53_brcm_hdr_setup(dev->ds, port);
+
+	b53_br_egress_floods(dev->ds, port, true, true);
 }
 
 static void b53_enable_mib(struct b53_device *dev)
@@ -1766,19 +1770,26 @@ int b53_br_egress_floods(struct dsa_switch *ds, int port,
 	struct b53_device *dev = ds->priv;
 	u16 uc, mc;
 
-	b53_read16(dev, B53_CTRL_PAGE, B53_UC_FWD_EN, &uc);
+	b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc);
 	if (unicast)
 		uc |= BIT(port);
 	else
 		uc &= ~BIT(port);
-	b53_write16(dev, B53_CTRL_PAGE, B53_UC_FWD_EN, uc);
+	b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc);
+
+	b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc);
+	if (multicast)
+		mc |= BIT(port);
+	else
+		mc &= ~BIT(port);
+	b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc);
 
-	b53_read16(dev, B53_CTRL_PAGE, B53_MC_FWD_EN, &mc);
+	b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc);
 	if (multicast)
 		mc |= BIT(port);
 	else
 		mc &= ~BIT(port);
-	b53_write16(dev, B53_CTRL_PAGE, B53_MC_FWD_EN, mc);
+	b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc);
 
 	return 0;
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 129/187] net: gemini: Fix memory leak in gmac_setup_txqs

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit f37f710353677639bc5d37ee785335994adf2529 ]

In the implementation of gmac_setup_txqs() the allocated desc_ring is
leaked if TX queue base is not aligned. Release it via
dma_free_coherent.

Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cortina/gemini.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c
index a8f4c69252ff..2814b96751b4 100644
--- a/drivers/net/ethernet/cortina/gemini.c
+++ b/drivers/net/ethernet/cortina/gemini.c
@@ -576,6 +576,8 @@ static int gmac_setup_txqs(struct net_device *netdev)
 
 	if (port->txq_dma_base & ~DMA_Q_BASE_MASK) {
 		dev_warn(geth->dev, "TX queue base is not aligned\n");
+		dma_free_coherent(geth->dev, len * sizeof(*desc_ring),
+				  desc_ring, port->txq_dma_base);
 		kfree(skb_tab);
 		return -ENOMEM;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.4 129/187] net: gemini: Fix memory leak in gmac_setup_txqs

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit f37f710353677639bc5d37ee785335994adf2529 ]

In the implementation of gmac_setup_txqs() the allocated desc_ring is
leaked if TX queue base is not aligned. Release it via
dma_free_coherent.

Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cortina/gemini.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c
index a8f4c69252ff..2814b96751b4 100644
--- a/drivers/net/ethernet/cortina/gemini.c
+++ b/drivers/net/ethernet/cortina/gemini.c
@@ -576,6 +576,8 @@ static int gmac_setup_txqs(struct net_device *netdev)
 
 	if (port->txq_dma_base & ~DMA_Q_BASE_MASK) {
 		dev_warn(geth->dev, "TX queue base is not aligned\n");
+		dma_free_coherent(geth->dev, len * sizeof(*desc_ring),
+				  desc_ring, port->txq_dma_base);
 		kfree(skb_tab);
 		return -ENOMEM;
 	}
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 130/187] staging: axis-fifo: add unspecified HAS_IOMEM dependency

[Sasha Levin]

From: Brendan Higgins <brendanhiggins@google.com>

[ Upstream commit d3aa8de6b5d0853c43c616586b4e232aa1fa7de9 ]

Currently CONFIG_XIL_AXIS_FIFO=y implicitly depends on
CONFIG_HAS_IOMEM=y; consequently, on architectures without IOMEM we get
the following build error:

ld: drivers/staging/axis-fifo/axis-fifo.o: in function `axis_fifo_probe':
drivers/staging/axis-fifo/axis-fifo.c:809: undefined reference to `devm_ioremap_resource'

Fix the build error by adding the unspecified dependency.

Reported-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Link: https://lore.kernel.org/r/20191211192742.95699-7-brendanhiggins@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/axis-fifo/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/axis-fifo/Kconfig b/drivers/staging/axis-fifo/Kconfig
index 3fffe4d6f327..f180a8e9f58a 100644
--- a/drivers/staging/axis-fifo/Kconfig
+++ b/drivers/staging/axis-fifo/Kconfig
@@ -4,7 +4,7 @@
 #
 config XIL_AXIS_FIFO
 	tristate "Xilinx AXI-Stream FIFO IP core driver"
-	depends on OF
+	depends on OF && HAS_IOMEM
 	help
 	  This adds support for the Xilinx AXI-Stream FIFO IP core driver.
 	  The AXI Streaming FIFO allows memory mapped access to a AXI Streaming
-- 
2.20.1

[PATCH AUTOSEL 5.4 130/187] staging: axis-fifo: add unspecified HAS_IOMEM dependency

[Sasha Levin]

From: Brendan Higgins <brendanhiggins@google.com>

[ Upstream commit d3aa8de6b5d0853c43c616586b4e232aa1fa7de9 ]

Currently CONFIG_XIL_AXIS_FIFO=y implicitly depends on
CONFIG_HAS_IOMEM=y; consequently, on architectures without IOMEM we get
the following build error:

ld: drivers/staging/axis-fifo/axis-fifo.o: in function `axis_fifo_probe':
drivers/staging/axis-fifo/axis-fifo.c:809: undefined reference to `devm_ioremap_resource'

Fix the build error by adding the unspecified dependency.

Reported-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Link: https://lore.kernel.org/r/20191211192742.95699-7-brendanhiggins@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/axis-fifo/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/axis-fifo/Kconfig b/drivers/staging/axis-fifo/Kconfig
index 3fffe4d6f327..f180a8e9f58a 100644
--- a/drivers/staging/axis-fifo/Kconfig
+++ b/drivers/staging/axis-fifo/Kconfig
@@ -4,7 +4,7 @@
 #
 config XIL_AXIS_FIFO
 	tristate "Xilinx AXI-Stream FIFO IP core driver"
-	depends on OF
+	depends on OF && HAS_IOMEM
 	help
 	  This adds support for the Xilinx AXI-Stream FIFO IP core driver.
 	  The AXI Streaming FIFO allows memory mapped access to a AXI Streaming
-- 
2.20.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL 5.4 131/187] iommu/iova: Init the struct iova to fix the possible memleak

[Sasha Levin]

From: Xiaotao Yin <xiaotao.yin@windriver.com>

[ Upstream commit 472d26df5e8075eda677b6be730e0fbf434ff2a8 ]

During ethernet(Marvell octeontx2) set ring buffer test:
ethtool -G eth1 rx <rx ring size> tx <tx ring size>
following kmemleak will happen sometimes:

unreferenced object 0xffff000b85421340 (size 64):
  comm "ethtool", pid 867, jiffies 4295323539 (age 550.500s)
  hex dump (first 64 bytes):
    80 13 42 85 0b 00 ff ff ff ff ff ff ff ff ff ff  ..B.............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    ff ff ff ff ff ff ff ff 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000001b204ddf>] kmem_cache_alloc+0x1b0/0x350
    [<00000000d9ef2e50>] alloc_iova+0x3c/0x168
    [<00000000ea30f99d>] alloc_iova_fast+0x7c/0x2d8
    [<00000000b8bb2f1f>] iommu_dma_alloc_iova.isra.0+0x12c/0x138
    [<000000002f1a43b5>] __iommu_dma_map+0x8c/0xf8
    [<00000000ecde7899>] iommu_dma_map_page+0x98/0xf8
    [<0000000082004e59>] otx2_alloc_rbuf+0xf4/0x158
    [<000000002b107f6b>] otx2_rq_aura_pool_init+0x110/0x270
    [<00000000c3d563c7>] otx2_open+0x15c/0x734
    [<00000000a2f5f3a8>] otx2_dev_open+0x3c/0x68
    [<00000000456a98b5>] otx2_set_ringparam+0x1ac/0x1d4
    [<00000000f2fbb819>] dev_ethtool+0xb84/0x2028
    [<0000000069b67c5a>] dev_ioctl+0x248/0x3a0
    [<00000000af38663a>] sock_ioctl+0x280/0x638
    [<000000002582384c>] do_vfs_ioctl+0x8b0/0xa80
    [<000000004e1a2c02>] ksys_ioctl+0x84/0xb8

The reason:
When alloc_iova_mem() without initial with Zero, sometimes fpn_lo will
equal to IOVA_ANCHOR by chance, so when return with -ENOMEM(iova32_full)
from __alloc_and_insert_iova_range(), the new_iova will not be freed in
free_iova_mem().

Fixes: bb68b2fbfbd6 ("iommu/iova: Add rbtree anchor node")
Signed-off-by: Xiaotao Yin <xiaotao.yin@windriver.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/iova.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c
index 41c605b0058f..c7a914b9bbbc 100644
--- a/drivers/iommu/iova.c
+++ b/drivers/iommu/iova.c
@@ -233,7 +233,7 @@ static DEFINE_MUTEX(iova_cache_mutex);
 
 struct iova *alloc_iova_mem(void)
 {
-	return kmem_cache_alloc(iova_cache, GFP_ATOMIC);
+	return kmem_cache_zalloc(iova_cache, GFP_ATOMIC);
 }
 EXPORT_SYMBOL(alloc_iova_mem);
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 131/187] iommu/iova: Init the struct iova to fix the possible memleak

[Sasha Levin]

From: Xiaotao Yin <xiaotao.yin@windriver.com>

[ Upstream commit 472d26df5e8075eda677b6be730e0fbf434ff2a8 ]

During ethernet(Marvell octeontx2) set ring buffer test:
ethtool -G eth1 rx <rx ring size> tx <tx ring size>
following kmemleak will happen sometimes:

unreferenced object 0xffff000b85421340 (size 64):
  comm "ethtool", pid 867, jiffies 4295323539 (age 550.500s)
  hex dump (first 64 bytes):
    80 13 42 85 0b 00 ff ff ff ff ff ff ff ff ff ff  ..B.............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    ff ff ff ff ff ff ff ff 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000001b204ddf>] kmem_cache_alloc+0x1b0/0x350
    [<00000000d9ef2e50>] alloc_iova+0x3c/0x168
    [<00000000ea30f99d>] alloc_iova_fast+0x7c/0x2d8
    [<00000000b8bb2f1f>] iommu_dma_alloc_iova.isra.0+0x12c/0x138
    [<000000002f1a43b5>] __iommu_dma_map+0x8c/0xf8
    [<00000000ecde7899>] iommu_dma_map_page+0x98/0xf8
    [<0000000082004e59>] otx2_alloc_rbuf+0xf4/0x158
    [<000000002b107f6b>] otx2_rq_aura_pool_init+0x110/0x270
    [<00000000c3d563c7>] otx2_open+0x15c/0x734
    [<00000000a2f5f3a8>] otx2_dev_open+0x3c/0x68
    [<00000000456a98b5>] otx2_set_ringparam+0x1ac/0x1d4
    [<00000000f2fbb819>] dev_ethtool+0xb84/0x2028
    [<0000000069b67c5a>] dev_ioctl+0x248/0x3a0
    [<00000000af38663a>] sock_ioctl+0x280/0x638
    [<000000002582384c>] do_vfs_ioctl+0x8b0/0xa80
    [<000000004e1a2c02>] ksys_ioctl+0x84/0xb8

The reason:
When alloc_iova_mem() without initial with Zero, sometimes fpn_lo will
equal to IOVA_ANCHOR by chance, so when return with -ENOMEM(iova32_full)
from __alloc_and_insert_iova_range(), the new_iova will not be freed in
free_iova_mem().

Fixes: bb68b2fbfbd6 ("iommu/iova: Add rbtree anchor node")
Signed-off-by: Xiaotao Yin <xiaotao.yin@windriver.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/iova.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c
index 41c605b0058f..c7a914b9bbbc 100644
--- a/drivers/iommu/iova.c
+++ b/drivers/iommu/iova.c
@@ -233,7 +233,7 @@ static DEFINE_MUTEX(iova_cache_mutex);
 
 struct iova *alloc_iova_mem(void)
 {
-	return kmem_cache_alloc(iova_cache, GFP_ATOMIC);
+	return kmem_cache_zalloc(iova_cache, GFP_ATOMIC);
 }
 EXPORT_SYMBOL(alloc_iova_mem);
 
-- 
2.20.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH AUTOSEL 5.4 132/187] kconfig: don't crash on NULL expressions in expr_eq()

[Sasha Levin]

From: Thomas Hebb <tommyhebb@gmail.com>

[ Upstream commit 272a72103012862e3a24ea06635253ead0b6e808 ]

NULL expressions are taken to always be true, as implemented by the
expr_is_yes() macro and by several other functions in expr.c. As such,
they ought to be valid inputs to expr_eq(), which compares two
expressions.

Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kconfig/expr.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/scripts/kconfig/expr.c b/scripts/kconfig/expr.c
index 77ffff3a053c..9f1de58e9f0c 100644
--- a/scripts/kconfig/expr.c
+++ b/scripts/kconfig/expr.c
@@ -254,6 +254,13 @@ static int expr_eq(struct expr *e1, struct expr *e2)
 {
 	int res, old_count;
 
+	/*
+	 * A NULL expr is taken to be yes, but there's also a different way to
+	 * represent yes. expr_is_yes() checks for either representation.
+	 */
+	if (!e1 || !e2)
+		return expr_is_yes(e1) && expr_is_yes(e2);
+
 	if (e1->type != e2->type)
 		return 0;
 	switch (e1->type) {
-- 
2.20.1

Re: [PATCH AUTOSEL 5.4 005/187] ASoC: max98090: remove msleep in PLL unlocked workaround

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 520 bytes --]

On Fri, Dec 27, 2019 at 12:37:53PM -0500, Sasha Levin wrote:
> From: Tzung-Bi Shih <tzungbi@google.com>
> 
> [ Upstream commit acb874a7c049ec49d8fc66c893170fb42c01bdf7 ]
> 
> It was observed Baytrail-based chromebooks could cause continuous PLL
> unlocked when using playback stream and capture stream simultaneously.
> Specifically, starting a capture stream after started a playback stream.
> As a result, the audio data could corrupt or turn completely silent.

This causes regressions, don't backport it.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [alsa-devel] [PATCH AUTOSEL 5.4 005/187] ASoC: max98090: remove msleep in PLL unlocked workaround

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 520 bytes --]

On Fri, Dec 27, 2019 at 12:37:53PM -0500, Sasha Levin wrote:
> From: Tzung-Bi Shih <tzungbi@google.com>
> 
> [ Upstream commit acb874a7c049ec49d8fc66c893170fb42c01bdf7 ]
> 
> It was observed Baytrail-based chromebooks could cause continuous PLL
> unlocked when using playback stream and capture stream simultaneously.
> Specifically, starting a capture stream after started a playback stream.
> As a result, the audio data could corrupt or turn completely silent.

This causes regressions, don't backport it.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 161 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [PATCH AUTOSEL 5.4 006/187] ASoC: max98090: exit workaround earlier if PLL is locked

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 359 bytes --]

On Fri, Dec 27, 2019 at 12:37:54PM -0500, Sasha Levin wrote:
> From: Tzung-Bi Shih <tzungbi@google.com>
> 
> [ Upstream commit 6f49919d11690a9b5614445ba30fde18083fdd63 ]
> 
> According to the datasheet, PLL lock time typically takes 2 msec and
> at most takes 7 msec.

Same here and for the other max98090 patch - once things are
fixed it'll be OK.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [alsa-devel] [PATCH AUTOSEL 5.4 006/187] ASoC: max98090: exit workaround earlier if PLL is locked

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 359 bytes --]

On Fri, Dec 27, 2019 at 12:37:54PM -0500, Sasha Levin wrote:
> From: Tzung-Bi Shih <tzungbi@google.com>
> 
> [ Upstream commit 6f49919d11690a9b5614445ba30fde18083fdd63 ]
> 
> According to the datasheet, PLL lock time typically takes 2 msec and
> at most takes 7 msec.

Same here and for the other max98090 patch - once things are
fixed it'll be OK.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 161 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [PATCH AUTOSEL 5.4 056/187] Revert "iwlwifi: assign directly to iwl_trans->cfg in QuZ detection"

[Anders Kaseorg]

On 12/27/19 9:38 AM, Sasha Levin wrote:
> From: Anders Kaseorg <andersk@mit.edu>
> 
> [ Upstream commit db5cce1afc8d2475d2c1c37c2a8267dd0e151526 ]
> 
> This reverts commit 968dcfb4905245dc64d65312c0d17692fa087b99.
> 
> Both that commit and commit 809805a820c6445f7a701ded24fdc6bbc841d1e4
> attempted to fix the same bug (dead assignments to the local variable
> cfg), but they did so in incompatible ways. When they were both merged,
> independently of each other, the combination actually caused the bug to
> reappear, leading to a firmware crash on boot for some cards.
> 
> https://bugzilla.kernel.org/show_bug.cgi?id=205719
> 
> Signed-off-by: Anders Kaseorg <andersk@mit.edu>
> Acked-by: Luca Coelho <luciano.coelho@intel.com>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

This commit’s child 0df36b90c47d93295b7e393da2d961b2f3b6cde4 (part of
the same bug 205719) is now enqueued for v5.4, but this one doesn’t seem
to have made it yet, perhaps because I forgot to Cc: stable@ in the
commit message.  Can someone make sure this goes to v5.4 as well?  Luca
previously nominated it for v5.4 here:

https://patchwork.kernel.org/patch/11269985/#23032785

Anders

Re: [PATCH AUTOSEL 5.4 006/187] ASoC: max98090: exit workaround earlier if PLL is locked

[Sasha Levin]

On Fri, Dec 27, 2019 at 10:44:30PM +0000, Mark Brown wrote:
>On Fri, Dec 27, 2019 at 12:37:54PM -0500, Sasha Levin wrote:
>> From: Tzung-Bi Shih <tzungbi@google.com>
>>
>> [ Upstream commit 6f49919d11690a9b5614445ba30fde18083fdd63 ]
>>
>> According to the datasheet, PLL lock time typically takes 2 msec and
>> at most takes 7 msec.
>
>Same here and for the other max98090 patch - once things are
>fixed it'll be OK.

I've dropped both. Could you ping me when this is settled and I'll grab
these and any follow up fixes?

-- 
Thanks,
Sasha

Re: [alsa-devel] [PATCH AUTOSEL 5.4 006/187] ASoC: max98090: exit workaround earlier if PLL is locked

[Sasha Levin]

On Fri, Dec 27, 2019 at 10:44:30PM +0000, Mark Brown wrote:
>On Fri, Dec 27, 2019 at 12:37:54PM -0500, Sasha Levin wrote:
>> From: Tzung-Bi Shih <tzungbi@google.com>
>>
>> [ Upstream commit 6f49919d11690a9b5614445ba30fde18083fdd63 ]
>>
>> According to the datasheet, PLL lock time typically takes 2 msec and
>> at most takes 7 msec.
>
>Same here and for the other max98090 patch - once things are
>fixed it'll be OK.

I've dropped both. Could you ping me when this is settled and I'll grab
these and any follow up fixes?

-- 
Thanks,
Sasha
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [PATCH AUTOSEL 5.4 056/187] Revert "iwlwifi: assign directly to iwl_trans->cfg in QuZ detection"

[Sasha Levin]

On Sun, Dec 29, 2019 at 09:48:53PM -0800, Anders Kaseorg wrote:
>On 12/27/19 9:38 AM, Sasha Levin wrote:
>> From: Anders Kaseorg <andersk@mit.edu>
>>
>> [ Upstream commit db5cce1afc8d2475d2c1c37c2a8267dd0e151526 ]
>>
>> This reverts commit 968dcfb4905245dc64d65312c0d17692fa087b99.
>>
>> Both that commit and commit 809805a820c6445f7a701ded24fdc6bbc841d1e4
>> attempted to fix the same bug (dead assignments to the local variable
>> cfg), but they did so in incompatible ways. When they were both merged,
>> independently of each other, the combination actually caused the bug to
>> reappear, leading to a firmware crash on boot for some cards.
>>
>> https://bugzilla.kernel.org/show_bug.cgi?id=205719
>>
>> Signed-off-by: Anders Kaseorg <andersk@mit.edu>
>> Acked-by: Luca Coelho <luciano.coelho@intel.com>
>> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>This commit’s child 0df36b90c47d93295b7e393da2d961b2f3b6cde4 (part of
>the same bug 205719) is now enqueued for v5.4, but this one doesn’t seem
>to have made it yet, perhaps because I forgot to Cc: stable@ in the
>commit message.  Can someone make sure this goes to v5.4 as well?  Luca
>previously nominated it for v5.4 here:
>
>https://patchwork.kernel.org/patch/11269985/#23032785

Great to hear from you again Anders!

Yes, AUTOSEL runs on a slower cycle than patches tagged for stable.
Anyway, I've queued this patch up for the next release.

-- 
Thanks,
Sasha

Re: [PATCH AUTOSEL 5.4 008/187] mwifiex: fix possible heap overflow in mwifiex_process_country_ie()

[Brian Norris]

On Fri, Dec 27, 2019 at 9:59 AM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Ganapathi Bhat <gbhat@marvell.com>
>
> [ Upstream commit 3d94a4a8373bf5f45cf5f939e88b8354dbf2311b ]

FYI, this upstream commit has unbalanced locking. I've submitted a
followup here:

[PATCH] mwifiex: fix unbalanced locking in mwifiex_process_country_ie()
https://lkml.kernel.org/linux-wireless/20200106224212.189763-1-briannorris@chromium.org/T/#u
https://patchwork.kernel.org/patch/11320227/

I'd recommend holding off until that gets landed somewhere. (Same for
the AUTOSEL patches sent to other kernel branches.)

Regards,
Brian

Re: [PATCH AUTOSEL 5.4 008/187] mwifiex: fix possible heap overflow in mwifiex_process_country_ie()

[Sasha Levin]

On Mon, Jan 06, 2020 at 02:51:28PM -0800, Brian Norris wrote:
>On Fri, Dec 27, 2019 at 9:59 AM Sasha Levin <sashal@kernel.org> wrote:
>>
>> From: Ganapathi Bhat <gbhat@marvell.com>
>>
>> [ Upstream commit 3d94a4a8373bf5f45cf5f939e88b8354dbf2311b ]
>
>FYI, this upstream commit has unbalanced locking. I've submitted a
>followup here:
>
>[PATCH] mwifiex: fix unbalanced locking in mwifiex_process_country_ie()
>https://lkml.kernel.org/linux-wireless/20200106224212.189763-1-briannorris@chromium.org/T/#u
>https://patchwork.kernel.org/patch/11320227/
>
>I'd recommend holding off until that gets landed somewhere. (Same for
>the AUTOSEL patches sent to other kernel branches.)

I'll drop it for now, just ping us when the fix is in and we'll get both
patches queued back up.

-- 
Thanks,
Sasha

Re: [PATCH AUTOSEL 5.4 008/187] mwifiex: fix possible heap overflow in mwifiex_process_country_ie()

[Brian Norris]

On Thu, Jan 9, 2020 at 7:29 AM Sasha Levin <sashal@kernel.org> wrote:
> On Mon, Jan 06, 2020 at 02:51:28PM -0800, Brian Norris wrote:
> >I'd recommend holding off until that gets landed somewhere. (Same for
> >the AUTOSEL patches sent to other kernel branches.)
>
> I'll drop it for now, just ping us when the fix is in and we'll get both
> patches queued back up.

I'll try to do that. The maintainer is seemingly busy (likely
vacation), but I'll try to keep this in mind when they get back to me.

Thanks,
Brian

Re: [PATCH AUTOSEL 5.4 096/187] ARM: shmobile: defconfig: Restore debugfs support

[Geert Uytterhoeven]

Hi Sasha,

(replying with the same response to an email with broader audience)

On Fri, Dec 27, 2019 at 6:42 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Geert Uytterhoeven <geert+renesas@glider.be>
>
> [ Upstream commit fa2cdb1762d15f701b83efa60b04f0d04e71bf89 ]
>
> Since commit 0e4a459f56c32d3e ("tracing: Remove unnecessary DEBUG_FS
> dependency"), CONFIG_DEBUG_FS is no longer auto-enabled.  This breaks

AFAIK, that commit is not present in v5.4, and hasn't been backported yet.
So I don't think there is a need to backport this and all other fixes restoring
debugfs support in post-v5.4 kernels.

BTW, I noticed you plan to backport this "fix" not just to v5.4, but also
to v4.19?

> booting Debian 9, as systemd needs debugfs:
>
>     [FAILED] Failed to mount /sys/kernel/debug.
>     See 'systemctl status sys-kernel-debug.mount' for details.
>     [DEPEND] Dependency failed for Local File Systems.
>     ...
>     You are in emergGive root password for maintenance
>     (or press Control-D to continue):
>
> Fix this by enabling CONFIG_DEBUG_FS explicitly.
>
> See also commit 18977008f44c66bd ("ARM: multi_v7_defconfig: Restore
> debugfs support").
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Link: https://lore.kernel.org/r/20191209101327.26571-1-geert+renesas@glider.be
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  arch/arm/configs/shmobile_defconfig | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
> index c6c70355141c..7e7b678ae153 100644
> --- a/arch/arm/configs/shmobile_defconfig
> +++ b/arch/arm/configs/shmobile_defconfig
> @@ -215,4 +215,5 @@ CONFIG_DMA_CMA=y
>  CONFIG_CMA_SIZE_MBYTES=64
>  CONFIG_PRINTK_TIME=y
>  # CONFIG_ENABLE_MUST_CHECK is not set
> +CONFIG_DEBUG_FS=y
>  CONFIG_DEBUG_KERNEL=y

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH AUTOSEL 5.4 096/187] ARM: shmobile: defconfig: Restore debugfs support

[Geert Uytterhoeven]

Hi Sasha,

(replying with the same response to an email with broader audience)

On Fri, Dec 27, 2019 at 6:42 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Geert Uytterhoeven <geert+renesas@glider.be>
>
> [ Upstream commit fa2cdb1762d15f701b83efa60b04f0d04e71bf89 ]
>
> Since commit 0e4a459f56c32d3e ("tracing: Remove unnecessary DEBUG_FS
> dependency"), CONFIG_DEBUG_FS is no longer auto-enabled.  This breaks

AFAIK, that commit is not present in v5.4, and hasn't been backported yet.
So I don't think there is a need to backport this and all other fixes restoring
debugfs support in post-v5.4 kernels.

BTW, I noticed you plan to backport this "fix" not just to v5.4, but also
to v4.19?

> booting Debian 9, as systemd needs debugfs:
>
>     [FAILED] Failed to mount /sys/kernel/debug.
>     See 'systemctl status sys-kernel-debug.mount' for details.
>     [DEPEND] Dependency failed for Local File Systems.
>     ...
>     You are in emergGive root password for maintenance
>     (or press Control-D to continue):
>
> Fix this by enabling CONFIG_DEBUG_FS explicitly.
>
> See also commit 18977008f44c66bd ("ARM: multi_v7_defconfig: Restore
> debugfs support").
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Link: https://lore.kernel.org/r/20191209101327.26571-1-geert+renesas@glider.be
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  arch/arm/configs/shmobile_defconfig | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
> index c6c70355141c..7e7b678ae153 100644
> --- a/arch/arm/configs/shmobile_defconfig
> +++ b/arch/arm/configs/shmobile_defconfig
> @@ -215,4 +215,5 @@ CONFIG_DMA_CMA=y
>  CONFIG_CMA_SIZE_MBYTES=64
>  CONFIG_PRINTK_TIME=y
>  # CONFIG_ENABLE_MUST_CHECK is not set
> +CONFIG_DEBUG_FS=y
>  CONFIG_DEBUG_KERNEL=y

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 5.4 016/187] x86/intel: Disable HPET on Intel Ice Lake platforms

[Len Brown]

Can somebody point to an ICL system that is running production-level
firmware that exhibits this issue?

The hardware people are telling me that zero such systems should exist.

(The reported symptom that I've seen is that the TSC vs HPET
comparison fails, and Linux keeps the (bad) HPET and disables the
(good) TSC)

thanks,
-Len

On Fri, Dec 27, 2019 at 12:41 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Kai-Heng Feng <kai.heng.feng@canonical.com>
>
> [ Upstream commit e0748539e3d594dd26f0d27a270f14720b22a406 ]
>
> Like CFL and CFL-H, ICL SoC has skewed HPET timer once it hits PC10.
> So let's disable HPET on ICL.
>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> Cc: Linus Torvalds <torvalds@linux-foundation.org>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: bp@alien8.de
> Cc: feng.tang@intel.com
> Cc: harry.pan@intel.com
> Cc: hpa@zytor.com
> Link: https://lkml.kernel.org/r/20191129062303.18982-2-kai.heng.feng@canonical.com
> Signed-off-by: Ingo Molnar <mingo@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  arch/x86/kernel/early-quirks.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
> index 606711f5ebf8..2f9ec14be3b1 100644
> --- a/arch/x86/kernel/early-quirks.c
> +++ b/arch/x86/kernel/early-quirks.c
> @@ -714,6 +714,8 @@ static struct chipset early_qrk[] __initdata = {
>                 PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
>         { PCI_VENDOR_ID_INTEL, 0x3ec4,
>                 PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
> +       { PCI_VENDOR_ID_INTEL, 0x8a12,
> +               PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
>         { PCI_VENDOR_ID_BROADCOM, 0x4331,
>           PCI_CLASS_NETWORK_OTHER, PCI_ANY_ID, 0, apple_airport_reset},
>         {}
> --
> 2.20.1
>


-- 
Len Brown, Intel Open Source Technology Center

[PATCH AUTOSEL 5.4 002/187] spi: pxa2xx: Add support for Intel Jasper Lake

[Sasha Levin]

From: Jarkko Nikula <jarkko.nikula@linux.intel.com>

[ Upstream commit 9c7315c9fca5de203538163cf42699bb10328902 ]

LPSS SPI on Intel Jasper Lake is compatible with Intel Ice Lake which
follows Intel Cannon Lake. Add PCI IDs of Jasper Lake.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20191125125159.15404-1-jarkko.nikula@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index bb6a14d1ab0f..3580a551c038 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1441,6 +1441,10 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
 	{ PCI_VDEVICE(INTEL, 0x4b2a), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x4b2b), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x4b37), LPSS_BXT_SSP },
+	/* JSL */
+	{ PCI_VDEVICE(INTEL, 0x4daa), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0x4dab), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0x4dfb), LPSS_CNL_SSP },
 	/* APL */
 	{ PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },
-- 
2.20.1

[PATCH AUTOSEL 5.4 002/187] spi: pxa2xx: Add support for Intel Jasper Lake

[Sasha Levin]

From: Jarkko Nikula <jarkko.nikula@linux.intel.com>

[ Upstream commit 9c7315c9fca5de203538163cf42699bb10328902 ]

LPSS SPI on Intel Jasper Lake is compatible with Intel Ice Lake which
follows Intel Cannon Lake. Add PCI IDs of Jasper Lake.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20191125125159.15404-1-jarkko.nikula@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index bb6a14d1ab0f..3580a551c038 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1441,6 +1441,10 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
 	{ PCI_VDEVICE(INTEL, 0x4b2a), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x4b2b), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x4b37), LPSS_BXT_SSP },
+	/* JSL */
+	{ PCI_VDEVICE(INTEL, 0x4daa), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0x4dab), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0x4dfb), LPSS_CNL_SSP },
 	/* APL */
 	{ PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel