All of lore.kernel.org
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Eugeniu Rosca <erosca@de.adit-jv.com>,
	linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v2] pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers
Date: Mon, 30 Dec 2019 09:31:56 +0100	[thread overview]
Message-ID: <20191230083156.19191-1-geert+renesas@glider.be> (raw)

Despite using the same compatible values ("r8a7795"-based) because of
historical reasons, R-Car H3 ES1.x (R8A77950) and R-Car H3 ES2.0+
(R8A77951) are really different SoCs, with different part numbers, and
with different Pin Function Controller blocks.

Reflect this in the pinctrl configuration, by replacing the existing
CONFIG_PINCTRL_PFC_R8A7795 symbol by two new config symbols:
CONFIG_PINCTRL_PFC_R8A77950 and CONFIG_PINCTRL_PFC_R8A77951.  The latter
are selected automatically, depending on the soon-to-be-introduced
corresponding SoC-specific config options, and on the current common
config option, to relax dependencies.

Rename the individual pin control driver source files from
pfc-r8a7795-es1.c to pfc-r8a77950.c, and from pfc-r8a7795.c to
pfc-r8a77951.c, and make them truly independent.
As both SoCs share the same compatible value, special care must be taken
to match them to the correct pin control driver, if support for it is
included in the running kernel.

This will allow making support for early R-Car H3 revisions optional,
the largest share of which is taken by the pin control driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
To be queued in sh-pfc-for-v5.6.

This complements, but has no dependencies on "[PATCH 0/5] arm64:
renesas: Split/rename R-Car H3 support"
https://lore.kernel.org/linux-renesas-soc/20191217183841.432-1-geert+renesas@glider.be

v2:
  - Add Reviewed-by, Tested-by,
  - Reduce #ifdef clutter by marking r8a7795[01]_pinmux_info __weak, at
    the expense of adding an extra runtime check, increasing kernel size
    by 8 bytes.
---
 drivers/pinctrl/sh-pfc/Kconfig                | 10 +++-
 drivers/pinctrl/sh-pfc/Makefile               |  4 +-
 drivers/pinctrl/sh-pfc/core.c                 | 57 ++++++++++++++-----
 .../{pfc-r8a7795-es1.c => pfc-r8a77950.c}     | 26 ++++-----
 .../sh-pfc/{pfc-r8a7795.c => pfc-r8a77951.c}  | 39 +++++--------
 drivers/pinctrl/sh-pfc/sh_pfc.h               |  4 +-
 6 files changed, 81 insertions(+), 59 deletions(-)
 rename drivers/pinctrl/sh-pfc/{pfc-r8a7795-es1.c => pfc-r8a77950.c} (99%)
 rename drivers/pinctrl/sh-pfc/{pfc-r8a7795.c => pfc-r8a77951.c} (99%)

diff --git a/drivers/pinctrl/sh-pfc/Kconfig b/drivers/pinctrl/sh-pfc/Kconfig
index ecf3b045bf755008..cf0e0dc42b84c06f 100644
--- a/drivers/pinctrl/sh-pfc/Kconfig
+++ b/drivers/pinctrl/sh-pfc/Kconfig
@@ -26,7 +26,8 @@ config PINCTRL_SH_PFC
 	select PINCTRL_PFC_R8A7792 if ARCH_R8A7792
 	select PINCTRL_PFC_R8A7793 if ARCH_R8A7793
 	select PINCTRL_PFC_R8A7794 if ARCH_R8A7794
-	select PINCTRL_PFC_R8A7795 if ARCH_R8A7795
+	select PINCTRL_PFC_R8A77950 if ARCH_R8A77950 || ARCH_R8A7795
+	select PINCTRL_PFC_R8A77951 if ARCH_R8A77951 || ARCH_R8A7795
 	select PINCTRL_PFC_R8A77960 if ARCH_R8A77960
 	select PINCTRL_PFC_R8A77961 if ARCH_R8A77961
 	select PINCTRL_PFC_R8A77965 if ARCH_R8A77965
@@ -115,8 +116,11 @@ config PINCTRL_PFC_R8A7793
 config PINCTRL_PFC_R8A7794
 	bool "R-Car E2 pin control support" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A7795
-	bool "R-Car H3 pin control support" if COMPILE_TEST
+config PINCTRL_PFC_R8A77950
+	bool "R-Car H3 ES1.x pin control support" if COMPILE_TEST
+
+config PINCTRL_PFC_R8A77951
+	bool "R-Car H3 ES2.0+ pin control support" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A77960
 	bool "R-Car M3-W pin control support" if COMPILE_TEST
diff --git a/drivers/pinctrl/sh-pfc/Makefile b/drivers/pinctrl/sh-pfc/Makefile
index 3bc05666e1a6652e..9ebe321d24c488b0 100644
--- a/drivers/pinctrl/sh-pfc/Makefile
+++ b/drivers/pinctrl/sh-pfc/Makefile
@@ -18,8 +18,8 @@ obj-$(CONFIG_PINCTRL_PFC_R8A7791)	+= pfc-r8a7791.o
 obj-$(CONFIG_PINCTRL_PFC_R8A7792)	+= pfc-r8a7792.o
 obj-$(CONFIG_PINCTRL_PFC_R8A7793)	+= pfc-r8a7791.o
 obj-$(CONFIG_PINCTRL_PFC_R8A7794)	+= pfc-r8a7794.o
-obj-$(CONFIG_PINCTRL_PFC_R8A7795)	+= pfc-r8a7795.o
-obj-$(CONFIG_PINCTRL_PFC_R8A7795)	+= pfc-r8a7795-es1.o
+obj-$(CONFIG_PINCTRL_PFC_R8A77950)	+= pfc-r8a77950.o
+obj-$(CONFIG_PINCTRL_PFC_R8A77951)	+= pfc-r8a77951.o
 obj-$(CONFIG_PINCTRL_PFC_R8A77960)	+= pfc-r8a7796.o
 obj-$(CONFIG_PINCTRL_PFC_R8A77961)	+= pfc-r8a7796.o
 obj-$(CONFIG_PINCTRL_PFC_R8A77965)	+= pfc-r8a77965.o
diff --git a/drivers/pinctrl/sh-pfc/core.c b/drivers/pinctrl/sh-pfc/core.c
index 65e52688f0916cbf..82209116955b153a 100644
--- a/drivers/pinctrl/sh-pfc/core.c
+++ b/drivers/pinctrl/sh-pfc/core.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/psci.h>
 #include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include "core.h"
 
@@ -568,18 +569,18 @@ static const struct of_device_id sh_pfc_of_table[] = {
 		.data = &r8a7794_pinmux_info,
 	},
 #endif
-#ifdef CONFIG_PINCTRL_PFC_R8A7795
+/* Both r8a7795 entries must be present to make sanity checks work */
+#ifdef CONFIG_PINCTRL_PFC_R8A77950
 	{
 		.compatible = "renesas,pfc-r8a7795",
-		.data = &r8a7795_pinmux_info,
+		.data = &r8a77950_pinmux_info,
 	},
-#ifdef DEBUG
+#endif
+#ifdef CONFIG_PINCTRL_PFC_R8A77951
 	{
-		/* For sanity checks only (nothing matches against this) */
-		.compatible = "renesas,pfc-r8a77950",	/* R-Car H3 ES1.0 */
-		.data = &r8a7795es1_pinmux_info,
+		.compatible = "renesas,pfc-r8a7795",
+		.data = &r8a77951_pinmux_info,
 	},
-#endif /* DEBUG */
 #endif
 #ifdef CONFIG_PINCTRL_PFC_R8A77960
 	{
@@ -886,19 +887,49 @@ static void __init sh_pfc_check_driver(const struct platform_driver *pdrv)
 static inline void sh_pfc_check_driver(struct platform_driver *pdrv) {}
 #endif /* !DEBUG */
 
+#ifdef CONFIG_OF
+static const void *sh_pfc_quirk_match(void)
+{
+#if defined(CONFIG_PINCTRL_PFC_R8A77950) || \
+    defined(CONFIG_PINCTRL_PFC_R8A77951)
+	const struct soc_device_attribute *match;
+	static const struct soc_device_attribute quirks[] = {
+		{
+			.soc_id = "r8a7795", .revision = "ES1.*",
+			.data = &r8a77950_pinmux_info,
+		},
+		{
+			.soc_id = "r8a7795",
+			.data = &r8a77951_pinmux_info,
+		},
+
+		{ /* sentinel */ }
+	};
+
+	match = soc_device_match(quirks);
+	if (match)
+		return match->data ?: ERR_PTR(-ENODEV);
+#endif /* CONFIG_PINCTRL_PFC_R8A77950 || CONFIG_PINCTRL_PFC_R8A77951 */
+
+	return NULL;
+}
+#endif /* CONFIG_OF */
+
 static int sh_pfc_probe(struct platform_device *pdev)
 {
-#ifdef CONFIG_OF
-	struct device_node *np = pdev->dev.of_node;
-#endif
 	const struct sh_pfc_soc_info *info;
 	struct sh_pfc *pfc;
 	int ret;
 
 #ifdef CONFIG_OF
-	if (np)
-		info = of_device_get_match_data(&pdev->dev);
-	else
+	if (pdev->dev.of_node) {
+		info = sh_pfc_quirk_match();
+		if (IS_ERR(info))
+			return PTR_ERR(info);
+
+		if (!info)
+			info = of_device_get_match_data(&pdev->dev);
+	} else
 #endif
 		info = (const void *)platform_get_device_id(pdev)->driver_data;
 
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c b/drivers/pinctrl/sh-pfc/pfc-r8a77950.c
similarity index 99%
rename from drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
rename to drivers/pinctrl/sh-pfc/pfc-r8a77950.c
index ad05da8f65161c3d..04812e62f3a476a8 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77950.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * R8A7795 ES1.x processor support - PFC hardware block.
+ * R8A77950 processor support - PFC hardware block.
  *
  * Copyright (C) 2015-2017  Renesas Electronics Corporation
  */
@@ -5562,8 +5562,8 @@ static const struct pinmux_ioctrl_reg pinmux_ioctrl_regs[] = {
 	{ /* sentinel */ },
 };
 
-static int r8a7795es1_pin_to_pocctrl(struct sh_pfc *pfc, unsigned int pin,
-				     u32 *pocctrl)
+static int r8a77950_pin_to_pocctrl(struct sh_pfc *pfc, unsigned int pin,
+				   u32 *pocctrl)
 {
 	int bit = -EINVAL;
 
@@ -5820,8 +5820,8 @@ static const struct pinmux_bias_reg pinmux_bias_regs[] = {
 	{ /* sentinel */ },
 };
 
-static unsigned int r8a7795es1_pinmux_get_bias(struct sh_pfc *pfc,
-					       unsigned int pin)
+static unsigned int r8a77950_pinmux_get_bias(struct sh_pfc *pfc,
+					     unsigned int pin)
 {
 	const struct pinmux_bias_reg *reg;
 	unsigned int bit;
@@ -5838,8 +5838,8 @@ static unsigned int r8a7795es1_pinmux_get_bias(struct sh_pfc *pfc,
 		return PIN_CONFIG_BIAS_PULL_DOWN;
 }
 
-static void r8a7795es1_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin,
-				       unsigned int bias)
+static void r8a77950_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin,
+				     unsigned int bias)
 {
 	const struct pinmux_bias_reg *reg;
 	u32 enable, updown;
@@ -5861,15 +5861,15 @@ static void r8a7795es1_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin,
 	sh_pfc_write(pfc, reg->puen, enable);
 }
 
-static const struct sh_pfc_soc_operations r8a7795es1_pinmux_ops = {
-	.pin_to_pocctrl = r8a7795es1_pin_to_pocctrl,
-	.get_bias = r8a7795es1_pinmux_get_bias,
-	.set_bias = r8a7795es1_pinmux_set_bias,
+static const struct sh_pfc_soc_operations r8a77950_pinmux_ops = {
+	.pin_to_pocctrl = r8a77950_pin_to_pocctrl,
+	.get_bias = r8a77950_pinmux_get_bias,
+	.set_bias = r8a77950_pinmux_set_bias,
 };
 
-const struct sh_pfc_soc_info r8a7795es1_pinmux_info = {
+const struct sh_pfc_soc_info r8a77950_pinmux_info = {
 	.name = "r8a77950_pfc",
-	.ops = &r8a7795es1_pinmux_ops,
+	.ops = &r8a77950_pinmux_ops,
 	.unlock_reg = 0xe6060000, /* PMMR */
 
 	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a77951.c
similarity index 99%
rename from drivers/pinctrl/sh-pfc/pfc-r8a7795.c
rename to drivers/pinctrl/sh-pfc/pfc-r8a77951.c
index d3145aa135d0fdcd..256fab4b03d35621 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77951.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * R8A7795 ES2.0+ processor support - PFC hardware block.
+ * R8A77951 processor support - PFC hardware block.
  *
  * Copyright (C) 2015-2019 Renesas Electronics Corporation
  */
@@ -5915,7 +5915,8 @@ static const struct pinmux_ioctrl_reg pinmux_ioctrl_regs[] = {
 	{ /* sentinel */ },
 };
 
-static int r8a7795_pin_to_pocctrl(struct sh_pfc *pfc, unsigned int pin, u32 *pocctrl)
+static int r8a77951_pin_to_pocctrl(struct sh_pfc *pfc,
+				   unsigned int pin, u32 *pocctrl)
 {
 	int bit = -EINVAL;
 
@@ -6172,8 +6173,8 @@ static const struct pinmux_bias_reg pinmux_bias_regs[] = {
 	{ /* sentinel */ },
 };
 
-static unsigned int r8a7795_pinmux_get_bias(struct sh_pfc *pfc,
-					    unsigned int pin)
+static unsigned int r8a77951_pinmux_get_bias(struct sh_pfc *pfc,
+					     unsigned int pin)
 {
 	const struct pinmux_bias_reg *reg;
 	unsigned int bit;
@@ -6190,8 +6191,8 @@ static unsigned int r8a7795_pinmux_get_bias(struct sh_pfc *pfc,
 		return PIN_CONFIG_BIAS_PULL_DOWN;
 }
 
-static void r8a7795_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin,
-				   unsigned int bias)
+static void r8a77951_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin,
+				     unsigned int bias)
 {
 	const struct pinmux_bias_reg *reg;
 	u32 enable, updown;
@@ -6213,29 +6214,15 @@ static void r8a7795_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin,
 	sh_pfc_write(pfc, reg->puen, enable);
 }
 
-static const struct soc_device_attribute r8a7795es1[] = {
-	{ .soc_id = "r8a7795", .revision = "ES1.*" },
-	{ /* sentinel */ }
+static const struct sh_pfc_soc_operations r8a77951_pinmux_ops = {
+	.pin_to_pocctrl = r8a77951_pin_to_pocctrl,
+	.get_bias = r8a77951_pinmux_get_bias,
+	.set_bias = r8a77951_pinmux_set_bias,
 };
 
-static int r8a7795_pinmux_init(struct sh_pfc *pfc)
-{
-	if (soc_device_match(r8a7795es1))
-		pfc->info = &r8a7795es1_pinmux_info;
-
-	return 0;
-}
-
-static const struct sh_pfc_soc_operations r8a7795_pinmux_ops = {
-	.init = r8a7795_pinmux_init,
-	.pin_to_pocctrl = r8a7795_pin_to_pocctrl,
-	.get_bias = r8a7795_pinmux_get_bias,
-	.set_bias = r8a7795_pinmux_set_bias,
-};
-
-const struct sh_pfc_soc_info r8a7795_pinmux_info = {
+const struct sh_pfc_soc_info r8a77951_pinmux_info = {
 	.name = "r8a77951_pfc",
-	.ops = &r8a7795_pinmux_ops,
+	.ops = &r8a77951_pinmux_ops,
 	.unlock_reg = 0xe6060000, /* PMMR */
 
 	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
diff --git a/drivers/pinctrl/sh-pfc/sh_pfc.h b/drivers/pinctrl/sh-pfc/sh_pfc.h
index 640d2a4cb838804f..d57e633e99c0ce66 100644
--- a/drivers/pinctrl/sh-pfc/sh_pfc.h
+++ b/drivers/pinctrl/sh-pfc/sh_pfc.h
@@ -318,8 +318,8 @@ extern const struct sh_pfc_soc_info r8a7791_pinmux_info;
 extern const struct sh_pfc_soc_info r8a7792_pinmux_info;
 extern const struct sh_pfc_soc_info r8a7793_pinmux_info;
 extern const struct sh_pfc_soc_info r8a7794_pinmux_info;
-extern const struct sh_pfc_soc_info r8a7795_pinmux_info;
-extern const struct sh_pfc_soc_info r8a7795es1_pinmux_info;
+extern const struct sh_pfc_soc_info r8a77950_pinmux_info __weak;
+extern const struct sh_pfc_soc_info r8a77951_pinmux_info __weak;
 extern const struct sh_pfc_soc_info r8a77960_pinmux_info;
 extern const struct sh_pfc_soc_info r8a77961_pinmux_info;
 extern const struct sh_pfc_soc_info r8a77965_pinmux_info;
-- 
2.17.1


             reply	other threads:[~2019-12-30  8:32 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-30  8:31 Geert Uytterhoeven [this message]
2020-01-07 23:51 ` [PATCH v2] pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers Niklas Söderlund

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191230083156.19191-1-geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=erosca@de.adit-jv.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.