All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wen Gong <wgong@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH v3 1/2] ath10k: add refcount for ath10k_core_restart
Date: Tue, 31 Dec 2019 17:28:05 +0800	[thread overview]
Message-ID: <20191231092806.6247-2-wgong@codeaurora.org> (raw)
In-Reply-To: <20191231092806.6247-1-wgong@codeaurora.org>

When it has more than one restart_work queued meanwhile, the 2nd
restart_work is very esay to break the 1st restart work and lead
recovery fail.

Add a ref count to allow only one restart work running untill
device successfully recovered.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/core.c | 8 ++++++++
 drivers/net/wireless/ath/ath10k/core.h | 2 ++
 drivers/net/wireless/ath/ath10k/mac.c  | 1 +
 3 files changed, 11 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 91f131b87efc..9439e575ec63 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2199,6 +2199,14 @@ static void ath10k_core_restart(struct work_struct *work)
 {
 	struct ath10k *ar = container_of(work, struct ath10k, restart_work);
 	int ret;
+	int restart_count;
+
+	restart_count = atomic_add_return(1, &ar->restart_count);
+	if (restart_count > 1) {
+		ath10k_warn(ar, "can not restart, count: %d\n", restart_count);
+		atomic_dec(&ar->restart_count);
+		return;
+	}
 
 	set_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags);
 
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index e57b2e7235e3..810c99f2dc0e 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -982,6 +982,8 @@ struct ath10k {
 	/* protected by conf_mutex */
 	u8 ps_state_enable;
 
+	atomic_t restart_count;
+
 	bool nlo_enabled;
 	bool p2p;
 
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 3856edba7915..bc1574145e66 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7208,6 +7208,7 @@ static void ath10k_reconfig_complete(struct ieee80211_hw *hw,
 		ath10k_info(ar, "device successfully recovered\n");
 		ar->state = ATH10K_STATE_ON;
 		ieee80211_wake_queues(ar->hw);
+		atomic_dec(&ar->restart_count);
 	}
 
 	mutex_unlock(&ar->conf_mutex);
-- 
2.23.0

WARNING: multiple messages have this Message-ID
From: Wen Gong <wgong@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH v3 1/2] ath10k: add refcount for ath10k_core_restart
Date: Tue, 31 Dec 2019 17:28:05 +0800	[thread overview]
Message-ID: <20191231092806.6247-2-wgong@codeaurora.org> (raw)
In-Reply-To: <20191231092806.6247-1-wgong@codeaurora.org>

When it has more than one restart_work queued meanwhile, the 2nd
restart_work is very esay to break the 1st restart work and lead
recovery fail.

Add a ref count to allow only one restart work running untill
device successfully recovered.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/core.c | 8 ++++++++
 drivers/net/wireless/ath/ath10k/core.h | 2 ++
 drivers/net/wireless/ath/ath10k/mac.c  | 1 +
 3 files changed, 11 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 91f131b87efc..9439e575ec63 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2199,6 +2199,14 @@ static void ath10k_core_restart(struct work_struct *work)
 {
 	struct ath10k *ar = container_of(work, struct ath10k, restart_work);
 	int ret;
+	int restart_count;
+
+	restart_count = atomic_add_return(1, &ar->restart_count);
+	if (restart_count > 1) {
+		ath10k_warn(ar, "can not restart, count: %d\n", restart_count);
+		atomic_dec(&ar->restart_count);
+		return;
+	}
 
 	set_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags);
 
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index e57b2e7235e3..810c99f2dc0e 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -982,6 +982,8 @@ struct ath10k {
 	/* protected by conf_mutex */
 	u8 ps_state_enable;
 
+	atomic_t restart_count;
+
 	bool nlo_enabled;
 	bool p2p;
 
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 3856edba7915..bc1574145e66 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7208,6 +7208,7 @@ static void ath10k_reconfig_complete(struct ieee80211_hw *hw,
 		ath10k_info(ar, "device successfully recovered\n");
 		ar->state = ATH10K_STATE_ON;
 		ieee80211_wake_queues(ar->hw);
+		atomic_dec(&ar->restart_count);
 	}
 
 	mutex_unlock(&ar->conf_mutex);
-- 
2.23.0

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  reply	other threads:[~2019-12-31  9:28 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-31  9:28 [PATCH v3 0/2] start recovery process when payload length overflow for sdio Wen Gong
2019-12-31  9:28 ` Wen Gong
2019-12-31  9:28 ` Wen Gong [this message]
2019-12-31  9:28   ` [PATCH v3 1/2] ath10k: add refcount for ath10k_core_restart Wen Gong
2019-12-31  9:28 ` [PATCH v3 2/2] ath10k: start recovery process when payload length exceeds max htc length for sdio Wen Gong
2019-12-31  9:28   ` Wen Gong
2020-01-08  3:23 ` [PATCH v3 0/2] start recovery process when payload length overflow " Wen Gong
2020-01-08  3:23   ` Wen Gong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191231092806.6247-2-wgong@codeaurora.org \
    --to=wgong@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --subject='Re: [PATCH v3 1/2] ath10k: add refcount for ath10k_core_restart' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.