On Mon, Jan 06, 2020 at 03:56:44PM +0100, Cédric Le Goater wrote:
> From: Greg Kurz <groug@kaod.org>
> 
> And call it from a QEMU reset handler. This allows each PNV child class to
> override the reset hook if needed, eg. POWER8 doesn't but POWER9 does.
> The proper way to do that would be to use device_class_set_parent_reset(),
> but defining a Pnv8PsiClass and a Pnv9PsiClass types with a parent_reset
> pointer adds a fair amount of code. Calling pnv_psi_reset() explicitely is
> fine for now.
> 
> A subsequent patch will consolidate the call to qemu_register_reset() in
> a single place.
> 
> Signed-off-by: Greg Kurz <groug@kaod.org>
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> ---
>  hw/ppc/pnv_psi.c | 17 +++++++++++++----
>  1 file changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/hw/ppc/pnv_psi.c b/hw/ppc/pnv_psi.c
> index 4da3d2568624..cf21e42d93b7 100644
> --- a/hw/ppc/pnv_psi.c
> +++ b/hw/ppc/pnv_psi.c
> @@ -455,7 +455,7 @@ static const MemoryRegionOps pnv_psi_xscom_ops = {
>      }
>  };
>  
> -static void pnv_psi_reset(void *dev)
> +static void pnv_psi_reset(DeviceState *dev)
>  {
>      PnvPsi *psi = PNV_PSI(dev);
>  
> @@ -464,6 +464,13 @@ static void pnv_psi_reset(void *dev)
>      psi->regs[PSIHB_XSCOM_BAR] = psi->bar | PSIHB_BAR_EN;
>  }
>  
> +static void pnv_psi_reset_handler(void *dev)
> +{
> +    DeviceClass *dc = DEVICE_GET_CLASS(dev);
> +
> +    dc->reset(DEVICE(dev));

I think it would be better to use device_reset() here rather than
explicitly accessing the dc->reset pointer yourself.

> +}
> +
>  static void pnv_psi_power8_instance_init(Object *obj)
>  {
>      Pnv8Psi *psi8 = PNV8_PSI(obj);
> @@ -526,7 +533,7 @@ static void pnv_psi_power8_realize(DeviceState *dev, Error **errp)
>              ((uint64_t) i << PSIHB_XIVR_SRC_SH);
>      }
>  
> -    qemu_register_reset(pnv_psi_reset, dev);
> +    qemu_register_reset(pnv_psi_reset_handler, dev);
>  }
>  
>  static int pnv_psi_dt_xscom(PnvXScomInterface *dev, void *fdt, int xscom_offset)
> @@ -809,7 +816,7 @@ static void pnv_psi_power9_irq_set(PnvPsi *psi, int irq, bool state)
>      qemu_set_irq(psi->qirqs[irq], state);
>  }
>  
> -static void pnv_psi_power9_reset(void *dev)
> +static void pnv_psi_power9_reset(DeviceState *dev)
>  {
>      Pnv9Psi *psi = PNV9_PSI(dev);
>  
> @@ -863,7 +870,7 @@ static void pnv_psi_power9_realize(DeviceState *dev, Error **errp)
>  
>      pnv_psi_set_bar(psi, psi->bar | PSIHB_BAR_EN);
>  
> -    qemu_register_reset(pnv_psi_power9_reset, dev);
> +    qemu_register_reset(pnv_psi_reset_handler, dev);
>  }
>  
>  static void pnv_psi_power9_class_init(ObjectClass *klass, void *data)
> @@ -875,6 +882,7 @@ static void pnv_psi_power9_class_init(ObjectClass *klass, void *data)
>  
>      dc->desc    = "PowerNV PSI Controller POWER9";
>      dc->realize = pnv_psi_power9_realize;
> +    dc->reset   = pnv_psi_power9_reset;
>  
>      ppc->xscom_pcba = PNV9_XSCOM_PSIHB_BASE;
>      ppc->xscom_size = PNV9_XSCOM_PSIHB_SIZE;
> @@ -927,6 +935,7 @@ static void pnv_psi_class_init(ObjectClass *klass, void *data)
>  
>      dc->desc = "PowerNV PSI Controller";
>      dc->props = pnv_psi_properties;
> +    dc->reset = pnv_psi_reset;
>  }
>  
>  static const TypeInfo pnv_psi_info = {

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson