All of lore.kernel.org
 help / color / mirror / Atom feed
From: Helmut Grohne <helmut.grohne@intenta.de>
To: Support Opensource <support.opensource@diasemi.com>,
	Lee Jones <lee.jones@linaro.org>
Cc: <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/2] mfd: da9062: enable being a system-power-controller
Date: Tue, 7 Jan 2020 13:06:03 +0100	[thread overview]
Message-ID: <20200107120559.GA700@laureti-dev> (raw)

The DA9062 can be the device used to power the CPU. In that case, it can
be used to power off the system. In the CONTROL_A register, the M_*_EN
bits must be zero for the corresponding *_EN bits to have an effect. We
zero them all to turn off the system.

Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
---
 drivers/mfd/da9062-core.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

This patch includes the functionality into the da9062-core driver. If
that is not the preferred way to integrate it, it can be added as a
mfd_cell instead. In that case, I can move the functionality to a new
drivers/power/reset/da9062-poweroff.c. As far as I can see, doing so
implies that we can no longer use the standard system-power-controller
property though and must use a new compatible property
dlg,da9062-poweroff. Please let me know your preference.

diff --git a/drivers/mfd/da9062-core.c b/drivers/mfd/da9062-core.c
index e69626867c26..a2b5dfee677f 100644
--- a/drivers/mfd/da9062-core.c
+++ b/drivers/mfd/da9062-core.c
@@ -572,6 +572,23 @@ static const struct of_device_id da9062_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, da9062_dt_ids);
 
+/* Hold client since pm_power_off is global. */
+static struct i2c_client *da9062_i2c_client;
+
+static void da9062_power_off(void)
+{
+	struct da9062 *chip = i2c_get_clientdata(da9062_i2c_client);
+	const unsigned int mask = DA9062AA_SYSTEM_EN_MASK |
+		DA9062AA_POWER_EN_MASK | DA9062AA_POWER1_EN_MASK |
+		DA9062AA_M_SYSTEM_EN_MASK | DA9062AA_M_POWER_EN_MASK |
+		DA9062AA_M_POWER1_EN_MASK;
+	int ret = regmap_update_bits(chip->regmap, DA9062AA_CONTROL_A, mask, 0);
+
+	if (ret < 0)
+		dev_err(&da9062_i2c_client->dev,
+			"DA9062AA_CONTROL_A update failed, %d\n", ret);
+}
+
 static int da9062_i2c_probe(struct i2c_client *i2c,
 	const struct i2c_device_id *id)
 {
@@ -661,6 +678,15 @@ static int da9062_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
+	if (of_device_is_system_power_controller(i2c->dev.of_node)) {
+		if (!pm_power_off) {
+			da9062_i2c_client = i2c;
+			pm_power_off = da9062_power_off;
+		} else {
+			dev_warn(&i2c->dev, "Poweroff callback already assigned\n");
+		}
+	}
+
 	return ret;
 }
 
@@ -668,6 +694,11 @@ static int da9062_i2c_remove(struct i2c_client *i2c)
 {
 	struct da9062 *chip = i2c_get_clientdata(i2c);
 
+	if (pm_power_off == da9062_power_off)
+		pm_power_off = NULL;
+	if (da9062_i2c_client)
+		da9062_i2c_client = NULL;
+
 	mfd_remove_devices(chip->dev);
 	regmap_del_irq_chip(i2c->irq, chip->regmap_irq);
 
-- 
2.20.1


             reply	other threads:[~2020-01-07 12:12 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-07 12:06 Helmut Grohne [this message]
2020-01-23 15:51 ` [PATCH 1/2] mfd: da9062: enable being a system-power-controller Adam Thomson
2020-01-24  8:53   ` Helmut Grohne
2020-01-24 10:17     ` Adam Thomson
2020-01-24 11:00       ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200107120559.GA700@laureti-dev \
    --to=helmut.grohne@intenta.de \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=support.opensource@diasemi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.