From mboxrd@z Thu Jan 1 00:00:00 1970 From: Keerthy Date: Fri, 10 Jan 2020 15:53:28 +0530 Subject: [PATCH 05/10] armv7R: K3: Add support for jumping to firmware In-Reply-To: <20200110102333.22767-1-j-keerthy@ti.com> References: <20200110102333.22767-1-j-keerthy@ti.com> Message-ID: <20200110102333.22767-6-j-keerthy@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de MCU Domain rf50 is currently shutting down after loading the ATF. Load elf firmware and jump to firmware post loading ATF. ROM doesn't enable ATCM memory, so make sure that firmware that is being loaded doesn't use ATCM memory or override SPL. Signed-off-by: Keerthy Signed-off-by: Lokesh Vutla --- arch/arm/mach-k3/common.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c index 377fcbe80b..47a1f96ae1 100644 --- a/arch/arm/mach-k3/common.c +++ b/arch/arm/mach-k3/common.c @@ -131,8 +131,10 @@ __weak void start_non_linux_remote_cores(void) void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { + typedef void __noreturn (*image_entry_noargs_t)(void); struct ti_sci_handle *ti_sci = get_ti_sci_handle(); - int ret; + u32 loadaddr = 0; + int ret, size; /* Release all the exclusive devices held by SPL before starting ATF */ ti_sci->ops.dev_ops.release_exclusive_devices(ti_sci); @@ -143,6 +145,9 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) init_env(); start_non_linux_remote_cores(); + size = load_firmware("mcur5f0_0fwname", "mcur5f0_0loadaddr", + &loadaddr); + /* * It is assumed that remoteproc device 1 is the corresponding @@ -158,13 +163,18 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) ret = rproc_start(1); if (ret) panic("%s: ATF failed to start on rproc (%d)\n", __func__, ret); + if (!(size > 0 && valid_elf_image(loadaddr))) { + debug("Shutting down...\n"); + release_resources_for_core_shutdown(); + + while (1) + asm volatile("wfe"); + } - debug("Releasing resources...\n"); - release_resources_for_core_shutdown(); + image_entry_noargs_t image_entry = + (image_entry_noargs_t)load_elf_image_phdr(loadaddr); - debug("Finalizing core shutdown...\n"); - while (1) - asm volatile("wfe"); + image_entry(); } #endif -- 2.17.1