From mboxrd@z Thu Jan  1 00:00:00 1970
From: sbabic at denx.de <sbabic@denx.de>
Date: Wed, 15 Jan 2020 13:46:30 +0100 (CET)
Subject: [PATCH v2 05/21] clk: imx: pllv3: add enable() support
In-Reply-To: <20200110144711.81938-6-giulio.benetti@benettiengineering.com>
Message-ID: <20200115124630.F1300818B3@phobos.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> Before set_rate() pllv3 needs enable() to power the pll up.
> Add enable() taking into account different power_bit and
> different powerup_set, because some pll needs its power_bit to be
> set or reset to be powered on.
> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================