From: Bin Liu <b-liu@ti.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>, Bin Liu <b-liu@ti.com>
Subject: [PATCH 16/25] usb: musb: jz4740: Whitespace and indentation fixes
Date: Wed, 15 Jan 2020 07:25:38 -0600 [thread overview]
Message-ID: <20200115132547.364-17-b-liu@ti.com> (raw)
In-Reply-To: <20200115132547.364-1-b-liu@ti.com>
From: Paul Cercueil <paul@crapouillou.net>
Fix lines with too much or not enough indentation, and lines which were
indented with spaces instead of tabs.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Bin Liu <b-liu@ti.com>
---
drivers/usb/musb/jz4740.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index b4884575e37a..bc0109f4700b 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -23,9 +23,9 @@ struct jz4740_glue {
static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
{
- unsigned long flags;
- irqreturn_t retval = IRQ_NONE;
- struct musb *musb = __hci;
+ unsigned long flags;
+ irqreturn_t retval = IRQ_NONE;
+ struct musb *musb = __hci;
spin_lock_irqsave(&musb->lock, flags);
@@ -39,7 +39,7 @@ static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
* never see them set
*/
musb->int_usb &= MUSB_INTR_SUSPEND | MUSB_INTR_RESUME |
- MUSB_INTR_RESET | MUSB_INTR_SOF;
+ MUSB_INTR_RESET | MUSB_INTR_SOF;
if (musb->int_usb || musb->int_tx || musb->int_rx)
retval = musb_interrupt(musb);
@@ -50,20 +50,20 @@ static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
}
static struct musb_fifo_cfg jz4740_musb_fifo_cfg[] = {
-{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
-{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
-{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, },
+ { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
+ { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
+ { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, },
};
static const struct musb_hdrc_config jz4740_musb_config = {
/* Silicon does not implement USB OTG. */
- .multipoint = 0,
+ .multipoint = 0,
/* Max EPs scanned, driver will decide which EP can be used. */
- .num_eps = 4,
+ .num_eps = 4,
/* RAMbits needed to configure EPs from table */
- .ram_bits = 9,
- .fifo_cfg = jz4740_musb_fifo_cfg,
- .fifo_cfg_size = ARRAY_SIZE(jz4740_musb_fifo_cfg),
+ .ram_bits = 9,
+ .fifo_cfg = jz4740_musb_fifo_cfg,
+ .fifo_cfg_size = ARRAY_SIZE(jz4740_musb_fifo_cfg),
};
static int jz4740_musb_init(struct musb *musb)
@@ -115,7 +115,7 @@ static int jz4740_probe(struct platform_device *pdev)
const struct musb_hdrc_platform_data *pdata = &jz4740_musb_pdata;
struct platform_device *musb;
struct jz4740_glue *glue;
- struct clk *clk;
+ struct clk *clk;
int ret;
glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
@@ -178,7 +178,7 @@ static int jz4740_probe(struct platform_device *pdev)
static int jz4740_remove(struct platform_device *pdev)
{
- struct jz4740_glue *glue = platform_get_drvdata(pdev);
+ struct jz4740_glue *glue = platform_get_drvdata(pdev);
platform_device_unregister(glue->pdev);
clk_disable_unprepare(glue->clk);
--
2.17.1
next prev parent reply other threads:[~2020-01-15 13:25 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-15 13:25 [PATCH 00/25] musb patches for v5.6-rc1 Bin Liu
2020-01-15 13:25 ` [PATCH 01/25] usb: musb: core: Update the function description Bin Liu
2020-01-15 13:25 ` [PATCH 02/25] usb: musb: sunxi: propagate devicetree node to glue pdev Bin Liu
2020-01-15 13:25 ` [PATCH 03/25] usb: musb: jz4740: Drop dependency on NOP_USB_XCEIV Bin Liu
2020-01-15 13:25 ` [PATCH 04/25] usb: musb: omap2430: Get rid of musb .set_vbus for omap2430 glue Bin Liu
2020-01-15 13:25 ` [PATCH 05/25] usb: musb: omap2430: Wait on enable to avoid babble Bin Liu
2020-01-15 13:25 ` [PATCH 06/25] usb: musb: omap2430: Handle multiple ID ground interrupts Bin Liu
2020-01-15 13:25 ` [PATCH 07/25] usb: musb: Add musb_set_host and peripheral and use them for omap2430 Bin Liu
2020-01-15 13:25 ` [PATCH 08/25] usb: musb: omap2430: Clean up enable and remove devctl tinkering Bin Liu
2020-01-15 13:25 ` [PATCH 09/25] usb: musb: omap2430: Idle musb on init Bin Liu
2020-01-15 13:25 ` [PATCH 10/25] usb: musb: Get rid of omap2430_musb_set_vbus() Bin Liu
2020-01-15 13:25 ` [PATCH 11/25] usb: musb: jz4740: Suppress useless field in priv structure Bin Liu
2020-01-15 13:25 ` [PATCH 12/25] usb: musb: jz4740: Add local dev variable to clean up probe Bin Liu
2020-01-15 13:25 ` [PATCH 13/25] usb: musb: jz4740: Constify jz4740_musb_pdata struct Bin Liu
2020-01-15 13:25 ` [PATCH 14/25] usb: musb: jz4740: Rename platform_device field in priv struct Bin Liu
2020-01-15 13:25 ` [PATCH 15/25] usb: musb: jz4740: Comments fix Bin Liu
2020-01-15 13:25 ` Bin Liu [this message]
2020-01-15 13:25 ` [PATCH 17/25] USB: musb: fix __iomem in trace functions Bin Liu
2020-01-15 13:25 ` [PATCH 18/25] usb: musb/ux500: Use dma_request_chan() instead dma_request_slave_channel() Bin Liu
2020-01-15 13:25 ` [PATCH 19/25] dt-bindings: usb: musb: Add support for MediaTek musb controller Bin Liu
2020-01-15 13:25 ` [PATCH 20/25] usb: musb: Add get/set toggle hooks Bin Liu
2020-01-15 13:25 ` [PATCH 21/25] usb: musb: Add noirq type of dma create interface Bin Liu
2020-01-15 13:25 ` [PATCH 22/25] usb: musb: Add musb_clearb/w() interface Bin Liu
2020-01-15 13:25 ` [PATCH 23/25] usb: musb: Add support for MediaTek musb controller Bin Liu
2020-01-15 13:25 ` [PATCH 24/25] usb: musb: davinci: Convert to use GPIO descriptor Bin Liu
2020-01-15 13:25 ` [PATCH 25/25] usb: musb: remove dummy driver musb_am335x.c Bin Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200115132547.364-17-b-liu@ti.com \
--to=b-liu@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.