[PATCH 2/3] color.c: Support bright aixterm colors

[Eyal Soha <shawarmakarma@gmail.com>]

These colors are the bright variants of the 3-bit colors.

Signed-off-by: Eyal Soha <shawarmakarma@gmail.com>
---
 Documentation/config.txt |  4 +++-
 color.c                  | 34 +++++++++++++++++++++++++++-------
 t/t4026-color.sh         |  8 ++++++++
 3 files changed, 38 insertions(+), 8 deletions(-)

diff --git a/Documentation/config.txt b/Documentation/config.txt
index 83e7bba872..08b13ba72b 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -263,7 +263,9 @@ color::
 +
 The basic colors accepted are `normal`, `black`, `red`, `green`, `yellow`,
 `blue`, `magenta`, `cyan` and `white`.  The first color given is the
-foreground; the second is the background.
+foreground; the second is the background.  All the basic colors except
+`normal` have a bright variant that can be speficied by prefixing the
+color with `bright`, like `brightred`.
 +
 Colors may also be given as numbers between 0 and 255; these use ANSI
 256-color mode (but note that not all terminals may support this).  If
diff --git a/color.c b/color.c
index 3b734ccffd..66d32e1191 100644
--- a/color.c
+++ b/color.c
@@ -29,6 +29,7 @@ enum {
 	COLOR_FOREGROUND_ANSI = 30,
 	COLOR_FOREGROUND_RGB = 38,
 	COLOR_FOREGROUND_256 = 38,
+	COLOR_FOREGROUND_BRIGHT_ANSI = 90,
 };
 
 /* Ignore the RESET at the end when giving the size */
@@ -68,13 +69,36 @@ static int get_hex_color(const char *in, unsigned char *out)
 	return 0;
 }
 
-static int parse_color(struct color *out, const char *name, int len)
+/*
+ * If an ANSI color is recognized in "name", fill "out" and return 0.
+ * Otherwise, leave out unchanged and return -1.
+ */
+static int parse_ansi_color(struct color *out, const char *name, int len)
 {
 	/* Positions in array must match ANSI color codes */
 	static const char * const color_names[] = {
 		"black", "red", "green", "yellow",
 		"blue", "magenta", "cyan", "white"
 	};
+
+	int color_offset = COLOR_FOREGROUND_ANSI;
+	if (strncasecmp(name, "bright", 6) == 0) {
+		color_offset = COLOR_FOREGROUND_BRIGHT_ANSI;
+		name += 6;
+		len -= 6;
+	}
+	for (int i = 0; i < ARRAY_SIZE(color_names); i++) {
+		if (match_word(name, len, color_names[i])) {
+			out->type = COLOR_ANSI;
+			out->value = i + color_offset;
+			return 0;
+		}
+	}
+	return -1;
+}
+
+static int parse_color(struct color *out, const char *name, int len)
+{
 	char *end;
 	int i;
 	long val;
@@ -96,12 +120,8 @@ static int parse_color(struct color *out, const char *name, int len)
 	}
 
 	/* Then pick from our human-readable color names... */
-	for (i = 0; i < ARRAY_SIZE(color_names); i++) {
-		if (match_word(name, len, color_names[i])) {
-			out->type = COLOR_ANSI;
-			out->value = i + COLOR_FOREGROUND_ANSI;
-			return 0;
-		}
+	if (parse_ansi_color(out, name, len) == 0) {
+		return 0;
 	}
 
 	/* And finally try a literal 256-color-mode number */
diff --git a/t/t4026-color.sh b/t/t4026-color.sh
index 671e951ee5..78c69de90a 100755
--- a/t/t4026-color.sh
+++ b/t/t4026-color.sh
@@ -30,6 +30,14 @@ test_expect_success 'attribute before color name' '
 	color "bold red" "[1;31m"
 '
 
+test_expect_success 'aixterm bright fg color' '
+	color "brightred" "[91m"
+'
+
+test_expect_success 'aixterm bright bg color' '
+	color "green brightblue" "[32;104m"
+'
+
 test_expect_success 'color name before attribute' '
 	color "red bold" "[1;31m"
 '
-- 
2.25.0.rc2.3.g8712c6e7f0