All of lore.kernel.org
 help / color / mirror / Atom feed
From: Boqun Feng <boqun.feng@gmail.com>
To: linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Michael Kelley <mikelley@microsoft.com>,
	Boqun Feng <boqun.feng@gmail.com>,
	"K. Y. Srinivasan" <kys@microsoft.com>,
	Haiyang Zhang <haiyangz@microsoft.com>,
	Stephen Hemminger <sthemmin@microsoft.com>,
	Sasha Levin <sashal@kernel.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	x86@kernel.org (maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)),
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Andrew Murray <andrew.murray@arm.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	linux-pci@vger.kernel.org (open list:PCI NATIVE HOST BRIDGE AND
	ENDPOINT DRIVERS)
Subject: [PATCH 2/2] pci: hyperv: Move retarget related struct definitions into tlfs
Date: Tue, 21 Jan 2020 09:57:13 +0800	[thread overview]
Message-ID: <20200121015713.69691-2-boqun.feng@gmail.com> (raw)
In-Reply-To: <20200121015713.69691-1-boqun.feng@gmail.com>

For future support of virtual PCI on non-x86 architecture.

Signed-off-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com>
---
 arch/x86/include/asm/hyperv-tlfs.h  | 38 +++++++++++++++++++++++++++++
 arch/x86/include/asm/mshyperv.h     |  8 ++++++
 drivers/pci/controller/pci-hyperv.c | 38 +++--------------------------
 3 files changed, 50 insertions(+), 34 deletions(-)

diff --git a/arch/x86/include/asm/hyperv-tlfs.h b/arch/x86/include/asm/hyperv-tlfs.h
index b9ebc20b2385..debe017ae748 100644
--- a/arch/x86/include/asm/hyperv-tlfs.h
+++ b/arch/x86/include/asm/hyperv-tlfs.h
@@ -912,4 +912,42 @@ struct hv_tlb_flush_ex {
 struct hv_partition_assist_pg {
 	u32 tlb_lock_count;
 };
+
+union hv_msi_entry {
+	u64 as_uint64;
+	struct {
+		u32 address;
+		u32 data;
+	} __packed;
+};
+
+struct hv_interrupt_entry {
+	u32 source;			/* 1 for MSI(-X) */
+	u32 reserved1;
+	union hv_msi_entry msi_entry;
+} __packed;
+
+/*
+ * flags for hv_device_interrupt_target.flags
+ */
+#define HV_DEVICE_INTERRUPT_TARGET_MULTICAST		1
+#define HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET	2
+
+struct hv_device_interrupt_target {
+	u32 vector;
+	u32 flags;
+	union {
+		u64 vp_mask;
+		struct hv_vpset vp_set;
+	};
+} __packed;
+
+/* HvRetargetDeviceInterrupt hypercall */
+struct hv_retarget_device_interrupt {
+	u64 partition_id;
+	u64 device_id;
+	struct hv_interrupt_entry int_entry;
+	u64 reserved2;
+	struct hv_device_interrupt_target int_target;
+} __packed __aligned(8);
 #endif
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 6b79515abb82..d13319d82f6b 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -240,6 +240,14 @@ bool hv_vcpu_is_preempted(int vcpu);
 static inline void hv_apic_init(void) {}
 #endif
 
+#if IS_ENABLED(CONFIG_PCI_HYPERV)
+#define hv_set_msi_address_from_desc(msi_entry, msi_desc)	\
+do {								\
+	(msi_entry)->address = (msi_desc)->msg.address_lo;	\
+} while (0)
+
+#endif /* CONFIG_PCI_HYPERV */
+
 #else /* CONFIG_HYPERV */
 static inline void hyperv_init(void) {}
 static inline void hyperv_setup_mmu_ops(void) {}
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index aacfcc90d929..2240f2b3643e 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -406,36 +406,6 @@ struct pci_eject_response {
 
 static int pci_ring_size = (4 * PAGE_SIZE);
 
-struct hv_interrupt_entry {
-	u32	source;			/* 1 for MSI(-X) */
-	u32	reserved1;
-	u32	address;
-	u32	data;
-};
-
-/*
- * flags for hv_device_interrupt_target.flags
- */
-#define HV_DEVICE_INTERRUPT_TARGET_MULTICAST		1
-#define HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET	2
-
-struct hv_device_interrupt_target {
-	u32	vector;
-	u32	flags;
-	union {
-		u64		 vp_mask;
-		struct hv_vpset vp_set;
-	};
-};
-
-struct retarget_msi_interrupt {
-	u64	partition_id;		/* use "self" */
-	u64	device_id;
-	struct hv_interrupt_entry int_entry;
-	u64	reserved2;
-	struct hv_device_interrupt_target int_target;
-} __packed __aligned(8);
-
 /*
  * Driver specific state.
  */
@@ -482,7 +452,7 @@ struct hv_pcibus_device {
 	struct workqueue_struct *wq;
 
 	/* hypercall arg, must not cross page boundary */
-	struct retarget_msi_interrupt retarget_msi_interrupt_params;
+	struct hv_retarget_device_interrupt retarget_msi_interrupt_params;
 
 	/*
 	 * Don't put anything here: retarget_msi_interrupt_params must be last
@@ -1178,7 +1148,7 @@ static void hv_irq_unmask(struct irq_data *data)
 {
 	struct msi_desc *msi_desc = irq_data_get_msi_desc(data);
 	struct irq_cfg *cfg = irqd_cfg(data);
-	struct retarget_msi_interrupt *params;
+	struct hv_retarget_device_interrupt *params;
 	struct hv_pcibus_device *hbus;
 	struct cpumask *dest;
 	cpumask_var_t tmp;
@@ -1200,8 +1170,8 @@ static void hv_irq_unmask(struct irq_data *data)
 	memset(params, 0, sizeof(*params));
 	params->partition_id = HV_PARTITION_ID_SELF;
 	params->int_entry.source = 1; /* MSI(-X) */
-	params->int_entry.address = msi_desc->msg.address_lo;
-	params->int_entry.data = msi_desc->msg.data;
+	hv_set_msi_address_from_desc(&params->int_entry.msi_entry, msi_desc);
+	params->int_entry.msi_entry.data = msi_desc->msg.data;
 	params->device_id = (hbus->hdev->dev_instance.b[5] << 24) |
 			   (hbus->hdev->dev_instance.b[4] << 16) |
 			   (hbus->hdev->dev_instance.b[7] << 8) |
-- 
2.24.1


  reply	other threads:[~2020-01-21  1:57 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-21  1:57 [PATCH 1/2] pci: hyperv: x86: Move hypercall related definitions into tlfs header Boqun Feng
2020-01-21  1:57 ` Boqun Feng [this message]
2020-01-21  9:25   ` [PATCH 2/2] pci: hyperv: Move retarget related struct definitions into tlfs Vitaly Kuznetsov
2020-01-23 10:40     ` Boqun Feng
2020-01-21 14:37   ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200121015713.69691-2-boqun.feng@gmail.com \
    --to=boqun.feng@gmail.com \
    --cc=andrew.murray@arm.com \
    --cc=bhelgaas@google.com \
    --cc=bp@alien8.de \
    --cc=haiyangz@microsoft.com \
    --cc=hpa@zytor.com \
    --cc=kys@microsoft.com \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mikelley@microsoft.com \
    --cc=mingo@redhat.com \
    --cc=sashal@kernel.org \
    --cc=sthemmin@microsoft.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.