All of lore.kernel.org
 help / color / mirror / Atom feed
From: Saeed Mahameed <saeedm@mellanox.com>
To: "David S. Miller" <davem@davemloft.net>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	Aya Levin <ayal@mellanox.com>,
	Eran Ben Elisha <eranbe@mellanox.com>,
	Saeed Mahameed <saeedm@mellanox.com>
Subject: [net-next V2 09/14] net/mlx5e: Advertise globaly supported FEC modes
Date: Sat, 25 Jan 2020 05:11:42 +0000	[thread overview]
Message-ID: <20200125051039.59165-10-saeedm@mellanox.com> (raw)
In-Reply-To: <20200125051039.59165-1-saeedm@mellanox.com>

From: Aya Levin <ayal@mellanox.com>

Ethtool advertise supported link modes on an interface. Per each FEC
mode, query if there is a link type which supports it. If so, add this
FEC mode to the supported FEC modes list. Prior to this patch, ethtool
advertised only the supported FEC modes on the current link type.
Add an explicit mapping between internal FEC modes and ethtool link mode
bits. With this change, adding new FEC modes in the downstream patch
would be easier.

Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 .../net/ethernet/mellanox/mlx5/core/en/port.c | 17 +++---
 .../net/ethernet/mellanox/mlx5/core/en/port.h |  2 +-
 .../ethernet/mellanox/mlx5/core/en_ethtool.c  | 55 +++++++++----------
 3 files changed, 38 insertions(+), 36 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c
index f0dc0ca3ddc4..26c7849eeb7c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c
@@ -441,13 +441,13 @@ static int mlx5e_get_fec_cap_field(u32 *pplm,
 	return 0;
 }
 
-int mlx5e_get_fec_caps(struct mlx5_core_dev *dev, u8 *fec_caps)
+bool mlx5e_fec_in_caps(struct mlx5_core_dev *dev, int fec_policy)
 {
 	u32 out[MLX5_ST_SZ_DW(pplm_reg)] = {};
 	u32 in[MLX5_ST_SZ_DW(pplm_reg)] = {};
 	int sz = MLX5_ST_SZ_BYTES(pplm_reg);
-	u32 current_fec_speed;
 	int err;
+	int i;
 
 	if (!MLX5_CAP_GEN(dev, pcam_reg))
 		return -EOPNOTSUPP;
@@ -458,13 +458,16 @@ int mlx5e_get_fec_caps(struct mlx5_core_dev *dev, u8 *fec_caps)
 	MLX5_SET(pplm_reg, in, local_port, 1);
 	err =  mlx5_core_access_reg(dev, in, sz, out, sz, MLX5_REG_PPLM, 0, 0);
 	if (err)
-		return err;
+		return false;
 
-	err = mlx5e_port_linkspeed(dev, &current_fec_speed);
-	if (err)
-		return err;
+	for (i = 0; i < MLX5E_FEC_SUPPORTED_SPEEDS; i++) {
+		u8 fec_caps;
 
-	return mlx5e_get_fec_cap_field(out, fec_caps, current_fec_speed);
+		mlx5e_get_fec_cap_field(out, &fec_caps, fec_supported_speeds[i]);
+		if (fec_caps & fec_policy)
+			return true;
+	}
+	return false;
 }
 
 int mlx5e_get_fec_mode(struct mlx5_core_dev *dev, u32 *fec_mode_active,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port.h b/drivers/net/ethernet/mellanox/mlx5/core/en/port.h
index 4a7f4497692b..025d86577567 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.h
@@ -60,7 +60,7 @@ int mlx5e_port_set_pbmc(struct mlx5_core_dev *mdev, void *in);
 int mlx5e_port_query_priority2buffer(struct mlx5_core_dev *mdev, u8 *buffer);
 int mlx5e_port_set_priority2buffer(struct mlx5_core_dev *mdev, u8 *buffer);
 
-int mlx5e_get_fec_caps(struct mlx5_core_dev *dev, u8 *fec_caps);
+bool mlx5e_fec_in_caps(struct mlx5_core_dev *dev, int fec_policy);
 int mlx5e_get_fec_mode(struct mlx5_core_dev *dev, u32 *fec_mode_active,
 		       u8 *fec_configured_mode);
 int mlx5e_set_fec_mode(struct mlx5_core_dev *dev, u8 fec_policy);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index d1664ff1772b..6624e0a82cd9 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -650,45 +650,44 @@ static u32 pplm2ethtool_fec(u_long fec_mode, unsigned long size)
 	return 0;
 }
 
-/* we use ETHTOOL_FEC_* offset and apply it to ETHTOOL_LINK_MODE_FEC_*_BIT */
-static u32 ethtool_fec2ethtool_caps(u_long ethtool_fec_code)
-{
-	u32 offset;
-
-	offset = find_first_bit(&ethtool_fec_code, sizeof(u32));
-	offset -= ETHTOOL_FEC_OFF_BIT;
-	offset += ETHTOOL_LINK_MODE_FEC_NONE_BIT;
-
-	return offset;
-}
+#define MLX5E_ADVERTISE_SUPPORTED_FEC(mlx5_fec, ethtool_fec)		\
+	do {								\
+		if (mlx5e_fec_in_caps(dev, 1 << (mlx5_fec)))		\
+			__set_bit(ethtool_fec,				\
+				  link_ksettings->link_modes.supported);\
+	} while (0)
+
+static const u32 pplm_fec_2_ethtool_linkmodes[] = {
+	[MLX5E_FEC_NOFEC] = ETHTOOL_LINK_MODE_FEC_NONE_BIT,
+	[MLX5E_FEC_FIRECODE] = ETHTOOL_LINK_MODE_FEC_BASER_BIT,
+	[MLX5E_FEC_RS_528_514] = ETHTOOL_LINK_MODE_FEC_RS_BIT,
+};
 
 static int get_fec_supported_advertised(struct mlx5_core_dev *dev,
 					struct ethtool_link_ksettings *link_ksettings)
 {
-	u_long fec_caps = 0;
-	u32 active_fec = 0;
-	u32 offset;
+	u_long active_fec = 0;
 	u32 bitn;
 	int err;
 
-	err = mlx5e_get_fec_caps(dev, (u8 *)&fec_caps);
+	err = mlx5e_get_fec_mode(dev, (u32 *)&active_fec, NULL);
 	if (err)
 		return (err == -EOPNOTSUPP) ? 0 : err;
 
-	err = mlx5e_get_fec_mode(dev, &active_fec, NULL);
-	if (err)
-		return err;
-
-	for_each_set_bit(bitn, &fec_caps, ARRAY_SIZE(pplm_fec_2_ethtool)) {
-		u_long ethtool_bitmask = pplm_fec_2_ethtool[bitn];
+	MLX5E_ADVERTISE_SUPPORTED_FEC(MLX5E_FEC_NOFEC,
+				      ETHTOOL_LINK_MODE_FEC_NONE_BIT);
+	MLX5E_ADVERTISE_SUPPORTED_FEC(MLX5E_FEC_FIRECODE,
+				      ETHTOOL_LINK_MODE_FEC_BASER_BIT);
+	MLX5E_ADVERTISE_SUPPORTED_FEC(MLX5E_FEC_RS_528_514,
+				      ETHTOOL_LINK_MODE_FEC_RS_BIT);
 
-		offset = ethtool_fec2ethtool_caps(ethtool_bitmask);
-		__set_bit(offset, link_ksettings->link_modes.supported);
-	}
-
-	active_fec = pplm2ethtool_fec(active_fec, sizeof(u32) * BITS_PER_BYTE);
-	offset = ethtool_fec2ethtool_caps(active_fec);
-	__set_bit(offset, link_ksettings->link_modes.advertising);
+	/* active fec is a bit set, find out which bit is set and
+	 * advertise the corresponding ethtool bit
+	 */
+	bitn = find_first_bit(&active_fec, sizeof(u32) * BITS_PER_BYTE);
+	if (bitn < ARRAY_SIZE(pplm_fec_2_ethtool_linkmodes))
+		__set_bit(pplm_fec_2_ethtool_linkmodes[bitn],
+			  link_ksettings->link_modes.advertising);
 
 	return 0;
 }
-- 
2.24.1


  parent reply	other threads:[~2020-01-25  5:11 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-25  5:10 [pull request][net-next V2 00/14] Mellanox, mlx5 updates 2020-01-24 Saeed Mahameed
2020-01-25  5:11 ` [net-next V2 01/14] devlink: Force enclosing array on binary fmsg data Saeed Mahameed
2020-01-25  5:11 ` [net-next V2 02/14] net/mlx5: Add support for resource dump Saeed Mahameed
2020-01-25  5:11 ` [net-next V2 03/14] net/mlx5e: Gather reporters APIs together Saeed Mahameed
2020-01-25  5:11 ` [net-next V2 04/14] net/mlx5e: Support dump callback in TX reporter Saeed Mahameed
2020-01-25  5:11 ` [net-next V2 05/14] net/mlx5e: Support dump callback in RX reporter Saeed Mahameed
2020-01-25  5:11 ` [net-next V2 06/14] mlx5: Use proper logging and tracing line terminations Saeed Mahameed
2020-01-25  5:11 ` [net-next V2 07/14] net/mlx5e: Set FEC to auto when configured mode is not supported Saeed Mahameed
2020-01-25  5:11 ` [net-next V2 08/14] net/mlx5e: Enforce setting of a single FEC mode Saeed Mahameed
2020-01-25  5:11 ` Saeed Mahameed [this message]
2020-01-25  5:11 ` [net-next V2 10/14] net/mlxe5: Separate between FEC and current speed Saeed Mahameed
2020-01-25  5:11 ` [net-next V2 11/14] ethtool: Add support for low latency RS FEC Saeed Mahameed
2020-01-25 19:40   ` Jakub Kicinski
2020-01-25 21:05     ` Andrew Lunn
2020-01-26  9:13       ` Aya Levin
2020-01-26 17:22         ` Andrew Lunn
2020-01-27 21:56       ` Saeed Mahameed
2020-01-25  5:11 ` [net-next V2 12/14] net/mlx5e: Add support for FEC modes based on 50G per lane links Saeed Mahameed
2020-01-25  5:11 ` [net-next V2 13/14] net/mlx5: DR, Handle reformat capability over sw-steering tables Saeed Mahameed
2020-01-25  5:12 ` [net-next V2 14/14] net/mlx5: Fix lowest FDB pool size Saeed Mahameed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200125051039.59165-10-saeedm@mellanox.com \
    --to=saeedm@mellanox.com \
    --cc=ayal@mellanox.com \
    --cc=davem@davemloft.net \
    --cc=eranbe@mellanox.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.