All of lore.kernel.org
 help / color / mirror / Atom feed
From: Borislav Petkov <bp@alien8.de>
To: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
	x86@kernel.org, linux-edac@vger.kernel.org,
	Saar Amar <Saar.Amar@microsoft.com>,
	"security@kernel.org" <security@kernel.org>
Subject: Re: [PATCH] x86/MCE/AMD: Fix use after free in error handling
Date: Tue, 4 Feb 2020 14:36:38 +0100	[thread overview]
Message-ID: <20200204133638.GA19863@zn.tnic> (raw)
In-Reply-To: <20200128140846.phctkvx5btiexvbx@kili.mountain>

On Tue, Jan 28, 2020 at 05:09:52PM +0300, Dan Carpenter wrote:
> If an error occurs in the threshold_create_bank() function then the real
> clean up is supposed to happen in mce_threshold_remove_device().  The
> problem here is that if allocate_threshold_blocks() fails, then we
> kfree(b) before returning.  Then we use "b" again in
> mce_threshold_remove_device() when we do the rest of the clean up work.
> 
> Fixes: 019f34fccfd5 ("x86, MCE, AMD: Move shared bank to node descriptor")
> Reported-by: Saar Amar <Saar.Amar@microsoft.com>
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> ---
> I believe Saar found this through reading the code and there is no test
> case.  I have don't have a way to test it.
> 
>  arch/x86/kernel/cpu/mce/amd.c | 9 ++-------
>  1 file changed, 2 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
> index b3a50d962851..ff01b789066e 100644
> --- a/arch/x86/kernel/cpu/mce/amd.c
> +++ b/arch/x86/kernel/cpu/mce/amd.c
> @@ -1342,7 +1342,8 @@ static int threshold_create_bank(unsigned int cpu, unsigned int bank)
>  	b->kobj = kobject_create_and_add(name, &dev->kobj);
>  	if (!b->kobj) {
>  		err = -EINVAL;
> -		goto out_free;
> +		kfree(b);
> +		goto out;
>  	}
>  
>  	per_cpu(threshold_banks, cpu)[bank] = b;
> @@ -1358,12 +1359,6 @@ static int threshold_create_bank(unsigned int cpu, unsigned int bank)
>  	}
>  
>  	err = allocate_threshold_blocks(cpu, bank, 0, msr_ops.misc(bank));
> -	if (!err)
> -		goto out;
> -
> - out_free:
> -	kfree(b);
> -
>   out:
>  	return err;
>  }
> -- 

Thanks for the report.

However, I think a better fix would be to publish the "b" pointer only
after allocate_threshold_blocks() succeeds so that any callers would be
sure to access only a valid pointer.

The diffstat is a bit bigger but it makes allocate_threshold_blocks() a
lot more readable, in addition, and that is very important particularly
with that rather convoluted, hard to parse and recursive function.

Thx.

---
diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index b3a50d962851..e7313e5c497c 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -1198,8 +1198,9 @@ static const char *get_name(unsigned int bank, struct threshold_block *b)
 	return buf_mcatype;
 }
 
-static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank,
-				     unsigned int block, u32 address)
+static int allocate_threshold_blocks(unsigned int cpu, struct threshold_bank *tb,
+				     unsigned int bank, unsigned int block,
+				     u32 address)
 {
 	struct threshold_block *b = NULL;
 	u32 low, high;
@@ -1243,16 +1244,12 @@ static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank,
 
 	INIT_LIST_HEAD(&b->miscj);
 
-	if (per_cpu(threshold_banks, cpu)[bank]->blocks) {
-		list_add(&b->miscj,
-			 &per_cpu(threshold_banks, cpu)[bank]->blocks->miscj);
-	} else {
-		per_cpu(threshold_banks, cpu)[bank]->blocks = b;
-	}
+	if (tb->blocks)
+		list_add(&b->miscj, &tb->blocks->miscj);
+	else
+		tb->blocks = b;
 
-	err = kobject_init_and_add(&b->kobj, &threshold_ktype,
-				   per_cpu(threshold_banks, cpu)[bank]->kobj,
-				   get_name(bank, b));
+	err = kobject_init_and_add(&b->kobj, &threshold_ktype, tb->kobj, get_name(bank, b));
 	if (err)
 		goto out_free;
 recurse:
@@ -1260,7 +1257,7 @@ static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank,
 	if (!address)
 		return 0;
 
-	err = allocate_threshold_blocks(cpu, bank, block, address);
+	err = allocate_threshold_blocks(cpu, tb, bank, block, address);
 	if (err)
 		goto out_free;
 
@@ -1345,8 +1342,6 @@ static int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		goto out_free;
 	}
 
-	per_cpu(threshold_banks, cpu)[bank] = b;
-
 	if (is_shared_bank(bank)) {
 		refcount_set(&b->cpus, 1);
 
@@ -1357,9 +1352,13 @@ static int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		}
 	}
 
-	err = allocate_threshold_blocks(cpu, bank, 0, msr_ops.misc(bank));
-	if (!err)
-		goto out;
+	err = allocate_threshold_blocks(cpu, b, bank, 0, msr_ops.misc(bank));
+	if (err)
+		goto out_free;
+
+	per_cpu(threshold_banks, cpu)[bank] = b;
+
+	return 0;
 
  out_free:
 	kfree(b);

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette

  parent reply	other threads:[~2020-02-04 13:36 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190813100752.GM1935@kadam>
2020-01-28 14:09 ` [PATCH] x86/MCE/AMD: Fix use after free in error handling Dan Carpenter
2020-01-28 14:12   ` [EXTERNAL] " Saar Amar
2020-01-28 15:59   ` Saar Amar
2020-01-28 16:15     ` Dan Carpenter
2020-02-04 13:36   ` Borislav Petkov [this message]
2020-02-14  8:37     ` [PATCH] x86/mce/amd: Publish the bank pointer only after setup has succeeded Borislav Petkov
2020-02-15 13:35   ` [tip: ras/urgent] " tip-bot2 for Borislav Petkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200204133638.GA19863@zn.tnic \
    --to=bp@alien8.de \
    --cc=Saar.Amar@microsoft.com \
    --cc=dan.carpenter@oracle.com \
    --cc=hpa@zytor.com \
    --cc=linux-edac@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=security@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=tony.luck@intel.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.