From: Max Reitz <mreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Peter Maydell <peter.maydell@linaro.org>,
qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>
Subject: [PULL 10/17] iotests: Enable more tests in the 'auto' group to improve test coverage
Date: Thu, 6 Feb 2020 13:51:25 +0100 [thread overview]
Message-ID: <20200206125132.594625-11-mreitz@redhat.com> (raw)
In-Reply-To: <20200206125132.594625-1-mreitz@redhat.com>
From: Thomas Huth <thuth@redhat.com>
According to Kevin, tests 030, 040 and 041 are among the most valuable
tests that we have, so we should always run them if possible, even if
they take a little bit longer.
According to Max, it would be good to have a test for iothreads and
migration. 127 and 256 seem to be good candidates for iothreads. For
migration, let's enable 181 and 203 (which also tests iothreads).
(091 would be a good candidate for migration, too, but Alex Bennée
reported that this test fails on ZFS file systems, so it can't be
included yet)
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-7-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/group | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
index e041cc1ee3..9d30a4b6c4 100644
--- a/tests/qemu-iotests/group
+++ b/tests/qemu-iotests/group
@@ -51,7 +51,7 @@
027 rw auto quick
028 rw backing quick
029 rw auto quick
-030 rw backing
+030 rw auto backing
031 rw auto quick
032 rw auto quick
033 rw auto quick
@@ -61,8 +61,8 @@
037 rw auto backing quick
038 rw auto backing quick
039 rw auto quick
-040 rw
-041 rw backing
+040 rw auto
+041 rw auto backing
042 rw auto quick
043 rw auto backing
044 rw
@@ -148,7 +148,7 @@
124 rw backing
125 rw
126 rw auto backing
-127 rw backing quick
+127 rw auto backing quick
128 rw quick
129 rw quick
130 rw quick
@@ -197,7 +197,7 @@
177 rw auto quick
178 img
179 rw auto quick
-181 rw migration
+181 rw auto migration
182 rw quick
183 rw migration
184 rw auto quick
@@ -218,7 +218,7 @@
200 rw
201 rw migration
202 rw quick
-203 rw migration
+203 rw auto migration
204 rw quick
205 rw quick
206 rw
@@ -270,7 +270,7 @@
253 rw quick
254 rw backing quick
255 rw quick
-256 rw quick
+256 rw auto quick
257 rw
258 rw quick
260 rw quick
--
2.24.1
next prev parent reply other threads:[~2020-02-06 13:06 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-06 12:51 [PULL 00/17] Block patches Max Reitz
2020-02-06 12:51 ` [PULL 01/17] qcow2: Assert that host cluster offsets fit in L2 table entries Max Reitz
2020-02-06 12:51 ` [PULL 02/17] block: Use a GString in bdrv_perm_names() Max Reitz
2020-02-06 12:51 ` [PULL 03/17] block: fix memleaks in bdrv_refresh_filename Max Reitz
2020-02-06 12:51 ` [PULL 04/17] qcow2: Use a GString in report_unsupported_feature() Max Reitz
2020-02-06 12:51 ` [PULL 05/17] iotests: remove 'linux' from default supported platforms Max Reitz
2020-02-06 12:51 ` [PULL 06/17] iotests: Test 041 only works on certain systems Max Reitz
2020-02-06 12:51 ` [PULL 07/17] iotests: Test 183 does not work on macOS and OpenBSD Max Reitz
2020-02-06 12:51 ` [PULL 08/17] iotests: Check for the availability of the required devices in 267 and 127 Max Reitz
2020-02-06 12:51 ` [PULL 09/17] iotests: Skip Python-based tests if QEMU does not support virtio-blk Max Reitz
2020-02-06 12:51 ` Max Reitz [this message]
2020-02-06 12:51 ` [PULL 11/17] qcow2: Don't round the L1 table allocation up to the sector size Max Reitz
2020-02-06 12:51 ` [PULL 12/17] qcow2: Tighten cluster_offset alignment assertions Max Reitz
2020-02-06 12:51 ` [PULL 13/17] qcow2: Use bs->bl.request_alignment when updating an L1 entry Max Reitz
2020-02-06 12:51 ` [PULL 14/17] qcow2: Don't require aligned offsets in qcow2_co_copy_range_from() Max Reitz
2020-02-06 12:51 ` [PULL 15/17] qcow2: Use BDRV_SECTOR_SIZE instead of the hardcoded value Max Reitz
2020-02-06 12:51 ` [PULL 16/17] block/backup-top: fix failure path Max Reitz
2020-02-06 12:51 ` [PULL 17/17] iotests: add test for backup-top failure on permission activation Max Reitz
2020-02-06 18:58 ` [PULL 00/17] Block patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200206125132.594625-11-mreitz@redhat.com \
--to=mreitz@redhat.com \
--cc=kwolf@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.