* [Buildroot] [PATCH v5 1/9] package/nxp: new package directory
@ 2020-02-07 8:38 Changming Huang
2020-02-07 8:38 ` [Buildroot] [PATCH v5 2/9] package/qoriq-rcw: move rcw into nxp and rename it Changming Huang
` (8 more replies)
0 siblings, 9 replies; 20+ messages in thread
From: Changming Huang @ 2020-02-07 8:38 UTC (permalink / raw)
To: buildroot
The "nxp" directory is intended to contain all NXP
QorIQ (including PowerPC and LayerScape serial) related packages,
together with their download site and version info.
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
---
changes since v4:
no changes.
changes since v3:
no changes.
changes since v2:
1. change the sub-direcotry to "nxp".
2. add helper.mk macro to extract compressed file.
changes since v1:
no changes.
---
package/Config.in | 1 +
package/nxp/Config.in | 4 ++++
package/nxp/helper.mk | 32 ++++++++++++++++++++++++++++++++
3 files changed, 37 insertions(+)
create mode 100644 package/nxp/Config.in
create mode 100644 package/nxp/helper.mk
diff --git a/package/Config.in b/package/Config.in
index bad4f9cba6..f9827769a2 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -497,6 +497,7 @@ endmenu
source "package/nvidia-driver/Config.in"
source "package/nvidia-tegra23/Config.in"
source "package/nvme/Config.in"
+ source "package/nxp/Config.in"
source "package/ofono/Config.in"
source "package/on2-8170-modules/Config.in"
source "package/open2300/Config.in"
diff --git a/package/nxp/Config.in b/package/nxp/Config.in
new file mode 100644
index 0000000000..575542c7ab
--- /dev/null
+++ b/package/nxp/Config.in
@@ -0,0 +1,4 @@
+menu "NXP QorIQ libraries"
+ depends on BR2_aarch64 || BR2_arm || BR2_powerpc64 || BR2_powerpc
+
+endmenu
diff --git a/package/nxp/helper.mk b/package/nxp/helper.mk
new file mode 100644
index 0000000000..79e4236249
--- /dev/null
+++ b/package/nxp/helper.mk
@@ -0,0 +1,32 @@
+################################################################################
+#
+# helper
+#
+################################################################################
+
+# Helper for self-extracting binaries distributed by NXP.
+#
+# The --force option makes sure it doesn't fail if the source
+# directory already exists. The --auto-accept skips the license check,
+# as it is not needed in Buildroot because we have legal-info. Since
+# there's a EULA in the binary file, we extract it in this macro, and
+# it should therefore be added to the LICENSE_FILES variable of
+# packages using this macro. Also, remember to set REDISTRIBUTE to
+# "NO". Indeed, this is a legal minefield: the EULA specifies that the
+# Board Support Package includes software and hardware (sic!) for
+# which a separate license is needed...
+#
+# $(1): full path to the archive file
+#
+define NXP_EXTRACT_HELPER
+ awk 'BEGIN { start = 0; } \
+ /^EOEULA/ { start = 0; } \
+ { if (start) print; } \
+ /<<EOEULA/ { start = 1; }' \
+ $(1) > $(@D)/EULA
+ cd $(@D) && sh $(1) --force --auto-accept
+ find $(@D)/$(basename $(notdir $(1))) -mindepth 1 -maxdepth 1 -exec mv {} $(@D) \;
+ rmdir $(@D)/$(basename $(notdir $(1)))
+endef
+
+include $(sort $(wildcard package/nxp/*/*.mk))
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v5 2/9] package/qoriq-rcw: move rcw into nxp and rename it
2020-02-07 8:38 [Buildroot] [PATCH v5 1/9] package/nxp: new package directory Changming Huang
@ 2020-02-07 8:38 ` Changming Huang
2020-04-14 9:35 ` Heiko Thiery
2020-12-16 21:02 ` Yann E. MORIN
2020-02-07 8:38 ` [Buildroot] [PATCH v5 3/9] package/qoriq-rcw: bump to version LSDK-19.09 Changming Huang
` (7 subsequent siblings)
8 siblings, 2 replies; 20+ messages in thread
From: Changming Huang @ 2020-02-07 8:38 UTC (permalink / raw)
To: buildroot
Move package/rcw into package/nxp,
and rename it to qoriq-rcw.
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
---
changes since v4:
no changes.
changes since v3:
no changes.
changes since v2:
1. change the package name to qoriq-rcw to keep consistent with imx-xxx.
2. add the handing in Config.in.legacy
changes since v1:
1. new patch.
2. move rcw to sub-directory freescale-qoriq.
3. rename to fsl-qoriq-rcw.
---
Config.in.legacy | 16 ++++++
DEVELOPERS | 2 +-
package/Config.in.host | 2 +-
package/{rcw => nxp/qoriq-rcw}/Config.in.host | 6 +--
.../rcw.hash => nxp/qoriq-rcw/qoriq-rcw.hash} | 2 +-
package/nxp/qoriq-rcw/qoriq-rcw.mk | 50 +++++++++++++++++++
package/rcw/rcw.mk | 50 -------------------
7 files changed, 72 insertions(+), 56 deletions(-)
rename package/{rcw => nxp/qoriq-rcw}/Config.in.host (88%)
rename package/{rcw/rcw.hash => nxp/qoriq-rcw/qoriq-rcw.hash} (82%)
create mode 100644 package/nxp/qoriq-rcw/qoriq-rcw.mk
delete mode 100644 package/rcw/rcw.mk
diff --git a/Config.in.legacy b/Config.in.legacy
index 3c6984d886..2473282e9d 100644
--- a/Config.in.legacy
+++ b/Config.in.legacy
@@ -258,6 +258,22 @@ config BR2_BINUTILS_VERSION_2_30_X
current default version (2.31 or later) has been selected
instead.
+config BR2_PACKAGE_HOST_RCW
+ bool "rcw package was removed"
+ select BR2_LEGACY
+ help
+ Because rcw package has been renamed to qoriq-rcw and moved
+ to "nxp", option BR2_PACKAGE_HOST_RCW is removed, the option
+ BR2_PACKAGE_HOST_QORIQ_RCW can be used for QorIQ platforms.
+
+config BR2_PACKAGE_HOST_RCW
+ bool "rcw package was removed"
+ select BR2_LEGACY
+ help
+ Because rcw package has been renamed to qoriq-rcw and moved
+ to "nxp", option BR2_PACKAGE_HOST_RCW is removed, the option
+ BR2_PACKAGE_HOST_QORIQ_RCW can be used for QorIQ platforms.
+
config BR2_PACKAGE_RPI_USERLAND_START_VCFILED
bool "rpi-userland start vcfiled was removed"
select BR2_LEGACY
diff --git a/DEVELOPERS b/DEVELOPERS
index d8ea23e0b3..e555b9773b 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1654,6 +1654,7 @@ F: package/mrouted/
F: package/mtd/
F: package/mtools/
F: package/nginx-upload/
+F: package/nxp/qoriq-rcw/
F: package/omniorb/
F: package/openresolv/
F: package/paxtest/
@@ -1674,7 +1675,6 @@ F: package/python-pyrex/
F: package/python-tinyrpc/
F: package/python-txdbus/
F: package/raptor/
-F: package/rcw/
F: package/rng-tools/
F: package/rsyslog/
F: package/setools/
diff --git a/package/Config.in.host b/package/Config.in.host
index 62e860d7c3..55f1e87f89 100644
--- a/package/Config.in.host
+++ b/package/Config.in.host
@@ -45,6 +45,7 @@ menu "Host utilities"
source "package/mtd/Config.in.host"
source "package/mtools/Config.in.host"
source "package/mxsldr/Config.in.host"
+ source "package/nxp/qoriq-rcw/Config.in.host"
source "package/omap-u-boot-utils/Config.in.host"
source "package/openocd/Config.in.host"
source "package/opkg-utils/Config.in.host"
@@ -62,7 +63,6 @@ menu "Host utilities"
source "package/qemu/Config.in.host"
source "package/raspberrypi-usbboot/Config.in.host"
source "package/rauc/Config.in.host"
- source "package/rcw/Config.in.host"
source "package/rustc/Config.in.host"
source "package/s6-rc/Config.in.host"
source "package/sam-ba/Config.in.host"
diff --git a/package/rcw/Config.in.host b/package/nxp/qoriq-rcw/Config.in.host
similarity index 88%
rename from package/rcw/Config.in.host
rename to package/nxp/qoriq-rcw/Config.in.host
index a9253958d9..8f78a40908 100644
--- a/package/rcw/Config.in.host
+++ b/package/nxp/qoriq-rcw/Config.in.host
@@ -1,4 +1,4 @@
-config BR2_PACKAGE_HOST_RCW
+config BR2_PACKAGE_HOST_QORIQ_RCW
bool "host rcw"
help
This package provides an reset configuration word(RCW)
@@ -11,9 +11,9 @@ config BR2_PACKAGE_HOST_RCW
https://source.codeaurora.org/external/qoriq/qoriq-components/rcw/
-if BR2_PACKAGE_HOST_RCW
+if BR2_PACKAGE_HOST_QORIQ_RCW
-config BR2_PACKAGE_HOST_RCW_CUSTOM_PATH
+config BR2_PACKAGE_HOST_QORIQ_RCW_CUSTOM_PATH
string "RCW Source file paths"
help
Space-separated list of .rcw and .rcwi files, that will be
diff --git a/package/rcw/rcw.hash b/package/nxp/qoriq-rcw/qoriq-rcw.hash
similarity index 82%
rename from package/rcw/rcw.hash
rename to package/nxp/qoriq-rcw/qoriq-rcw.hash
index 7de1ec659a..e9708d960d 100644
--- a/package/rcw/rcw.hash
+++ b/package/nxp/qoriq-rcw/qoriq-rcw.hash
@@ -1,3 +1,3 @@
# Locally calculated
-sha256 1421ada9fec10b12ff21cd9ad82f0a835b191cb2dde80f03547764574b1346c3 rcw-LSDK-18.12.tar.gz
+sha256 1421ada9fec10b12ff21cd9ad82f0a835b191cb2dde80f03547764574b1346c3 qoriq-rcw-LSDK-18.12.tar.gz
sha256 a531b3146425e592db17a51ff39c4801cb01fb4055ffdaada0572decc0655bcd LICENSE
diff --git a/package/nxp/qoriq-rcw/qoriq-rcw.mk b/package/nxp/qoriq-rcw/qoriq-rcw.mk
new file mode 100644
index 0000000000..3308f20192
--- /dev/null
+++ b/package/nxp/qoriq-rcw/qoriq-rcw.mk
@@ -0,0 +1,50 @@
+################################################################################
+#
+# qoriq-rcw
+#
+################################################################################
+
+QORIQ_RCW_VERSION = LSDK-18.12
+QORIQ_RCW_SITE = https://source.codeaurora.org/external/qoriq/qoriq-components/rcw
+QORIQ_RCW_SITE_METHOD = git
+QORIQ_RCW_LICENSE = BSD-3-Clause
+QORIQ_RCW_LICENSE_FILES = LICENSE
+
+QORIQ_RCW_FILES = $(call qstrip,$(BR2_PACKAGE_HOST_QORIQ_RCW_CUSTOM_PATH))
+
+ifneq ($(QORIQ_RCW_FILES),)
+# Get the name of the custom rcw file from the custom list
+QORIQ_RCW_PROJECT = $(notdir $(filter %.rcw,$(QORIQ_RCW_FILES)))
+
+# Error if there are no or more than one .rcw file
+ifeq ($(BR_BUILDING),y)
+ifneq ($(words $(QORIQ_RCW_PROJECT)),1)
+$(error BR2_PACKAGE_HOST_QORIQ_RCW_CUSTOM_PATH must have exactly one .rcw file)
+endif
+endif
+
+define HOST_QORIQ_RCW_ADD_CUSTOM_RCW_FILES
+ mkdir -p $(@D)/custom_board/rcw
+ cp -f $(filter-out %.rcw,$(QORIQ_RCW_FILES)) $(@D)/custom_board
+ cp -f $(filter %.rcw,$(QORIQ_RCW_FILES)) $(@D)/custom_board/rcw
+endef
+HOST_QORIQ_RCW_POST_PATCH_HOOKS += HOST_QORIQ_RCW_ADD_CUSTOM_RCW_FILES
+
+define HOST_QORIQ_RCW_BUILD_CMDS
+ python $(@D)/rcw.py -i $(@D)/custom_board/rcw/$(QORIQ_RCW_PROJECT) -I $(@D)/custom_board -o $(@D)/PBL.bin
+endef
+
+define HOST_QORIQ_RCW_INSTALL_DELIVERY_FILE
+ $(INSTALL) -D -m 0644 $(@D)/PBL.bin $(BINARIES_DIR)/PBL.bin
+endef
+endif
+
+# Copy source files and script into $(HOST_DIR)/share/rcw/ so a developer
+# could use a post image or SDK to build/install PBL files.
+define HOST_QORIQ_RCW_INSTALL_CMDS
+ mkdir -p $(HOST_DIR)/share/rcw
+ cp -a $(@D)/* $(HOST_DIR)/share/rcw
+ $(HOST_QORIQ_RCW_INSTALL_DELIVERY_FILE)
+endef
+
+$(eval $(host-generic-package))
diff --git a/package/rcw/rcw.mk b/package/rcw/rcw.mk
deleted file mode 100644
index 36d2da61b5..0000000000
--- a/package/rcw/rcw.mk
+++ /dev/null
@@ -1,50 +0,0 @@
-################################################################################
-#
-# rcw
-#
-################################################################################
-
-RCW_VERSION = LSDK-18.12
-RCW_SITE = https://source.codeaurora.org/external/qoriq/qoriq-components/rcw
-RCW_SITE_METHOD = git
-RCW_LICENSE = BSD-3-Clause
-RCW_LICENSE_FILES = LICENSE
-
-RCW_FILES = $(call qstrip,$(BR2_PACKAGE_HOST_RCW_CUSTOM_PATH))
-
-ifneq ($(RCW_FILES),)
-# Get the name of the custom rcw file from the custom list
-RCW_PROJECT = $(notdir $(filter %.rcw,$(RCW_FILES)))
-
-# Error if there are no or more than one .rcw file
-ifeq ($(BR_BUILDING),y)
-ifneq ($(words $(RCW_PROJECT)),1)
-$(error BR2_PACKAGE_HOST_RCW_CUSTOM_PATH must have exactly one .rcw file)
-endif
-endif
-
-define HOST_RCW_ADD_CUSTOM_RCW_FILES
- mkdir -p $(@D)/custom_board/rcw
- cp -f $(filter-out %.rcw,$(RCW_FILES)) $(@D)/custom_board
- cp -f $(filter %.rcw,$(RCW_FILES)) $(@D)/custom_board/rcw
-endef
-HOST_RCW_POST_PATCH_HOOKS += HOST_RCW_ADD_CUSTOM_RCW_FILES
-
-define HOST_RCW_BUILD_CMDS
- python $(@D)/rcw.py -i $(@D)/custom_board/rcw/$(RCW_PROJECT) -I $(@D)/custom_board -o $(@D)/PBL.bin
-endef
-
-define HOST_RCW_INSTALL_DELIVERY_FILE
- $(INSTALL) -D -m 0644 $(@D)/PBL.bin $(BINARIES_DIR)/PBL.bin
-endef
-endif
-
-# Copy source files and script into $(HOST_DIR)/share/rcw/ so a developer
-# could use a post image or SDK to build/install PBL files.
-define HOST_RCW_INSTALL_CMDS
- mkdir -p $(HOST_DIR)/share/rcw
- cp -a $(@D)/* $(HOST_DIR)/share/rcw
- $(HOST_RCW_INSTALL_DELIVERY_FILE)
-endef
-
-$(eval $(host-generic-package))
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v5 3/9] package/qoriq-rcw: bump to version LSDK-19.09
2020-02-07 8:38 [Buildroot] [PATCH v5 1/9] package/nxp: new package directory Changming Huang
2020-02-07 8:38 ` [Buildroot] [PATCH v5 2/9] package/qoriq-rcw: move rcw into nxp and rename it Changming Huang
@ 2020-02-07 8:38 ` Changming Huang
2020-02-07 8:38 ` [Buildroot] [PATCH v5 4/9] package/qoriq-rcw: add target rcw binary support Changming Huang
` (6 subsequent siblings)
8 siblings, 0 replies; 20+ messages in thread
From: Changming Huang @ 2020-02-07 8:38 UTC (permalink / raw)
To: buildroot
From: Jerry Huang <jerry.huang@nxp.com>
Change the RCW version to LSDK-19.09.
Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
---
changes since v4:
no changes.
changes since v3:
no changes.
changes since v2:
1. change the hash value.
changes since v1:
1. add-back license hash.
---
package/nxp/qoriq-rcw/qoriq-rcw.hash | 2 +-
package/nxp/qoriq-rcw/qoriq-rcw.mk | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/nxp/qoriq-rcw/qoriq-rcw.hash b/package/nxp/qoriq-rcw/qoriq-rcw.hash
index e9708d960d..88460716f9 100644
--- a/package/nxp/qoriq-rcw/qoriq-rcw.hash
+++ b/package/nxp/qoriq-rcw/qoriq-rcw.hash
@@ -1,3 +1,3 @@
# Locally calculated
-sha256 1421ada9fec10b12ff21cd9ad82f0a835b191cb2dde80f03547764574b1346c3 qoriq-rcw-LSDK-18.12.tar.gz
+sha256 4a9ce5bb1733239bf1b740b705df20f90802b16114e24f3fd56c08a7ba4b56c2 qoriq-rcw-LSDK-19.09.tar.gz
sha256 a531b3146425e592db17a51ff39c4801cb01fb4055ffdaada0572decc0655bcd LICENSE
diff --git a/package/nxp/qoriq-rcw/qoriq-rcw.mk b/package/nxp/qoriq-rcw/qoriq-rcw.mk
index 3308f20192..7a0494adc6 100644
--- a/package/nxp/qoriq-rcw/qoriq-rcw.mk
+++ b/package/nxp/qoriq-rcw/qoriq-rcw.mk
@@ -4,7 +4,7 @@
#
################################################################################
-QORIQ_RCW_VERSION = LSDK-18.12
+QORIQ_RCW_VERSION = LSDK-19.09
QORIQ_RCW_SITE = https://source.codeaurora.org/external/qoriq/qoriq-components/rcw
QORIQ_RCW_SITE_METHOD = git
QORIQ_RCW_LICENSE = BSD-3-Clause
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v5 4/9] package/qoriq-rcw: add target rcw binary support
2020-02-07 8:38 [Buildroot] [PATCH v5 1/9] package/nxp: new package directory Changming Huang
2020-02-07 8:38 ` [Buildroot] [PATCH v5 2/9] package/qoriq-rcw: move rcw into nxp and rename it Changming Huang
2020-02-07 8:38 ` [Buildroot] [PATCH v5 3/9] package/qoriq-rcw: bump to version LSDK-19.09 Changming Huang
@ 2020-02-07 8:38 ` Changming Huang
2022-01-06 14:48 ` Arnout Vandecappelle
2020-02-07 8:38 ` [Buildroot] [PATCH v5 5/9] boot/arm-trusted-firmware: allow additional make dependencies Changming Huang
` (5 subsequent siblings)
8 siblings, 1 reply; 20+ messages in thread
From: Changming Huang @ 2020-02-07 8:38 UTC (permalink / raw)
To: buildroot
From: Jerry Huang <jerry.huang@nxp.com>
For NXP QorIQ (PowerPC and Layerscape) platform,
we need to specify the RCW file and build it to binary.
Introduce BR2_PACKAGE_HOST_QORIQ_RCW_BIN to specify the RCW binary file.
Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
---
changes since v4:
no changes.
changes since v3:
no changes.
changes since v2:
1. modify the patch descrition.
2. more detail for BR2_PACKAGE_HOST_QORIQ_RCW_BIN.
3. remove two options not used in this patch.
4. add the condition detection in makefile for QorIQ RCW.
changes since v1:
1. add option BR2_PACKAGE_HOST_RCW_ATF for ATF.
---
package/nxp/qoriq-rcw/Config.in.host | 12 ++++++++++++
package/nxp/qoriq-rcw/qoriq-rcw.mk | 15 +++++++++++++++
2 files changed, 27 insertions(+)
diff --git a/package/nxp/qoriq-rcw/Config.in.host b/package/nxp/qoriq-rcw/Config.in.host
index 8f78a40908..9bf55894e8 100644
--- a/package/nxp/qoriq-rcw/Config.in.host
+++ b/package/nxp/qoriq-rcw/Config.in.host
@@ -25,4 +25,16 @@ config BR2_PACKAGE_HOST_QORIQ_RCW_CUSTOM_PATH
included for use in the SDK or with post scripts but no
RCW binary will not be generated.
+config BR2_PACKAGE_HOST_QORIQ_RCW_BIN
+ string "Custom RCW"
+ depends on !BR2_PACKAGE_HOST_QORIQ_RCW_CUSTOM_PATH
+ help
+ This option is used to specify the RCW binary file for board.
+ which is composed with platform/serdes_value/rcw_file, platform
+ is the platform name, serdes_value is the setting of the Serdes,
+ rcw_file is the file name of RCW, for example:
+ "ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.bin"
+
+ If this option is empty, no rcw file is used.
+
endif
diff --git a/package/nxp/qoriq-rcw/qoriq-rcw.mk b/package/nxp/qoriq-rcw/qoriq-rcw.mk
index 7a0494adc6..bbd085f277 100644
--- a/package/nxp/qoriq-rcw/qoriq-rcw.mk
+++ b/package/nxp/qoriq-rcw/qoriq-rcw.mk
@@ -37,6 +37,21 @@ endef
define HOST_QORIQ_RCW_INSTALL_DELIVERY_FILE
$(INSTALL) -D -m 0644 $(@D)/PBL.bin $(BINARIES_DIR)/PBL.bin
endef
+else
+QORIQ_RCW_PATH_FILE_BIN = $(call qstrip,$(BR2_PACKAGE_HOST_QORIQ_RCW_BIN))
+
+ifneq ($(QORIQ_RCW_PATH_FILE_BIN),)
+QORIQ_RCW_PLATFORM = $(firstword $(subst /, ,$(QORIQ_RCW_PATH_FILE_BIN)))
+QORIQ_RCW_FILE_BIN = $(lastword $(subst /, ,$(QORIQ_RCW_PATH_FILE_BIN)))
+
+define HOST_QORIQ_RCW_BUILD_CMDS
+ $(MAKE) -C $(@D)/$(QORIQ_RCW_PLATFORM)
+endef
+
+define HOST_QORIQ_RCW_INSTALL_DELIVERY_FILE
+ $(INSTALL) -D -m 0644 $(@D)/$(QORIQ_RCW_PATH_FILE_BIN) $(BINARIES_DIR)/$(QORIQ_RCW_FILE_BIN)
+endef
+endif
endif
# Copy source files and script into $(HOST_DIR)/share/rcw/ so a developer
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v5 5/9] boot/arm-trusted-firmware: allow additional make dependencies
2020-02-07 8:38 [Buildroot] [PATCH v5 1/9] package/nxp: new package directory Changming Huang
` (2 preceding siblings ...)
2020-02-07 8:38 ` [Buildroot] [PATCH v5 4/9] package/qoriq-rcw: add target rcw binary support Changming Huang
@ 2020-02-07 8:38 ` Changming Huang
2022-01-06 15:05 ` Arnout Vandecappelle
2020-02-07 8:38 ` [Buildroot] [PATCH v5 6/9] package/qoriq-cadence-dp-firmware: new package Changming Huang
` (4 subsequent siblings)
8 siblings, 1 reply; 20+ messages in thread
From: Changming Huang @ 2020-02-07 8:38 UTC (permalink / raw)
To: buildroot
Allow specifying additional build dependencies for ATF.
This might be more useful when using a custom git repository.
For example, when using with the ATF repository from NXP QorIQ,
the qoriq-rcw is used to build the pbl binary image.
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
---
changes since v4:
1. remove the option BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS.
2. modify the description.
changes since v3:
no changes.
changes since v2:
1. introduce option BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS.
2. introduce option BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_DEPENDENCIES.
3. rewrite the makefile with these two options
changes since v1:
1. Use option BR2_PACKAGE_HOST_RCW_ATF as the condition for RCW used by ATF.
---
boot/arm-trusted-firmware/Config.in | 5 +++++
boot/arm-trusted-firmware/arm-trusted-firmware.mk | 3 +++
2 files changed, 8 insertions(+)
diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in
index 373591d497..c9b74064d7 100644
--- a/boot/arm-trusted-firmware/Config.in
+++ b/boot/arm-trusted-firmware/Config.in
@@ -142,6 +142,11 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS
E.G. When using the QorIQ custom ATF repository from NXP,
the target 'pbl' can be used to build the pbl binary.
+config BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_DEPENDENCIES
+ string "Additional AFT dependencies"
+ help
+ Additional dependencies for ATF build, E.G. "host-qoriq-rcw"
+
config BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES
string "Additional ATF build variables"
help
diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
index bf1ac46cf6..43be2fef99 100644
--- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk
+++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
@@ -92,6 +92,9 @@ endif
ARM_TRUSTED_FIRMWARE_MAKE_TARGETS = all
+ARM_TRUSTED_FIRMWARE_DEPENDENCIES += \
+ $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_DEPENDENCIES))
+
ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP),y)
ARM_TRUSTED_FIRMWARE_MAKE_TARGETS += fip
ARM_TRUSTED_FIRMWARE_DEPENDENCIES += host-openssl
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v5 6/9] package/qoriq-cadence-dp-firmware: new package
2020-02-07 8:38 [Buildroot] [PATCH v5 1/9] package/nxp: new package directory Changming Huang
` (3 preceding siblings ...)
2020-02-07 8:38 ` [Buildroot] [PATCH v5 5/9] boot/arm-trusted-firmware: allow additional make dependencies Changming Huang
@ 2020-02-07 8:38 ` Changming Huang
2022-01-06 15:14 ` Michael Walle
2022-01-06 15:19 ` Arnout Vandecappelle
2020-02-07 8:38 ` [Buildroot] [PATCH v5 7/9] package/qoriq-rcw:Enable IIC5_PMUX and CLK_OUT_PMUX for GPIO Changming Huang
` (3 subsequent siblings)
8 siblings, 2 replies; 20+ messages in thread
From: Changming Huang @ 2020-02-07 8:38 UTC (permalink / raw)
To: buildroot
From: Jerry Huang <jerry.huang@nxp.com>
This package provides the firmware for LS1028ARDB DP (display port).
Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
---
changes since v4:
1. remove the variable NXP_QORIQ_SITE.
2. use the url for qoriq-cadence-dp-firmware site directly.
changes since v3:
no changes.
changes since v2:
1. change the package name to qoriq-cadence-dp-firmware.
2. add the hash of COPYING.
3. modify makefile with new option.
4. update DEVELOPERS with alphabetic ordering
changes since v1:
1. rename the package to fsl-qoriq-cadence-dp-fw.
2. update DEVELOPERS.
3. add the hash of package.
4. modify the context fo config file to package name.
5. re-write the makefile according to rule of buildroot.
6. add the license message in makefile.
---
DEVELOPERS | 3 +++
package/nxp/Config.in | 2 ++
.../nxp/qoriq-cadence-dp-firmware/Config.in | 4 ++++
.../qoriq-cadence-dp-firmware.hash | 3 +++
.../qoriq-cadence-dp-firmware.mk | 23 +++++++++++++++++++
5 files changed, 35 insertions(+)
create mode 100644 package/nxp/qoriq-cadence-dp-firmware/Config.in
create mode 100644 package/nxp/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.hash
create mode 100644 package/nxp/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.mk
diff --git a/DEVELOPERS b/DEVELOPERS
index e555b9773b..ffb07d67ea 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -529,6 +529,9 @@ F: configs/nanopi_m1_plus_defconfig
F: configs/olimex_a13_olinuxino_defconfig
F: configs/orangepi_plus_defconfig
+N: Changming Huang <jerry.huang@nxp.com>
+F: package/nxp/qoriq-cadence-dp-firmware/
+
N: Chris Packham <judge.packham@gmail.com>
F: package/gstreamer1/gst1-shark/
F: package/micropython/
diff --git a/package/nxp/Config.in b/package/nxp/Config.in
index 575542c7ab..855d62700b 100644
--- a/package/nxp/Config.in
+++ b/package/nxp/Config.in
@@ -1,4 +1,6 @@
menu "NXP QorIQ libraries"
depends on BR2_aarch64 || BR2_arm || BR2_powerpc64 || BR2_powerpc
+source "package/nxp/qoriq-cadence-dp-firmware/Config.in"
+
endmenu
diff --git a/package/nxp/qoriq-cadence-dp-firmware/Config.in b/package/nxp/qoriq-cadence-dp-firmware/Config.in
new file mode 100644
index 0000000000..3f494bd3a3
--- /dev/null
+++ b/package/nxp/qoriq-cadence-dp-firmware/Config.in
@@ -0,0 +1,4 @@
+config BR2_PACKAGE_QORIQ_CADENCE_DP_FIRMWARE
+ bool "qoriq-cadence-dp-firmware"
+ help
+ NXP QorIQ cadence DP firmware, a resident EL3 firmware.
diff --git a/package/nxp/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.hash b/package/nxp/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.hash
new file mode 100644
index 0000000000..89aaf1d71b
--- /dev/null
+++ b/package/nxp/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.hash
@@ -0,0 +1,3 @@
+# Locally calculated
+sha256 5871c5717be32f14a59624d5699d405e8ce9ae2e9c9ef86fd16e13d264a40e58 firmware-cadence-lsdk1909.bin
+sha256 d55f024af2bfff714b90de596f6d0399124b999e8c18a86b13a3b507bae6f561 COPYING
diff --git a/package/nxp/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.mk b/package/nxp/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.mk
new file mode 100644
index 0000000000..5c29602574
--- /dev/null
+++ b/package/nxp/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.mk
@@ -0,0 +1,23 @@
+################################################################################
+#
+# qoriq-cadence-dp-firmware
+#
+################################################################################
+
+QORIQ_CADENCE_DP_FIRMWARE_VERSION = lsdk1909
+QORIQ_CADENCE_DP_FIRMWARE_SITE = http://www.nxp.com/lgfiles/sdk/$(QORIQ_CADENCE_DP_FIRMWARE_VERSION)
+QORIQ_CADENCE_DP_FIRMWARE_SOURCE = firmware-cadence-$(QORIQ_CADENCE_DP_FIRMWARE_VERSION).bin
+QORIQ_CADENCE_DP_FIRMWARE_LICENSE = NXP-Binary-EULA
+QORIQ_CADENCE_DP_FIRMWARE_LICENSE_FILES = COPYING
+QORIQ_CADENCE_DP_FIRMWARE_INSTALL_IMAGES = YES
+QORIQ_CADENCE_DP_FIRMWARE_INSTALL_TARGET = NO
+
+define QORIQ_CADENCE_DP_FIRMWARE_EXTRACT_CMDS
+ $(call NXP_EXTRACT_HELPER,$(QORIQ_CADENCE_DP_FIRMWARE_DL_DIR)/$(QORIQ_CADENCE_DP_FIRMWARE_SOURCE))
+endef
+
+define QORIQ_CADENCE_DP_FIRMWARE_INSTALL_IMAGES_CMDS
+ $(INSTALL) -D -m 0644 $(@D)/dp/ls1028a-dp-fw.bin $(BINARIES_DIR)/ls1028a-dp-fw.bin
+endef
+
+$(eval $(generic-package))
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v5 7/9] package/qoriq-rcw:Enable IIC5_PMUX and CLK_OUT_PMUX for GPIO
2020-02-07 8:38 [Buildroot] [PATCH v5 1/9] package/nxp: new package directory Changming Huang
` (4 preceding siblings ...)
2020-02-07 8:38 ` [Buildroot] [PATCH v5 6/9] package/qoriq-cadence-dp-firmware: new package Changming Huang
@ 2020-02-07 8:38 ` Changming Huang
2022-01-06 15:54 ` Arnout Vandecappelle
2020-02-07 8:38 ` [Buildroot] [PATCH v5 8/9] package/nxp/qoriq-rcw: introduce BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE for boot mode Changming Huang
` (2 subsequent siblings)
8 siblings, 1 reply; 20+ messages in thread
From: Changming Huang @ 2020-02-07 8:38 UTC (permalink / raw)
To: buildroot
From: Jerry Huang <jerry.huang@nxp.com>
Because GPIO is used as interrupt for eNETC PHY and Micro-bus,
IIC5_PMUX and CLK_OUT_PMUX are enabled for GPIO.
Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
---
changes since v4:
no changes.
changes since v3:
no changes.
changes since v2:
no changes.
changes since v1:
1. change to unconditional for these two patches.
---
...b-Enable-IIC5_PMUX-for-GPIO-function.patch | 42 +++++++++++++++++++
...nable-CLK_OUT_PMUX-for-GPIO-function.patch | 40 ++++++++++++++++++
2 files changed, 82 insertions(+)
create mode 100644 package/nxp/qoriq-rcw/0001-ls1028ardb-Enable-IIC5_PMUX-for-GPIO-function.patch
create mode 100644 package/nxp/qoriq-rcw/0002-ls1028ardb-Enable-CLK_OUT_PMUX-for-GPIO-function.patch
diff --git a/package/nxp/qoriq-rcw/0001-ls1028ardb-Enable-IIC5_PMUX-for-GPIO-function.patch b/package/nxp/qoriq-rcw/0001-ls1028ardb-Enable-IIC5_PMUX-for-GPIO-function.patch
new file mode 100644
index 0000000000..21c6c84cbd
--- /dev/null
+++ b/package/nxp/qoriq-rcw/0001-ls1028ardb-Enable-IIC5_PMUX-for-GPIO-function.patch
@@ -0,0 +1,42 @@
+From 33b403cee1fa215927bc65dc14baf35a2fdbe7b3 Mon Sep 17 00:00:00 2001
+From: Jerry Huang <jerry.huang@nxp.com>
+Date: Thu, 19 Sep 2019 12:12:20 +0800
+Subject: [PATCH 1/2] ls1028ardb: Enable IIC5_PMUX for GPIO function
+
+Set IIC5_PMUX = 1 to enable GPIO function.
+
+Signed-off-by: Jianchao Wang <jianchao.wang@nxp.com>
+Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
+---
+ ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw | 2 +-
+ ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
+index b46ea2e..5466a63 100644
+--- a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
++++ b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
+@@ -26,7 +26,7 @@ SYSCLK_FREQ=600
+ IIC2_PMUX=6
+ IIC3_PMUX=2
+ IIC4_PMUX=2
+-IIC5_PMUX=2
++IIC5_PMUX=1
+ IIC6_PMUX=2
+ CLK_OUT_PMUX=2
+ EC1_SAI4_5_PMUX=5
+diff --git a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
+index 04e2208..1908d8c 100644
+--- a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
++++ b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
+@@ -26,7 +26,7 @@ SYSCLK_FREQ=600
+ IIC2_PMUX=6
+ IIC3_PMUX=2
+ IIC4_PMUX=2
+-IIC5_PMUX=2
++IIC5_PMUX=1
+ IIC6_PMUX=3
+ CLK_OUT_PMUX=2
+ EC1_SAI4_5_PMUX=5
+--
+2.17.1
diff --git a/package/nxp/qoriq-rcw/0002-ls1028ardb-Enable-CLK_OUT_PMUX-for-GPIO-function.patch b/package/nxp/qoriq-rcw/0002-ls1028ardb-Enable-CLK_OUT_PMUX-for-GPIO-function.patch
new file mode 100644
index 0000000000..4f00541d69
--- /dev/null
+++ b/package/nxp/qoriq-rcw/0002-ls1028ardb-Enable-CLK_OUT_PMUX-for-GPIO-function.patch
@@ -0,0 +1,40 @@
+From 4a3c9ea5d0c7bf8eec8cb6276d6f4d940f3946db Mon Sep 17 00:00:00 2001
+From: Jerry Huang <jerry.huang@nxp.com>
+Date: Thu, 19 Sep 2019 12:13:48 +0800
+Subject: [PATCH 2/2] ls1028ardb/rcw: Enable CLK_OUT_PMUX for GPIO function
+
+Signed-off-by: Jianchao Wang <jianchao.wang@nxp.com>
+Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
+---
+ ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw | 2 +-
+ ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
+index 5466a63..a5ed4d4 100644
+--- a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
++++ b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
+@@ -28,7 +28,7 @@ IIC3_PMUX=2
+ IIC4_PMUX=2
+ IIC5_PMUX=1
+ IIC6_PMUX=2
+-CLK_OUT_PMUX=2
++CLK_OUT_PMUX=1
+ EC1_SAI4_5_PMUX=5
+ EC1_SAI3_6_PMUX=5
+ USB3_CLK_FSEL=39
+diff --git a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
+index 1908d8c..c930b83 100644
+--- a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
++++ b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
+@@ -28,7 +28,7 @@ IIC3_PMUX=2
+ IIC4_PMUX=2
+ IIC5_PMUX=1
+ IIC6_PMUX=3
+-CLK_OUT_PMUX=2
++CLK_OUT_PMUX=1
+ EC1_SAI4_5_PMUX=5
+ EC1_SAI3_6_PMUX=5
+ USB3_CLK_FSEL=39
+--
+2.17.1
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v5 8/9] package/nxp/qoriq-rcw: introduce BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE for boot mode
2020-02-07 8:38 [Buildroot] [PATCH v5 1/9] package/nxp: new package directory Changming Huang
` (5 preceding siblings ...)
2020-02-07 8:38 ` [Buildroot] [PATCH v5 7/9] package/qoriq-rcw:Enable IIC5_PMUX and CLK_OUT_PMUX for GPIO Changming Huang
@ 2020-02-07 8:38 ` Changming Huang
2022-01-06 15:55 ` Arnout Vandecappelle
2020-02-07 8:38 ` [Buildroot] [PATCH v5 9/9] board/nxp/ls1028ardb: new board Changming Huang
2022-01-06 14:45 ` [Buildroot] [PATCH v5 1/9] package/nxp: new package directory Arnout Vandecappelle
8 siblings, 1 reply; 20+ messages in thread
From: Changming Huang @ 2020-02-07 8:38 UTC (permalink / raw)
To: buildroot
Introduce BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE for the boot mode.
Because the RCW binary can be stored in different media, for example:
sd - RCW locate in SD card, boot the board from SD card
emmc - RCW locate in eMMC chip, boot the board from eMMC chip
qspi - RCW locate in QSPI flash, boot the board from QSPI flash
flexspi_nor - RCW locate in flexSPI, boot the board from flexSPI Nor/Nand flash
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
---
changes since v4:
no changes.
changes since v3:
1. split this option from board patch.
---
package/nxp/qoriq-rcw/Config.in.host | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/package/nxp/qoriq-rcw/Config.in.host b/package/nxp/qoriq-rcw/Config.in.host
index 9bf55894e8..7f5fbb3202 100644
--- a/package/nxp/qoriq-rcw/Config.in.host
+++ b/package/nxp/qoriq-rcw/Config.in.host
@@ -37,4 +37,10 @@ config BR2_PACKAGE_HOST_QORIQ_RCW_BIN
If this option is empty, no rcw file is used.
+config BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE
+ string "QorIQ RCW Boot mode"
+ depends on !BR2_PACKAGE_HOST_QORIQ_RCW_CUSTOM_PATH
+ help
+ Specify the boot mode, for example, sd, emmc, flexspi_nor.
+
endif
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v5 9/9] board/nxp/ls1028ardb: new board
2020-02-07 8:38 [Buildroot] [PATCH v5 1/9] package/nxp: new package directory Changming Huang
` (6 preceding siblings ...)
2020-02-07 8:38 ` [Buildroot] [PATCH v5 8/9] package/nxp/qoriq-rcw: introduce BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE for boot mode Changming Huang
@ 2020-02-07 8:38 ` Changming Huang
2022-01-06 16:27 ` Arnout Vandecappelle
2022-01-06 14:45 ` [Buildroot] [PATCH v5 1/9] package/nxp: new package directory Arnout Vandecappelle
8 siblings, 1 reply; 20+ messages in thread
From: Changming Huang @ 2020-02-07 8:38 UTC (permalink / raw)
To: buildroot
This is to support NXP LS1028ARDB board in Buildroot.
The board is setup to track the Linux at 4.19 via NXP LSDK-19.09.
The target will build uboot and RCW binary with arm-trusted-firmware support.
board/nxp/ls1028ardb/: scripts related with ls1028ardb
nxp_ls1028ardb-64b_defconfig: defconfig boot from SD card
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
---
changes since v4:
1. change the uboot version to LSDK-19.09-update-311219.
2. change the linux version to LSDK-19.09-update-311219-V4.19.
3. change the NXP atf version to LSDK-19.09-update-311219.
changes since v3:
1. merge previous version patch 8 and patch 9 to one.
2. split RCW options BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE to another patch.
3. remove scritps about emmc and xspi.
4. remove xspi and emmc configuration.
5. add new option BR2_ROOTFS_OVERLAY for 10-network.rules.
6. modify u-boot environment scripts, remove all setting not used.
7. remove the scripts which is not used by default configuration.
changes since v2:
1. Modify the qoriq-cadence-dp-firmware option in defconfig.
2. rename defconfig to nxp_ls1028*.
3. remove extra packages except busybox in defconfig.
4. modify the description of file genimage.xspi.cfg.template.
changes since v1:
1. add new option in configs/freescale_ls1028ardb-xxxx_defconfig.
---
board/nxp/common/ls/busybox.config | 9 ++
board/nxp/ls1028ardb/genimage.sd.cfg.template | 52 ++++++++++++
board/nxp/ls1028ardb/post-image.sh | 57 +++++++++++++
board/nxp/ls1028ardb/readme.txt | 61 +++++++++++++
.../etc/udev/rules.d/10-network.rules | 16 ++++
.../nxp/ls1028ardb/u-boot-environment-sd.txt | 13 +++
configs/nxp_ls1028ardb-64b_defconfig | 85 +++++++++++++++++++
7 files changed, 293 insertions(+)
create mode 100644 board/nxp/common/ls/busybox.config
create mode 100644 board/nxp/ls1028ardb/genimage.sd.cfg.template
create mode 100755 board/nxp/ls1028ardb/post-image.sh
create mode 100644 board/nxp/ls1028ardb/readme.txt
create mode 100644 board/nxp/ls1028ardb/rootfs_overlay/etc/udev/rules.d/10-network.rules
create mode 100644 board/nxp/ls1028ardb/u-boot-environment-sd.txt
create mode 100644 configs/nxp_ls1028ardb-64b_defconfig
diff --git a/board/nxp/common/ls/busybox.config b/board/nxp/common/ls/busybox.config
new file mode 100644
index 0000000000..7074c65aa6
--- /dev/null
+++ b/board/nxp/common/ls/busybox.config
@@ -0,0 +1,9 @@
+#
+# Additional Busybox Settings
+#
+CONFIG_TASKSET=y
+CONFIG_FEATURE_TASKSET_FANCY=y
+CONFIG_FEATURE_DF_FANCY=y
+CONFIG_FEATURE_SEAMLESS_GZ=y
+CONFIG_FEATURE_SEAMLESS_BZ2=y
+CONFIG_FEATURE_SEAMLESS_XZ=y
diff --git a/board/nxp/ls1028ardb/genimage.sd.cfg.template b/board/nxp/ls1028ardb/genimage.sd.cfg.template
new file mode 100644
index 0000000000..ab50e103c1
--- /dev/null
+++ b/board/nxp/ls1028ardb/genimage.sd.cfg.template
@@ -0,0 +1,52 @@
+# Minimal SD card image for the NXP boards Template
+#
+# SD card image (sdcard.img) format:
+# * the SD card must have 4 kB free space at the beginning,
+# * U-Boot is dumped as is,
+# * a FAT partition at offset 64 MB is containing Image and DTB files
+# * a single root filesystem partition is required (ext2, ext3 or ext4)
+#
+
+image boot.vfat {
+ vfat {
+ files = {
+ %FILES%
+ }
+ }
+ size = 256M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition rcw {
+ in-partition-table = "no"
+ image = "bl2_sd.pbl"
+ offset = 4096
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "fip.bin"
+ offset = 1M
+ }
+
+ partition u-boot-environment {
+ in-partition-table = "no"
+ image = "uboot-env.bin"
+ offset = 5M
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ offset = 64M
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext2"
+ }
+}
diff --git a/board/nxp/ls1028ardb/post-image.sh b/board/nxp/ls1028ardb/post-image.sh
new file mode 100755
index 0000000000..c655074386
--- /dev/null
+++ b/board/nxp/ls1028ardb/post-image.sh
@@ -0,0 +1,57 @@
+#!/usr/bin/env bash
+# args from BR2_ROOTFS_POST_SCRIPT_ARGS
+# $2 linux building directory
+# $3 buildroot top directory
+# $4 u-boot building directory
+
+#
+# dtb_list extracts the list of DTB files from BR2_LINUX_KERNEL_INTREE_DTS_NAME
+# in ${BR_CONFIG}, then prints the corresponding list of file names for the
+# genimage configuration file
+#
+dtb_file()
+{
+ local DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([\/a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})"
+
+ for dt in $DTB_LIST; do
+ echo -n "\"`basename $dt`.dtb\", "
+ done
+}
+
+#
+# genimage.sd.cfg.template: Boot from SD
+# genimage.emmc.cfg.template: Boot from eMMC
+#
+genimage_type()
+{
+ if grep -Eq "^BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE=\"emmc\"$" ${BR2_CONFIG}; then
+ echo "genimage.emmc.cfg.template"
+ elif grep -Eq "^BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE=\"sd\"$" ${BR2_CONFIG}; then
+ echo "genimage.sd.cfg.template"
+ fi
+}
+
+main()
+{
+ local FILES="$(dtb_file) "ls1028a-dp-fw.bin", "Image""
+ local GENIMAGE_CFG="$(mktemp --suffix genimage.cfg)"
+ local GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+ sed -e "s/%FILES%/${FILES}/" \
+ board/nxp/ls1028ardb/$(genimage_type) > ${GENIMAGE_CFG}
+
+ rm -rf "${GENIMAGE_TMP}"
+
+ genimage \
+ --rootpath "${TARGET_DIR}" \
+ --tmppath "${GENIMAGE_TMP}" \
+ --inputpath "${BINARIES_DIR}" \
+ --outputpath "${BINARIES_DIR}" \
+ --config "${GENIMAGE_CFG}"
+
+ rm -f ${GENIMAGE_CFG}
+
+ exit $?
+}
+
+main $@
diff --git a/board/nxp/ls1028ardb/readme.txt b/board/nxp/ls1028ardb/readme.txt
new file mode 100644
index 0000000000..713babd7c3
--- /dev/null
+++ b/board/nxp/ls1028ardb/readme.txt
@@ -0,0 +1,61 @@
+LS1028ARDB board is one platform based on LS1028A silicon for industry,
+which is supported in LSDK-19.09.
+
+One simple image file is created by buildroot, which includes RCW, uboot,
+Linux kernel, rootfs and other necessary binaries for this board.
+
+To program the image file created by buildroot into the flash.
+There are two way to do it:
+
+1. Program the image file on PC machine for SD card boot
+ $ sudo dd if=./output/images/sdcard.img of=/dev/sdx
+ # or in some other host machine:
+ $ sudo dd if=./output/images/sdcard.img of=/dev/mmcblkx
+
+ # find the right SD Card device name in your host machine and replace the
+ # ?sdx? or ?mmcblkx?.
+
+2. Program the image file on board for eMMC and XSPI boot
+Make sure your board has ipaddr, netmask, and serverip defined to reach your
+tftp server.
+
+ 2.1 Program eMMC boot image file to eMMC chip
+ # Make sure output/images/sdcard.img is stored to tftp server
+ # Below command is one example
+ => tftpboot 0xa0000000 sdcard.img
+ => mmc dev 1
+ => mmc erase 0 0x200000
+ => mmc write 0xa0000000 0 0x200000
+
+ # The size "0x200000" will be changed when the image size is different.
+
+ 2.2 Program XSPI boot image file to flash
+ # Make sure output/images/xspi.cpio.img is stored to tftp server
+ # Below command is one example
+ => tftpboot 0xa0000000 xspi.cpio.img
+ => sf probe
+ => sf erase 0 $filesize
+ => sf write 0xa0000000 0 $filesize
+
+3. Booting your new system
+Before booting the new system, we should make sure the switch setting is right.
+below switch setting is for each booting mode:
+ +-----------+---------------------+
+ |Boot mode | Switch setting |
+ +---------------------------------+
+ |SD boot | SW2[1~4] = 0b?1000 |
+ +---------------------------------+
+ |eMMC boot | SW2[1~4] = 0b?1001 |
+ +---------------------------------+
+ |XSPI boot | SW2[1~4] = 0b?1111 |
+ +-----------+---------------------+
+
+or we use following command to reset the board in uboot prompt:
+ # boot from SD card
+ => qixis_reset sd
+
+ # boot from eMMC chip
+ => qixis_reset emmc
+
+ # boot from XSPI
+ => qixis_reset qspi
diff --git a/board/nxp/ls1028ardb/rootfs_overlay/etc/udev/rules.d/10-network.rules b/board/nxp/ls1028ardb/rootfs_overlay/etc/udev/rules.d/10-network.rules
new file mode 100644
index 0000000000..19f41634bd
--- /dev/null
+++ b/board/nxp/ls1028ardb/rootfs_overlay/etc/udev/rules.d/10-network.rules
@@ -0,0 +1,16 @@
+# ENETC rules
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.0", DRIVERS=="fsl_enetc", NAME:="eno0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.1", DRIVERS=="fsl_enetc", NAME:="eno1"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.2", DRIVERS=="fsl_enetc", NAME:="eno2"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.6", DRIVERS=="fsl_enetc", NAME:="eno3"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.0", DRIVERS=="fsl_enetc_vf", NAME:="eno0vf0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.1", DRIVERS=="fsl_enetc_vf", NAME:="eno0vf1"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.2", DRIVERS=="fsl_enetc_vf", NAME:="eno1vf0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.3", DRIVERS=="fsl_enetc_vf", NAME:="eno1vf1"
+# LS1028 switch rules
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p0", NAME="swp0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p1", NAME="swp1"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p2", NAME="swp2"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p3", NAME="swp3"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p4", NAME="swp4"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p5", NAME="swp5"
diff --git a/board/nxp/ls1028ardb/u-boot-environment-sd.txt b/board/nxp/ls1028ardb/u-boot-environment-sd.txt
new file mode 100644
index 0000000000..f91e6b585f
--- /dev/null
+++ b/board/nxp/ls1028ardb/u-boot-environment-sd.txt
@@ -0,0 +1,13 @@
+baudrate=115200
+bootcmd=setenv bootargs root=/dev/mmcblk0p2 rootwait rw earlycon=uart8250,0x21c0500 console=ttyS0,115200 cma=256M video=1920x1080-32 at 60;mmcinfo;fatload mmc 0:1 ${dp_load} ${dp_file}; hdp load ${dp_load} ${dp_offset};fatload mmc 0:1 ${loadaddr} ${bootfile};fatload mmc 0:1 ${fdtaddr} ${fdtfile};booti ${loadaddr} - ${fdtaddr}
+bootdelay=3
+bootfile=Image
+fdtfile=fsl-ls1028a-rdb.dtb
+loadaddr=0xa0000000
+fdtaddr=0xb0000000
+dp_file=ls1028a-dp-fw.bin
+dp_load=0x90000000
+dp_offset=0x2000
+stderr=serial
+stdin=serial
+stdout=serial
diff --git a/configs/nxp_ls1028ardb-64b_defconfig b/configs/nxp_ls1028ardb-64b_defconfig
new file mode 100644
index 0000000000..cb0131a35c
--- /dev/null
+++ b/configs/nxp_ls1028ardb-64b_defconfig
@@ -0,0 +1,85 @@
+# Architecture
+BR2_aarch64=y
+BR2_cortex_a72=y
+
+# Filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+
+# Hostname and issue
+BR2_TARGET_GENERIC_HOSTNAME="LS1028ARDB"
+
+# toolchain
+BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
+BR2_TOOLCHAIN_BUILDROOT_LIBC="glibc"
+
+# Linux headers same as kernel
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
+
+# bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="ls1028ardb_tfa"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/u-boot"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="LSDK-19.09-update-311219"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_FORMAT_BIN=n
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-dtb.bin"
+BR2_PACKAGE_UBOOT_TOOLS_MKIMAGE=y
+BR2_TARGET_UBOOT_ENVIMAGE=y
+BR2_TARGET_UBOOT_ENVIMAGE_SOURCE="board/nxp/ls1028ardb/u-boot-environment-sd.txt"
+BR2_TARGET_UBOOT_ENVIMAGE_SIZE="0x2000"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/linux"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="LSDK-19.09-update-311219-V4.19"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.config"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-ls1028a-rdb"
+BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
+
+# Serial port config
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+
+# required tools to create the microSD image
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/nxp/ls1028ardb/post-image.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="$(LINUX_DIR) $(TOPDIR) $(UBOOT_DIR)"
+
+# busybox setting
+BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES="board/nxp/common/ls/busybox.config"
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+
+# packages for rcw
+BR2_PACKAGE_HOST_QORIQ_RCW=y
+BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE="sd"
+BR2_PACKAGE_HOST_QORIQ_RCW_BIN="ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.bin"
+
+#Display port firmware
+BR2_PACKAGE_QORIQ_CADENCE_DP_FIRMWARE=y
+
+#eudev support
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
+BR2_ROOTFS_OVERLAY="board/nxp/ls1028ardb/rootfs_overlay"
+
+# Arm-Trusted-Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE="u-boot-dtb.bin"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/atf"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="LSDK-19.09-update-311219"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1028ardb"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_sd.pbl"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS="pbl"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_DEPENDENCIES="host-qoriq-rcw"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="BOOT_MODE=sd RCW=$(BINARIES_DIR)/rcw_1300_sdboot.bin"
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v5 2/9] package/qoriq-rcw: move rcw into nxp and rename it
2020-02-07 8:38 ` [Buildroot] [PATCH v5 2/9] package/qoriq-rcw: move rcw into nxp and rename it Changming Huang
@ 2020-04-14 9:35 ` Heiko Thiery
2020-12-16 21:02 ` Yann E. MORIN
1 sibling, 0 replies; 20+ messages in thread
From: Heiko Thiery @ 2020-04-14 9:35 UTC (permalink / raw)
To: buildroot
Hi Jerry,
Am Fr., 7. Feb. 2020 um 09:41 Uhr schrieb Changming Huang <jerry.huang@nxp.com>:
>
> Move package/rcw into package/nxp,
> and rename it to qoriq-rcw.
>
> Signed-off-by: Changming Huang <jerry.huang@nxp.com>
> ---
> changes since v4:
> no changes.
>
> changes since v3:
> no changes.
>
> changes since v2:
> 1. change the package name to qoriq-rcw to keep consistent with imx-xxx.
> 2. add the handing in Config.in.legacy
>
> changes since v1:
> 1. new patch.
> 2. move rcw to sub-directory freescale-qoriq.
> 3. rename to fsl-qoriq-rcw.
> ---
> Config.in.legacy | 16 ++++++
> DEVELOPERS | 2 +-
> package/Config.in.host | 2 +-
> package/{rcw => nxp/qoriq-rcw}/Config.in.host | 6 +--
> .../rcw.hash => nxp/qoriq-rcw/qoriq-rcw.hash} | 2 +-
> package/nxp/qoriq-rcw/qoriq-rcw.mk | 50 +++++++++++++++++++
> package/rcw/rcw.mk | 50 -------------------
> 7 files changed, 72 insertions(+), 56 deletions(-)
> rename package/{rcw => nxp/qoriq-rcw}/Config.in.host (88%)
> rename package/{rcw/rcw.hash => nxp/qoriq-rcw/qoriq-rcw.hash} (82%)
> create mode 100644 package/nxp/qoriq-rcw/qoriq-rcw.mk
> delete mode 100644 package/rcw/rcw.mk
>
> diff --git a/Config.in.legacy b/Config.in.legacy
> index 3c6984d886..2473282e9d 100644
> --- a/Config.in.legacy
> +++ b/Config.in.legacy
> @@ -258,6 +258,22 @@ config BR2_BINUTILS_VERSION_2_30_X
> current default version (2.31 or later) has been selected
> instead.
>
> +config BR2_PACKAGE_HOST_RCW
> + bool "rcw package was removed"
> + select BR2_LEGACY
> + help
> + Because rcw package has been renamed to qoriq-rcw and moved
> + to "nxp", option BR2_PACKAGE_HOST_RCW is removed, the option
> + BR2_PACKAGE_HOST_QORIQ_RCW can be used for QorIQ platforms.
> +
> +config BR2_PACKAGE_HOST_RCW
> + bool "rcw package was removed"
> + select BR2_LEGACY
> + help
> + Because rcw package has been renamed to qoriq-rcw and moved
> + to "nxp", option BR2_PACKAGE_HOST_RCW is removed, the option
> + BR2_PACKAGE_HOST_QORIQ_RCW can be used for QorIQ platforms.
> +
here seems to be a mistake ... the BR2_PACKAGE_HOST_RCW section is
there twice :-/
--
Heiko
^ permalink raw reply [flat|nested] 20+ messages in thread
* [Buildroot] [PATCH v5 2/9] package/qoriq-rcw: move rcw into nxp and rename it
2020-02-07 8:38 ` [Buildroot] [PATCH v5 2/9] package/qoriq-rcw: move rcw into nxp and rename it Changming Huang
2020-04-14 9:35 ` Heiko Thiery
@ 2020-12-16 21:02 ` Yann E. MORIN
1 sibling, 0 replies; 20+ messages in thread
From: Yann E. MORIN @ 2020-12-16 21:02 UTC (permalink / raw)
To: buildroot
Changming, All,
On 2020-02-07 16:38 +0800, Changming Huang spake thusly:
> Move package/rcw into package/nxp,
> and rename it to qoriq-rcw.
>
> Signed-off-by: Changming Huang <jerry.huang@nxp.com>
I have eventually applied that patch to master, with a few changes:
- rebase on master
- incorporate changes by Michael
- don't move to an 'nxp' sub-directory
- reword the legacy entry; select the new package
- expand commit log to explain why we keep installing in
host/usr/share/rcw/ (thanks to Michael for prompting that)
Also, I've updated the commit log based on the recent patch from
Micheal:
https://patchwork.ozlabs.org/project/buildroot/patch/20201215081736.4791-1-michael at walle.cc/
I'm going to look further into the rest of the series in the coming
days.
Sorry for the huge delay in handling that...
Regards,
Yann E. MORIN.
> ---
> changes since v4:
> no changes.
>
> changes since v3:
> no changes.
>
> changes since v2:
> 1. change the package name to qoriq-rcw to keep consistent with imx-xxx.
> 2. add the handing in Config.in.legacy
>
> changes since v1:
> 1. new patch.
> 2. move rcw to sub-directory freescale-qoriq.
> 3. rename to fsl-qoriq-rcw.
> ---
> Config.in.legacy | 16 ++++++
> DEVELOPERS | 2 +-
> package/Config.in.host | 2 +-
> package/{rcw => nxp/qoriq-rcw}/Config.in.host | 6 +--
> .../rcw.hash => nxp/qoriq-rcw/qoriq-rcw.hash} | 2 +-
> package/nxp/qoriq-rcw/qoriq-rcw.mk | 50 +++++++++++++++++++
> package/rcw/rcw.mk | 50 -------------------
> 7 files changed, 72 insertions(+), 56 deletions(-)
> rename package/{rcw => nxp/qoriq-rcw}/Config.in.host (88%)
> rename package/{rcw/rcw.hash => nxp/qoriq-rcw/qoriq-rcw.hash} (82%)
> create mode 100644 package/nxp/qoriq-rcw/qoriq-rcw.mk
> delete mode 100644 package/rcw/rcw.mk
>
> diff --git a/Config.in.legacy b/Config.in.legacy
> index 3c6984d886..2473282e9d 100644
> --- a/Config.in.legacy
> +++ b/Config.in.legacy
> @@ -258,6 +258,22 @@ config BR2_BINUTILS_VERSION_2_30_X
> current default version (2.31 or later) has been selected
> instead.
>
> +config BR2_PACKAGE_HOST_RCW
> + bool "rcw package was removed"
> + select BR2_LEGACY
> + help
> + Because rcw package has been renamed to qoriq-rcw and moved
> + to "nxp", option BR2_PACKAGE_HOST_RCW is removed, the option
> + BR2_PACKAGE_HOST_QORIQ_RCW can be used for QorIQ platforms.
> +
> +config BR2_PACKAGE_HOST_RCW
> + bool "rcw package was removed"
> + select BR2_LEGACY
> + help
> + Because rcw package has been renamed to qoriq-rcw and moved
> + to "nxp", option BR2_PACKAGE_HOST_RCW is removed, the option
> + BR2_PACKAGE_HOST_QORIQ_RCW can be used for QorIQ platforms.
> +
> config BR2_PACKAGE_RPI_USERLAND_START_VCFILED
> bool "rpi-userland start vcfiled was removed"
> select BR2_LEGACY
> diff --git a/DEVELOPERS b/DEVELOPERS
> index d8ea23e0b3..e555b9773b 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -1654,6 +1654,7 @@ F: package/mrouted/
> F: package/mtd/
> F: package/mtools/
> F: package/nginx-upload/
> +F: package/nxp/qoriq-rcw/
> F: package/omniorb/
> F: package/openresolv/
> F: package/paxtest/
> @@ -1674,7 +1675,6 @@ F: package/python-pyrex/
> F: package/python-tinyrpc/
> F: package/python-txdbus/
> F: package/raptor/
> -F: package/rcw/
> F: package/rng-tools/
> F: package/rsyslog/
> F: package/setools/
> diff --git a/package/Config.in.host b/package/Config.in.host
> index 62e860d7c3..55f1e87f89 100644
> --- a/package/Config.in.host
> +++ b/package/Config.in.host
> @@ -45,6 +45,7 @@ menu "Host utilities"
> source "package/mtd/Config.in.host"
> source "package/mtools/Config.in.host"
> source "package/mxsldr/Config.in.host"
> + source "package/nxp/qoriq-rcw/Config.in.host"
> source "package/omap-u-boot-utils/Config.in.host"
> source "package/openocd/Config.in.host"
> source "package/opkg-utils/Config.in.host"
> @@ -62,7 +63,6 @@ menu "Host utilities"
> source "package/qemu/Config.in.host"
> source "package/raspberrypi-usbboot/Config.in.host"
> source "package/rauc/Config.in.host"
> - source "package/rcw/Config.in.host"
> source "package/rustc/Config.in.host"
> source "package/s6-rc/Config.in.host"
> source "package/sam-ba/Config.in.host"
> diff --git a/package/rcw/Config.in.host b/package/nxp/qoriq-rcw/Config.in.host
> similarity index 88%
> rename from package/rcw/Config.in.host
> rename to package/nxp/qoriq-rcw/Config.in.host
> index a9253958d9..8f78a40908 100644
> --- a/package/rcw/Config.in.host
> +++ b/package/nxp/qoriq-rcw/Config.in.host
> @@ -1,4 +1,4 @@
> -config BR2_PACKAGE_HOST_RCW
> +config BR2_PACKAGE_HOST_QORIQ_RCW
> bool "host rcw"
> help
> This package provides an reset configuration word(RCW)
> @@ -11,9 +11,9 @@ config BR2_PACKAGE_HOST_RCW
>
> https://source.codeaurora.org/external/qoriq/qoriq-components/rcw/
>
> -if BR2_PACKAGE_HOST_RCW
> +if BR2_PACKAGE_HOST_QORIQ_RCW
>
> -config BR2_PACKAGE_HOST_RCW_CUSTOM_PATH
> +config BR2_PACKAGE_HOST_QORIQ_RCW_CUSTOM_PATH
> string "RCW Source file paths"
> help
> Space-separated list of .rcw and .rcwi files, that will be
> diff --git a/package/rcw/rcw.hash b/package/nxp/qoriq-rcw/qoriq-rcw.hash
> similarity index 82%
> rename from package/rcw/rcw.hash
> rename to package/nxp/qoriq-rcw/qoriq-rcw.hash
> index 7de1ec659a..e9708d960d 100644
> --- a/package/rcw/rcw.hash
> +++ b/package/nxp/qoriq-rcw/qoriq-rcw.hash
> @@ -1,3 +1,3 @@
> # Locally calculated
> -sha256 1421ada9fec10b12ff21cd9ad82f0a835b191cb2dde80f03547764574b1346c3 rcw-LSDK-18.12.tar.gz
> +sha256 1421ada9fec10b12ff21cd9ad82f0a835b191cb2dde80f03547764574b1346c3 qoriq-rcw-LSDK-18.12.tar.gz
> sha256 a531b3146425e592db17a51ff39c4801cb01fb4055ffdaada0572decc0655bcd LICENSE
> diff --git a/package/nxp/qoriq-rcw/qoriq-rcw.mk b/package/nxp/qoriq-rcw/qoriq-rcw.mk
> new file mode 100644
> index 0000000000..3308f20192
> --- /dev/null
> +++ b/package/nxp/qoriq-rcw/qoriq-rcw.mk
> @@ -0,0 +1,50 @@
> +################################################################################
> +#
> +# qoriq-rcw
> +#
> +################################################################################
> +
> +QORIQ_RCW_VERSION = LSDK-18.12
> +QORIQ_RCW_SITE = https://source.codeaurora.org/external/qoriq/qoriq-components/rcw
> +QORIQ_RCW_SITE_METHOD = git
> +QORIQ_RCW_LICENSE = BSD-3-Clause
> +QORIQ_RCW_LICENSE_FILES = LICENSE
> +
> +QORIQ_RCW_FILES = $(call qstrip,$(BR2_PACKAGE_HOST_QORIQ_RCW_CUSTOM_PATH))
> +
> +ifneq ($(QORIQ_RCW_FILES),)
> +# Get the name of the custom rcw file from the custom list
> +QORIQ_RCW_PROJECT = $(notdir $(filter %.rcw,$(QORIQ_RCW_FILES)))
> +
> +# Error if there are no or more than one .rcw file
> +ifeq ($(BR_BUILDING),y)
> +ifneq ($(words $(QORIQ_RCW_PROJECT)),1)
> +$(error BR2_PACKAGE_HOST_QORIQ_RCW_CUSTOM_PATH must have exactly one .rcw file)
> +endif
> +endif
> +
> +define HOST_QORIQ_RCW_ADD_CUSTOM_RCW_FILES
> + mkdir -p $(@D)/custom_board/rcw
> + cp -f $(filter-out %.rcw,$(QORIQ_RCW_FILES)) $(@D)/custom_board
> + cp -f $(filter %.rcw,$(QORIQ_RCW_FILES)) $(@D)/custom_board/rcw
> +endef
> +HOST_QORIQ_RCW_POST_PATCH_HOOKS += HOST_QORIQ_RCW_ADD_CUSTOM_RCW_FILES
> +
> +define HOST_QORIQ_RCW_BUILD_CMDS
> + python $(@D)/rcw.py -i $(@D)/custom_board/rcw/$(QORIQ_RCW_PROJECT) -I $(@D)/custom_board -o $(@D)/PBL.bin
> +endef
> +
> +define HOST_QORIQ_RCW_INSTALL_DELIVERY_FILE
> + $(INSTALL) -D -m 0644 $(@D)/PBL.bin $(BINARIES_DIR)/PBL.bin
> +endef
> +endif
> +
> +# Copy source files and script into $(HOST_DIR)/share/rcw/ so a developer
> +# could use a post image or SDK to build/install PBL files.
> +define HOST_QORIQ_RCW_INSTALL_CMDS
> + mkdir -p $(HOST_DIR)/share/rcw
> + cp -a $(@D)/* $(HOST_DIR)/share/rcw
> + $(HOST_QORIQ_RCW_INSTALL_DELIVERY_FILE)
> +endef
> +
> +$(eval $(host-generic-package))
> diff --git a/package/rcw/rcw.mk b/package/rcw/rcw.mk
> deleted file mode 100644
> index 36d2da61b5..0000000000
> --- a/package/rcw/rcw.mk
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -################################################################################
> -#
> -# rcw
> -#
> -################################################################################
> -
> -RCW_VERSION = LSDK-18.12
> -RCW_SITE = https://source.codeaurora.org/external/qoriq/qoriq-components/rcw
> -RCW_SITE_METHOD = git
> -RCW_LICENSE = BSD-3-Clause
> -RCW_LICENSE_FILES = LICENSE
> -
> -RCW_FILES = $(call qstrip,$(BR2_PACKAGE_HOST_RCW_CUSTOM_PATH))
> -
> -ifneq ($(RCW_FILES),)
> -# Get the name of the custom rcw file from the custom list
> -RCW_PROJECT = $(notdir $(filter %.rcw,$(RCW_FILES)))
> -
> -# Error if there are no or more than one .rcw file
> -ifeq ($(BR_BUILDING),y)
> -ifneq ($(words $(RCW_PROJECT)),1)
> -$(error BR2_PACKAGE_HOST_RCW_CUSTOM_PATH must have exactly one .rcw file)
> -endif
> -endif
> -
> -define HOST_RCW_ADD_CUSTOM_RCW_FILES
> - mkdir -p $(@D)/custom_board/rcw
> - cp -f $(filter-out %.rcw,$(RCW_FILES)) $(@D)/custom_board
> - cp -f $(filter %.rcw,$(RCW_FILES)) $(@D)/custom_board/rcw
> -endef
> -HOST_RCW_POST_PATCH_HOOKS += HOST_RCW_ADD_CUSTOM_RCW_FILES
> -
> -define HOST_RCW_BUILD_CMDS
> - python $(@D)/rcw.py -i $(@D)/custom_board/rcw/$(RCW_PROJECT) -I $(@D)/custom_board -o $(@D)/PBL.bin
> -endef
> -
> -define HOST_RCW_INSTALL_DELIVERY_FILE
> - $(INSTALL) -D -m 0644 $(@D)/PBL.bin $(BINARIES_DIR)/PBL.bin
> -endef
> -endif
> -
> -# Copy source files and script into $(HOST_DIR)/share/rcw/ so a developer
> -# could use a post image or SDK to build/install PBL files.
> -define HOST_RCW_INSTALL_CMDS
> - mkdir -p $(HOST_DIR)/share/rcw
> - cp -a $(@D)/* $(HOST_DIR)/share/rcw
> - $(HOST_RCW_INSTALL_DELIVERY_FILE)
> -endef
> -
> -$(eval $(host-generic-package))
> --
> 2.17.1
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [Buildroot] [PATCH v5 1/9] package/nxp: new package directory
2020-02-07 8:38 [Buildroot] [PATCH v5 1/9] package/nxp: new package directory Changming Huang
` (7 preceding siblings ...)
2020-02-07 8:38 ` [Buildroot] [PATCH v5 9/9] board/nxp/ls1028ardb: new board Changming Huang
@ 2022-01-06 14:45 ` Arnout Vandecappelle
2022-01-06 15:00 ` Michael Walle
8 siblings, 1 reply; 20+ messages in thread
From: Arnout Vandecappelle @ 2022-01-06 14:45 UTC (permalink / raw)
To: Changming Huang, buildroot
Cc: geomatsi, Chris Dimich, michael, thomas.petazzoni, heiko.thiery,
Michael Trimarchi, matthew.weber
Hi Changming,
I finally started picking up this series after two years. Unfortunately, I
have a lot of requests for changes still.
On 07/02/2020 09:38, Changming Huang wrote:
> The "nxp" directory is intended to contain all NXP
> QorIQ (including PowerPC and LayerScape serial) related packages,
> together with their download site and version info.
We try to avoid subdirectories in package/; we only add them in case there is
some common functionality that needs to be factored out, like for e.g. qt5.
In this series, the only commonality that I found is the binary extraction,
but it ends up to be used only by qoriq-cadence-dp-firmware. That's not worth it
IMHO.
Therefore, I marked this patch and rejected.
Note that it would make sense to do this if we would also move the
freescale-imx stuff into the same directory (freescale is anyway nxp now so it
should be OK to do that).
> Signed-off-by: Changming Huang <jerry.huang@nxp.com>
> ---
> changes since v4:
> no changes.
>
> changes since v3:
> no changes.
>
> changes since v2:
> 1. change the sub-direcotry to "nxp".
> 2. add helper.mk macro to extract compressed file.
>
> changes since v1:
> no changes.
> ---
> package/Config.in | 1 +
> package/nxp/Config.in | 4 ++++
> package/nxp/helper.mk | 32 ++++++++++++++++++++++++++++++++
> 3 files changed, 37 insertions(+)
> create mode 100644 package/nxp/Config.in
> create mode 100644 package/nxp/helper.mk
>
> diff --git a/package/Config.in b/package/Config.in
> index bad4f9cba6..f9827769a2 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -497,6 +497,7 @@ endmenu
> source "package/nvidia-driver/Config.in"
> source "package/nvidia-tegra23/Config.in"
> source "package/nvme/Config.in"
> + source "package/nxp/Config.in"
> source "package/ofono/Config.in"
> source "package/on2-8170-modules/Config.in"
> source "package/open2300/Config.in"
> diff --git a/package/nxp/Config.in b/package/nxp/Config.in
> new file mode 100644
> index 0000000000..575542c7ab
> --- /dev/null
> +++ b/package/nxp/Config.in
> @@ -0,0 +1,4 @@
> +menu "NXP QorIQ libraries"
> + depends on BR2_aarch64 || BR2_arm || BR2_powerpc64 || BR2_powerpc
> +
> +endmenu
> diff --git a/package/nxp/helper.mk b/package/nxp/helper.mk
> new file mode 100644
> index 0000000000..79e4236249
> --- /dev/null
> +++ b/package/nxp/helper.mk
The .mk file should have the same name as the directory, so nxp.mk.
Regards,
Arnout
> @@ -0,0 +1,32 @@
> +################################################################################
> +#
> +# helper
> +#
> +################################################################################
> +
> +# Helper for self-extracting binaries distributed by NXP.
> +#
> +# The --force option makes sure it doesn't fail if the source
> +# directory already exists. The --auto-accept skips the license check,
> +# as it is not needed in Buildroot because we have legal-info. Since
> +# there's a EULA in the binary file, we extract it in this macro, and
> +# it should therefore be added to the LICENSE_FILES variable of
> +# packages using this macro. Also, remember to set REDISTRIBUTE to
> +# "NO". Indeed, this is a legal minefield: the EULA specifies that the
> +# Board Support Package includes software and hardware (sic!) for
> +# which a separate license is needed...
> +#
> +# $(1): full path to the archive file
> +#
> +define NXP_EXTRACT_HELPER
> + awk 'BEGIN { start = 0; } \
> + /^EOEULA/ { start = 0; } \
> + { if (start) print; } \
> + /<<EOEULA/ { start = 1; }' \
> + $(1) > $(@D)/EULA
> + cd $(@D) && sh $(1) --force --auto-accept
> + find $(@D)/$(basename $(notdir $(1))) -mindepth 1 -maxdepth 1 -exec mv {} $(@D) \;
> + rmdir $(@D)/$(basename $(notdir $(1)))
> +endef
> +
> +include $(sort $(wildcard package/nxp/*/*.mk))
>
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [Buildroot] [PATCH v5 4/9] package/qoriq-rcw: add target rcw binary support
2020-02-07 8:38 ` [Buildroot] [PATCH v5 4/9] package/qoriq-rcw: add target rcw binary support Changming Huang
@ 2022-01-06 14:48 ` Arnout Vandecappelle
0 siblings, 0 replies; 20+ messages in thread
From: Arnout Vandecappelle @ 2022-01-06 14:48 UTC (permalink / raw)
To: Changming Huang, buildroot
Cc: michael, matthew.weber, thomas.petazzoni, geomatsi, heiko.thiery
On 07/02/2020 09:38, Changming Huang wrote:
> From: Jerry Huang <jerry.huang@nxp.com>
>
> For NXP QorIQ (PowerPC and Layerscape) platform,
> we need to specify the RCW file and build it to binary.
>
> Introduce BR2_PACKAGE_HOST_QORIQ_RCW_BIN to specify the RCW binary file.
It took me some time to understand: this is actually simply about an in-tree
RCW source, rather than a custom one. So I heavily modified this patch:
- rename the option to _RCW_INTREE;
- update commit message, documentation, and internal variables
accordingly;
- reorganise condition tree so it becomes a little simpler;
- add patsubst so the source can be specified as either %.rcw or %.bin;
- always install it as PBL.bin, to be consistent with the custom
option.
Note that that last one (PBL.bin) also affects post-image scripts that use it.
But I didn't get down to the ls1028ardb defconfig.
Regards,
Arnout
>
> Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
> ---
> changes since v4:
> no changes.
>
> changes since v3:
> no changes.
>
> changes since v2:
> 1. modify the patch descrition.
> 2. more detail for BR2_PACKAGE_HOST_QORIQ_RCW_BIN.
> 3. remove two options not used in this patch.
> 4. add the condition detection in makefile for QorIQ RCW.
>
> changes since v1:
> 1. add option BR2_PACKAGE_HOST_RCW_ATF for ATF.
> ---
> package/nxp/qoriq-rcw/Config.in.host | 12 ++++++++++++
> package/nxp/qoriq-rcw/qoriq-rcw.mk | 15 +++++++++++++++
> 2 files changed, 27 insertions(+)
>
> diff --git a/package/nxp/qoriq-rcw/Config.in.host b/package/nxp/qoriq-rcw/Config.in.host
> index 8f78a40908..9bf55894e8 100644
> --- a/package/nxp/qoriq-rcw/Config.in.host
> +++ b/package/nxp/qoriq-rcw/Config.in.host
> @@ -25,4 +25,16 @@ config BR2_PACKAGE_HOST_QORIQ_RCW_CUSTOM_PATH
> included for use in the SDK or with post scripts but no
> RCW binary will not be generated.
>
> +config BR2_PACKAGE_HOST_QORIQ_RCW_BIN
> + string "Custom RCW"
> + depends on !BR2_PACKAGE_HOST_QORIQ_RCW_CUSTOM_PATH
> + help
> + This option is used to specify the RCW binary file for board.
> + which is composed with platform/serdes_value/rcw_file, platform
> + is the platform name, serdes_value is the setting of the Serdes,
> + rcw_file is the file name of RCW, for example:
> + "ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.bin"
> +
> + If this option is empty, no rcw file is used.
> +
> endif
> diff --git a/package/nxp/qoriq-rcw/qoriq-rcw.mk b/package/nxp/qoriq-rcw/qoriq-rcw.mk
> index 7a0494adc6..bbd085f277 100644
> --- a/package/nxp/qoriq-rcw/qoriq-rcw.mk
> +++ b/package/nxp/qoriq-rcw/qoriq-rcw.mk
> @@ -37,6 +37,21 @@ endef
> define HOST_QORIQ_RCW_INSTALL_DELIVERY_FILE
> $(INSTALL) -D -m 0644 $(@D)/PBL.bin $(BINARIES_DIR)/PBL.bin
> endef
> +else
> +QORIQ_RCW_PATH_FILE_BIN = $(call qstrip,$(BR2_PACKAGE_HOST_QORIQ_RCW_BIN))
> +
> +ifneq ($(QORIQ_RCW_PATH_FILE_BIN),)
> +QORIQ_RCW_PLATFORM = $(firstword $(subst /, ,$(QORIQ_RCW_PATH_FILE_BIN)))
> +QORIQ_RCW_FILE_BIN = $(lastword $(subst /, ,$(QORIQ_RCW_PATH_FILE_BIN)))
> +
> +define HOST_QORIQ_RCW_BUILD_CMDS
> + $(MAKE) -C $(@D)/$(QORIQ_RCW_PLATFORM)
> +endef
> +
> +define HOST_QORIQ_RCW_INSTALL_DELIVERY_FILE
> + $(INSTALL) -D -m 0644 $(@D)/$(QORIQ_RCW_PATH_FILE_BIN) $(BINARIES_DIR)/$(QORIQ_RCW_FILE_BIN)
> +endef
> +endif
> endif
>
> # Copy source files and script into $(HOST_DIR)/share/rcw/ so a developer
>
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [Buildroot] [PATCH v5 1/9] package/nxp: new package directory
2022-01-06 14:45 ` [Buildroot] [PATCH v5 1/9] package/nxp: new package directory Arnout Vandecappelle
@ 2022-01-06 15:00 ` Michael Walle
0 siblings, 0 replies; 20+ messages in thread
From: Michael Walle @ 2022-01-06 15:00 UTC (permalink / raw)
To: Arnout Vandecappelle
Cc: geomatsi, Chris Dimich, Changming Huang, thomas.petazzoni,
buildroot, heiko.thiery, Michael Trimarchi, matthew.weber
Am 2022-01-06 15:45, schrieb Arnout Vandecappelle:
> In this series, the only commonality that I found is the binary
> extraction, but it ends up to be used only by
> qoriq-cadence-dp-firmware. That's not worth it IMHO.
mh? all the imx stuff is using this method.
>
> Therefore, I marked this patch and rejected.
>
> Note that it would make sense to do this if we would also move the
> freescale-imx stuff into the same directory (freescale is anyway nxp
> now so it should be OK to do that).
ah. yes. that was the idea back then IMHO.
-michael
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [Buildroot] [PATCH v5 5/9] boot/arm-trusted-firmware: allow additional make dependencies
2020-02-07 8:38 ` [Buildroot] [PATCH v5 5/9] boot/arm-trusted-firmware: allow additional make dependencies Changming Huang
@ 2022-01-06 15:05 ` Arnout Vandecappelle
0 siblings, 0 replies; 20+ messages in thread
From: Arnout Vandecappelle @ 2022-01-06 15:05 UTC (permalink / raw)
To: Changming Huang, buildroot
Cc: thomas.petazzoni, heiko.thiery, michael, geomatsi, matthew.weber
On 07/02/2020 09:38, Changming Huang wrote:
> Allow specifying additional build dependencies for ATF.
>
> This might be more useful when using a custom git repository.
>
> For example, when using with the ATF repository from NXP QorIQ,
> the qoriq-rcw is used to build the pbl binary image.
This is not a very user-friendly way to do it. Since RCW support is something
that is in upstream ATF, I think it makes a whole lot more sense to make it an
explicit option. Something like:
config BR2_TARGET_ARM_TRUSTED_FIRMWARE_RCW
bool "Include RCW"
depends on BR2_HOST_QORIQ_RCW
help
Include the RCW in BL2.
That way you can also add the RCW=$(BINARIES_DIR)/PBL.bin automatically to the
variables (and this is an advantage of always calling it PBL.bin :-)
I've marked this patch as Changes Requested.
Regards,
Arnout
>
> Signed-off-by: Changming Huang <jerry.huang@nxp.com>
> ---
> changes since v4:
> 1. remove the option BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS.
> 2. modify the description.
>
> changes since v3:
> no changes.
>
> changes since v2:
> 1. introduce option BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS.
> 2. introduce option BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_DEPENDENCIES.
> 3. rewrite the makefile with these two options
>
> changes since v1:
> 1. Use option BR2_PACKAGE_HOST_RCW_ATF as the condition for RCW used by ATF.
> ---
> boot/arm-trusted-firmware/Config.in | 5 +++++
> boot/arm-trusted-firmware/arm-trusted-firmware.mk | 3 +++
> 2 files changed, 8 insertions(+)
>
> diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in
> index 373591d497..c9b74064d7 100644
> --- a/boot/arm-trusted-firmware/Config.in
> +++ b/boot/arm-trusted-firmware/Config.in
> @@ -142,6 +142,11 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS
> E.G. When using the QorIQ custom ATF repository from NXP,
> the target 'pbl' can be used to build the pbl binary.
>
> +config BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_DEPENDENCIES
> + string "Additional AFT dependencies"
> + help
> + Additional dependencies for ATF build, E.G. "host-qoriq-rcw"
> +
> config BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES
> string "Additional ATF build variables"
> help
> diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
> index bf1ac46cf6..43be2fef99 100644
> --- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk
> +++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
> @@ -92,6 +92,9 @@ endif
>
> ARM_TRUSTED_FIRMWARE_MAKE_TARGETS = all
>
> +ARM_TRUSTED_FIRMWARE_DEPENDENCIES += \
> + $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_DEPENDENCIES))
> +
> ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP),y)
> ARM_TRUSTED_FIRMWARE_MAKE_TARGETS += fip
> ARM_TRUSTED_FIRMWARE_DEPENDENCIES += host-openssl
>
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [Buildroot] [PATCH v5 6/9] package/qoriq-cadence-dp-firmware: new package
2020-02-07 8:38 ` [Buildroot] [PATCH v5 6/9] package/qoriq-cadence-dp-firmware: new package Changming Huang
@ 2022-01-06 15:14 ` Michael Walle
2022-01-06 15:19 ` Arnout Vandecappelle
1 sibling, 0 replies; 20+ messages in thread
From: Michael Walle @ 2022-01-06 15:14 UTC (permalink / raw)
To: Changming Huang
Cc: buildroot, heiko.thiery, geomatsi, thomas.petazzoni, matthew.weber
Am 2020-02-07 09:38, schrieb Changming Huang:
> From: Jerry Huang <jerry.huang@nxp.com>
>
> This package provides the firmware for LS1028ARDB DP (display port).
>
> Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
Arnout, please note that upstream uboot and linux won't use
this firmware. So this can be dropped.
Proper support for the cadence phy will likely be using
the request_firmware() method in linux (and i guess binaries
will then end up in the linux-firmware package).
-michael
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [Buildroot] [PATCH v5 6/9] package/qoriq-cadence-dp-firmware: new package
2020-02-07 8:38 ` [Buildroot] [PATCH v5 6/9] package/qoriq-cadence-dp-firmware: new package Changming Huang
2022-01-06 15:14 ` Michael Walle
@ 2022-01-06 15:19 ` Arnout Vandecappelle
1 sibling, 0 replies; 20+ messages in thread
From: Arnout Vandecappelle @ 2022-01-06 15:19 UTC (permalink / raw)
To: Changming Huang, buildroot
Cc: michael, matthew.weber, thomas.petazzoni, geomatsi, heiko.thiery
On 07/02/2020 09:38, Changming Huang wrote:
> From: Jerry Huang <jerry.huang@nxp.com>
>
> This package provides the firmware for LS1028ARDB DP (display port).
>
> Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
Applied to master, with a few changes:
- move out of nxp directory;
- add extraction helper;
- set REDISTRIBUTE to NO.
Regards,
Arnout
> ---
> changes since v4:
> 1. remove the variable NXP_QORIQ_SITE.
> 2. use the url for qoriq-cadence-dp-firmware site directly.
>
> changes since v3:
> no changes.
>
> changes since v2:
> 1. change the package name to qoriq-cadence-dp-firmware.
> 2. add the hash of COPYING.
> 3. modify makefile with new option.
> 4. update DEVELOPERS with alphabetic ordering
>
> changes since v1:
> 1. rename the package to fsl-qoriq-cadence-dp-fw.
> 2. update DEVELOPERS.
> 3. add the hash of package.
> 4. modify the context fo config file to package name.
> 5. re-write the makefile according to rule of buildroot.
> 6. add the license message in makefile.
> ---
> DEVELOPERS | 3 +++
> package/nxp/Config.in | 2 ++
> .../nxp/qoriq-cadence-dp-firmware/Config.in | 4 ++++
> .../qoriq-cadence-dp-firmware.hash | 3 +++
> .../qoriq-cadence-dp-firmware.mk | 23 +++++++++++++++++++
> 5 files changed, 35 insertions(+)
> create mode 100644 package/nxp/qoriq-cadence-dp-firmware/Config.in
> create mode 100644 package/nxp/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.hash
> create mode 100644 package/nxp/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.mk
>
> diff --git a/DEVELOPERS b/DEVELOPERS
> index e555b9773b..ffb07d67ea 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -529,6 +529,9 @@ F: configs/nanopi_m1_plus_defconfig
> F: configs/olimex_a13_olinuxino_defconfig
> F: configs/orangepi_plus_defconfig
>
> +N: Changming Huang <jerry.huang@nxp.com>
> +F: package/nxp/qoriq-cadence-dp-firmware/
> +
> N: Chris Packham <judge.packham@gmail.com>
> F: package/gstreamer1/gst1-shark/
> F: package/micropython/
> diff --git a/package/nxp/Config.in b/package/nxp/Config.in
> index 575542c7ab..855d62700b 100644
> --- a/package/nxp/Config.in
> +++ b/package/nxp/Config.in
> @@ -1,4 +1,6 @@
> menu "NXP QorIQ libraries"
> depends on BR2_aarch64 || BR2_arm || BR2_powerpc64 || BR2_powerpc
>
> +source "package/nxp/qoriq-cadence-dp-firmware/Config.in"
> +
> endmenu
> diff --git a/package/nxp/qoriq-cadence-dp-firmware/Config.in b/package/nxp/qoriq-cadence-dp-firmware/Config.in
> new file mode 100644
> index 0000000000..3f494bd3a3
> --- /dev/null
> +++ b/package/nxp/qoriq-cadence-dp-firmware/Config.in
> @@ -0,0 +1,4 @@
> +config BR2_PACKAGE_QORIQ_CADENCE_DP_FIRMWARE
> + bool "qoriq-cadence-dp-firmware"
> + help
> + NXP QorIQ cadence DP firmware, a resident EL3 firmware.
> diff --git a/package/nxp/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.hash b/package/nxp/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.hash
> new file mode 100644
> index 0000000000..89aaf1d71b
> --- /dev/null
> +++ b/package/nxp/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.hash
> @@ -0,0 +1,3 @@
> +# Locally calculated
> +sha256 5871c5717be32f14a59624d5699d405e8ce9ae2e9c9ef86fd16e13d264a40e58 firmware-cadence-lsdk1909.bin
> +sha256 d55f024af2bfff714b90de596f6d0399124b999e8c18a86b13a3b507bae6f561 COPYING
> diff --git a/package/nxp/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.mk b/package/nxp/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.mk
> new file mode 100644
> index 0000000000..5c29602574
> --- /dev/null
> +++ b/package/nxp/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.mk
> @@ -0,0 +1,23 @@
> +################################################################################
> +#
> +# qoriq-cadence-dp-firmware
> +#
> +################################################################################
> +
> +QORIQ_CADENCE_DP_FIRMWARE_VERSION = lsdk1909
> +QORIQ_CADENCE_DP_FIRMWARE_SITE = http://www.nxp.com/lgfiles/sdk/$(QORIQ_CADENCE_DP_FIRMWARE_VERSION)
> +QORIQ_CADENCE_DP_FIRMWARE_SOURCE = firmware-cadence-$(QORIQ_CADENCE_DP_FIRMWARE_VERSION).bin
> +QORIQ_CADENCE_DP_FIRMWARE_LICENSE = NXP-Binary-EULA
> +QORIQ_CADENCE_DP_FIRMWARE_LICENSE_FILES = COPYING
> +QORIQ_CADENCE_DP_FIRMWARE_INSTALL_IMAGES = YES
> +QORIQ_CADENCE_DP_FIRMWARE_INSTALL_TARGET = NO
> +
> +define QORIQ_CADENCE_DP_FIRMWARE_EXTRACT_CMDS
> + $(call NXP_EXTRACT_HELPER,$(QORIQ_CADENCE_DP_FIRMWARE_DL_DIR)/$(QORIQ_CADENCE_DP_FIRMWARE_SOURCE))
> +endef
> +
> +define QORIQ_CADENCE_DP_FIRMWARE_INSTALL_IMAGES_CMDS
> + $(INSTALL) -D -m 0644 $(@D)/dp/ls1028a-dp-fw.bin $(BINARIES_DIR)/ls1028a-dp-fw.bin
> +endef
> +
> +$(eval $(generic-package))
>
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [Buildroot] [PATCH v5 7/9] package/qoriq-rcw:Enable IIC5_PMUX and CLK_OUT_PMUX for GPIO
2020-02-07 8:38 ` [Buildroot] [PATCH v5 7/9] package/qoriq-rcw:Enable IIC5_PMUX and CLK_OUT_PMUX for GPIO Changming Huang
@ 2022-01-06 15:54 ` Arnout Vandecappelle
0 siblings, 0 replies; 20+ messages in thread
From: Arnout Vandecappelle @ 2022-01-06 15:54 UTC (permalink / raw)
To: Changming Huang, buildroot
Cc: michael, matthew.weber, thomas.petazzoni, geomatsi, heiko.thiery
On 07/02/2020 09:38, Changming Huang wrote:
> From: Jerry Huang <jerry.huang@nxp.com>
>
> Because GPIO is used as interrupt for eNETC PHY and Micro-bus,
> IIC5_PMUX and CLK_OUT_PMUX are enabled for GPIO.
This sounds like something really board specific, which should be applied
upstream first and lacking that, it's IMHO better to use BR2_GLOBAL_PATCH_DIR
and do it in the board-specific defconfig instead of patching qoriq-rcw package.
In addition, qoriq-rcw has been updated so the patch maybe doesn't apply any more.
Therefore, I marked this one as Rejected.
Regards,
Arnout
>
> Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
> ---
> changes since v4:
> no changes.
>
> changes since v3:
> no changes.
>
> changes since v2:
> no changes.
>
> changes since v1:
> 1. change to unconditional for these two patches.
> ---
> ...b-Enable-IIC5_PMUX-for-GPIO-function.patch | 42 +++++++++++++++++++
> ...nable-CLK_OUT_PMUX-for-GPIO-function.patch | 40 ++++++++++++++++++
> 2 files changed, 82 insertions(+)
> create mode 100644 package/nxp/qoriq-rcw/0001-ls1028ardb-Enable-IIC5_PMUX-for-GPIO-function.patch
> create mode 100644 package/nxp/qoriq-rcw/0002-ls1028ardb-Enable-CLK_OUT_PMUX-for-GPIO-function.patch
>
> diff --git a/package/nxp/qoriq-rcw/0001-ls1028ardb-Enable-IIC5_PMUX-for-GPIO-function.patch b/package/nxp/qoriq-rcw/0001-ls1028ardb-Enable-IIC5_PMUX-for-GPIO-function.patch
> new file mode 100644
> index 0000000000..21c6c84cbd
> --- /dev/null
> +++ b/package/nxp/qoriq-rcw/0001-ls1028ardb-Enable-IIC5_PMUX-for-GPIO-function.patch
> @@ -0,0 +1,42 @@
> +From 33b403cee1fa215927bc65dc14baf35a2fdbe7b3 Mon Sep 17 00:00:00 2001
> +From: Jerry Huang <jerry.huang@nxp.com>
> +Date: Thu, 19 Sep 2019 12:12:20 +0800
> +Subject: [PATCH 1/2] ls1028ardb: Enable IIC5_PMUX for GPIO function
> +
> +Set IIC5_PMUX = 1 to enable GPIO function.
> +
> +Signed-off-by: Jianchao Wang <jianchao.wang@nxp.com>
> +Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
> +---
> + ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw | 2 +-
> + ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw | 2 +-
> + 2 files changed, 2 insertions(+), 2 deletions(-)
> +
> +diff --git a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
> +index b46ea2e..5466a63 100644
> +--- a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
> ++++ b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
> +@@ -26,7 +26,7 @@ SYSCLK_FREQ=600
> + IIC2_PMUX=6
> + IIC3_PMUX=2
> + IIC4_PMUX=2
> +-IIC5_PMUX=2
> ++IIC5_PMUX=1
> + IIC6_PMUX=2
> + CLK_OUT_PMUX=2
> + EC1_SAI4_5_PMUX=5
> +diff --git a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
> +index 04e2208..1908d8c 100644
> +--- a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
> ++++ b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
> +@@ -26,7 +26,7 @@ SYSCLK_FREQ=600
> + IIC2_PMUX=6
> + IIC3_PMUX=2
> + IIC4_PMUX=2
> +-IIC5_PMUX=2
> ++IIC5_PMUX=1
> + IIC6_PMUX=3
> + CLK_OUT_PMUX=2
> + EC1_SAI4_5_PMUX=5
> +--
> +2.17.1
> diff --git a/package/nxp/qoriq-rcw/0002-ls1028ardb-Enable-CLK_OUT_PMUX-for-GPIO-function.patch b/package/nxp/qoriq-rcw/0002-ls1028ardb-Enable-CLK_OUT_PMUX-for-GPIO-function.patch
> new file mode 100644
> index 0000000000..4f00541d69
> --- /dev/null
> +++ b/package/nxp/qoriq-rcw/0002-ls1028ardb-Enable-CLK_OUT_PMUX-for-GPIO-function.patch
> @@ -0,0 +1,40 @@
> +From 4a3c9ea5d0c7bf8eec8cb6276d6f4d940f3946db Mon Sep 17 00:00:00 2001
> +From: Jerry Huang <jerry.huang@nxp.com>
> +Date: Thu, 19 Sep 2019 12:13:48 +0800
> +Subject: [PATCH 2/2] ls1028ardb/rcw: Enable CLK_OUT_PMUX for GPIO function
> +
> +Signed-off-by: Jianchao Wang <jianchao.wang@nxp.com>
> +Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
> +---
> + ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw | 2 +-
> + ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw | 2 +-
> + 2 files changed, 2 insertions(+), 2 deletions(-)
> +
> +diff --git a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
> +index 5466a63..a5ed4d4 100644
> +--- a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
> ++++ b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
> +@@ -28,7 +28,7 @@ IIC3_PMUX=2
> + IIC4_PMUX=2
> + IIC5_PMUX=1
> + IIC6_PMUX=2
> +-CLK_OUT_PMUX=2
> ++CLK_OUT_PMUX=1
> + EC1_SAI4_5_PMUX=5
> + EC1_SAI3_6_PMUX=5
> + USB3_CLK_FSEL=39
> +diff --git a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
> +index 1908d8c..c930b83 100644
> +--- a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
> ++++ b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
> +@@ -28,7 +28,7 @@ IIC3_PMUX=2
> + IIC4_PMUX=2
> + IIC5_PMUX=1
> + IIC6_PMUX=3
> +-CLK_OUT_PMUX=2
> ++CLK_OUT_PMUX=1
> + EC1_SAI4_5_PMUX=5
> + EC1_SAI3_6_PMUX=5
> + USB3_CLK_FSEL=39
> +--
> +2.17.1
>
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [Buildroot] [PATCH v5 8/9] package/nxp/qoriq-rcw: introduce BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE for boot mode
2020-02-07 8:38 ` [Buildroot] [PATCH v5 8/9] package/nxp/qoriq-rcw: introduce BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE for boot mode Changming Huang
@ 2022-01-06 15:55 ` Arnout Vandecappelle
0 siblings, 0 replies; 20+ messages in thread
From: Arnout Vandecappelle @ 2022-01-06 15:55 UTC (permalink / raw)
To: Changming Huang, buildroot
Cc: thomas.petazzoni, heiko.thiery, michael, geomatsi, matthew.weber
On 07/02/2020 09:38, Changming Huang wrote:
> Introduce BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE for the boot mode.
> Because the RCW binary can be stored in different media, for example:
> sd - RCW locate in SD card, boot the board from SD card
> emmc - RCW locate in eMMC chip, boot the board from eMMC chip
> qspi - RCW locate in QSPI flash, boot the board from QSPI flash
> flexspi_nor - RCW locate in flexSPI, boot the board from flexSPI Nor/Nand flash
>
> Signed-off-by: Changming Huang <jerry.huang@nxp.com>
> ---
> changes since v4:
> no changes.
>
> changes since v3:
> 1. split this option from board patch.
> ---
> package/nxp/qoriq-rcw/Config.in.host | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/package/nxp/qoriq-rcw/Config.in.host b/package/nxp/qoriq-rcw/Config.in.host
> index 9bf55894e8..7f5fbb3202 100644
> --- a/package/nxp/qoriq-rcw/Config.in.host
> +++ b/package/nxp/qoriq-rcw/Config.in.host
> @@ -37,4 +37,10 @@ config BR2_PACKAGE_HOST_QORIQ_RCW_BIN
>
> If this option is empty, no rcw file is used.
>
> +config BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE
You introduce this symbol but it is not used anywhere. So what is the point?
I marked it as rejected.
Regards,
Arnout
> + string "QorIQ RCW Boot mode"
> + depends on !BR2_PACKAGE_HOST_QORIQ_RCW_CUSTOM_PATH
> + help
> + Specify the boot mode, for example, sd, emmc, flexspi_nor.
> +
> endif
>
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [Buildroot] [PATCH v5 9/9] board/nxp/ls1028ardb: new board
2020-02-07 8:38 ` [Buildroot] [PATCH v5 9/9] board/nxp/ls1028ardb: new board Changming Huang
@ 2022-01-06 16:27 ` Arnout Vandecappelle
0 siblings, 0 replies; 20+ messages in thread
From: Arnout Vandecappelle @ 2022-01-06 16:27 UTC (permalink / raw)
To: Changming Huang, buildroot
Cc: thomas.petazzoni, heiko.thiery, michael, geomatsi, matthew.weber
On 07/02/2020 09:38, Changming Huang wrote:
> This is to support NXP LS1028ARDB board in Buildroot.
> The board is setup to track the Linux at 4.19 via NXP LSDK-19.09.
>
> The target will build uboot and RCW binary with arm-trusted-firmware support.
>
> board/nxp/ls1028ardb/: scripts related with ls1028ardb
> nxp_ls1028ardb-64b_defconfig: defconfig boot from SD card
>
> Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Due to the changes in other packages and because some of the previous patches
weren't applied, this defconfig wouldn't be valid any more so I marked it as
Changes Requested.
[snip]
> diff --git a/board/nxp/common/ls/busybox.config b/board/nxp/common/ls/busybox.config
> new file mode 100644
> index 0000000000..7074c65aa6
> --- /dev/null
> +++ b/board/nxp/common/ls/busybox.config
Since you're only adding a single board here, I prefer to put it in the
board-specific directory, and to move it to common/ later if it turns out to be
indeed shared. But that's a minor thing.
> @@ -0,0 +1,9 @@
> +#
> +# Additional Busybox Settings
> +#
> +CONFIG_TASKSET=y
> +CONFIG_FEATURE_TASKSET_FANCY=y
> +CONFIG_FEATURE_DF_FANCY=y
> +CONFIG_FEATURE_SEAMLESS_GZ=y
> +CONFIG_FEATURE_SEAMLESS_BZ2=y
> +CONFIG_FEATURE_SEAMLESS_XZ=y
I understand that you probably need taskset on a LayerScape (although, is it
used by anything in this defconfig?). But I don't understand why you need all
the rest. Please explain that in the commit message.
> diff --git a/board/nxp/ls1028ardb/genimage.sd.cfg.template b/board/nxp/ls1028ardb/genimage.sd.cfg.template
> new file mode 100644
> index 0000000000..ab50e103c1
> --- /dev/null
> +++ b/board/nxp/ls1028ardb/genimage.sd.cfg.template
> @@ -0,0 +1,52 @@
> +# Minimal SD card image for the NXP boards Template
> +#
> +# SD card image (sdcard.img) format:
> +# * the SD card must have 4 kB free space at the beginning,
> +# * U-Boot is dumped as is,
> +# * a FAT partition at offset 64 MB is containing Image and DTB files
I don't know if it's possible for this board, but generally we prefer to use
the modern organisation with just a single rootfs partition which has the kernel
and extlinux.conf in /boot. U-Boot should support that. But if that's an unusual
configuration for this board, it's OK to keep it as is.
> +# * a single root filesystem partition is required (ext2, ext3 or ext4)
> +#
> +
> +image boot.vfat {
> + vfat {
> + files = {
> + %FILES%
> + }
> + }
> + size = 256M
Isn't that way too much? I think it should fit in something like 16M, no?
> +}
> +
> +image sdcard.img {
> + hdimage {
> + }
> +
> + partition rcw {
> + in-partition-table = "no"
> + image = "bl2_sd.pbl"
> + offset = 4096
> + }
> +
> + partition u-boot {
> + in-partition-table = "no"
> + image = "fip.bin"
> + offset = 1M
> + }
> +
> + partition u-boot-environment {
> + in-partition-table = "no"
> + image = "uboot-env.bin"
> + offset = 5M
> + }
> +
> + partition boot {
> + partition-type = 0xC
> + bootable = "true"
> + image = "boot.vfat"
> + offset = 64M
Isnt this way too much? Everything before fits in 8M, so why such a large offset?
> + }
> +
> + partition rootfs {
> + partition-type = 0x83
> + image = "rootfs.ext2"
> + }
> +}
> diff --git a/board/nxp/ls1028ardb/post-image.sh b/board/nxp/ls1028ardb/post-image.sh
> new file mode 100755
> index 0000000000..c655074386
> --- /dev/null
> +++ b/board/nxp/ls1028ardb/post-image.sh
> @@ -0,0 +1,57 @@
> +#!/usr/bin/env bash
> +# args from BR2_ROOTFS_POST_SCRIPT_ARGS
> +# $2 linux building directory
> +# $3 buildroot top directory
> +# $4 u-boot building directory
AFAICS none of these arguments are actually used, so just remove them.
> +
> +#
> +# dtb_list extracts the list of DTB files from BR2_LINUX_KERNEL_INTREE_DTS_NAME
> +# in ${BR_CONFIG}, then prints the corresponding list of file names for the
> +# genimage configuration file
> +#
> +dtb_file()
> +{
> + local DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([\/a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})"
> +
> + for dt in $DTB_LIST; do
> + echo -n "\"`basename $dt`.dtb\", "
> + done
> +}
Why not just ls $(BINARIES_DIR)/*.dtb ?
> +
> +#
> +# genimage.sd.cfg.template: Boot from SD
> +# genimage.emmc.cfg.template: Boot from eMMC
> +#
> +genimage_type()
> +{
> + if grep -Eq "^BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE=\"emmc\"$" ${BR2_CONFIG}; then
Ah, this is where you use boot mode! This is really not OK, we can't have a
generic option in a package that gets used in a board specific config.
In this case it's pretty simple: you only have sd support in this defconfig,
so hardcode sd. If you later want to add another defconfig with emmc, you can
add it as a BR2_ROOTFS_POST_SCRIPT_ARGS argument to the script.
> + echo "genimage.emmc.cfg.template"
> + elif grep -Eq "^BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE=\"sd\"$" ${BR2_CONFIG}; then
> + echo "genimage.sd.cfg.template"
> + fi
> +}
> +
> +main()
> +{
> + local FILES="$(dtb_file) "ls1028a-dp-fw.bin", "Image""
Just for my information: who is consuming that firmware file? Since it's in
the FAT partition, I guess it's not loaded by the kernel, but by U-Boot or ATF
or something?
> + local GENIMAGE_CFG="$(mktemp --suffix genimage.cfg)"
> + local GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> +
> + sed -e "s/%FILES%/${FILES}/" \
> + board/nxp/ls1028ardb/$(genimage_type) > ${GENIMAGE_CFG}
You can avoid the board/nxp/ls1028ardb hardcoding by using ${0%/*}
${0%/*}/genimage.$2.cfg.template > ${GENIMAGE_CFG}
> +
> + rm -rf "${GENIMAGE_TMP}"
> +
> + genimage \
> + --rootpath "${TARGET_DIR}" \
> + --tmppath "${GENIMAGE_TMP}" \
> + --inputpath "${BINARIES_DIR}" \
> + --outputpath "${BINARIES_DIR}" \
> + --config "${GENIMAGE_CFG}"
> +
> + rm -f ${GENIMAGE_CFG}
> +
> + exit $?
> +}
> +
> +main $@
main "$@"
> diff --git a/board/nxp/ls1028ardb/readme.txt b/board/nxp/ls1028ardb/readme.txt
> new file mode 100644
> index 0000000000..713babd7c3
> --- /dev/null
> +++ b/board/nxp/ls1028ardb/readme.txt
> @@ -0,0 +1,61 @@
> +LS1028ARDB board is one platform based on LS1028A silicon for industry,
> +which is supported in LSDK-19.09.
> +
> +One simple image file is created by buildroot, which includes RCW, uboot,
> +Linux kernel, rootfs and other necessary binaries for this board.
> +
> +To program the image file created by buildroot into the flash.
> +There are two way to do it:
> +
> +1. Program the image file on PC machine for SD card boot
> + $ sudo dd if=./output/images/sdcard.img of=/dev/sdx
> + # or in some other host machine:
> + $ sudo dd if=./output/images/sdcard.img of=/dev/mmcblkx
> +
> + # find the right SD Card device name in your host machine and replace the
> + # “sdx” or “mmcblkx”.
> +
> +2. Program the image file on board for eMMC and XSPI boot
> +Make sure your board has ipaddr, netmask, and serverip defined to reach your
> +tftp server.
> +
> + 2.1 Program eMMC boot image file to eMMC chip
> + # Make sure output/images/sdcard.img is stored to tftp server
If you can simply use the SD image for eMMC as well, why do you distinguish
between them?
> + # Below command is one example
> + => tftpboot 0xa0000000 sdcard.img
> + => mmc dev 1
> + => mmc erase 0 0x200000
> + => mmc write 0xa0000000 0 0x200000
> +
> + # The size "0x200000" will be changed when the image size is different.
> +
> + 2.2 Program XSPI boot image file to flash
> + # Make sure output/images/xspi.cpio.img is stored to tftp server
> + # Below command is one example
> + => tftpboot 0xa0000000 xspi.cpio.img
Where does this xspi.cpio.img come from?
> + => sf probe
> + => sf erase 0 $filesize
> + => sf write 0xa0000000 0 $filesize
> +
> +3. Booting your new system
> +Before booting the new system, we should make sure the switch setting is right.
> +below switch setting is for each booting mode:
> + +-----------+---------------------+
> + |Boot mode | Switch setting |
> + +---------------------------------+
> + |SD boot | SW2[1~4] = 0b’1000 |
> + +---------------------------------+
> + |eMMC boot | SW2[1~4] = 0b’1001 |
> + +---------------------------------+
> + |XSPI boot | SW2[1~4] = 0b’1111 |
> + +-----------+---------------------+
> +
> +or we use following command to reset the board in uboot prompt:
> + # boot from SD card
> + => qixis_reset sd
> +
> + # boot from eMMC chip
> + => qixis_reset emmc
> +
> + # boot from XSPI
> + => qixis_reset qspi
> diff --git a/board/nxp/ls1028ardb/rootfs_overlay/etc/udev/rules.d/10-network.rules b/board/nxp/ls1028ardb/rootfs_overlay/etc/udev/rules.d/10-network.rules
> new file mode 100644
> index 0000000000..19f41634bd
> --- /dev/null
> +++ b/board/nxp/ls1028ardb/rootfs_overlay/etc/udev/rules.d/10-network.rules
> @@ -0,0 +1,16 @@
> +# ENETC rules
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.0", DRIVERS=="fsl_enetc", NAME:="eno0"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.1", DRIVERS=="fsl_enetc", NAME:="eno1"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.2", DRIVERS=="fsl_enetc", NAME:="eno2"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.6", DRIVERS=="fsl_enetc", NAME:="eno3"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.0", DRIVERS=="fsl_enetc_vf", NAME:="eno0vf0"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.1", DRIVERS=="fsl_enetc_vf", NAME:="eno0vf1"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.2", DRIVERS=="fsl_enetc_vf", NAME:="eno1vf0"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.3", DRIVERS=="fsl_enetc_vf", NAME:="eno1vf1"
> +# LS1028 switch rules
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p0", NAME="swp0"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p1", NAME="swp1"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p2", NAME="swp2"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p3", NAME="swp3"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p4", NAME="swp4"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p5", NAME="swp5"
> diff --git a/board/nxp/ls1028ardb/u-boot-environment-sd.txt b/board/nxp/ls1028ardb/u-boot-environment-sd.txt
> new file mode 100644
> index 0000000000..f91e6b585f
> --- /dev/null
> +++ b/board/nxp/ls1028ardb/u-boot-environment-sd.txt
> @@ -0,0 +1,13 @@
> +baudrate=115200
> +bootcmd=setenv bootargs root=/dev/mmcblk0p2 rootwait rw earlycon=uart8250,0x21c0500 console=ttyS0,115200 cma=256M video=1920x1080-32@60;mmcinfo;fatload mmc 0:1 ${dp_load} ${dp_file}; hdp load ${dp_load} ${dp_offset};fatload mmc 0:1 ${loadaddr} ${bootfile};fatload mmc 0:1 ${fdtaddr} ${fdtfile};booti ${loadaddr} - ${fdtaddr}
> +bootdelay=3
> +bootfile=Image
> +fdtfile=fsl-ls1028a-rdb.dtb
> +loadaddr=0xa0000000
> +fdtaddr=0xb0000000
> +dp_file=ls1028a-dp-fw.bin
> +dp_load=0x90000000
> +dp_offset=0x2000
> +stderr=serial
> +stdin=serial
> +stdout=serial
> diff --git a/configs/nxp_ls1028ardb-64b_defconfig b/configs/nxp_ls1028ardb-64b_defconfig
> new file mode 100644
> index 0000000000..cb0131a35c
> --- /dev/null
> +++ b/configs/nxp_ls1028ardb-64b_defconfig
> @@ -0,0 +1,85 @@
> +# Architecture
> +BR2_aarch64=y
> +BR2_cortex_a72=y
> +
> +# Filesystem
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +
> +# Hostname and issue
> +BR2_TARGET_GENERIC_HOSTNAME="LS1028ARDB"
> +
> +# toolchain
> +BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
Why a glibc toolchain?
> +BR2_TOOLCHAIN_BUILDROOT_LIBC="glibc"
This is a blind symbol, shouldn't be set in the defconfig.
> +
> +# Linux headers same as kernel
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
> +
> +# bootloader
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BOARDNAME="ls1028ardb_tfa"
> +BR2_TARGET_UBOOT_CUSTOM_GIT=y
> +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/u-boot"
> +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="LSDK-19.09-update-311219"
> +BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_FORMAT_BIN=n
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-dtb.bin"
> +BR2_PACKAGE_UBOOT_TOOLS_MKIMAGE=y
Why do you need mkimage on the target? (host-uboot-tools is built
automatically by selecting envimage below).
> +BR2_TARGET_UBOOT_ENVIMAGE=y
> +BR2_TARGET_UBOOT_ENVIMAGE_SOURCE="board/nxp/ls1028ardb/u-boot-environment-sd.txt"
> +BR2_TARGET_UBOOT_ENVIMAGE_SIZE="0x2000"
> +
> +# Kernel
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_GIT=y
> +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/linux"
> +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="LSDK-19.09-update-311219-V4.19"
> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.config"
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-ls1028a-rdb"
> +BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
> +BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
Why doesn't BR2_LINUX_KERNEL_IMAGE work?
> +
> +# Serial port config
> +BR2_TARGET_GENERIC_GETTY=y
This is already the default.
> +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
The default "console" should work, doesn't it?
> +
> +# required tools to create the microSD image
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/nxp/ls1028ardb/post-image.sh"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="$(LINUX_DIR) $(TOPDIR) $(UBOOT_DIR)"
> +
> +# busybox setting
> +BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES="board/nxp/common/ls/busybox.config"
> +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
> +
> +# packages for rcw
> +BR2_PACKAGE_HOST_QORIQ_RCW=y
> +BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE="sd"
> +BR2_PACKAGE_HOST_QORIQ_RCW_BIN="ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.bin"
> +
> +#Display port firmware
> +BR2_PACKAGE_QORIQ_CADENCE_DP_FIRMWARE=y
> +
> +#eudev support
> +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
It would be good to explain in the commit message why this is needed.
Regards,
Arnout
> +BR2_ROOTFS_OVERLAY="board/nxp/ls1028ardb/rootfs_overlay"
> +
> +# Arm-Trusted-Firmware
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE="u-boot-dtb.bin"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/atf"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="LSDK-19.09-update-311219"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1028ardb"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_sd.pbl"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS="pbl"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_DEPENDENCIES="host-qoriq-rcw"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="BOOT_MODE=sd RCW=$(BINARIES_DIR)/rcw_1300_sdboot.bin"
>
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2022-01-06 16:28 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-07 8:38 [Buildroot] [PATCH v5 1/9] package/nxp: new package directory Changming Huang
2020-02-07 8:38 ` [Buildroot] [PATCH v5 2/9] package/qoriq-rcw: move rcw into nxp and rename it Changming Huang
2020-04-14 9:35 ` Heiko Thiery
2020-12-16 21:02 ` Yann E. MORIN
2020-02-07 8:38 ` [Buildroot] [PATCH v5 3/9] package/qoriq-rcw: bump to version LSDK-19.09 Changming Huang
2020-02-07 8:38 ` [Buildroot] [PATCH v5 4/9] package/qoriq-rcw: add target rcw binary support Changming Huang
2022-01-06 14:48 ` Arnout Vandecappelle
2020-02-07 8:38 ` [Buildroot] [PATCH v5 5/9] boot/arm-trusted-firmware: allow additional make dependencies Changming Huang
2022-01-06 15:05 ` Arnout Vandecappelle
2020-02-07 8:38 ` [Buildroot] [PATCH v5 6/9] package/qoriq-cadence-dp-firmware: new package Changming Huang
2022-01-06 15:14 ` Michael Walle
2022-01-06 15:19 ` Arnout Vandecappelle
2020-02-07 8:38 ` [Buildroot] [PATCH v5 7/9] package/qoriq-rcw:Enable IIC5_PMUX and CLK_OUT_PMUX for GPIO Changming Huang
2022-01-06 15:54 ` Arnout Vandecappelle
2020-02-07 8:38 ` [Buildroot] [PATCH v5 8/9] package/nxp/qoriq-rcw: introduce BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE for boot mode Changming Huang
2022-01-06 15:55 ` Arnout Vandecappelle
2020-02-07 8:38 ` [Buildroot] [PATCH v5 9/9] board/nxp/ls1028ardb: new board Changming Huang
2022-01-06 16:27 ` Arnout Vandecappelle
2022-01-06 14:45 ` [Buildroot] [PATCH v5 1/9] package/nxp: new package directory Arnout Vandecappelle
2022-01-06 15:00 ` Michael Walle
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.