All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
	qemu-devel@nongnu.org, qemu-arm@nongnu.org,
	peter.maydell@linaro.org, jean-philippe@linaro.org,
	dgilbert@redhat.com, quintela@redhat.com, mst@redhat.com,
	peterx@redhat.com
Cc: kevin.tian@intel.com, bharatb.linux@gmail.com, tnowicki@marvell.com
Subject: [PATCH v14 01/11] virtio-iommu: Add skeleton
Date: Fri,  7 Feb 2020 10:31:53 +0100	[thread overview]
Message-ID: <20200207093203.3788-2-eric.auger@redhat.com> (raw)
In-Reply-To: <20200207093203.3788-1-eric.auger@redhat.com>

This patchs adds the skeleton for the virtio-iommu device.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

---

v13 -> v14:
- use device_class_set_props
- updated copyright's year

v12 -> v13
- removed IOMMU_PCI_BUS_MAX and IOMMU_PCI_DEVFN_MAX

v11 -> v12:
- remove s_by_bus_num
- drop set_features (rely on default implementation) and
  acked_features

v9 -> v10:
- mutex initialized here
- initialize tail
- included hw/qdev-properties.h
- removed g_memdup
- removed s->config.domain_range.start = 0;

v9 -> v10:
- expose VIRTIO_IOMMU_F_MMIO feature
- s/domain_bits/domain_range struct
- change error codes
- enforce unmigratable
- Kconfig

v7 -> v8:
- expose VIRTIO_IOMMU_F_BYPASS and VIRTIO_F_VERSION_1
  features
- set_config dummy implementation + tracing
- add trace in get_features
- set the features on realize() and store the acked ones
- remove inclusion of linux/virtio_iommu.h

v6 -> v7:
- removed qapi-event.h include
- add primary_bus and associated property

v4 -> v5:
- use the new v0.5 terminology (domain, endpoint)
- add the event virtqueue

v3 -> v4:
- use page_size_mask instead of page_sizes
- added set_features()
- added some traces (reset, set_status, set_features)
- empty virtio_iommu_set_config() as the driver MUST NOT
  write to device configuration fields
- add get_config trace

v2 -> v3:
- rebase on 2.10-rc0, ie. use IOMMUMemoryRegion and remove
  iommu_ops.
- advertise VIRTIO_IOMMU_F_MAP_UNMAP feature
- page_sizes set to TARGET_PAGE_SIZE

Conflicts:
	hw/virtio/trace-events
---
 hw/virtio/Kconfig                |   5 +
 hw/virtio/Makefile.objs          |   1 +
 hw/virtio/trace-events           |   7 +
 hw/virtio/virtio-iommu.c         | 265 +++++++++++++++++++++++++++++++
 include/hw/virtio/virtio-iommu.h |  57 +++++++
 5 files changed, 335 insertions(+)
 create mode 100644 hw/virtio/virtio-iommu.c
 create mode 100644 include/hw/virtio/virtio-iommu.h

diff --git a/hw/virtio/Kconfig b/hw/virtio/Kconfig
index f87def27a6..d29525b36f 100644
--- a/hw/virtio/Kconfig
+++ b/hw/virtio/Kconfig
@@ -9,6 +9,11 @@ config VIRTIO_RNG
     default y
     depends on VIRTIO
 
+config VIRTIO_IOMMU
+    bool
+    default y
+    depends on VIRTIO
+
 config VIRTIO_PCI
     bool
     default y if PCI_DEVICES
diff --git a/hw/virtio/Makefile.objs b/hw/virtio/Makefile.objs
index de0f5fc39b..2fd9da7410 100644
--- a/hw/virtio/Makefile.objs
+++ b/hw/virtio/Makefile.objs
@@ -16,6 +16,7 @@ obj-$(call land,$(CONFIG_VIRTIO_CRYPTO),$(CONFIG_VIRTIO_PCI)) += virtio-crypto-p
 obj-$(CONFIG_VIRTIO_PMEM) += virtio-pmem.o
 common-obj-$(call land,$(CONFIG_VIRTIO_PMEM),$(CONFIG_VIRTIO_PCI)) += virtio-pmem-pci.o
 obj-$(call land,$(CONFIG_VHOST_USER_FS),$(CONFIG_VIRTIO_PCI)) += vhost-user-fs-pci.o
+obj-$(CONFIG_VIRTIO_IOMMU) += virtio-iommu.o
 obj-$(CONFIG_VHOST_VSOCK) += vhost-vsock.o
 
 ifeq ($(CONFIG_VIRTIO_PCI),y)
diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
index e28ba48da6..02d93d7f63 100644
--- a/hw/virtio/trace-events
+++ b/hw/virtio/trace-events
@@ -53,3 +53,10 @@ virtio_mmio_write_offset(uint64_t offset, uint64_t value) "virtio_mmio_write off
 virtio_mmio_guest_page(uint64_t size, int shift) "guest page size 0x%" PRIx64 " shift %d"
 virtio_mmio_queue_write(uint64_t value, int max_size) "mmio_queue write 0x%" PRIx64 " max %d"
 virtio_mmio_setting_irq(int level) "virtio_mmio setting IRQ %d"
+
+# hw/virtio/virtio-iommu.c
+virtio_iommu_device_reset(void) "reset!"
+virtio_iommu_get_features(uint64_t features) "device supports features=0x%"PRIx64
+virtio_iommu_device_status(uint8_t status) "driver status = %d"
+virtio_iommu_get_config(uint64_t page_size_mask, uint64_t start, uint64_t end, uint32_t domain_range, uint32_t probe_size) "page_size_mask=0x%"PRIx64" start=0x%"PRIx64" end=0x%"PRIx64" domain_range=%d probe_size=0x%x"
+virtio_iommu_set_config(uint64_t page_size_mask, uint64_t start, uint64_t end, uint32_t domain_range, uint32_t probe_size) "page_size_mask=0x%"PRIx64" start=0x%"PRIx64" end=0x%"PRIx64" domain_bits=%d probe_size=0x%x"
diff --git a/hw/virtio/virtio-iommu.c b/hw/virtio/virtio-iommu.c
new file mode 100644
index 0000000000..30579267d5
--- /dev/null
+++ b/hw/virtio/virtio-iommu.c
@@ -0,0 +1,265 @@
+/*
+ * virtio-iommu device
+ *
+ * Copyright (c) 2020 Red Hat, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/iov.h"
+#include "qemu-common.h"
+#include "hw/qdev-properties.h"
+#include "hw/virtio/virtio.h"
+#include "sysemu/kvm.h"
+#include "trace.h"
+
+#include "standard-headers/linux/virtio_ids.h"
+
+#include "hw/virtio/virtio-bus.h"
+#include "hw/virtio/virtio-access.h"
+#include "hw/virtio/virtio-iommu.h"
+
+/* Max size */
+#define VIOMMU_DEFAULT_QUEUE_SIZE 256
+
+static int virtio_iommu_handle_attach(VirtIOIOMMU *s,
+                                      struct iovec *iov,
+                                      unsigned int iov_cnt)
+{
+    return VIRTIO_IOMMU_S_UNSUPP;
+}
+static int virtio_iommu_handle_detach(VirtIOIOMMU *s,
+                                      struct iovec *iov,
+                                      unsigned int iov_cnt)
+{
+    return VIRTIO_IOMMU_S_UNSUPP;
+}
+static int virtio_iommu_handle_map(VirtIOIOMMU *s,
+                                   struct iovec *iov,
+                                   unsigned int iov_cnt)
+{
+    return VIRTIO_IOMMU_S_UNSUPP;
+}
+static int virtio_iommu_handle_unmap(VirtIOIOMMU *s,
+                                     struct iovec *iov,
+                                     unsigned int iov_cnt)
+{
+    return VIRTIO_IOMMU_S_UNSUPP;
+}
+
+static void virtio_iommu_handle_command(VirtIODevice *vdev, VirtQueue *vq)
+{
+    VirtIOIOMMU *s = VIRTIO_IOMMU(vdev);
+    struct virtio_iommu_req_head head;
+    struct virtio_iommu_req_tail tail = {};
+    VirtQueueElement *elem;
+    unsigned int iov_cnt;
+    struct iovec *iov;
+    size_t sz;
+
+    for (;;) {
+        elem = virtqueue_pop(vq, sizeof(VirtQueueElement));
+        if (!elem) {
+            return;
+        }
+
+        if (iov_size(elem->in_sg, elem->in_num) < sizeof(tail) ||
+            iov_size(elem->out_sg, elem->out_num) < sizeof(head)) {
+            virtio_error(vdev, "virtio-iommu bad head/tail size");
+            virtqueue_detach_element(vq, elem, 0);
+            g_free(elem);
+            break;
+        }
+
+        iov_cnt = elem->out_num;
+        iov = elem->out_sg;
+        sz = iov_to_buf(iov, iov_cnt, 0, &head, sizeof(head));
+        if (unlikely(sz != sizeof(head))) {
+            tail.status = VIRTIO_IOMMU_S_DEVERR;
+            goto out;
+        }
+        qemu_mutex_lock(&s->mutex);
+        switch (head.type) {
+        case VIRTIO_IOMMU_T_ATTACH:
+            tail.status = virtio_iommu_handle_attach(s, iov, iov_cnt);
+            break;
+        case VIRTIO_IOMMU_T_DETACH:
+            tail.status = virtio_iommu_handle_detach(s, iov, iov_cnt);
+            break;
+        case VIRTIO_IOMMU_T_MAP:
+            tail.status = virtio_iommu_handle_map(s, iov, iov_cnt);
+            break;
+        case VIRTIO_IOMMU_T_UNMAP:
+            tail.status = virtio_iommu_handle_unmap(s, iov, iov_cnt);
+            break;
+        default:
+            tail.status = VIRTIO_IOMMU_S_UNSUPP;
+        }
+        qemu_mutex_unlock(&s->mutex);
+
+out:
+        sz = iov_from_buf(elem->in_sg, elem->in_num, 0,
+                          &tail, sizeof(tail));
+        assert(sz == sizeof(tail));
+
+        virtqueue_push(vq, elem, sizeof(tail));
+        virtio_notify(vdev, vq);
+        g_free(elem);
+    }
+}
+
+static void virtio_iommu_get_config(VirtIODevice *vdev, uint8_t *config_data)
+{
+    VirtIOIOMMU *dev = VIRTIO_IOMMU(vdev);
+    struct virtio_iommu_config *config = &dev->config;
+
+    trace_virtio_iommu_get_config(config->page_size_mask,
+                                  config->input_range.start,
+                                  config->input_range.end,
+                                  config->domain_range.end,
+                                  config->probe_size);
+    memcpy(config_data, &dev->config, sizeof(struct virtio_iommu_config));
+}
+
+static void virtio_iommu_set_config(VirtIODevice *vdev,
+                                      const uint8_t *config_data)
+{
+    struct virtio_iommu_config config;
+
+    memcpy(&config, config_data, sizeof(struct virtio_iommu_config));
+    trace_virtio_iommu_set_config(config.page_size_mask,
+                                  config.input_range.start,
+                                  config.input_range.end,
+                                  config.domain_range.end,
+                                  config.probe_size);
+}
+
+static uint64_t virtio_iommu_get_features(VirtIODevice *vdev, uint64_t f,
+                                          Error **errp)
+{
+    VirtIOIOMMU *dev = VIRTIO_IOMMU(vdev);
+
+    f |= dev->features;
+    trace_virtio_iommu_get_features(f);
+    return f;
+}
+
+/*
+ * Migration is not yet supported: most of the state consists
+ * of balanced binary trees which are not yet ready for getting
+ * migrated
+ */
+static const VMStateDescription vmstate_virtio_iommu_device = {
+    .name = "virtio-iommu-device",
+    .unmigratable = 1,
+};
+
+static void virtio_iommu_device_realize(DeviceState *dev, Error **errp)
+{
+    VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+    VirtIOIOMMU *s = VIRTIO_IOMMU(dev);
+
+    virtio_init(vdev, "virtio-iommu", VIRTIO_ID_IOMMU,
+                sizeof(struct virtio_iommu_config));
+
+    s->req_vq = virtio_add_queue(vdev, VIOMMU_DEFAULT_QUEUE_SIZE,
+                             virtio_iommu_handle_command);
+    s->event_vq = virtio_add_queue(vdev, VIOMMU_DEFAULT_QUEUE_SIZE, NULL);
+
+    s->config.page_size_mask = TARGET_PAGE_MASK;
+    s->config.input_range.end = -1UL;
+    s->config.domain_range.end = 32;
+
+    virtio_add_feature(&s->features, VIRTIO_RING_F_EVENT_IDX);
+    virtio_add_feature(&s->features, VIRTIO_RING_F_INDIRECT_DESC);
+    virtio_add_feature(&s->features, VIRTIO_F_VERSION_1);
+    virtio_add_feature(&s->features, VIRTIO_IOMMU_F_INPUT_RANGE);
+    virtio_add_feature(&s->features, VIRTIO_IOMMU_F_DOMAIN_RANGE);
+    virtio_add_feature(&s->features, VIRTIO_IOMMU_F_MAP_UNMAP);
+    virtio_add_feature(&s->features, VIRTIO_IOMMU_F_BYPASS);
+    virtio_add_feature(&s->features, VIRTIO_IOMMU_F_MMIO);
+
+    qemu_mutex_init(&s->mutex);
+}
+
+static void virtio_iommu_device_unrealize(DeviceState *dev, Error **errp)
+{
+    VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+
+    virtio_cleanup(vdev);
+}
+
+static void virtio_iommu_device_reset(VirtIODevice *vdev)
+{
+    trace_virtio_iommu_device_reset();
+}
+
+static void virtio_iommu_set_status(VirtIODevice *vdev, uint8_t status)
+{
+    trace_virtio_iommu_device_status(status);
+}
+
+static void virtio_iommu_instance_init(Object *obj)
+{
+}
+
+static const VMStateDescription vmstate_virtio_iommu = {
+    .name = "virtio-iommu",
+    .minimum_version_id = 1,
+    .version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_VIRTIO_DEVICE,
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static Property virtio_iommu_properties[] = {
+    DEFINE_PROP_LINK("primary-bus", VirtIOIOMMU, primary_bus, "PCI", PCIBus *),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void virtio_iommu_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
+
+    device_class_set_props(dc, virtio_iommu_properties);
+    dc->vmsd = &vmstate_virtio_iommu;
+
+    set_bit(DEVICE_CATEGORY_MISC, dc->categories);
+    vdc->realize = virtio_iommu_device_realize;
+    vdc->unrealize = virtio_iommu_device_unrealize;
+    vdc->reset = virtio_iommu_device_reset;
+    vdc->get_config = virtio_iommu_get_config;
+    vdc->set_config = virtio_iommu_set_config;
+    vdc->get_features = virtio_iommu_get_features;
+    vdc->set_status = virtio_iommu_set_status;
+    vdc->vmsd = &vmstate_virtio_iommu_device;
+}
+
+static const TypeInfo virtio_iommu_info = {
+    .name = TYPE_VIRTIO_IOMMU,
+    .parent = TYPE_VIRTIO_DEVICE,
+    .instance_size = sizeof(VirtIOIOMMU),
+    .instance_init = virtio_iommu_instance_init,
+    .class_init = virtio_iommu_class_init,
+};
+
+static void virtio_register_types(void)
+{
+    type_register_static(&virtio_iommu_info);
+}
+
+type_init(virtio_register_types)
diff --git a/include/hw/virtio/virtio-iommu.h b/include/hw/virtio/virtio-iommu.h
new file mode 100644
index 0000000000..d24ba63305
--- /dev/null
+++ b/include/hw/virtio/virtio-iommu.h
@@ -0,0 +1,57 @@
+/*
+ * virtio-iommu device
+ *
+ * Copyright (c) 2020 Red Hat, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef QEMU_VIRTIO_IOMMU_H
+#define QEMU_VIRTIO_IOMMU_H
+
+#include "standard-headers/linux/virtio_iommu.h"
+#include "hw/virtio/virtio.h"
+#include "hw/pci/pci.h"
+
+#define TYPE_VIRTIO_IOMMU "virtio-iommu-device"
+#define VIRTIO_IOMMU(obj) \
+        OBJECT_CHECK(VirtIOIOMMU, (obj), TYPE_VIRTIO_IOMMU)
+
+typedef struct IOMMUDevice {
+    void         *viommu;
+    PCIBus       *bus;
+    int           devfn;
+    IOMMUMemoryRegion  iommu_mr;
+    AddressSpace  as;
+} IOMMUDevice;
+
+typedef struct IOMMUPciBus {
+    PCIBus       *bus;
+    IOMMUDevice  *pbdev[0]; /* Parent array is sparse, so dynamically alloc */
+} IOMMUPciBus;
+
+typedef struct VirtIOIOMMU {
+    VirtIODevice parent_obj;
+    VirtQueue *req_vq;
+    VirtQueue *event_vq;
+    struct virtio_iommu_config config;
+    uint64_t features;
+    GHashTable *as_by_busptr;
+    PCIBus *primary_bus;
+    GTree *domains;
+    QemuMutex mutex;
+    GTree *endpoints;
+} VirtIOIOMMU;
+
+#endif
-- 
2.20.1



  reply	other threads:[~2020-02-07  9:34 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-07  9:31 [PATCH v14 00/11] VIRTIO-IOMMU device Eric Auger
2020-02-07  9:31 ` Eric Auger [this message]
2020-02-07  9:31 ` [PATCH v14 02/11] virtio-iommu: Decode the command payload Eric Auger
2020-02-07  9:31 ` [PATCH v14 03/11] virtio-iommu: Implement attach/detach command Eric Auger
2020-02-07 20:26   ` Peter Xu
2020-02-08 11:50     ` Auger Eric
2020-02-07  9:31 ` [PATCH v14 04/11] virtio-iommu: Implement map/unmap Eric Auger
2020-02-07  9:31 ` [PATCH v14 05/11] virtio-iommu: Implement translate Eric Auger
2020-02-07  9:31 ` [PATCH v14 06/11] virtio-iommu: Implement fault reporting Eric Auger
2020-02-07  9:31 ` [PATCH v14 07/11] virtio-iommu-pci: Add virtio iommu pci support Eric Auger
2020-02-07  9:32 ` [PATCH v14 08/11] virtio-iommu-pci: Introduce the x-dt-binding option Eric Auger
2020-02-07 10:05   ` Jean-Philippe Brucker
2020-02-07 10:19     ` Auger Eric
2020-02-07 10:24     ` Michael S. Tsirkin
2020-02-07 10:33       ` Auger Eric
2020-02-07 23:04       ` Peter Xu
2020-02-09 20:58         ` Michael S. Tsirkin
2020-02-10 16:48           ` Peter Xu
2020-02-07 10:23   ` Michael S. Tsirkin
2020-02-07 10:51     ` Auger Eric
2020-02-07 11:15       ` Jean-Philippe Brucker
2020-02-07 13:36         ` Auger Eric
2020-02-07 12:00       ` Michael S. Tsirkin
2020-02-07 13:38         ` Auger Eric
2020-02-07  9:32 ` [PATCH v14 09/11] hw/arm/virt: Add the virtio-iommu device tree mappings Eric Auger
2020-02-07  9:32 ` [PATCH v14 10/11] virtio-iommu: Support migration Eric Auger
2020-02-07  9:32 ` [PATCH v14 11/11] tests: Add virtio-iommu test Eric Auger
2020-02-07 10:11 ` [PATCH v14 00/11] VIRTIO-IOMMU device no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200207093203.3788-2-eric.auger@redhat.com \
    --to=eric.auger@redhat.com \
    --cc=bharatb.linux@gmail.com \
    --cc=dgilbert@redhat.com \
    --cc=eric.auger.pro@gmail.com \
    --cc=jean-philippe@linaro.org \
    --cc=kevin.tian@intel.com \
    --cc=mst@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=peterx@redhat.com \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    --cc=tnowicki@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.