All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3 0/6] Split SDM845 interconnect nodes and consolidate RPMh support
@ 2020-02-09 18:34 Sibi Sankar
  2020-02-09 18:34 ` [PATCH v3 1/6] dt-bindings: interconnect: Convert qcom,sdm845 to DT schema Sibi Sankar
                   ` (6 more replies)
  0 siblings, 7 replies; 16+ messages in thread
From: Sibi Sankar @ 2020-02-09 18:34 UTC (permalink / raw)
  To: robh+dt, georgi.djakov, evgreen
  Cc: bjorn.andersson, agross, linux-kernel, devicetree, linux-arm-msm,
	mark.rutland, daidavid1, saravanak, mka, linux-pm, Sibi Sankar

While there are no current consumers of the SDM845 interconnect device in
devicetree, take this opportunity to redefine the interconnect device nodes
as the previous definitions of using a single child node under the apps_rsc
device did not accurately capture the description of the hardware.
The Network-On-Chip (NoC) interconnect devices should be represented in a
manner akin to QCS404 platforms[1] where there is a separation of NoC devices
and its RPM/RPMh counterparts.

The bcm-voter devices are representing the RPMh devices that the interconnect
providers need to communicate with and there can be more than one instance of
the Bus Clock Manager (BCM) which can live under different instances of Resource
State Coordinators (RSC). There are display use cases where consumers may need
to target a different bcm-voter (Some display specific RSC) than the default,
and there needs to be a way to represent this connection in devicetree.

This patches series extends the discussions[2][3] involving the SDM845
interconnect bindings by adding accompanying driver implementations
using the split NoC devices. Some of the code used to support the SDM845
provider driver are refactored into common modules that can used by other
RPMh based interconnect providers such as SC7180[4]. This patch series also
updates existing sdm845 binding documentation to DT schema format using
json-schema.

v3:
- Picked up Robs R-b for patch 1 
- Fixup qcom,bcm-voter.yaml. comments (Rob)
- Use qcom,bcm-voter instead of SoC specific compatible for
  SDM845 and SC7180 (Odelu/Sibi)
- Fixup bindings check failures for qcom,sdm845.yaml
- Fixup the misc bugs. comments (Evan/Sibi)
- Fixup reg size for aggre1/2_noc

v2: 
- Reorganized dt-binding patches
- Fixed a bug that adds duplicate BCM node to voter (Georgi)
- Addressed misc. comments (Georgi)

v1: https://lkml.org/lkml/2019/12/16/15

[1]: https://lkml.org/lkml/2019/6/13/143
[2]: https://lkml.org/lkml/2019/7/19/1063
[3]: https://lkml.org/lkml/2019/10/16/1793
[4]: https://lkml.org/lkml/2019/11/26/389

David Dai (6):
  dt-bindings: interconnect: Convert qcom,sdm845 to DT schema
  dt-bindings: interconnect: Add YAML schemas for QCOM bcm-voter
  dt-bindings: interconnect: Update Qualcomm SDM845 DT bindings
  interconnect: qcom: Consolidate interconnect RPMh support
  interconnect: qcom: sdm845: Split qnodes into their respective NoCs
  arm64: dts: sdm845: Redefine interconnect provider DT nodes

 .../bindings/interconnect/qcom,bcm-voter.yaml |   45 +
 .../bindings/interconnect/qcom,sdm845.txt     |   24 -
 .../bindings/interconnect/qcom,sdm845.yaml    |   74 +
 arch/arm64/boot/dts/qcom/sdm845.dtsi          |   65 +-
 drivers/interconnect/qcom/Kconfig             |   13 +-
 drivers/interconnect/qcom/Makefile            |    4 +
 drivers/interconnect/qcom/bcm-voter.c         |  366 +++++
 drivers/interconnect/qcom/bcm-voter.h         |   27 +
 drivers/interconnect/qcom/icc-rpmh.c          |  147 ++
 drivers/interconnect/qcom/icc-rpmh.h          |  149 +++
 drivers/interconnect/qcom/sdm845.c            | 1185 +++++++----------
 .../dt-bindings/interconnect/qcom,sdm845.h    |  263 ++--
 12 files changed, 1516 insertions(+), 846 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
 delete mode 100644 Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt
 create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml
 create mode 100644 drivers/interconnect/qcom/bcm-voter.c
 create mode 100644 drivers/interconnect/qcom/bcm-voter.h
 create mode 100644 drivers/interconnect/qcom/icc-rpmh.c
 create mode 100644 drivers/interconnect/qcom/icc-rpmh.h

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, other threads:[~2020-03-04 16:23 UTC | newest]

Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-09 18:34 [PATCH v3 0/6] Split SDM845 interconnect nodes and consolidate RPMh support Sibi Sankar
2020-02-09 18:34 ` [PATCH v3 1/6] dt-bindings: interconnect: Convert qcom,sdm845 to DT schema Sibi Sankar
2020-02-09 18:34 ` [PATCH v3 2/6] dt-bindings: interconnect: Add YAML schemas for QCOM bcm-voter Sibi Sankar
2020-02-18 21:31   ` Rob Herring
2020-02-09 18:34 ` [PATCH v3 3/6] dt-bindings: interconnect: Update Qualcomm SDM845 DT bindings Sibi Sankar
2020-02-18 21:31   ` Rob Herring
2020-02-09 18:34 ` [PATCH v3 4/6] interconnect: qcom: Consolidate interconnect RPMh support Sibi Sankar
2020-02-27 13:44   ` Georgi Djakov
2020-02-27 21:52   ` Evan Green
2020-02-09 18:34 ` [PATCH v3 5/6] interconnect: qcom: sdm845: Split qnodes into their respective NoCs Sibi Sankar
2020-02-27 21:52   ` Evan Green
2020-02-09 18:34 ` [PATCH v3 6/6] arm64: dts: sdm845: Redefine interconnect provider DT nodes Sibi Sankar
2020-02-27 13:45   ` Georgi Djakov
2020-02-27 21:52   ` Evan Green
2020-02-25  5:16 ` [PATCH v3 0/6] Split SDM845 interconnect nodes and consolidate RPMh support Bjorn Andersson
2020-03-04 16:23   ` Georgi Djakov

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.