All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Monjalon <thomas@monjalon.net>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 1/2] config: deduplicate options
Date: Wed, 12 Feb 2020 00:57:23 +0100	[thread overview]
Message-ID: <20200211235724.2970097-2-thomas@monjalon.net> (raw)
In-Reply-To: <20200211235724.2970097-1-thomas@monjalon.net>

Some config options are overwritten with the same value
as the one inherited from its template parent.
Such duplicates which have no meaningful comments are removed.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
---
 config/common_armv8a_linux                    | 2 --
 config/common_linux                           | 6 ------
 config/defconfig_arm-armv7a-linuxapp-gcc      | 9 ---------
 config/defconfig_arm64-octeontx2-linuxapp-gcc | 4 ----
 config/defconfig_arm64-stingray-linuxapp-gcc  | 2 --
 config/defconfig_arm64-thunderx-linuxapp-gcc  | 1 -
 6 files changed, 24 deletions(-)

diff --git a/config/common_armv8a_linux b/config/common_armv8a_linux
index 433e66c7d8..020f8f006c 100644
--- a/config/common_armv8a_linux
+++ b/config/common_armv8a_linux
@@ -41,5 +41,3 @@ CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=n
 # NXP PFE PMD Driver
 #
 CONFIG_RTE_LIBRTE_PFE_PMD=y
-
-CONFIG_RTE_SCHED_VECTOR=n
diff --git a/config/common_linux b/config/common_linux
index 583efadc7d..816810671a 100644
--- a/config/common_linux
+++ b/config/common_linux
@@ -66,9 +66,3 @@ CONFIG_RTE_LIBRTE_HINIC_PMD=y
 # Hisilicon HNS3 PMD driver
 #
 CONFIG_RTE_LIBRTE_HNS3_PMD=y
-
-#
-# Compile PMD for Intel FPGA raw device
-# To compile, CONFIG_RTE_EAL_VFIO should be enabled.
-#
-CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n
diff --git a/config/defconfig_arm-armv7a-linuxapp-gcc b/config/defconfig_arm-armv7a-linuxapp-gcc
index 6ac7f47e47..9ecc2a526c 100644
--- a/config/defconfig_arm-armv7a-linuxapp-gcc
+++ b/config/defconfig_arm-armv7a-linuxapp-gcc
@@ -30,14 +30,7 @@ CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n
 # KNI is not supported on 32-bit
 CONFIG_RTE_LIBRTE_KNI=n
 
-# PCI is usually not used on ARM
-CONFIG_RTE_EAL_IGB_UIO=n
-
-# fails to compile on ARM
-CONFIG_RTE_SCHED_VECTOR=n
-
 # cannot use those on ARM
-CONFIG_RTE_KNI_KMOD=n
 CONFIG_RTE_LIBRTE_ARK_PMD=n
 CONFIG_RTE_LIBRTE_EM_PMD=n
 CONFIG_RTE_LIBRTE_IGB_PMD=n
@@ -47,9 +40,7 @@ CONFIG_RTE_LIBRTE_ENIC_PMD=n
 CONFIG_RTE_LIBRTE_FM10K_PMD=n
 CONFIG_RTE_LIBRTE_I40E_PMD=n
 CONFIG_RTE_LIBRTE_IXGBE_PMD=n
-CONFIG_RTE_LIBRTE_MLX4_PMD=n
 CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
-CONFIG_RTE_LIBRTE_BNX2X_PMD=n
 CONFIG_RTE_LIBRTE_QEDE_PMD=n
 CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n
 CONFIG_RTE_LIBRTE_AVP_PMD=n
diff --git a/config/defconfig_arm64-octeontx2-linuxapp-gcc b/config/defconfig_arm64-octeontx2-linuxapp-gcc
index 7687dbec8d..7cfb81872c 100644
--- a/config/defconfig_arm64-octeontx2-linuxapp-gcc
+++ b/config/defconfig_arm64-octeontx2-linuxapp-gcc
@@ -6,7 +6,6 @@
 
 CONFIG_RTE_MACHINE="octeontx2"
 
-CONFIG_RTE_CACHE_LINE_SIZE=128
 CONFIG_RTE_MAX_NUMA_NODES=1
 CONFIG_RTE_MAX_LCORE=24
 CONFIG_RTE_ARM_FEATURE_ATOMICS=y
@@ -15,8 +14,5 @@ CONFIG_RTE_ARM_FEATURE_ATOMICS=y
 CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
 CONFIG_RTE_LIBRTE_VHOST_NUMA=n
 
-# Recommend to use VFIO as co-processors needs SMMU/IOMMU
-CONFIG_RTE_EAL_IGB_UIO=n
-
 # Max supported NIX LFs
 CONFIG_RTE_MAX_VFIO_GROUPS=128
diff --git a/config/defconfig_arm64-stingray-linuxapp-gcc b/config/defconfig_arm64-stingray-linuxapp-gcc
index 7b33aa7afb..2a6f6cee28 100644
--- a/config/defconfig_arm64-stingray-linuxapp-gcc
+++ b/config/defconfig_arm64-stingray-linuxapp-gcc
@@ -5,7 +5,6 @@
 #include "defconfig_arm64-armv8a-linux-gcc"
 
 # Broadcom - Stingray
-CONFIG_RTE_MACHINE="armv8a"
 CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72"
 
 # Doesn't support NUMA
@@ -13,4 +12,3 @@ CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
 CONFIG_RTE_LIBRTE_VHOST_NUMA=n
 
 CONFIG_RTE_EAL_IGB_UIO=y
-CONFIG_RTE_KNI_KMOD=n
diff --git a/config/defconfig_arm64-thunderx-linuxapp-gcc b/config/defconfig_arm64-thunderx-linuxapp-gcc
index a52f066510..946906b67a 100644
--- a/config/defconfig_arm64-thunderx-linuxapp-gcc
+++ b/config/defconfig_arm64-thunderx-linuxapp-gcc
@@ -6,7 +6,6 @@
 
 CONFIG_RTE_MACHINE="thunderx"
 
-CONFIG_RTE_CACHE_LINE_SIZE=128
 CONFIG_RTE_USE_C11_MEM_MODEL=n
 CONFIG_RTE_MAX_NUMA_NODES=2
 CONFIG_RTE_MAX_LCORE=96
-- 
2.25.0


  reply	other threads:[~2020-02-11 23:57 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-11 23:57 [dpdk-dev] [PATCH 0/2] cleanup makefile config and testing Thomas Monjalon
2020-02-11 23:57 ` Thomas Monjalon [this message]
2020-02-12  9:39   ` [dpdk-dev] [PATCH 1/2] config: deduplicate options David Marchand
2020-02-11 23:57 ` [dpdk-dev] [PATCH 2/2] devtools: enable more config options in build test Thomas Monjalon
2020-02-12 10:00   ` David Marchand
2020-02-12 10:31 ` [dpdk-dev] [PATCH 0/2] cleanup makefile config and testing David Marchand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200211235724.2970097-2-thomas@monjalon.net \
    --to=thomas@monjalon.net \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.