All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: jani.nikula@intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v2 1/7] drm/i915: Iterate over pipe and skip the disabled one
Date: Wed, 12 Feb 2020 15:50:12 +0200	[thread overview]
Message-ID: <20200212135012.GB13686@intel.com> (raw)
In-Reply-To: <20200211172532.14287-2-anshuman.gupta@intel.com>

On Tue, Feb 11, 2020 at 10:55:26PM +0530, Anshuman Gupta wrote:
> It should not be assumed that a disabled display pipe will be
> always last the pipe.
> for_each_pipe() should iterate over I915_MAX_PIPES and check
> for the disabled pipe and skip that pipe so that it should not
> initialize the intel crtc for any disabled pipes.
> 
> Below compilation error require to be handle due to change in
> for_each_pipe() macro.
> "suggest explicit braces to avoid ambiguous ‘else’ [-Werror=dangling-else]"
> 
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.h | 5 +++--
>  drivers/gpu/drm/i915/i915_irq.c              | 6 ++++--
>  2 files changed, 7 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> index 75438a136d58..7a531e485b53 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.h
> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> @@ -313,10 +313,11 @@ enum phy_fia {
>  };
>  
>  #define for_each_pipe(__dev_priv, __p) \
> -	for ((__p) = 0; (__p) < INTEL_NUM_PIPES(__dev_priv); (__p)++)
> +	for ((__p) = 0; (__p) < I915_MAX_PIPES; (__p)++) \
> +		for_each_if((INTEL_INFO(__dev_priv)->pipe_mask) & BIT(__p))
>  
>  #define for_each_pipe_masked(__dev_priv, __p, __mask) \
> -	for ((__p) = 0; (__p) < INTEL_NUM_PIPES(__dev_priv); (__p)++) \
> +	for_each_pipe(__dev_priv, __p) \
>  		for_each_if((__mask) & BIT(__p))

You didn't address my comments for this stuff! Please don't leave
review comments unaddressed, it's just wasting everyone's time.

>  
>  #define for_each_cpu_transcoder_masked(__dev_priv, __t, __mask) \
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index 3d0cd0960bd2..a26f2bf1b6ea 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -1739,11 +1739,12 @@ static void ibx_irq_handler(struct drm_i915_private *dev_priv, u32 pch_iir)
>  	if (pch_iir & SDE_POISON)
>  		drm_err(&dev_priv->drm, "PCH poison interrupt\n");
>  
> -	if (pch_iir & SDE_FDI_MASK)
> +	if (pch_iir & SDE_FDI_MASK) {
>  		for_each_pipe(dev_priv, pipe)
>  			drm_dbg(&dev_priv->drm, "  pipe %c FDI IIR: 0x%08x\n",
>  				pipe_name(pipe),
>  				I915_READ(FDI_RX_IIR(pipe)));
> +	}
>  
>  	if (pch_iir & (SDE_TRANSB_CRC_DONE | SDE_TRANSA_CRC_DONE))
>  		drm_dbg(&dev_priv->drm, "PCH transcoder CRC done interrupt\n");
> @@ -1823,11 +1824,12 @@ static void cpt_irq_handler(struct drm_i915_private *dev_priv, u32 pch_iir)
>  	if (pch_iir & SDE_AUDIO_CP_CHG_CPT)
>  		drm_dbg(&dev_priv->drm, "Audio CP change interrupt\n");
>  
> -	if (pch_iir & SDE_FDI_MASK_CPT)
> +	if (pch_iir & SDE_FDI_MASK_CPT) {
>  		for_each_pipe(dev_priv, pipe)
>  			drm_dbg(&dev_priv->drm, "  pipe %c FDI IIR: 0x%08x\n",
>  				pipe_name(pipe),
>  				I915_READ(FDI_RX_IIR(pipe)));
> +	}
>  
>  	if (pch_iir & SDE_ERROR_CPT)
>  		cpt_serr_int_handler(dev_priv);
> -- 
> 2.24.0

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2020-02-12 13:50 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-11 17:25 [Intel-gfx] [PATCH v2 0/7] 3 display pipes combination system support Anshuman Gupta
2020-02-11 17:25 ` [Intel-gfx] [PATCH v2 1/7] drm/i915: Iterate over pipe and skip the disabled one Anshuman Gupta
2020-02-12 13:50   ` Ville Syrjälä [this message]
2020-02-18 16:41     ` Anshuman Gupta
2020-02-11 17:25 ` [Intel-gfx] [PATCH v2 2/7] drm/i915: Remove (pipe == crtc->index) assumption Anshuman Gupta
2020-02-20 17:12   ` Ville Syrjälä
2020-02-11 17:25 ` [Intel-gfx] [PATCH v2 3/7] drm/i915: Fix broken transcoder err state Anshuman Gupta
2020-02-20 17:16   ` Ville Syrjälä
2020-02-20 20:02     ` Ville Syrjälä
2020-02-11 17:25 ` [Intel-gfx] [PATCH v2 4/7] drm/i915: Fix wrongly populated plane possible_crtcs bit mask Anshuman Gupta
2020-02-20 17:17   ` Ville Syrjälä
2020-02-11 17:25 ` [Intel-gfx] [PATCH v2 5/7] drm/i915: Get first crtc instead of PIPE_A crtc Anshuman Gupta
2020-02-17  5:22   ` Anshuman Gupta
2020-02-17 14:17     ` Ville Syrjälä
2020-02-18 11:57       ` Anshuman Gupta
2020-02-11 17:25 ` [Intel-gfx] [PATCH v2 6/7] drm/i915: Add WARN_ON in intel_get_crtc_for_pipe() Anshuman Gupta
2020-02-11 17:25 ` [Intel-gfx] [PATCH v2 7/7] drm/i915: Fix broken num_entries in skl_ddb_allocation_overlaps Anshuman Gupta
2020-02-20 17:18   ` Ville Syrjälä
2020-02-12 20:31 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for 3 display pipes combination system support (rev3) Patchwork
2020-02-12 21:16 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-02-15 14:16 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200212135012.GB13686@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=anshuman.gupta@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.