Re: [PATCH v6 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line

[Jonathan Cameron <jic23@kernel.org>]

On Sun,  9 Feb 2020 16:10:56 -0800
Matt Ranostay <matt.ranostay@konsulko.com> wrote:

> Sensors don't actually need a interrupt line to give valid readings,
> and can triggered with CONFIG_IIO_HRTIMER_TRIGGER as well. Remove
> the required check for interrupt, and continue along in the probe
> function.
> 
> Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>

Hi Matt,

I'm going to hold this for conclusion of the discussion about whether
the interrupt enable / disable should be related to the buffer or the trigger.
(v4 I think...)

Thanks,

Jonathan

> ---
>  drivers/iio/chemical/atlas-sensor.c | 27 ++++++++++++---------------
>  1 file changed, 12 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/iio/chemical/atlas-sensor.c b/drivers/iio/chemical/atlas-sensor.c
> index 2f0a6fed2589..9a1ab9f8fcc5 100644
> --- a/drivers/iio/chemical/atlas-sensor.c
> +++ b/drivers/iio/chemical/atlas-sensor.c
> @@ -572,11 +572,6 @@ static int atlas_probe(struct i2c_client *client,
>  	if (ret)
>  		return ret;
>  
> -	if (client->irq <= 0) {
> -		dev_err(&client->dev, "no valid irq defined\n");
> -		return -EINVAL;
> -	}
> -
>  	ret = chip->calibration(data);
>  	if (ret)
>  		return ret;
> @@ -596,16 +591,18 @@ static int atlas_probe(struct i2c_client *client,
>  
>  	init_irq_work(&data->work, atlas_work_handler);
>  
> -	/* interrupt pin toggles on new conversion */
> -	ret = devm_request_threaded_irq(&client->dev, client->irq,
> -					NULL, atlas_interrupt_handler,
> -					IRQF_TRIGGER_RISING |
> -					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> -					"atlas_irq",
> -					indio_dev);
> -	if (ret) {
> -		dev_err(&client->dev, "request irq (%d) failed\n", client->irq);
> -		goto unregister_buffer;
> +	if (client->irq > 0) {
> +		/* interrupt pin toggles on new conversion */
> +		ret = devm_request_threaded_irq(&client->dev, client->irq,
> +				NULL, atlas_interrupt_handler,
> +				IRQF_TRIGGER_RISING |
> +				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> +				"atlas_irq",
> +				indio_dev);
> +
> +		if (ret)
> +			dev_warn(&client->dev,
> +				"request irq (%d) failed\n", client->irq);
>  	}
>  
>  	ret = atlas_set_powermode(data, 1);